Chemistry of 2‐oxazolines: A crossing of cationic ring‐opening polymerization and enzymatic ring‐opening polyaddition

Chemistry of 2‐oxazolines is involved in the polymer synthesis fields of cationic ring‐opening polymerization (CROP) and enzymatic ring‐opening polyaddition (EROPA), although both polymerizations look like a quite different class of reaction. The key for the polymerization to proceed is combination of the catalyst (initiator) and the design of monomers. This article describes recent developments in polymer synthesis via these two kinds of polymerizations to afford various functional polymers having completely different structures, poly(N‐acylethylenimine)s via CROP and 2‐amino‐2‐deoxy sugar unit‐containing oligo and polysaccharides via EROPA, respectively. From the viewpoint of reaction mode, an acid‐catalyzed ring‐opening polyaddition (ROPA) is considered to be a crossing where CROP and EROPA meet. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1251–1270, 2010     

Synthesis of polyethers with unsymmetrical structures by the polyaddition of 3‐ethyl‐3‐(glycidyloxymethyl)oxetane with diacyl chlorides

Polyethers with unsymmetrical structures in the main chains and pendant chloromethyl groups were synthesized by the polyaddition of 3‐ethyl‐3‐(glycidyloxymethyl)oxetane (EGMO) with certain diacyl chlorides with quaternary onium salts or pyridine as catalysts. The unsymmetrical polyaddition of EGMO containing two different cyclic ether moieties such as oxirane and oxetane groups with terephthaloyl chloride proceeded smoothly in toluene at 90 °C for 6 h to give polymer 1 with a number‐average molecular weight (M_n) of 51,700 in a 93% yield when tetrabutylammonium bromide (TBAB) was used as a catalyst. The polyaddition also proceeded smoothly under the same conditions when other quaternary onium salts, such as tetrabutylammonium chloride, tetrabutylammonium iodide, tetrabutylphosphonium chloride, and tetrabutylphosphonium bromide, and pyridine were used as catalysts. However, without a catalyst no reaction occurred under the same reaction conditions. Polyadditions of EGMO with isophthaloyl chloride and adipoyl chloride gave polymer 2 (M_n = 28,700) and polymer 3 (M_n = 25,400) in 99 and 65% yields, respectively, under the same conditions. The chemical modification of the resulting polymer, polymer 1 , which contained reactive pendant chloromethyl groups, was also attempted with potassium 3‐phenyl‐2,5‐norbornadiene‐2‐carboxylate with TBAB as a phase‐transfer catalyst, and a polymer with 65 mol % pendant norbornadiene moieties was obtained. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 368–375, 2001     

Novel synthesis of reactive polycarbonates with pendant chloromethyl groups by the polyaddition of bis(oxetane)s with 2,2′‐bis[(4‐chloroformyl)oxyphenyl]propane

The polyaddition of 1,4‐bis[(3‐ethyl‐3‐oxetanyl)methoxymethyl]benzene with 2,2′‐bis[(4‐chloroformyl)oxyphenyl]propane was examined with quaternary onium salts as catalysts. When the polyaddition was carried out with tetrabutylphosphonium bromide in chlorobenzene at 120 °C for 24 h, the corresponding poly(alkyl aryl carbonate) with a high molecular weight (number‐average molecular weight = 16,700) was obtained in an almost quantitative yield. It was found from the ¹H NMR and ¹³C NMR spectra of the obtained polymer that the addition reaction proceeded without any side reactions, providing the polycarbonate with pendant chloromethyl groups in the side chain. The polyaddition of bis{[3‐(3‐ethyloxetanyl)]methyl}terephthalate also proceeded smoothly and gave the corresponding polycarbonate with high molecular weight in a good yield. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2304–2311, 2003     

Synthesis and crosslinking reaction of poly(hydroxyurethane) bearing a secondary amine structure in the main chain

This article describes the polyaddition of bifunctional five‐membered cyclic carbonates and diethylenetriamine. The polyaddition proceeded via the selective addition of the primary amino group to the cyclic carbonates to give poly(hydroxyurethane)s bearing a secondary amine structure in the main chain. The resulting poly (hydroxyurethane) having a secondary amine structure was crosslinked by a reaction with a bifunctional dithiocarbonate to give a networked poly(hydroxyurethane–mercaptothiourethane). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5899–5905, 2005     

Catalytic reactions of oxetanes with protonic reagents and aprotic reagents leading to novel polymers

This paper reports new addition reactions of oxetanes with certain protonic reagents such as carboxylic acid, phenol, and thiol, and with certain aprotic reagents such as acyl chloride, thioester, phosphonyl dichloride, silyl chloride, and chloroformate using quaternary onium salts as catalysts. The kinetic study of the addition reactions of oxetanes was also investigated. These new addition reactions were applicable to the synthesis of new polymers. These polyaddition systems could also construct both polymer main chains and reactive side chains. The alternating copolymerization of oxetanes with carboxylic anhydride was performed. Furthermore, it was found that anionic ring‐opening polymerization of oxetanes containing hydroxy groups proceeded to afford the hyperbranched polymer (HBP) with an oxetanyl group and many hydroxy groups at the ends of the polymer chains. Alkali developable photofunctional HBPs were synthesized by the polyaddition of bis(oxetane)s or tris(oxetane)s, and their patterning properties were examined, too. The photo‐induced cationic polymerization of the polymers with pendant oxetanyl groups and the thermal curing reactions of polyfunctional oxetanes (oxetane resins) were also examined to give the crosslinking materials quantitatively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 709–726, 2007     

Amine containing cationic methacrylate copolymers as efficient gene delivery vehicles to retinal epithelial cells

Non‐viral gene delivery vectors have emerged as potential alternatives in the field of gene therapy by replacing the biological viral vectors. DNA–cationic polymer complexes are one of the most promising systems to target many inborn or acquired diseases without the utilization of conventional drugs. Despite the excellent binding efficiency of cationic polymers, the gene transfection seems limited to date. In this work, a series of ammonium‐based block‐copolymers with different alkyl side chains (ethyl, butyl, and hexyl) and functionality (alcohol, amine, and alkyl) have been prepared to evaluate their capacity to deliver genetic material. First, different ionic liquid monomers with different pendent functional groups were prepared and characterized. Then, polyplexes elaborated with different polymers at several polymer DNA ratios (w/w) were characterized in terms of size, zeta potential, and DNA binding, release, and protection capacity. Finally, the transfection efficiency and cell viability was evaluated in ARPE19 cells. We found that only the systems containing the amine pendent group were able to transfect ARPE19 cell and, that this amine containing polymer was less cytotoxic even at high polymer/DNA ratios (30:1). In conclusion, our studies suggested that the proper selection of the pendent group substantially impacts overall transfection efficiency of cationic polymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 280–287     

Synthesis of polyphosphonates containing pendant chloromethyl groups by the polyaddition of bis(oxetane)s with phosphonic dichlorides

The polyaddition of 4,4′‐bis[(3‐ethyl‐3‐oxetanyl)methoxy]biphenyl (4,4′‐BEOBP) and phenylphosphonic dichloride (PPDC) with quaternary onium salts as catalysts proceeded under mild reaction conditions to afford a polymer containing phosphorous atoms in its main chain. A polyphosphonate with a high number‐average molecular weight (10,300) was obtained by the reaction of 4,4′‐BEOBP and PPDC in the presence of tetraphenylphosphonium chloride (TPPC) in o‐dichlorobenzene at 130 °C for 24 h. The structure of the resulting polymer was confirmed with IR, ¹H NMR, and ³¹P NMR spectroscopy. Furthermore, it was proved that the polyaddition of certain bis(oxetane)s with phosphonic dichlorides proceeded smoothly to give corresponding polyphosphonates with TPPC as the catalyst. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3835–3846, 2002     

Synthesis of poly(silyl ether)s containing pendant chloromethyl groups by the polyaddition of bis(oxetane)s with dichlorosilanes

The polyaddition of bis(3‐ethyl‐3‐oxetanylmethyl) terephthalate (BEOT) with dichlorodiphenylsilane (CPS) using tetrabutylammonium bromide (TBAB) as a catalyst proceeded under mild reaction conditions to afford a polymer containing silicon atoms in the polymer main chain. A poly(silyl ether) (P‐1) with a high molecular weight (M_n = 53,200) was obtained by the reaction of BEOT with CPS in the presence of 5 mol % of TBAB in toluene at 0 °C for 1 h and then at 50 °C for 24 h. The structure of the resulting polymer was confirmed by IR and ¹H NMR spectra. Furthermore, it was proved that the polyaddition of certain bis(oxetane)s with dichlorosilanes proceeds smoothly to give corresponding poly(silyl ether)s with TBAB as the catalyst. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2254–2259, 2000     

Synthesis and property of polyoxazolidone having fluorene moiety by polyaddition of diisocyanate and diepoxide

Polyoxazolidones having fluorenyl group were synthesized by polyaddition of 9,9‐diglycidyl fluorene with various diisocyanates. The polymer from 9,9‐diglycidyl fluorene and methylenediphenyl 4,4′‐diisocyanate was afforded in high yield although polydispersity of the polymer was found relatively broad. The IR spectrum of the obtained polymer showed two absorption in carbonyl region. One of them was assigned to the expected oxazolidone, while the other at 1710 cm^?1 appeared due to a carbonyl group of the isocyanurate moieties produced by cyclotrimerization of isocyanate. It is assumed that the cyclotrimerization would cause the broad polydispersity caused by the branched structure formed by isocyanurate. The polymers obtained with three kinds of diisocyanates (methylenediphenyl 4,4'‐diisocyanate, 1,6‐hexamethylene diisocyanate, 1,4‐phenylene diisocyanate) showed high thermal stability, as their T_d10 was depended on the structure of diisocyanate. All polymers had high transparency in a visible region. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1755–1760     

Polyaddition of bifunctional 1,3‐benzoxazine and 2‐methylresorcinol

A polyaddition system consisted of a bifunctional N‐n‐propyl benzoxazine and 2‐methylresorcinol ( MR ) that proceeds at ambient temperature has been developed. In this system, the aromatic ring of MR acted as a bifunctional monomer, reacting with a two equivalent amount of benzoxazine moieties via their ring‐opening reaction. The polyaddition gave the corresponding linear polymer bearing phenolic moieties bridged by Mannich‐type linkage in the main chain. The linear polymer had a high glass transition temperature, which was comparable to that of the linear polybenzoxazine synthesized by the ring‐opening polymerization of a monofunctional N‐n‐propyl benzoxazine. The employment of a bifunctional N‐allyl benzoxazine in the polyaddition system resulted in the formation of the corresponding polymer with allyl pendants, which exhibited improved heat resistance due to its thermally induced crosslinking reaction. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3867–3872     

Synthesis and characterization of water‐soluble hyperbranched poly(ester amine)s from diacrylates and diamines

Various water‐soluble hyperbranched poly(ester amine)s were synthesized by the direct polyaddition of diamines to diacrylates in the absence of a catalyst. Each diamine contained a secondary amino group and a primary amino group such as 1‐(2‐aminoethyl)piperazine, N‐methyl‐1,3‐propanediamine, or N‐ethylethylenediamine. When the ratio of diacrylate to diamine was 1/1, no gelation was observed throughout the polymerization. When the ratio of diacrylate to diamine was 3/2, no crosslinking occurred in the diluted solution, whereas an insoluble network formed in the concentrated solution. Fourier transform infrared and mass spectrometry were used to investigate the reaction procedure. The secondary amino group of diamine reacted faster with the vinyl group of diacrylate; this resulted in the formation of the intermediate with an acrylate group and two active hydrogen atoms attached to a nitrogen atom. Further self‐polyaddition of the intermediate, a kind of AB₂‐type monomer, gave the hyperbranched poly(ester amine). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2340–2349, 2002     

Synthesis of poly(cyanurate)s by a novel polyaddition of bis(epoxide)s with triazine dichloride

Poly(cyanurate)s (P‐1–P‐4) containing triazine groups in the main chain and pendant chloromethyl groups in the side chain were synthesized by the polyaddition of bis(epoxide)s with 2,4‐dichloro‐6‐(diphenylamino)‐s‐triazine (DPAT) using quaternary onium salts as catalysts. The polyaddition of diglycidyl ether of bisphenol‐A (DGEBA) with DPAT proceeded smoothly in chlorobenzene at 100 °C for 12 h to give P‐1 with M_n = 19,000 in a 92% yield, when tetrabutylammonium chloride (TBAC) was used as a catalyst. However, no reaction occurred without a catalyst or with triethylamine alone under the same reaction conditions. Polyadditions of other bis(epoxide)s with DPTA also proceeded smoothly using 5 mol % of TBAC as a catalyst in chlorobenzene to produce corresponding polymers (P‐2≈P‐4) in high yields under similar reaction conditions. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4006–4012, 2000     

Synthesis of head‐to‐tail polyurethanes from nonsymmetric diisocyanate and ethylene glycol with organotin catalysts

An ordered head‐to‐tail (HT) polyurethane was successfully prepared by the polyaddition reaction of p‐isocyanatobenzyl isocyanate with ethylene glycol with dibutyltin dilaurate as a catalyst. Furthermore, the HT regularity of polyurethane was improved to 83% with 1,1,3,3‐tetraphenyl‐1,3‐dichlorodistannoxane. The polymerization was conducted in N,N‐dimethylformamide at 30 °C with both monomers mixed at once. The microstructure of the polymer was investigated by ¹H and ¹³C NMR spectroscopy, and the polymer obtained by the polyaddition reaction had the expected HT linkages. The constitutional regularity of the polymers influenced the thermal properties and crystallinity. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 416–429, 2001     

Synthesis and polymerization reactions of cyclic imino ethers. VI. Polymers with biphenyl structure

A monomer of the AB‐type and a bifunctional comonomer of the AA‐type containing two 2‐oxazoline rings and a biphenyl structural unit were prepared from the corresponding carboxylic acids via their esterification and subsequent amidation with an aminoalcohol. The cyclization of an amide to 2‐oxazoline structure was achieved by treatment with thionyl chloride followed by liberation of the free base with sodium hydrocarbonate in an aqueous solution. The prepared monomers were used for the polyaddition polymerization of the AB‐type monomer having a 2‐oxazoline and phenol group bound on adjacent rings of the biphenyl structure in solution. The monomer of the AA‐type was used for AA+BB‐type polyaddition reactions with aliphatic dicarboxylic acids. Both types of polymerizations have been performed in melt and in solution. The structures of the polymers were determined, and the thermal properties of the polymers were evaluated. Liquid‐crystalline (LC) structures of the prepared polymers were observed by DSC measurements and optical microscopy. The polyaddition reactions of the monomers containing a 2‐oxazoline ring and a biphenyl unit represent a new efficient way for the preparation of a biphenyl unit containing poly(ether amide)s and poly(ester amide)s. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and crosslinking reaction of poly(thiourethane)s having a siloxane moiety in the side chain

Poly(thiourethane)s having a siloxane moiety in the side chain were synthesized with a 5‐membered cyclic dithiocarbonate (DTC) having a siloxane group as a building block. The synthetic pathway consisted of (1) an addition reaction of the DTC with diamines and (2) polyaddition reactions of the resulting dithiols with diisocyanates. The siloxane moiety in the polymer side chain underwent a self‐condensation reaction upon exposure to moisture, and this led to a successful crosslinking reaction of the poly(thiourethane). The crosslinking on a silicate surface was accompanied by condensation between the siloxane side chain of the polymer and the silanol group on the surface, giving the corresponding surface that was permanently coated with the crosslinked polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6492–6502, 2005     

Synthesis of novel core‐crosslinked graft copolymers from crosslinked poly(mercapto‐thiourethane)

Crosslinked poly(mercapto‐thiourethane) was employed as a precursor for graft copolymer synthesis. The crosslinked stem polymer ( 1 ) was easily prepared by polyaddition of a bifunctional dithiocarbonate and piperazine under air atmosphere via oxidative coupling of mercapto group. Polymerization of styrene and methyl methacrylate in the presence of 1 yielded the corresponding crosslinked graft copolymers with high grafting weight percentages (>1800%). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5097–5102, 2005     

Novel copolymer networks via the combination of polyaddition and anionic polymerization

A two‐step synthetic route to novel copolymer networks, consisting of polymethacrylate and polyacetal components, was developed by combining the polyaddition and anionic polymerization techniques. The functional polymethacrylates containing hydroxyl or vinyloxyl side groups were used as crosslinkers. They were anionically synthesized as follows: the copolymer of 2‐hydroxyethyl methacrylate (HEMA) and methyl methacrylate (MMA) was prepared by the anionic copolymerization of 2‐(trimethylsiloxy)ethyl methacrylate and MMA, followed by hydrolysis. The copolymer poly(HEMA‐co‐MMA) thus obtained possessed a hydroxyl group in each of its HEMA units. Another kind of vinyloxyl‐containing (co)polymer was prepared by the anionic homopolymerization of 2‐(vinyloxy)ethyl methacrylate (VEMA) or its copolymerization with MMA. The resulting (co)polymer possessed reactive vinyloxyl side groups. The copolymer networks were obtained by reacting each of the above‐mentioned (co)polymers with a polyacetal prepared via the polyaddition between a divinyl ether and a diol. Three divinyl ethers (ethylene glycol divinyl ether, 1,4‐butanediol divinyl ether, and 1,6‐hexanediol divinyl ether) and three diols (ethylene glycol, 1,4‐butanediol, and 1,6‐hexanediol) were employed as monomers in the polyaddition step, and their combinations generated nine kinds of polyacetals. When a polyaddition reaction was terminated with a divinyl ether monomer, a polyacetal with two vinyloxyl end groups was obtained, which could further react with the hydroxyl groups of poly(HEMA‐co‐MMA) to generate a copolymer network. On the other hand, when a diol was used as terminator in the polyaddition, the resulting polyacetal possessed two hydroxyl end groups, which could react with the vinyloxyl groups of poly(VEMA) or poly(VEMA‐co‐MMA), to generate a copolymer network. All the copolymer networks exhibited degradation in the presence of acids. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 117–126, 2001     

Synthesis and reaction of β‐hydroxyaspartic acid‐based polymethacrylate

O‐Methacryloyl‐N‐(tert‐butoxycarbonyl)‐β‐hydroxyaspartic acid dimethyl ester was synthesized by methyl esterification of β‐hydroxyaspartic acid, followed by protection of the amino group with the tert‐butoxycarbonyl group and then the reaction of the hydroxyl group with methacryloyl chloride. The monomer efficiently underwent radical polymerization to afford the corresponding polymer with a number‐average molecular weight of 42,000 in good yields. The alkaline hydrolysis of the polymer occurred not only at the methyl ester but also at the ester moiety between the main and side chains of the polymer. The methyl ester‐free polymer gradually released β‐hydroxyaspartic acid moiety in a phosphate buffer solution with pH = 7.3 and 7.8. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2782–2788, 2002     

Novel synthesis of polyethers by the polyaddition of bis(epoxide)s with bis(phosphinate)s

The polyaddition of bisphenol A diglycidyl ether with bis[4‐(P,P‐diphenylphosphinyloxy)phenyl] sulfone catalyzed by quaternary onium salt, such as tetrabutylammonium chloride afforded a new phosphorus‐containing polyether with good solubility in common organic solvents. Having studied various factors affecting the reaction, such as temperature, catalyst concentration, reaction time, etc., an appropriate polyaddition condition was suggested as using 5 mol % of suitable quaternary ammonium or phosphonium salt in polar solvent at 150°C within 25 h in an ampule for producing high molecular weight polymer. A number of polyethers bearing pendent phosphinate ester groups from the polyaddition of certain bis(epoxide)s and bis(phosphinate)s were synthesized under the above condition and characterized by GPC, IR, and NMR. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1009–1016, 1999     

Pd(0)‐catalyzed polyaddition of bifunctional vinyloxiranes with 1,3‐dicarbonyl compounds: The synthesis of polymers containing hydroxy and carbonyl groups

The palladium(0)‐catalyzed polyaddition of bifunctional vinyloxiranes [1,4‐bis(2‐vinylepoxyethyl)benzene ( 1a ) and 1,4‐bis(1‐methyl‐2‐vinylepoxyethyl)benzene ( 1b )] with 1,3‐dicarbonyl compounds [methyl acetoacetate ( 4 ), dimethyl malonate ( 6 ), and Meldrum's acid ( 8 )] was investigated under various conditions. The polyaddition of 1 with 4 was carried out in tetrahydrofuran with phosphine ligands such as PPh₃ and 1,2‐bis(diphenylphosphino)ethane (dppe). Polymers having hydroxy, ketone, and ester groups in the side groups ( 5 ) were obtained in good yields despite the kinds of ligands employed. The number‐average molecular weight value of 5b was higher than that of 5a . The polyaddition of 1b and 6 was affected by the kinds of ligands employed. The corresponding polymer 7b was not obtained when PPh₃ and 1,2‐bis(diphenylphosphino)ferrocene were used. The polyaddition was carried out with dppe as the ligand and gave polymer 7b in a good yield. The molecular weight of the polymer obtained from 1b and 8 was much higher than those of polymers 5b and 7b . The polyaddition with Pd₂(dba)₃ · CHCl₃/dppe as a catalyst (where dba is dibenzylideneacetone) produced polymer 9b in a 92% yield (number‐average molecular weight = 45,600). The stereochemistries of all the obtained polymers were confirmed as an E configuration by the coupling constant of the vinyl proton. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2487–2494, 2002