Relative reactivities of bicyclo[3.2.1]octa-2,3-diene and 1,2-cycloheptadiene with conjugated dienes and styrene

Bicyclo[3.2.1]octa-2,3-diene (2) and 1,2-cycloheptadiene (3), generated by treatment of the corresponding dichlorides 4 and 5 with magnesium, were found to undergo cycloaddition reactions with 2,3-dimethylbutadiene, styrene, and 1,3-cyclopentadiene. 2, but not 3, was also found to undergo a (2 + 2) cycloaddition reaction with cis-pentadiene. The relative reactivities of 2 and 3 with cis-pentadiene, 2,3-dimethylbutadiene, styrene, and 1,3-cyclopentadiene at 60° in THF were found to be: 0·18, —; 1·0, 1·0; 0·60, 7·5; and 4·0, 150.     

Diacetoxylation of conjugated dienes with thallium(III) acetate in acetic acid

The reaction of conjugated dienes such as 1,3-butadiene, isoprene, 2,3-dimethyl-1,3-butadiene, 2,5-dimethyl-2,4-hexadiene, 1,3-cyclopentadiene, and 1,3-cyclohexadiene, with thallium(III)acetate in acetic acid at 10–65° for 0.5–15 hr affords an isomeric mixture of the corresponding diacetoxyalkenes (1,2- and 1,4-addition products) in 10–92% yields. The 1,2-addition products are predominantly formed in all cases examined except the case of 1,3-cyclopentadiene. The reaction is assumed to proceed through acetoxythallation and dethallation steps, the latter step being accompanied and/or followed by an attack of acetoxyl group. An initial attack of thallium moiety is proposed to occur mainly at C-1 and C-2 carbons in the cases of linear terminal dienes and cyclic dienes, respectively.     

Hydrocarbon polymers containing six-membered rings in the main chain. Microstructure and properties of poly(1,3-cyclohexadiene)

The relationship between the microstructure and the properties of poly(1,3-cyclohexadiene)s, obtained by living anionic polymerization with an alkyllithium/amine system, and their hydrogenated derivatives are reported. The 1,2-bond/1,4-bond molar ratio of poly(1,3-cyclohexadiene) was determined by measuring 2D-NMR with the H H COSY method. The glass transition temperature of poly(1,3-cyclohexadiene) was found to rise with an increase in the ratio of 1,2-bonds to 1,4-bonds or with an increase of the number average molecular weight. The 1,2-bond of the polymer chain gives a high flexural strength and heat distortion temperature. Hydrogenated poly(1,3-cyclohexadiene) has the highest T_g (231°C) among all hydrocarbon polymers ever reported. 1,3-Cyclohexadiene–butadiene–1,3-cyclohexadiene triblock copolymer and 1,3-cyclohexadiene–styrene–1,3-cyclohexadiene triblock copolymer have high heat resistance and high mechanical strength. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1657–1668, 1998     

Electrophilic Reactivities of 1,2‐Diaza‐1,3‐dienes

The kinetics of the reactions of 1,2‐diaza‐1,3‐dienes 1 with acceptor‐substituted carbanions 2 have been studied at 20 °C. The reactions follow a second‐order rate law, and can be described by the linear free energy relationship log k(20 °C)=s(N+E) [Eq. (1)]. With Equation (1) and the known nucleophile‐specific parameters N and s for the carbanions, the electrophilicity parameters E of the 1,2‐diaza‐1,3‐dienes 1 were determined. With E parameters in the range of ?13.3 to ?15.4, the electrophilic reactivities of 1 a–d are comparable to those of benzylidenemalononitriles, 2‐benzylideneindan‐1,3‐diones, and benzylidenebarbituric acids. The experimental second‐order rate constants for the reactions of 1 a – d with amines 3 and triarylphosphines 4 agreed with those calculated from E, N, and s, indicating the applicability of the linear free energy relationship [Eq. (1)] for predicting potential nucleophilic reaction partners of 1,2‐diaza‐1,3‐dienes 1 . Enamines 5 react up to 10² to 10³ times faster with compounds 1 than predicted by Equation (1), indicating a change of mechanism, which becomes obvious in the reactions of 1 with enol ethers.     

The cyclodimerisation of 3-methyl-2-butenenitrile

3-Methyl-2-butenenitrile (1) cyclodimerised on treatment with lithium diisopropylamide in dimethoxyethane at temperatures between ?78°C and 0°C to 3-amino-4-cyano-1,5,5-trimethyl-1,3-cyclohexadiene (2) the structure of which was established by acid hydrolysis to the known 4-cyano-1,5,5-trimethyl-1-cyclohexene-3-one (3).     

Cationic polymerizations of substituted 2-methylene-1,3-dioxocyclic acetals, 2-methylene-1,3-dithiolane and copolymerization of 2-methylene-1,3-dithiolane with 4-(t-butyl)-2-methylene-1,3-dioxolane1

Carbon black-supported sulfuric acid or BF₃·Et₂O-initiated polymerizations of 2-methylene-4,4,5,5-tetramethyl-1,3-dioxolane (1), 2-methylene-4-phenyl-1,3-dioxolane (2), and 2-methylene-4-isopropyl-5,5-dimethyl-1,3-dioxane (3) were performed. 1,2-Vinyl addition homopolymers of 1–3 were produced using carbon black-supported H₂SO₄ initiation at temperatures from 0°C to 60°C whereas both ring-opened and 1,2-vinyl structural units were present in the polymers using BF₃·Et₂O as an initiator. Cationic polymerizations of 2-methylene-1,3-dithiolane (4) and copolymerization of 4 with 2-methylene-4-(t-butyl)-1,3-dioxolane (5) were initiated with either carbon black-sulfuric acid or BF₃·Et₂O. Insoluble 1,2-vinyl addition homopolymers of 4 were obtained upon initiation with the supported acid or BF₃·Et₂O. A soluble copolymer of 2-methylene-1,3-dithiolane (4) and 4-(t-butyl)-2-methylene-1,3-dioxolane (5) was obtained upon BF₃·Et₂O initiation. This copolymer is composed of three structural units: a ring-opened dithioester unit, a 1,2-vinyl-polymerized 1,3-dithiolane unit, and a 1,2-vinyl polymerized 4-(t-butyl)-1,3-dioxolane unit. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2823–2840, 1999     

Monomer-isomerization polymerization. XIII. Monomer-isomerization polymerization of 1,4-cyclohexadiene with Ziegler-Natta catalyst

1,4-Cyclohexadiene underwent monomer-isomerization polymerization to yield poly(1,3-cyclohexadiene) with a Ziegler-Natta catalyst comprising TiCl₄–Al(C₂H₅)₃ catalyst with Al/Ti molar ratios of 0.5–3.0 at 60°C for 96 hr. Good yields of polymer were obtained (49.5% yield at Al/Ti = 3.0; [η] = 0.04 dl/g). The infrared and NMR spectra of the polymer were identical to those of poly-(1,3-cyclohexadiene), confirming that 1,4-cyclohexadiene first isomerizes to 1,3-cyclohexadiene and then homopolymerizes to give poly-1,3-cyclohexadiene. 1,3-Cyclohexadiene polymerized without isomerization easily in the presence of TiCl₃–Al(C₂H₅)₃ catalyst at Al/Ti molar ratios of 0.5–3.0 at 60°C for 3 hr (76.3% yield at Al/Ti = 3.0; [η] = 0.06 dl/g).     

Metallderivate von Molekülverbindungen. III. Molekül- und Kristallstruktur des Lithium-bis (trimethylsilyl)-phosphids · DME und des Lithium-dihydrogenphosphids · DME

Metal Derivatives of Molecular Compounds. III. Molecular and Crystal Structure of Lithium bis(trimethylsilyl)phosphide · DME and of Lithium dihydrogenphosphide · DME Lithium bis(trimethylsilyl)phosphide · DME 1 prepared from tris(trimethylsilyl)-phosphine and lithium methanide [2, 4] in 1,2-dimethoxyethane

1 1,2-Dimethoxyethan (DME); Tetrahydrofuran (THF); Bis[2-(dimethylamino)ethyl]methyl-amin (PMDETA).

, crystallizes in the orthorhombic space group Pnnn {a = 881.1(9); b = 1308.5(9); c = 1563.4(9) pm at ?120 ± 3°C; Z = 4 formula units}, lithium dihydrogenphosphide · DME 2 [10] prepared from phosphine and lithium- n -butanide in the same solvent, in P2 ₁ 2 ₁ 2 ₁ {a = 671.8(1); b = 878.6(1); c = 1332.2(2) pm at ?120 ± 3°C; Z = 4 formula units}. X-ray structure determinations (R _w = 0.036/0.045) show the bis(trimethylsilyl) derivative 1 to be dimeric with a planar P? Li? P? Li ring (P? Li 256 pm; Li? P? Li 76°; P? Li? P 104°), and the dihydrogenphosphide 2 to be polymeric with a linear Li? P? Li fragment (P? Li 254 to 260 pm; Li? P? Li 177°; P? Li? P 118°). The shortened P? Si distance (221 pm) of compound 1 and the structure of the PH ₂ group in 2 are discussed in detail. Lithium obtains its preferred coordination number 4 by a chelation with one molecule of 1,2-dimethoxyethane (Li? O 202 to 204 pm).     

Copolymerization of styrene with (Z)-1,3-pentadiene in the presence of a syndiotactic-specific catalyst

Copolymerization of styrene with (Z)-1,3-pentadiene affords copolymers mostly containing 1,2 pentadiene units. Both the styrene and the pentadiene units are in syndiotactic arrangement but the comonomer sequence distribution is far from bernoullian. Interestingly, the behavior of (Z)-1,3-pentadiene does not change much when polymerization temperature raises from −20 to +20°C, notwithstanding that (Z)-1,3-pentadiene affords a 1,2-syndiotactic homopolymer at −20°C but a prevailingly 1,4 cis homopolymer at +20°C. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2697–2702, 1997     

Trimethylsilylverbindungen der Vb-Elemente. V. Molekül- und Kristallstruktur des Lithium-bis(trimethylsilyl)-arsenids · DME

Trimethylsilyl Derivatives of Vb-Elements. V. Molecular and Crystal Structure of Lithium Bis(trimethylsilyl)arsenide · DME Lithium bis(trimethylsilyl)arsenide · DME 1 obtained from tris(trimethylsilyl)-arsine and n-butyl or methyl lithium in 1,2-dimethoxyethane crystallizes monoclinic with {a = 1813(3); b = 1327(3); c = 968(1) pm; β = 119.3(1)°; Z = 4} at +20°C. Experimental conditions unfavourable for an X-ray structure determination caused high standard deviations of all structural parameters. The refinements of these values calculated with respect to the centrosymmetric space group C2/m converged at a relatively high R-value of 0.090. In contrast to the homologous antimonide lithium bis(trimethylsilyl)arsenide · DME 1 is found to be dimeric in solution as well as in the solid state. The four-membered ring built up by bis(trimethylsilyl)arsino groups and DME-coordinated lithium atoms in alternating sequence is planar; the carbon atoms statistically occupy positions on both sides of a mirror plane. Characteristic bond lengths and angles are: As? Si 230.7(7); As? Li 259(2); Li? O 205(4) and 215(4) pm; Si? As? Si 103.2(4)°; Li? As? Li 81(1)°; As? Li? As 99(1)° and Li? As? Si 115(1)°.     

NMR experiments on acetals—56 : Conformational study of 1,3-dioxene

From the ¹H-NMR parameters, extracted from the spectra of 1,3-dioxene, 5-Me-1,3-diox-4-ene, 4,5-diMe-1,3-diox-4-ene and of 2,4,5-triMe-1,3-diox-4-ene, it follows that the preferred conformations are the 1,2-diplanar (sofa) C₂ form (Fig. 1B). The barrier to ring reversal in 5-Me-1,3-dioxene was found to be 7·2±0·2 kcal/mole at ?123° (in freon-21).     

Diethylbis(2,2′‐bipyridine)iron/MAO. A Very Active and Stereospecific Catalyst for 1,3‐Diene Polymerization

Diethylbis(2,2′‐bipyridine)Fe/MAO is an extremely active catalyst for the polymerization of 1,3‐dienes. Polymers with a 1,2 or 3,4 structure are formed from butadiene, isoprene, (E)‐1,3‐pentadiene and 3‐methyl‐1,3‐pentadiene, while cis‐1,4 polymers are derived from 2,3‐dimethyl‐1,3‐butadiene. The 1,2 (3,4) polymers obtained at 25°C are amorphous, while those obtained below 0°C are crystalline, as was determined by means of X‐ray diffraction. Mechanistic implications of the results are briefly discussed.     

Metallderivate von Molekülverbindungen. IV. Synthese,Struktur und Reaktivität des Lithium-[tris-(trimethylsilyl)silyl]tellanids · DME

Metal Derivatives of Molecular Compounds. IV Synthesis, Structure, and Reactivity of Lithium [Tris(trimethylsilyl)silyl]tellanide · DME Lithium tris(trimethylsilyl)silanide · 1,5 DME [3] and tellurium react in 1,2-dimethoxyethane to give colourless lithium [tris(trimethylsilyl)silyl]tellanide · DME ( 1 ). An X-ray structure determination {-150 · 3·C; P2₁/c; a = 1346.6(4); b = 1497.0(4); c = 1274.5(3) pm; β = 99.22(2)·; Z = 2 dimers; R = 0.030} shows the compound to be dimeric forming a planar Li? Te? Li? Te ring with two tris(trimethylsilyl)silyl substituents in a trans position. Three-coordinate tellurium is bound to the central silicon of the tris(trimethylsilyl)silyl group and to two lithium atoms; the two remaining sites of each four-coordinate lithium are occupied by the chelate ligand DME {Li? Te 278 and 284; Si? Te 250; Li? O 200 pm (2X); Te? Li? Te 105°; Li? Te? Li 75°; O? Li? O 84°}. The covalent radius of 154 pm as determined for the DME-complexed lithium in tellanide 1 is within the range of 155 ± 3 pm, also characteristic for similar compounds. In typical reactions of the tellanide 1 [tris(trimethylsilyl)silyl]tellane ( 2 ), methyl-[tris(trimethylsilyl)silyl]tellane ( 4 ) and bis[tris(trimethylsilyl)silyl]ditellane ( 5 ) are formed.     

Acyl- und Alkylidenphosphane. XXXII [1, 2]. Di-cyclo-hexoyl- und Diadamant-1-oylphosphan — Keto-Enol-Tautomerie und Struktur

Acyl- and Alkylidenephosphines. XXXII. Di-cyclohexoyl- and Diadamant-1-oylphosphine – Keto-Enol Tautomerism and Structure Lithium dihydrogenphosphide · DME (¹) [12] and cyclo-hexoyl or adamant-1-oyl chloride react in a molar ratio of 3:2 to give lithium di-cyclo-hexoylphosphide · DME and the corresponding diadamant-1-oylphosphide.2THF (¹) resp. Treatment of these two compounds with 85% tetrafluoroboric acid. diethylether adduct yields di-cyclo-hexoyl- ( 1b ) and diadamant-1-oylphosphine ( 1c ). In nmr spectroscopic studies 1b over a range of 203 to 343 K, a strong temperature dependence of the keto-enol equilibrium is found; thermodynamic data characteristic for the formation of the enol tautomer (ΔH⁰ = ?4.3 kJ. mol^?1; ΔS⁰ = ?9.2 J. mol^?1. K (^?1) are compared of 1,3-diketones. The enol tautomer of diadamant-1-oylphosphine ( E-1c ) as obtained from a benzene solution in thin colourless plates, crystallizes in the monoclinic space group P2₁/c {a = 722.2(2); b = 1085.5(4); c = 2434.8(5) pm; ß = 96.43(2)° at –100 ± 3°C; Z = 4}. An X- ray structure analysis (R_w = 0.033) shows bond lengths and angles to be almost identical within the enolic system (P? C 179/180; C? O 130/129; C? C(adamant-1-yl) 152/153 pm; C? P? C 99°; P? C? O 124°/124°; P? C? C 120°/120°; C? C? O 116°/116°. The geometry of the very strong, but probably asymmetric O‥H‥O bridge is discussed (O? H 120/130, O‥O 245 pm).     

Reactions of 1-halocyclohexenes and methyl substituted 1-halocyclohexenes with potassium t-butoxide

Reactions of 1-halocyclohexenes and 1-halo-4-methylcyclohexenes with potassium t-butoxide (t-BuOK) in dimethyl sulfoxide and tetrahydrofuran have been shown to take place by three competing dehydrohalogenation mechanisms. These are: dehydrohalogenation across the C₁C₆ bond to give a cyclohexyne; dehydrohalogenation across the C₁C₆ bond to give a 1,2-cyclohexadiene: and prototropic rearrangement to the corresponding 3-halocyclohexene, followed by β-elimination to a 1,3-cyclohexadiene. The highly strained cyclohexyne and 1,2-cyclohexadiene intermediates react with t-BuOK to give 1-t-butoxycyclohexene, which is obtained in yields ranging from 5–20% in DMSO to about 60% in THF. Competitive with the substitution reaction is dimerization of 1,2-cyclohexadiene to tricyclo[6.4.0.0^2,7]-dodeca-2,12-diene, and 1,2- and 1,4-cycloaddition of 1,2- and 1,3-cyclohexadiene.     

Electrocyclic reactions of tetraenes: Influence of terminal substituents

Conjugated tetraenes with both central double bonds of cis configuration undergo a series of thermal reactions, the observable products being markedly dependent on the nature of the terminal substituents. Dimethyl 2E,4Z,6Z,8E-decatetraene-1,10-dioate (16) was prepared and found to cyclize readily at 50° to trans dimethyl 2,4-bicyclo[4.2.0)octadiene-6,7-dicarboxylate (18). This reaction proceeds to equilibrium, and the rates and equilibrium constants at the indicated temperatures are: 3.0 × 10^-5 sec^-1 ?40°; 8.2 × 10^-5 sec^-1, 16.0,50°; ?10.0,75°; ?7.47,100° with the equilibrium favoring (18). A sample of 1,8-diphenyl-1E,3Z,5Z;7E-octatetraene (1) showed no reaction below 120°, and at 175° all trans 1,8-diphenyl-octatetraene, cis and trans stilbenes, trans-5-phenyl-6(cis-styryl)-1,3-cyclohexadiene cis-5-phenyl-6-(trans-styryl)-1,3-cyclohexadiene, and cis and trans 6,8-diphenyl-tricyclo[3.2.1.0^2.7]oct-3-enes were formed. At 100° in the presence of excess dimethyl acetylenedicarboxylate 1 gave dimethyl trans-3,4-diphenyltricyclo[4.2.2.0^2.5]deca-6,9-dien-6,7-dicarboxylate. Finally 1,4-di(1-cyclohexen-1-yl)-1,3-batadiyne, hydrogenated over a Lindlar catalyst, gave only tricyclo[10.4.0.0^6,11]hexadeca-1,3,5-triene.     

Acyl- und Alkylidenphosphane. XXII [1]. Synthese und Struktur des 1, 3-Dimethyl-2,2,4,4-tetrakis-(trimethylsilylsulfano)-1,3-diphosphetans

Acyl- and Alkylidenephosphines. XXII. Synthesis and Structure of 1, 3-Dimethyl-2,2,4,4-tetrakis(trimethylsilylsulfano)-1,3-diphosphetane At ?30°C methylbis(trimethylsilyl)phosphine reacts with carbon disulfide to give a red adduct first which rearranges to [bis(trimethylsilylsulfano)methylidene]methylphosphine 1a . In contrast to the thermally stable phenyl derivative 1b [2], this compound with its insufficiently shielded P?C group dimerizes fast with increasing temperature. 1,3-Dimethyl-2,2,4,4-tetrakis(trimethylsilylsulfano)-1,3-diphosphetane 2a formed by this reaction, crystallizes in the triclinic space group P1 with following dimensions of the unit cell, determined at a temperature of measurement of ?80 ± 3°C: a = 1024.7(3); b = 1360.2(5); c = 1326.3(6)pm; α = 117.85(4); ß = 111.05(3); γ = 72.09(3)°; Z = 2. Due to ring folding at the P1? P2 axis of 149.1°, the molecule shows pseudosymmetry C_s. Characteristic averaged bond lengths and angles obtained at an R_w-value of 0.030, are: P? C(endocyclic) 188 and 191; P? CH₃ 184; C? S 183; S? Si 216 pm; C? P? CH₃ 105; P? C? S 113; S? C? S 114; C? S? Si 108; P? C? P 90 and C? P? C 86°.     

由N-苯基[1,3]苯并噁嗪正离子与烯烃[4+2]反应合成喹啉并[1,2-c][1,3]苯并噁嗪-6-酮衍生物

以BF3·OEt2 为催化剂, 在室温下通过4-羟基-N-苯基[1,3]苯并噁嗪-2-酮的脱羟基产生N-苯基[1,3]苯并噁嗪正离子, 然后与富电子烯烃发生Diels-Alder反应, 合成出了一系列喹啉并[1,2-c][1,3]苯并噁嗪-6-酮和喹啉并[1,2-c][1,3]萘并噁嗪-6-酮衍生物.     

Some cycloaddition reactions of halomethylenecyclopropanes

Bromo-,chloro- and ethoxymethylenecyclopropane 3–5 undergo head to head dimerzations at 185–195° to give the corresponding 7,8-disubtituted dispiro[2.0.2.2]octanes 6–8 in high yields. Chloromethylenecyclopropane 4 undergoes cross cycloaddition reactions with near equimolar amounts of 3 and 5 to give about 50% of the corresponding mixed 7,8-disubstituted dispiro[2.0.2.2]octanes together with equal parts of 6 and 7 or 6 and 8. Bromo- and choromethylenecyclopropane also undergo similar cross cycloaddition reactions with methelene-cyclopropane to give the 7-halodispiro[2.0.2.2]octanes, but in relatively poor yields. At 190°, 4 reacts with 1,3-cyclopentadiene, furan, and 1,3-cyclohexadiene to give the products of (2+4) cycloaddition 12–14. With 2,3-dimethyl-1,3-butadiene at 190° ,4 gives the unusual products 18–20 in yields of 35%, 8% and 13%, respectively, and with acryloionitrile 4 gives exclusively 21, the product of (2+2) cycloaddition. Relative reactivities of 4 with furan, 2,3-dimethyl-1,3-butadiene, 1,3-cyclohexadiene, acrylonitrile and 1,3-cyclopentadiene were estimated as 1:2.5:2.5:4:and 50,respectively.     

Nickel-catalyzed addition of C-H bonds of terminal alkynes to 1,3-dienes and styrenes

The C-H bond of a terminal alkyne adds to a carbon-carbon double bond of 1,3-dienes, styrenes, and norbornene at room temperature in the presence of a nickel catalyst in regio- and stereoselective manners. Reaction of triisopropylsilylacetylene with 1-substituted 1,3-butadiene derivatives afforded hydroalkynylation products via introduction of a hydrogen atom and a triisopropylsilylethynyl group to 4- and 3-positions of the dienes, respectively. Likewise, 1-triisopropylsiloxy-1,3-butadiene, 1,3-pentadiene, 1-cyclohexen-1-yl-1,3-butadiene, and 1,3-cyclohexadiene underwent the hydroalkynylation reaction, giving the corresponding 1,4-enyne derivatives in good yields at room temperature. Reaction of p-substituted styrene with triisopropylsilylacetylene also proceeded in the presence of the nickel catalyst, giving the branched hydroalkynylation products in good yields. Norbornene gave a exo-addition product in good yield under the same reaction conditions.