The deaquation reactions of some metal salt hydrates at elevated pressures

The deaquation reactions of BaCl₂·2H₂O, BaBr₂·2H₂O and CoCl₂·6H₂0 were studied by the thermal analysis techniques of thermogravimetry, differential thermal analysis (DTA), and electrical conductivity in the pressure range from one to 170 atm. In general, the effect of pressure on the TG curves increased the T_i and T_f values and also the reaction interval, (T_t—T_i). The DTA curves exhibited splittings into multiple peaks as a result of the increased pressure. These splittings were interpreted as due to the evolution of a liquid water phase followed b     

Zur Kenntnis der Hydrate des Bariumchlorids. Röntgenographische,thermoanalytische, Raman- und IR-spektroskopische Untersuchungen

Hydrates of Barium Chloride. X-ray, Thermoanalytical, Raman, and I.R. Data In the system BaCl₂? H₂O the hydrates BaCl₂ · 2 H₂O, BaCl₂ · 1 H₂O, BaCl₂ · 1/2 H₂O, and BaCl₂ · uH₂O were obtained. X-ray powder data, i.r. and Raman spectra, as well as thermoanalytical measurements (TG, DTA) are reported. BaCl₂ · 1 H₂O and BaCl₂ · 1/2 H₂O, which are both isotype with the corresponding hydrates of SrCl₂, were prepared by dehydration of BaCl₂ · 2 H₂O or by back hydration of anhydrous BaCl₂ with the calculated amounts of water. BaCl₂ · uH₂O (u ≈? 1) is formed as the primary product by the reaction of anhydrous BaCl₂ with water vapour at room temperature. Preparation methods of salt hydrates by controlled back hydration of the anhydrous salts are reported.     

DSC study of the kinetics of the thermal dehydration of BaCl2 · 2H2O and BaCl2 · H2O

The kinetics of the thermal dehydration of various kinds of BaCl₂ · 2H₂O and of BaCl₂ · H₂O are investigated using a differential scanning calorimeter. The loss of H₂O proceeds in two steps: BaCl₂ · 2H₂O→BaCl₂ · H₂O→BaCl₂ and is therefore revealed by two endothermic peaks. In the experiments at varying temperature both steps follow a contracting-circle law, after an initial acceleratory stage according to a (n=2) power law. In the experiments at constant temperature, after an initial acceleratory stage according to a (n=2) power law, both steps (except BaCl₂ · 2H₂O single-crystals which follow a contracting-circle law) follow an Avrami-Erofeev law (withn=2) in the form used by Galwey and Jacobs. The activation energies for the various steps are compared and the different kinetic behaviour is discussed.     

Hydratstufen und Kristallstrukturen von Bariumchlorid

Hydrates and crystal Structure of Barium Chloride The dehydrating process of BaCl₂ · 2H₂O and the phase transformations of BaCl₂ were observed by using a modified high temperature X-ray camera. The following compounds appeared with increasing temperature: BaCl₂ · 2H₂O → BaCl₂ · 1H₂O → BaCl₂(cubT) [BaCl₂(hex)]→ α-BaCl₂(ortho) → β-BaCl₂(cubH). The phase BaCl₂(cubT) is supposed to be the metastable low temperature form of β-BaCl₂(cubH). Structural relationships were demonstrated by comparing the different phases of the BaCl₂? H₂O system.     

Simultaneous TG,DTG and DTG analyses in controlled inert gas flow for the determination of deaquation steps of polyhydrated sulfates

The thermal deaquation reactions of CuSO₄·5H₂O and NiSO₄·7H₂0 were studied by simultaneous TG, DTG and DTA. In the CuSO₄·5H₂O thermogram three distinct steps corresponding to 2 moles,2moles. 1 mole of water were observed. and in the NiSO₄·7H₂O the sequence 1 mole, 3 moles, 2 moles, I mole was determined. The deaquation steps were correlated with the structure of water of crystallization. An exothermic DTA peak was observed during the evolution of the first mole of water in NiSO₄·7H₂O.     

A high pressure differential thermal analysis apparatus

A high pressure differential thermal analysis apparatus is described which is capable of operation in the pressure range from 1-600 atm of nitrogen gas and at temperatures from 25 to 500°C. Use of the apparatus is illustrated by the deaquation reactions of CuCl₂·2H₂0 and CoSO₄·7H₂O at pressures from 1 to 69 atm.     

Convenient Routes for the Preparation of Barium Permanganate and other Permanganate Salts

Two convenient methods were developed to transform KMnO₄ into barium permanganate and other permanganate salts via BaMnO₄ or Mn₂O₇ intermediates. Pure BaMnO₄ was prepared by the reaction of KMnO₄ with KI in the presence of BaCl₂ and NaOH. Hydrothermal reaction of barium manganate with excess carbon dioxide for 1.5 h at 100 °C led to barium‐permanganate with almost quantitative yield. Mn₂O₇ was prepared by means of the reaction of KMnO₄ and sulfuric acid monohydrate in a two‐phase (CCl₄‐H₂SO₄.H₂O) system. In the presence of excess barium carbonate and catalytic amount of water barium permanganate could be obtained with a moderate yield. Similarly, other permanganate salts (Zn, Cd, Cu, Mg, Ca, Ni, Al, Fe, Ce, rare earth metals) were prepared by substituting the BaCO₃ for the appropriate metal oxides, hydroxides or carbonates.     

Synthesis and Thermal Study of the Barium Complexes with 8-hydroxyquinolinate Derivatives

In this present work, barium ion was reacted with different ligands which are 5,7-dibromo 5,7-dichloro, 7-iodo and 5-chloro-7-iodo-8-hydroxyquinoline, in acetone/ammonium hydroxide medium under constant stirring and the obtained compounds were as follows: (I) Ba[(C₉ H₄ ONBr₂ )₂ ]⋅1.5H₂ O; (II) Ba[(C₉ H₄ ONCl₂ )(OH)]⋅1H₂ O; (III) Ba[(C₉ H₅ ONI)₂ ]⋅1H₂ O and (IV) Ba[(C₉ H₄ ONICl)₂ ]⋅5H₂ O, respectively. The compounds were characterized by elemental analysis, infrared absorption spectrum (IR), inductively coupled plasma spectrometry (ICP), simultaneous thermogravimetry-differential thermal analysis (TG-DTA) and differential scanning calorimeter (DSC). The final residue of the thermal decomposition was characterized as orthorhombic BaBr₂from (I); the intermediate residue, as a mixture of orthorhombic BaCO₃ and BaCl₂ and cubic BaO and the final residue, as a mixture of cubic and tetragonal BaO and orthorhombic BaCl₂ (II); the intermediate residue, as orthorhombic BaCO₃ and as a final residue, a mixture of cubic and tetragonal BaO from (III); and the intermediate residue, as a mixture of orthorhombic BaCO₃ and BaCl₂ and as a final residue, a mixture of cubic and tetragonal BaO and orthorhombic BaCl₂ from (IV). This revised version was published online in July 2006 with corrections to the Cover Date.     

Conductivities of Several Ternary Electrolyte Solutions and Their Binary Subsystems at 293.15, 298.15, and 303.15 K

Conductivities were measured for the ternary systems NaNO₃–KNO₃–H₂O, NaCl–BaCl₂–H₂O, NaCl–LaCl₃–H₂O, and their binary subsystems NaNO₃–H₂O, KNO₃–H₂O, NaCl–H₂O, BaCl₂–H₂O, and LaCl₃–H₂O at (293.15, 298.15 and 303.15) K. The results were used to verify the generalized Young’s rule and the semi-ideal solution theory. Comparison of the results shows that the average relative differences between the predicted and measured conductivities are ≤4.2×10⁻³ for NaNO₃–KNO₃–H₂O, ≤4.6×10⁻³ for NaCl–BaCl₂–H₂O, and ≤8.9×10⁻³ for NaCl–LaCl₃–H₂O, indicating that the generalized Young’s rule and the semi-ideal solution theory can provide good predictions for the conductivity of mixed electrolyte solutions in terms of the data from their binary subsystems.     

2，4，6-三硝基间苯二酚钡一水化合物的热分解动力学(英)

0IntroductionBarium2,4,6鄄trinitroresorecinatemonohydrate,Ba(TNR)·H2O,hasgooddetonatingpropertiesandissensitivetoflame.Itcanbeusedasinitiatingagent,igniterpowderordelaypowder.Itspreparation[1],pro鄄perties[1],crystalstructure[1]andthermalbehavior[2]haveb…     

Kinetic study of wood pyrolysis in presence of metal halides

The purpose of this work was to study the kinetics of wood pyrolysis in the presence of inorganic salts, representatives of classes of alkali and alkaline earth metal halides (NaCl, KCl, KBr, CaCl₂, BaCl₂·2H₂O) and Lewis acids (AlCl₃·6H₂O, FeCl₃·6H₂O, CuCl₂, CuBr₂, ZnCl₂·1.5H₂O, NiCl₂·6H₂O, SnCl₂·2H₂O) using TG-DSC. The activity of these catalysts was estimated by the temperature of the beginning of pyrolysis, charcoal yield and kinetic parameters, such as energy of activation and reaction order. Using the Lewis acids as catalysts for pyrolysis leads to a decrease in the temperature of the process beginning and the activation energy. In the presence of other catalysts activation energy does not significantly change. The increase of a seeming reaction order in the presence of Lewis acids possibly is a consequence of complication of the thermodestruction mechanism, with the appearance of new parallel competing stages.      

固相配位化学反应研究──LXX．二水醋酸镉与邻氨基苯甲酸的分步固相反应

二水醋酸镉与邻氨基苯甲酸(HOAB)在室温下发生固-固相化学反应生成Cd(OAB)₂,用等温DSC、等温电导法跟踪研究反应过程发现,上述固相反应分两步进行.     

Differential enthalpies of solution of LiCl·H2O,NaCl, KCl,MgCl2·6H2O,CaCl2·6H2O,and BaCl2·2H2O in water at 298.15 K,near the saturation concentration

The direct measurements of differential enthalpies of solution Δ_sol H ₂, of LiCl·H₂O, NaCl, KCl, MgCl₂·6H₂O, CaCl₂·6H₂O and BaCl₂·2H₂O, as the function of molality,m, in the region of concentrated solutions were performed. On this basis the enthalpies of crystallization, Δ_cryst H _m, were calculated and compared to the appropriate literature data.     

Research on thermal decomposition of trinitrophloroglucinol salts by DSC, TG and DVST

The thermal decomposition of the four nitrogen-rich salts of ammonia (NH₄), aminoguanidine (AG), carbohydrazide (CHZ) and 5-aminotetrazo (ATZ) based on trinitrophloroglucinol (H₃TNPG) was investigated using the differential scanning calorimetry (DSC), thermogravity (TG), and dynamic vacuum stability test (DVST). DSC and TG methods research the complete decomposition, while DVST method researches the very early reaction stage. The peak temperatures of DSC curves are consistent with the temperatures of maximum mass loss rates of TG curves. The apparent activation energies of these H₃TNPG-based salts obtained by DSC and DVST have the same regularity, i.e., (ATZ)(H₂TNPG)·2H₂O < (CHZ)(HTNPG)·0.5H₂O < NH₄(H₂TNPG) < (AG)(H₂TNPG). The thermal stability order is (ATZ)(H₂TNPG)·2H₂O < (CHZ)(HTNPG)·0.5H₂O < (AG)(H₂TNPG) < NH₄(H₂TNPG), which was evaluated by DVST according to the evolved gas amount of thermal decomposition. DVST can monitor the real-time temperature and pressure changes caused by thermal decomposition, dehydration, phase transition and secondary reaction, and also evaluate the thermal stability and kinetics.      

Kinetics of the thermal dehydration of potassium titanium oxalate, K2TiO(C2O4)2·2H2O

The thermal dehydration reaction of potassium titanium oxalate, K₂TiO(C₂O₄)₂·2H₂O, has been studied by means of thermogravimetry (TG), differential thermal analysis (DTA), and differential scanning calorimetry (DSC) in nitrogen atmosphere at different heating rates. K₂TiO(C₂O₄)₂·2H₂O dehydrates in a single step through a practically irreversible process. The activation energy involved and its dependence on the conversion degree were estimated by evaluating the thermogravimetric data according to model-free methods, and values of activation energy were determined for the dehydration reaction. Activation energy values were also evaluated from DSC data using isoconversional methods. The complexity of the dehydration of K₂TiO(C₂O₄)₂·2H₂O is illustrated by the dependence of E on the extent of conversion, ?? (0.05??????????0.95).     

A study of the thermodynamic properties and dehydration reaction kinetics of some salt-hydrates

Correlations were determined between heat capacity and temperature and phase change enthalpy of Ba(OH)₂·8H₂O. The phase diagram and DSC curve of the binary system Na₂CO₃·10H₂O?Na₂HPO₄·12H₂O were determined The kinetics of the dehydrating reaction of Ba(OH)₂·8H₂O, Na₂CO₃·10H₂O and Na₂HPO₄·12H₂O were measured and theoretically analyzed by TG.     

A New Simple Route To N-Substituted 2-Aminoethylphosphonic Acids

2-Aminoethylphosphonic acid (AEPA) and its N-substituted compounds were prepared by one step reaction using 2-chloroethylphosphonic acid with ammonia and amines (H₂NMe, HNMeMe, HNEtEt, H₂NPr-n, H₂NCH₂ph, H₂NCH₂CH₂NH₂ and H₂N(C=NH)NH₂ in a dilute alkaline solution below 20 °C with simple work-up and easy purification. The reaction was accelerated by catalytic amount of potassium iodide. The yield for the reaction products were 35.6 to 48.6% for the KI absence and 78.2 to 88.0% for the KI presence.     

Kinetics of the thermal dehydration of trans-fluoroaquobis(ethylenediamine)chromium(III) tetracyanometallate(II) [metal(II) = Ni(II), Pd(II) and Pt(II)]

The solid phase thermal deaquation—anation of trans-[CrF(H₂O)(en)₂][M(CN)₄] (M = Ni, Pd, Pt; en = ethylenediamine) has been investigated by means of non-isothermal DSC and isothermal and non-isothermal TG measurements. The physical model for these reactions (nucleation, growth, diffusion or intermediates) has been found by comparison of the isothermal and non-isothermal TG data for all the principal g(α) expressions (0.2?α?0.8) and by the shape of the isothermal curves. The values found for activation energy are low (～ 130 kJ mol^?1 for the Ni compound, ～ 140 kJ mol^?1 for the Pd compound, and ～ 100 kJ mol^?1 for the Pt compound). These data permit the assignment of the deaquation—anation mechanism of the S_N1 type involving a square-base pyramid activated complex and elimination of water as Frenkel defects.     

Thermal properties of sodium metasilicate hydrates

The heats of fusion and heat capacities at 298.2 K of Na₂SiO₃·5H₂O, Na₂SiO₃·6H₂O and Na₂SiO₃·9H₂O have been measured by DSC. The enthalpies and entropies of fusion increase with the water content of the hydrate and the entropy of fusion per mole of water is almost constant. The application of DSC/DTA to the analysis of metasilicate hydrate mixtures is discussed.     

Transition metal complexes with pyrazole based ligands

The deaquation of two isostructural compounds of general formula [M(HL)₂(H₂O)₂](NO₃)₂ (M=Co, Ni, HL=3,5-dimethyl-1H-pyrazole-1-carboxamidine) is discussed in the view of their crystal and molecular structure. The compounds contain the same number and type of hydrogen bonds of the adjacent nitrate ions, only in the opposite orientation. On the basis of their deaquation pattern such a small difference may be detected, i.e., methods of thermal analysis are sensitive enough to show very small structural differences.