A discussion on the energies involved in specific adsorption of ions

The change in specific adsorption of I^? ions on the series of metals Au, Hg, Bi, Pb, Cd, and Ga is analyzed using data of specifically adsorbed charge and shift in potential of zero charge. Factors determining the change in adsorbability are discussed in the light of previous formulations. It is shown that the work connected with water desorption as an ion becomes adsorbed, usually neglected or underestimated in previous discussions, is very likely to be the main factor determining the change in adsorbability along the series of metals. A rough estimation of energies involved in water desorption suggests that metal—water surface bonds are probably weak on sp-metals so that they are unable to affect the reactivity of metal surfaces with respect to the gas phase as strong covalent surface bonds are involved, for instance in the hydrogen evolution reaction. Conversely, the strong effect of water desorption on the specific adsorption of ions may be an indication of ion—metal interactions to be substantially independent of the nature of the metal. This suggests that covalent contributions to the surface bond are apparently minor for metals more electropositive than Au.     

Investigation of the specific adsorption of sulfate ions on powdered TiO2

The specific adsorption of radiolabeled sulfate ions from perchlorate supporting electrolyte onto TiO2 powder (anatase) has been investigated. The pH and concentration dependence of the adsorption was determined. Langmuir-like adsorption behavior similar to that on other oxides was found. From the pH dependence it follows that the protonation of the surface should precede the specific anion adsorption. The results obtained are compared with those reported for TiO2 bulk electrodes.     

The effect of specific adsorption of halide ions on electrochemical CO2 reduction

In the electrochemical CO₂ reduction reaction (CO₂RR), halide ions could impose a significant effect on multi-carbon (C₂₊) product production for Cu-based catalysts by a combined contribution from various mechanisms. However, the nature of specific adsorption of halide ions remains elusive due to the difficulty in decoupling different effects. This paper describes a facile method to actively immobilize the morphology of Cu-based catalysts during the CO₂RR, which makes it possible to reveal the fundamental mechanism of specific adsorption of halide ions. A stable morphology is obtained by pre-reduction in aqueous KX (X = Cl, Br, I) electrolytes followed by conducting the CO₂RR using non-buffered and non-specifically adsorbed K₂SO₄ as the supporting electrolyte, by which the change of local pH and cation concentration is also maintained during the CO₂RR. In situ spectroscopy revealed that the specific adsorption of halide ions enhances the adsorption of *CO intermediates, which enables a high selectivity of 84.5% for C₂₊ products in 1.0 M KI.

Reconstruction of catalyst morphology induced by halide ions over of Cu-based catalysts during CO₂ electroreduction is suppressed using K₂SO₄ as supporting electrolyte. Adsorption of halide ions is an enabling factor to enhance CO₂ electroreduction.     

Preparation of corn stalk-based adsorbents and their specific application in metal ions adsorption

Corn stalk-based adsorbents modified from corn stalk were prepared by Cu(0)-mediated reversible-deactivation radical polymerization (Cu(0)-mediated RDRP). They were applied to remove metal ions and they exhibited good adsorption capacity, especially for Hg(II). Adsorption properties of corn stalk can be enhanced by introducing cyano, amino, amidoxime, and carboxyl groups onto its surface, which results in efficient adsorbents for different metal ions. TGA, SEM, EA, and FTIR analyses were employed to characterize the structures of corn stalk-graft-polyacrylonitrile (CS-g-PAN), corn stalk-graft-polyacrylamide (CS-g-PAM), amidoxime corn stalk-graft-polyacrylonitrile (AO CS-g-PAN) and carboxyl corn stalk-graft-poly(methyl acrylate) (CO CS-g-PMA). The maximum adsorption capacity for Hg(II) was 8.06 mmol g^?1 of AO CS-g-PAN. Kinetics of the Hg(II) adsorption on AO CS-g-PAN was found to follow the pseudo-second-order model and the adsorption isotherms were well fitted with the Freundlich isotherm model.     

Effect of metal nature on energy of specific adsorption of chloride ions from dimethyl formamide solutions

The specific adsorption of chloride ions on the renewable liquid (Cd–Ga) electrode from mixed [0.1_m М LiCl + 0.1(1–_m) М LiBF₄] solutions in dimethyl formamide (DMF) is studied with an ac bridge at the following fractions of surface-active anion m: 0, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5 and 1. It is found that the data on the specific adsorption of Cl^– anion in the system can be quantitatively described by Frumkin’s isotherm. The free adsorption energy of Cl^– (ΔG _ads) is a quadratic function of electrode charge. The results are compared with the corresponding data for the Ga/DMF and (In–Ga)/DMF interfaces. It is shown that the adsorption energy of Cl–anions at the metal/DMF interface depends on the metal nature and increases in the series (In–Ga) ≈ (Cd–Ga) < Ga. The energy of metal–DMF chemisorption interaction, which hampers ion adsorption, increases in the same series. The analysis of the data uniquely indicates that the free energy of metal–Cl^– interaction (ΔG _M-CL-) increases in the series (In–Ga) ≈ (Cd–Ga) < Ga. Thus, in the series of electrodes studied, the variations in the energies of metal–Cl^– and metal–DMF specific interaction are correlated: the higher the energy of metal–DMF chemisorption interaction, the higher the energy of metal interaction with Cl^–.     

Electrokinetic properties of mixed solutions of dodecyldimethylamine oxide and sodium dodecyl sulfate: specific adsorption effects of small ions

Electrophoretic light-scattering measurements and potentiometric titrations were carried out on aqueous mixtures of dodecyldimethylamine oxide and sodium dodecyl sulfate. The electrophoretic mobility and the surface charge density of the micelles were always negative, ranging from –2.5 to –3.1×10^–4 cm²V^–1s^–1, and –0.033 to –0.045 cm^–2, respectively, for all surfactant mixing ratios, indicating the specific adsorption of Cl^–, in addition to Na⁺, on micelles. The solution pH, as well as the aggregation number previously reported, displayed maxima at intermediate surfactant mole fractions, that is, the non-ideal behavior. The fractional adsorption of Na⁺ per surfactant molecule in the micelles increased gradually with mixing fraction up to 0.82 atX=[SDS]/([SDS]+[C₁₂DAO])=1, while that of Cl^– decreased from 0.25 atX=0 to zero atX>0.4.     

Charge dependence of adsorption energy of ions at electrodes

Analysis of the energetic and geometric characteristics of the inner part of the electrical double layer has been carried out in the presence of the specific adsorption of ions accompanied by change in the dimensions and dielectric properties of the inner layer. On the basis of the formulae for the electrochemical potential of the adsorbed ion on the electrode surface and for the components of the inner layer capacity, the equations of the Frumkin isotherm and of its parameters have been derived. It has been shown that, in general, the Frumkin isotherm is non-linear at the given electrode charge and the charge dependence of the adsorption equilibrium constant has a parabolic form. The results of the corresponding theoretical calculations have been compared with the experimental data obtained by the study of the specific adsorption of tetra-alkylammonium cations on a bismuth electrode in ethanolic and aqueous solutions. Good agreement of the experimental results with those calculated theoretically confirm the validity of the equations derived.     

Some peculiarities in the specific adsorption of phosphate ions on hematite and gamma-Al2O3 as reflected by radiotracer studies

The specific adsorption of radiolabeled phosphate ions from perchlorate supporting electrolyte onto gamma-Al2O3 and hematite powder has been investigated. The pH dependence of the adsorption of phosphate species was compared with that of sulfate ions. It was demonstrated that in contrast to the behavior of sulfate ions the pH dependence of phosphate ions goes through a maximum. On the other hand, it was found that the reversible adsorption of phosphate ions is accompanied by the formation of strongly chemisorbed species. Results obtained from a study of the competitive adsorption of sulfate and phosphate ions at various pH values are reported and interpreted. An attempt is made to correlate the experimental findings with the models for anion adsorption reported in the literature.     

Modeling of specific adsorption of ions at electrodes during the passing from a mixed solution of constant ionic strength to a binary solution

Electrocapillary curves in the mc NaNO₃ + (1 ? m)c NaF mixed solutions are calculated in terms of the Alekseev-Popov-Kolotyrkin model. The analysis of limiting case m = 1 shows that in a NaNO₃ binary solution the model predicts quadratic dependence of the NO ₃ ^? anion adsorption energy on the potential, which contradicts to experimental data. A modification of the model is suggested, which allowed removing this contradiction.     

络合吸附伏安法同时测定多种重金属离子

在络合剂亚硝基苯胲 乙醇 乙酸铵体系中,Cr(Ⅵ)、Cd2 、Cu2 、Pb2 、Ni2 等离子都能在汞电极上产生灵敏的阴极络合吸附波,其二次导数伏安峰电流均与离子质量浓度有良好的线性关系,可用于这些离子的定量检测,测定线性范围为Cr(Ⅵ)0.0017～0.67μg mL、Cd2 0.0017～0.117μg mL、Cu2 0.0083～5 8μg mL、Pb2 0.083～1.25μg mL、Ni2 0.17～150μg mL,RSD分别为5.7%、1 3%、1.4%、2 5%和1.6%。方法为工业废水、地表水及生活用水等样品中重金属离子的同时测定提供了可靠、灵敏的检测方法。     

The effect of surface ions on water adsorption to mica

We have measured the adsorption isotherms of water on a single surface of freshly cleaved mica with K+ on the surface, and on mica where the K+ has been exchanged for H+. Using a very sensitive interferometric technique, we have found a significant difference between the two isotherms at submonolayer coverage, for relative vapor pressures p/p0 < 0.5. The K+-mica isotherm shows a pronounced convexity, suggesting distinct adsorption sites, whereas the H+-mica isotherm is flatter. The two isotherms converge above monolayer coverage. The results give a graphic demonstration of the importance of nanoscale surface heterogeneities for vapor adsorption at submonolayer coverage.     

Effects of pyrophosphate ions on protein adsorption onto calcium hydroxyapatite

The effects of pyrophosphate ions (PP: P2O7(4-)) on the adsorption of proteins onto calcium hydroxyapatite (Hap) were examined using typical proteins of bovine serum albumin (BSA: isoelectric point (iep) = 4.7, molecular mass (M(s)) = 67 200 Da, acidic protein), myoglobin (MGB: iep = 7.0, M(s) = 17 800 Da, neutral protein), and lysozyme (LSZ: iep = 11.1, M(s) = 14,600 Da, basic protein). The UV and CD measurements determined that both the secondary and the tertiary structures of protein molecules do not vary in the presence of PP. The adsorption of BSA was strongly depressed by the addition of PP in all the methods with changing the order of PP addition. Even if BSA was pre-adsorbed on the Hap surface, PP replaced BSA molecules by strong preferential adsorption onto Hap to reduce the amounts of adsorbed BSA. A similar effect was observed with the adsorption of MGB. On the other hand, the amount of adsorbed LSZ (n(LSZ)) was increased with an increase in the concentration of PP, and the n(LSZ) value showed a maximum point in each adsorption isotherm. This fact was explained by a compression of the electric double layer (EDL) around each LSZ molecule by PP. This compression of the EDL induced the reduction of lateral electrostatic repulsions between charged LSZ molecules on the Hap surface and enhanced the formation of closed-packed monolayers to raise the n(LSZ) value. However, since the number of PPs around a LSZ molecule is decreased by an increase in the LSZ concentration in each system, the thickness of the EDL may be increased. Hence, n(LSZ) was reduced again after the maximum point in each system. Tripolyphosphate (TPP: P3O10(5-)) ions exhibited similar effects on the adsorption behaviors of all proteins, but a much more pronounced effect was observed on the LSZ system. TPP with a higher eletronegativity shielded the EDL more highly than PP to increase the n(LSZ) value. The results of the zeta potential for all the protein systems supported the modes of protein adsorption discussed.     

On the adsorption mechanism of copper ions on bentonite clay

Russian Chemical Bulletin - The adsorption of copper ions on bentonite clay was studied as a function of the pH of the medium, contact time, and temperature. A comparative study of the...     

Effects in polarography attributable to specific adsorption of depolarizers

Summary Some effects in polarography produced by specific adsorption of the oxidised form of the depolarizer are discussed. It is suggested that this adsorption may lead to maxima in d.c. polarography when the depolarizer concentration is small and the solution has a high electrical conductivity. In normal pulse polarography specific adsorption of the oxidised form of the depolarizer may produce a maximum on the polarographic wave which is not basically due to streaming of the solution. Specific adsorption also leads to an increase in sensitivity in a.c. polarography and in R.F. polarography it produces asymmetry in the wave. Experimental results for lead ion in HClO₄ solutions containing varying amounts of Br^– ion suggest that as the concentration of Br^– increases, although the adsorbed species is probably at first PbBr⁺, eventually undissooiated PbBr₂ is strongly adsorbed.

---

Zusammenfassung Die Wirkung der spezifischen Adsorption der oxydierten Form des Depolarisators auf polarographische Bestimmungen wird erörtert. Diese Adsorption kann bei der Gleichstrompolarographie Maxima verursachen, wenn die Depolarisationskonzentration niedrig ist und die Lösung eine hohe elektrische Leitfähigkeit besitzt. Bei der normalen Pulspolarographie kann die spezifische Adsorption der oxydierten Form des Depolarisators auch ein Maximum verursachen, daß grundsätzlich nicht von einer Strömung der Lösung herrührt. Bei der Wechselstrompolarographie führt die spezifische Adsorption auch zu einer Zunahme der Empfindlichkeit und bei der Radiofrequenzpolarographie wird eine Asymmetrie der Stufen hervorgerufen. Versuche mit Bleiionen in perchlorsauren Lösungen mit verschiedenen Gehalten an Bromid zeigten, daß bei steigenden Br^–-Konzentrationen anfangs wahrscheinlich PbBr⁺, schließlich jedoch undissoziiertes PbBr₂ stark adsorbiert wird.

     

Microwave-assisted simple ion-exchange of ZSM-5-type zeolites with copper ions and their specific adsorption properties for N2 molecules at room temperature

Copper ion-exchanged ZSM-5 samples, prepared using an easy method that takes advantage of microwaves, exhibit a quite peculiar adsorption feature for dinitrogen molecules, in that a large volume of chemisorbed N2 was detected, even at room temperature, and the specificity of the adsorption properties was clarified by comparing with the properties of samples prepared by an ordinary ion-exchange method.