2‐(1H‐Benzotriazole‐1‐yl)‐1,1,3,3‐Tetramethyluronium Tetrafluoro Borate (TBTU) as an Efficient Coupling Reagent for the Esterification of Carboxylic acids with Alcohols and Phenols at Room Temperature

Esterification of carboxylic acids with alcohols and phenols by using 2‐(1H‐benzotriazole‐1‐yl)‐1,1,3,3‐tetramethyluronium tetrafluoroborate (TBTU) in the presence of triethylamine as a base proceeded smoothly under mild conditions to afford the corresponding esters in good to high yields in acetonitrile at room temperature.     

Synthesis and properties of nitrogen‐linked poly(2,7‐carbazole)s as hole‐transport material for organic light emitting diodes

A novel class of carbazole polymers, nitrogen‐linked poly(2,7‐carbazole)s, was synthesized by polycondensation between two bifunctional monomers using the palladium‐catalyzed amination reaction. The polymers were characterized by ¹H NMR, Infrared, Gel permeation chromatography, and MALDI‐TOF MS and it was revealed that the combination of the monomer structures is important for producing high molecular weight polymers. Thermal analysis indicated a good thermal stability with high glass transition temperatures, e.g., 138 °C for the higher molecular weight polymer P2 . To pursue the application possibilities of these polymers, their optical properties and energy levels were investigated by UV‐Vis absorption and fluorescence spectra as well as their electrochemical characteristics. Although the blue light emission was indeed observed for all polymers in solution, the quantum yields were very low and the solid films were not fluorescent. On the other hand, the HOMO levels of the polymers estimated from the onset potentials for the first oxidation in the solid thin films were relatively high in the range of ?5.12 to ?5.20 eV. Therefore, light emitting diodes employing these polymers as a hole‐transport layer and iridium(III) complex as a triplet emitter were fabricated. The device of the nitrogen‐linked poly(2,7‐carbazole) P3 with p,p′‐biphenyl spacer, which has a higher HOMO level and a higher molecular weight, showed a much better performance than the device of P2 with m‐phenylene spacer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3880–3891, 2009     

A New Class of Blue‐Emitting Materials for LED Applications: Triarylamine N‐Functionalised 2,7‐Linked Carbazole Polymers

Attachment of triarylamino‐functional groups at the 9‐position of 2,7‐linked carbazole polymers results in blue‐emitting materials with two independent redox processes that were attributed to the triarylamino groups and the polymer backbone, respectively. This new class of blue‐emitting conjugated polymers was prepared via a Suzuki cross‐coupling reaction and showed low turn‐on voltages in electroluminescent devices as a result of their low ionisation potentials. The photophysical, electrochemical and electroluminescent properties of these materials are discussed.

     

Two new isostructural mercury(II) complexes involving the N‐heterocyclic 1‐[(benzotriazol‐1‐yl)methyl]‐1H‐1,3‐imidazole ligand: syntheses,structures and properties

The unsymmetrical N‐heterocyclic ligand 1‐[(benzotriazol‐1‐yl)methyl]‐1H‐1,3‐imidazole (bmi) has three potential N‐atom donors and can act in monodentate or bridging coordination modes in the construction of complexes. In addition, the bmi ligand can adopt different coordination conformations, resulting in complexes with different structures due to the presence of the flexible methylene spacer. Two new complexes, namely bis{1‐[(benzotriazol‐1‐yl)methyl]‐1H‐1,3‐imidazole‐κN ³}dibromidomercury(II), [HgBr₂(C₁₀H₉N₅)₂], and bis{1‐[(benzotriazol‐1‐yl)methyl]‐1H‐1,3‐imidazole‐κN ³}diiodidomercury(II), [HgI₂(C₁₀H₉N₅)₂], have been synthesized through the self‐assembly of bmi with HgBr₂ or HgI₂. Single‐crystal X‐ray diffraction shows that both complexes are mononuclear structures, in which the bmi ligands coordinate to the Hg^II ions in monodentate modes. In the solid state, both complexes display three‐dimensional networks formed by a combination of hydrogen bonds and π–π interactions. The IR spectra and PXRD patterns of both complexes have also been recorded.     

Nonviral gene delivery using poly‐D/L aspartate‐diethylenetriamine cationic polymers and polyethylene glycol: A two‐step approach

Cationic polymers have received much attention as promising nonviral vectors for gene transfer. However, development of polymers with low cell toxicities and high transfection efficiencies continue to be a significant problem and a major hurdle to their success. Poly‐D /L aspartate‐diethylenetriamine poly(D /L Asp‐DET) polymers were synthesized and evaluated as nonviral gene delivery agents. Poly(D /L Asp‐DET) polymers display endosome buffering capacity. The polymers condense plasmid DNA above N:P ratios of 1 and form polyplex particles of ～50–100 nm, with zeta potentials between neutral and +40 mV. Transmission electron microscopy shows the polyplexes to be uniform in size and shape. Polyplexes maintain the structural integrity of DNA following incubation in nucleases and also show high transfection efficiencies with minimal toxicity in both HCT‐116 and PC‐3 cell culture. However, it is found that these poly(D /L Asp‐DET)/DNA polyplexes immediately aggregate in salt and serum conditions, making them unsuitable for use in vivo. Therefore, the polyplexes were further modified by covalent addition of polyethylene glycol (PEG). Introduction of this second step produces PEG‐polyplexes of uniform size (below 100 nm), with neutral zeta potentials that are also stable in both salt and serum conditions. These results suggest poly(D /L Asp‐DET) cationic polymers as potentially safe and efficient nonviral gene delivery agents. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of novel germanium‐containing poly(p‐phenylenevinylene) derivatives

Novel blue‐emitting germanium‐containing poly(p‐phenylenevinylene) (PPV) derivatives with well‐defined conjugation lengths were synthesized via Wittig‐condensation polymerizations. The polymers can be color‐tuned by the introduction of various chromophores into the PPV‐based polymer backbones. The photoluminescence (PL) spectra of the polymers, GePVK (containing carbazole moieties), GeMEH (containing dialkoxybenzene moieties), and GePTH (containing phenothiazine moieties), were found to exhibit blue, greenish blue, and green emissions, respectively. GePTH produces more red‐shifted emission than GeMEH and GEPVK, resulting in green emission, and the solution and solid state PL spectra of GePVK consist of almost blue emission. The electroluminescence spectra of GeMEH and GePTH contain yellowy green and yellow colors, respectively. Interestingly, GePVK exhibits white emission with CIE coordinates of (0.33, 0.37) due to electroplex emission in the light‐emitting diodes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 979–988, 2008     

Syntheses,Crystal Structures,and Photocatalytic Activities of Three Copper Coordination Polymers Based on Bis(1H‐imidazol‐4‐yl)benzene/3‐(2‐Pyridyl)pyrazole

Three copper(II) coordination polymers (CuCPs), namely, [Cu_0.5(1,4‐bib)(SO₄)_0.5]_n ( 1 ), {[Cu(1,3‐bib)₂(H₂O)] · SO₄ · H₂O}_n ( 2 ), and [Cu(bpz)(SO₄)_0.5]_n ( 3 ), were assembled from the reaction of three N‐donors [1,4‐bib = 1,4‐bis(1H‐imidazol‐4‐yl)benzene, 1,3‐bib = 1,3‐bis(1H‐imidazol‐4‐yl)benzene, and Hbpz = 3‐(2‐pyridyl)pyrazole] with copper sulfate under hydrothermal conditions. Their structures were determined by single‐crystal X‐ray diffraction analyses and further characterized by elemental analyses (EA), IR spectroscopy, powder X‐ray diffraction (PXRD), and thermogravimetric analyses (TGA). Structure analyses reveal that complex 1 is a 3D 6‐connected {4¹² · 6³}‐ pcu net, complex 2 is a fourfold 3D 4‐connected 6⁶‐ dia net, whereas complex 3 is a 1D snake‐like chain, which further expanded into 3D supramolecular architectures with the help of C–H ··· O hydrogen bonds. Moreover, the photocatalytic tests demonstrate that the obtained CuCPs are photocatalysts in the degradation of MB with the efficiency is 86.4 % for 1 , 75.3 % for 2 , and 91.3 % for 3 after 2 h, respectively.     

Synthesis,photophysics, and electroluminescent performance of stable blue‐light‐emitting copoly(9,9‐diarylfluorene)s

A series of fluorene derivatives containing nonsymmetric and bulky aromatic groups at C‐9 position were synthesized and used for the preparation of blue‐light‐emitting copolyfluorenes ( P1 – P4 ) by the Suzuki coupling polycondensation. The copolymers were characterized by molecular weight determination, elemental analysis, differential scanning calorimeter, thermogravimetric analysis, absorption and emission spectroscopy, cyclic voltammetry, and differential pulse voltammetry. Their decomposition temperatures and glass transition temperatures are 423–441 °C and >120 °C, respectively. In film state, the copolyfluorenes exhibit blue photoluminescence at 425–450 nm, which remains almost unchanged after annealing at 200 °C in air for 60 min. Polymer light‐emitting diodes [ITO/PEDOT:PSS/ P1 – P4 /Ca(50 nm)/Al(100 nm)] show stable blue‐light emission under device operation with the CIE co‐ordinates being between (0.16, 0.07) and (0.17, 0.09). The light‐emitting diodes devices from P1 and P3 containing electron‐deficient oxadiazole units display enhanced performance, with the maximum brightness and maximum current efficiency being (4510 cd/m² and 2.40 cd/A) and (2930 cd/m², 1.19 cd/A), respectively. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2821–2834, 2009     

Modular synthesis of polymers containing 2,5‐di(thiophenyl)‐N‐arylpyrrole

A modular and facile route has been developed to synthesize functionalized 2,5‐di(thiophen‐2‐yl)‐1‐H‐arylpyrroles from readily available starting materials. These units are compatible with various polymerization conditions and are versatile building blocks for conjugated polymers. The polymers show high thermal stability and solubility in a number of solvents. Characterization of the polymers reveals a correlation between molecular packing, controllable by polymer design, and charge carrier mobility. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1133–1139     

Poly(ProDOT‐Et2): A High‐Contrast,High‐Coloration Efficiency Electrochromic Polymer

The synthesis and electrochemical polymerization of 3,3‐diethyl‐3,4‐dihydro‐2H‐thieno‐[3,4‐b][1,4]dioxepine (ProDOT‐Et₂) was performed resulting in a stable electrochromic polymer capable of switching between an absorbing blue neutral state and a highly transmissive sky‐blue oxidized state in sub‐second time frames. High optical switching contrast ratios (up to 75% at λ_max) and high composite coloration efficiencies (505 cm²/C) were measured.     

Synthesis and properties of Polycaprolactone‐graft‐poly(2‐(dimethylamino)ethyl methacrylate‐co‐methoxy polyethylene glycol monomethacrylate) as non‐viral gene vector

Polycaprolactone‐graft‐Poly(2‐(dimethylamino)ethyl methacrylate‐co‐methoxy polyethylene glycol monomethacrylate) (PCL‐graft‐P(DMAEMA‐co‐mPEGMMA)) was synthesized by combination of ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). PCL‐graft‐P(DMAEMA‐co‐mPEGMMA) was characterized by FTIR, ¹H NMR, and GPC. PCL‐graft‐P(DMAEMA‐co‐mPEGMMA) with expected composition and structure was achieved. pH‐ and thermo‐sensitive properties of the PCL‐graft‐P(DMAEMA‐co‐mPEGMMA) nanoparticles prepared by the nanoprecipitation method were investigated by TEM and DLS. With increase in the temperature, the size of PCL‐graft‐P(DMAEMA‐co‐mPEGMMA) nanoparticles is decreased under base environment. Furthermore, in vitro transfection and toxicity assays were tested in 293T cells. The results indicate that PCL‐graft‐P(DMAEMA‐co‐PEGMMA) has lower cytotoxicity at N/P ratios less than 10 with transfection efficiency concomitantly reducing at N/P ratios less than 20 compared to PCL‐graft‐PDMAEMA as the control. However, PCL‐graft‐P(DMAEMA‐co‐PEGMMA) presents higher transfection efficiency at N/P ratios more than 20 compared to PCL‐graft‐PDMAEMA. Copyright © 2010 John Wiley & Sons, Ltd.     

Two different one‐dimensional supramolecular chains formed from the reaction of 2‐[1‐(pyridin‐4‐ylmethyl)‐1H‐benzimidazol‐2‐yl]quinoline with two different precursors,Co(NO3)2 and CoCl2

Two different one‐dimensional supramolecular chains with Co^II cations have been synthesized based on the semi‐rigid ligand 2‐[1‐(pyridin‐4‐ylmethyl)‐1H‐benzimidazol‐2‐yl]quinoline (L), obtained by condensation of 2‐(1H‐benzimidazol‐2‐yl)quinoline and 4‐(chloromethyl)pyridine hydrochloride. Starting from different Co^II salts, two new compounds have been obtained, viz. catena‐poly[[[dinitratocobalt(II)]‐μ‐2‐[1‐(pyridin‐4‐ylmethyl)‐1H‐benzimidazol‐2‐yl]quinoline] dichloromethane monosolvate acetonitrile monosolvate], {[Co(NO₃)₂(C₂₂H₁₆N₄)]·CH₂Cl₂·CH₃CN}_n, (I) and catena‐poly[[[dichloridocobalt(II)]‐μ‐2‐[1‐(pyridin‐4‐ylmethyl)‐1H‐benzimidazol‐2‐yl]quinoline] methanol disolvate], {[CoCl₂(C₂₂H₁₆N₄)]·2CH₃OH}_n, (II). In (I), the Co^II centres lie in a distorted octahedral [CoN₃O₃] coordination environment. {Co(NO₃)₂L}_n units form one‐dimensional helical chains, where the L ligand has different directions of twist. The helical chains stack together via interchain π–π interactions to form a two‐dimensional sheet, and another type of π–π interaction further connects neighbouring sheets into a three‐dimensional framework with hexagonal channels, in which the acetonitrile molecules and disordered dichloromethane molecules are located. In (II), the Co^II centres lie in a distorted trigonal–bipyramidal [CoCl₂N₃] coordination environment. {CoCl₂L}_n units form one‐dimensional chains. The chains interact via C—H...π and C—H...Cl interactions. The result is that two‐dimensional sheets are generated, which are further linked into a three‐dimensional framework via interlayer C—H...Cl interactions. When viewed down the crystallographic b axis, the methanol solvent molecules are located in an orderly manner in wave‐like channels.     

Design,Synthesis, and Evaluation of 3‐((4‐(t‐Butyl)‐2‐(2‐benzylidenehydrazinyl)thiazol‐5‐yl)methyl)quinolin‐2(1H)‐ones as Neuraminidase Inhibitors

A series of novel 3‐((4‐(t‐butyl)‐2‐(2‐benzylidenehydrazinyl)thiazol‐5‐yl)methyl)quinolin‐2(1H)‐ones ( 7a – 7z ) were designed, synthesized and evaluated for their ability of inhibiting neuraminidase (NA) of in?uenza H1N1 virus. Some compounds displayed moderate influenza NA inhibitory activity. Compound 7l with the scaffold of 2‐(2‐(2‐methoxybenzylidene)hydrazinyl)thiazole was the best one, exhibiting moderate NA inhibitory activity with IC₅₀ of 44.66 µmol/L. Structure‐activity relationship showed that compounds with methoxy or hydroxy groups at the ortho position, fluorine and nitro groups at the meta position and chlorine and bromine groups at the para position of phenyl ring were more active. Docking study indicated that compound 7l has important interactions with some key residues (including Asp151, Glu119, Arg292, Tyr406, and Asn347) and binds to 430‐cavity adjacent to NA active site.     

Green‐emitting poly[(1,3‐phenylenevinylene)‐alt‐ (1,4‐phenylenevinylene)]s: Effect of the substitution patterns on the optical properties

Green‐emitting substituted poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)]s ( 6 ) were synthesized via the Wittig–Horner reaction. The polymers were yellow resins with molecular weights of 10,600. The ultraviolet–visible (UV–vis) absorption of 6 (λ_max = 332 or 415 nm) was about 30 nm redshifted from that of poly[(2‐hexyloxy‐5‐methyl‐1,3‐phenylenevinylene)‐alt‐(1,4‐phenylenevinylene)] ( 2 ) but was only 5 nm redshifted with respect to that of poly[(1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)] ( 1 ). A comparison of the optical properties of 1 , 2 , and 6 showed that substitution on m‐ or p‐phenylene could slightly affect their energy gap and luminescence efficiency, thereby fine‐tuning the optical properties of the poly[(m‐phenylene vinylene)‐alt‐(p‐phenylene vinylene)] materials. The vibronic structures were assigned with the aid of low‐temperature UV–vis and fluorescence spectroscopy. Light‐emitting‐diode devices with 6 produced a green electroluminescence output (emission λ_max ～ 533 nm) with an external quantum efficiency of 0.32%. Substitution at m‐phenylene appeared to be effective in perturbing the charge‐injection process in LED devices. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1820–1829, 2004     

Design of a poly(L‐histidine)‐carbohydrate conjugate for a new pH‐sensitive drug carrier

A poly(L ‐histidine) (PLH)‐carbohydrate conjugate has been synthesized as a new macromolecule extracting pH‐dependent properties of PLH with imidazole groups. Because of poor water solubility at physiological pH, the application of PLH with a pK_a around 6.0 has been limited in spite of the native possession of the pH‐dependent property change at endosomal pH. Although the PLH modified with aliphatic primary amino groups suddenly precipitated out of the aqueous medium above pH 6.0 as a result of the deprotonation of the imidazole groups, the water solubility of PLH was improved at physiological pH by the conjugation of the aminated PLH with hydrophilic maltopentaose. The resulting PLH‐maltopentaose conjugates and metalloporphyrins formed the complexes which varied their assembling structure below pH 6.0. The PLH‐maltopentaose would be the fundamental compound for designing various drug carriers with the pH sensitivity at endosomal pH. Copyright © 2004 John Wiley & Sons, Ltd.     

(Co)polymers of oligo(ethylene glycol) methacrylates—temperature‐induced aggregation in aqueous solution

The synthesis and aggregation behavior of well‐defined thermosensitive (co)polymers of oligo(ethylene glycol) methacrylates (POEGMA) in aqueous solutions were investigated. The cloud points of the POEGMAs solutions were determined by turbidimetry and dynamic light scattering. For POEGMA (co)polymers the cloud point temperature (T_CP) increased linearly with increasing content of more hydrophilic comonomer. The mesoglobules formed by POEGMAs in dilute aqueous solutions above T_CP were studied by light scattering. The size of mesoglobules depended on the concentration and the heating procedures. The aggregates became smaller with decreasing initial concentration of polymer and increasing rates of temperature change. By selecting the proper heating and dilution procedures, the influence of the (co)polymer structure on the size of the mesoglobules could be determined. The size of the mesoglobules decreased with the length of the OEG side chains and increased with increasing content of more hydrophilic comonomer. The light scattering parameters of the mesoglobules—A₂ values and shape factors ${R_{\rm g}\over R_{\rm h}}$ —suggested that the hydrophilic OEG side chains placed at the periphery of the mesoglobules in direct contact with the surrounding water controlled the size of mesoglobules and their stability. Shape factors for all POEGMA mesoglobules indicated that the mesoglobules remained highly hydrated after formation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Reactions of 2‐Unsubstituted 1H‐Imidazole 3‐Oxides with 2,2‐Bis(trifluoromethyl)ethene‐1,1‐dicarbonitrile: A Stepwise 1,3‐Dipolar Cycloaddition

The reaction of 1,4,5‐trisubstituted 1H‐imidazole‐3‐oxides 1 with 2,2‐bis(trifluoromethyl)ethene‐1,1‐dicarbonitrile ( 7 , BTF) yielded the corresponding 1,3‐dihydro‐2H‐imidazol‐2‐ones 10 and 2‐(1,3‐dihydro‐2H‐imidazol‐2‐ylidene)malononitriles 11 , respectively, depending on the solvent used. In one example, a 1 : 1 complex, 12 , of the 1H‐imidazole 3‐oxide and hexafluoroacetone hydrate was isolated as a second product. The formation of the products is explained by a stepwise 1,3‐dipolar cycloaddition and subsequent fragmentation. The structures of 11d and 12 were established by X‐ray crystallography.     

三氯化铟高效催化3-(1-吡咯基)吲哚-2-酮类化合物的合成方法

使用三氯化铟在乙醇中回流的条件下催化不同的靛红衍生物与4-羟基脯氨酸反应,以较高的产率(83-99%)和纯度合成得到了相应的产物3-(1-吡咯基)吲哚-2-酮化合物,并对这个反应做了一个比较全面系统的研究.     

A Novel and Efficient Synthesis of 3‐[(4,5‐Dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐chromen‐2‐ones (=3‐[(4,5‐Dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐1‐benzopyran‐2‐ones)

An efficient one‐pot synthesis of 3‐[(4,5‐dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐chromen‐2‐one (=3‐[(4,5‐dihydro‐1H‐pyrrol‐3yl)carbonyl]‐2H‐1‐benzopyran‐2‐one) derivatives 4 by a four‐component reaction of a salicylaldehyde 1 , 4‐hydroxy‐6‐methyl‐2H‐pyran‐2‐one, a benzylamine 2 , and a diaroylacetylene (=1,4‐diarylbut‐2‐yne‐1,4‐dione) 3 in EtOH is reported. This new protocol has the advantages of high yields (Table), and convenient operation. The structures of these coumarin (=2H‐1‐benzopyran‐2‐one) derivatives, which are important compounds in organic chemistry, were confirmed spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this reaction is proposed (Scheme 2).     

Fluorene copolymers containing bithiophene/2,5‐ or 2,6‐pyridine units: A study of their optical,electrochemical, and electroluminescence properties

Two alternating copolymers, poly[(2,5‐di(2‐thienyl)‐pyridine‐5,5′‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)], PFO‐TPy25T, and poly[(2,6‐di(2‐thienyl)‐pyridine‐5,5′‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)], PFO‐TPy26T, were synthesized by the Pd‐catalyzed Suzuki polymerization method. The pyridine units are present as trimeric monomers in these copolymers and have different connectivities to their two neighboring thiophenes, para‐ and meta‐linkages. We investigated the variations in the optical and electrochemical properties of the copolymers that arise from these different connectivities. The two polymers exhibit 5% weight loss above 410 °C and high glass transition temperatures (T_g: 113 °C for PFO‐TPy25T, 142 °C for PFO‐TPy26T). The UV–vis absorption maximum peaks of PFO‐TPy25T and PFO‐TPy26T in the solid state were found to be 449 and 398 nm respectively, with photoluminescence maximum peaks in the solid state of 573 and 490 nm respectively. Using cyclic voltammetry, we determined their energy band gaps: 3.08 eV for PFO‐TPy25T and 3.49 eV for PFO‐TPy25T. The cyclic voltammetry study of these polymers revealed that there are some differences. The electroluminescence (EL) properties of the copolymers were measured for the device configuration of ITO/PEDOT/polymers/Ca/Al. The device fabricated with the polymer containing 2,5‐pyridine exhibits pale orange emission, whereas the device fabricated with the polymer containing 2,6‐pyridine exhibits pale blue emission. The EL device fabricated with PFO‐TPy25T has a higher brightness (2010 cd/m²) and external quantum efficiency (0.1%) than the PFO‐TPy26T device (260 cd/m², 0.008%), because it has a smaller energy barrier to the injection of charges from PEDOT and Ca into the HOMO and LUMO levels. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4611–4620, 2006