Computer simulation of ion chromatography separation: an algorithm enabling continuous monitoring of anion distribution on an ion-exchange chromatography column

A computer algorithm for the calculation of ion chromatography separation is presented. It is based on the calculation of equilibrium concentrations of present analyte in discrete column segments. The continuous column is treated as a number of discrete cells or segments where the equilibration process between the stationary phase and the eluent is simulated. The ion-exchange equilibration process is supposed to be instantaneous and quantitative. The continuous flow of the eluent is rendered by discrete transfers. The size of each transfer of the eluent corresponds to a portion of the volume contained in one column segment. The equilibrium calculations in all column segments are repeated for each transfer of the eluent, through all the stages of the chromatographic process. The distribution of the analytes between the stationary phase and the eluent can be monitored at any step and in any column segment which means that the described algorithm provides the spatial and time concentration profiles. The simulated chromatogram is acquired as a time-concentration profile in the last column segment. The obtained chromatograms are in good agreement with the experimental ones. The distribution of ions between the stationary phase and the eluent in the early stages of the ion chromatographic process can thus be studied with confidence.     

Investigation of the ion-exchange properties of methacrylate-based mixed-mode monolithic stationary phases employed as stationary phases in capillary electrochromatography

The potential of methacrylate-based mixed-mode monolithic stationary phases bearing sulfonic acid groups for the separation of positively charged analytes (alkylanilines, amino acids, and peptides) by capillary electrochromatography (CEC) is investigated. The retention mechanism of protonated alkylanilines as positively charged model solutes on these negatively charged mixed-mode stationary phases is investigated by studying the influence of mobile phase and stationary phase parameters on the corrected retention factor which was calculated by taking the electrophoretic mobility of the solutes into consideration. It is shown that both solvophobic and ion-exchange interactions contribute to the retention of these analytes. The dependence of the corrected retention factor on (1) the concentration of the counter ion ammonium and (2) the number of methylene groups in the alkyl chain of the model analytes investigated shows clearly that a one-site model (solvophobic and ion-exchange interactions take place simultaneously at a single type of site) has to be taken to describe the retention behaviour observed. Comparison of the CEC separation of these charged analytes with electrophoretic mobilities determined by open-tubular capillary electrophoresis shows that mainly chromatographic interactions (solvophobic and ion-exchange interactions) are responsible for the selectivity observed in CEC, while the electrophoretic migration of these analytes plays only a minor role.     

Computational method for modeling of gradient separation in ion-exchange chromatography

A model for the simulation of the gradient separation in ion-exchange chromatography is presented. It is based on discontinuous plate model and simulates the distribution of analytes in the ion-exchange column during the separation process. It enables calculations of chromatograms for the analytes with integer and non-integer effective charges under complex gradient profiles. Equilibrium concentrations of all analytes are calculated using the same mathematical equations and expressions regardless of the effective charge on the analyte. The main parameters required for the simulations have to be determined under isocratic elution. The suitability of the model was tested with different types of gradients. A comparison of retention times and chromatograms shows that reliable predictions for all tested gradients are achieved. The observed average of the absolute values of the relative errors of the retention times obtained for any analyte in the present study from the calculated chromatograms is below 4%, while the average error considering all analytes in the study is below 2%.     

A novel silica based click lysine anion exchanger for ion exchange chromatography

Ion chromatography (IC) is one of the most powerful analysis technologies for the determination of charged compounds. A novel click lysine stationary phase was prepared via Cu(I) catalyzed alkyne-azide 1,3-dipolar cycloaddition (CuAAC) and applied to the analysis of inorganic ions. The chromatographic evaluation demonstrated good performance (e.g. the plate number of thiocyanate is ～50,000 plates m(-1)) and effective separation ability for the common inorganic anions with aqueous Na(2)SO(4) eluent. The separation mechanism was observed to be mainly dominated by ion exchange interaction. The retention of these analytes is highly dependent on the pH value of eluent. Compared with the lysine stationary phase prepared via the conventional manner, the click lysine exchanger demonstrated shorter retention time and better ion separation characteristics under the same chromatographic conditions, which is a great advantage for rapid separation and analysis of inorganic ions.     

Optimization of gradient profiles in ion-exchange chromatography using computer simulation programs

Optimization procedure of gradient separations in ion-exchange chromatography using simplex optimization method in combination with the computer simulation program for ion-exchange chromatography is presented. The optimization of parameters describing gradient profile for the separation in ion chromatography is based on the optimization criterion obtained from calculated chromatograms. The optimization criterion depends on the parameters used for calculations and thus exhibits the quality of gradient conditions for the separation of the analytes. Simplex method is used to calculate new gradient profiles in order to reach optimum separations for the selected set of analytes. The Simplex algorithm works stepwise, for each new combination of parameters that describe the gradient profile a new calculation is performed and from the calculated chromatogram the optimization criterion is determined. The proposed method is efficient and may reduce the time and cost of analyses of complex samples with ion-exchange chromatography.     

Preparation and evaluation of rigid porous polyacrylamide-based strong cation-exchange monolithic columns for capillary electrochromatography

A CEC monolithic column with strong cation-exchange (SCX) stationary phase based on hydrophilic monomers was prepared by in situ polymerization of acrylamide, methylenebisacrylamide, and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) in a complete organic binary porogenic solvent consisting of DMSO and dodecanol. The sulfonic groups provided by the monomer AMPS on the surface of the stationary phase generate an EOF from anode to cathode, and serve as an SCX stationary phase at the same time. The monolithic stationary phase exhibited normal-phase chromatographic behavior for neutral analytes. For charged analytes, electrostatic interaction/repulsion with the monolith was observed. The strong SCX monolithic column has been successfully employed in the electrochromatographic separation of basic drugs, peptides, and alkaloids extracted from natural products.     

Preparation and characterization of mixed-mode monolithic silica column for capillary electrochromatography

A silica-based monolithic stationary phase with mixed-mode of reversed phase (RP) and weak anion-exchange (WAX) for capillary electrochromatography (CEC) has been prepared. The mixed-mode monolithic silica column was prepared using the sol–gel technique and followed by a post-modification with hexadecyltrimethoxysilane (HDTMS) and aminopropyltrimethoxysilane (APTMS). The amino groups on the surface of the stationary phase were used to generate a substantial anodic EOF as well as to provide electrostatic interaction sites for charged compounds at low pH. A cathodic EOF was observed at pH above 7.3 due to the full ionization of residual silanol groups and the suppression in the ionization of amino groups. A variety of analytes were used to evaluate the electrochromatographic characterization and column performance. The monolithic stationary phase exhibited RP chromatographic behavior toward neutral solutes. The model anionic solutes were separated by the mixed-mode mechanism, which comprised RP interaction, WAX, and electrophoresis. Symmetrical peaks can be obtained for basic solutes because positively charged amino groups can effectively minimize the adsorption of positively charged analytes to the stationary phase.     

Separation of negatively charged nonsteroidal anti-inflammatory drugs by reversed-phase capillary electrochromatography

Reversed-phase capillary electrochromatography in a 5-microm C18 fully packed capillary was employed to optimize the separation of negatively charged nonsteroidal anti-inflammatory drugs. The effect of the physico-chemical parameters and different analysis modes on the separation of 2-arylpropionic acids was studied and evaluated. The mobile phase composition, buffer type, concentration and pH differently influenced the peak efficiency and resolution, selectively modulating the analytes interaction with the stationary phase. The use of zwitterionic MES or acetate mobile phases strongly modulated the analytes migration order and peak efficiency. The optimum experimental conditions were found in MES buffer, pH 5.0, containing the 75% acetonitrile-methanol (1:1). All the analytes were baseline separated in a mixture in less than 13 min with peak efficiencies in the range of 78,500-84,200 N/m. Under these conditions the analytes were negatively charged and their effective electrophoretic mobilities played a role in the separation. The analysis of different pharmaceutical preparations containing anti-inflammatory drugs, e.g. drops and tablets, is also presented after a very simple sample pretreatment.     

Modification of the murakami retention model in reversed-phase high-performance liquid chromatography for micellar chromatographic separations

A retention model for micellar liquid chromatography was tested based on the data of separation of three benzodiazepins and six β-blockers. The model was obtained by analyzing changes in the microenvironment of a sorbate in transferring from the mobile to stationary phase. It can be used to describe the retention of benzodiazepins, which are neutral under the separation conditions, and the positively charged β-blockers. The calculated model coefficients are indicative of an increase in the number of 1-pentanol molecules and sodium dodecyl sulfate monomers in the microenvironment of the sorbates in transferring from the mobile to stationary phase. The solvation of the positive β-blockers by anionic surfactant monomers was higher than that of neutral benzodiazepins.     

Synthesis of ionic liquids functionalized β-cyclodextrin-bonded chiral stationary phases and their applications in high-performance liquid chromatography

Four novel ILs functionalized β-cyclodextrins (β-CDs) were prepared by treating 6-tosyl-β-cyclodextrin with 1,2-dimethylimidazole or 1-amino-1,2,3-triazole, and bonded to silica gel to obtain chiral stationary phases (CSPs) to be used in high-performance liquid chromatography (HPLC). The separation performances of these CSPs were examined with 16 chiral aromatic alcohol derivatives and 2 racemic drugs in acetonitrile-based polar-organic mobile phase. Excellent enantioseparations were achieved for most of the analytes. The highest value of resolution factor calculated is 6.868. Comparison of the performance of 8a, 8b, 8c and 8d suggests that the positively charged imidazole group provides electrostatic interactions probably through strong H-bonding with the analytes, whereas the cationic triazole, which forms a weaker ion pair with its counter ion, is more capable of participating in ion-pairing interactions with acidic analytes. However, for compounds 12 and 13, which have larger molecular volumes than the other analytes, the interactions between analytes and both cationic imidazole and its counter ion of the selectors play an important role in the chiral resolution. Moreover, the high resolutions were found to depend on the properties of the cations and anions on the selectors in combination with the chiral recognition sites on the rim of the CD. The ionic strength in mobile phase affects the relative interactions between analytes and the chiral selector as well as between analytes and solvents.     

Capillary Gas Chromatographic Separation of Carboxylic Acids Using an Acidic Water Stationary Phase

An acidic water stationary phase is used for the analysis of carboxylic acids in capillary gas chromatography (GC). Under regular pH 7 operating conditions, these analytes are largely ionized and elute poorly, if at all, from the water phase. However, by adjusting the phase to pH 2, it is found that various acids are neutralized and can be readily eluted and separated in the system. Sulfamic acid is found to provide a stable pH for the water phase over time, whereas hydrochloric acid and other more volatile additives quickly evaporate from the column. Under optimal low pH conditions, the acidic analytes yield good peak shape and are readily observed for masses investigated down to 5 ng on-column. By comparison, on a conventional non-polar capillary GC column, the same analytes display threefold more peak tailing and are not detected for masses below 30 ng on-column. Through altering the phase pH, it is found that the selectivity between certain analytes can be potentially enhanced depending on their respective pKa values and/or ionizability. The analysis of various different samples containing carboxylic acids is demonstrated and the results indicate that this approach can possibly offer unique and beneficial selectivity in such determinations.     

Improvement of proline chiral stationary phases by varying peptide length and linker

Seven new stationary phases with different number of proline units and/or different linkage to silica gel were prepared and evaluated in order to improve the performance of proline chiral stationary phases. The average separation factor achieved with the 53 analytes increases with the number of proline units in the stationary phases. When the proline peptides are directly attached to the 3-methylaminopropyl silica gel without using the 6-methylaminohexanoic acid linker, the stationary phases perform better overall. For decaproline chiral stationary phase 8, the separation also depends on the mobile phase system used. For this stationary phase, the CH2Cl2/hexanes/2-propanol system significantly outperforms the 2-propanol/hexanes system. For the 53 analytes tested, the separation factors achieved with this stationary phase compare well with those for three commercial columns.     

Reversed-phase liquid chromatography and argentation chromatography of the minor capsaicinoids

An investigation of the liquid chromatography of the minor capsaicinoids in a commercial capsaicinoid mixture is reported. Twelve stationary phases including C₈, C₁₈, C₃₀, phenyl, and cation-exchange chemistries were examined in combination with isocratic aqueous methanol and aqueous acetonitrile mobile phases. A phenyl stationary phase and aqueous acetonitrile mobile phase baseline-resolved 7 of 11 capsaicinoids, and selected ion chromatograms (LC–ESI-MS) demonstrated this was the most effective reversed-phase separation. Argentation chromatography with an alkyl or phenyl column and aqueous silver nitrate–methanol mobile phase revealed the presence of the 6-ene-8-methyl and 6-ene-9-methyl homocapsaicin isomers and the absence of 7-ene-9-methyl homocapsaicin. A mixed phenyl–cation-exchange stationary phase (charged with silver ion) enabled unique and useful separations of the capsaicinoids.     

On-column trace enrichment by sequential frontal and elution electrochromatography II. Enhancement of sensitivity by segmented capillaries with z-cell configuration--application to the detection of dilute samples of moderately polar and nonpolar pesticides

An on-column trace enrichment method for capillary electrochromatography of dilute samples is described. It involves the sequential use of frontal and elution electrochromatography on a segmented capillary column comprising of two contiguous segments each packed with a different sorbent. While the entering segment is for preconcentration by frontal electrochromatography the second segment is much longer and is meant for separation of the enriched analytes in the subsequent elution electrochromatography step. The preconcentration segment is usually packed with a sorbent that affords the highest affinity towards the solutes of interest while the separation segment is packed with a stationary phase that exhibits the highest selectivity and separation efficiency for the analytes. The detection is performed in the UV using a z-cell configuration for achieving an increased path length for detection. The effectiveness of this on-column trace enrichment is demonstrated on dilute samples of moderately polar solutes (e.g., carbamate insecticides) and nonpolar solutes (e.g., pyrethroid insecticides). Under optimal frontal and elution electrochromatography conditions. 817- and 1100-fold sensitivity increase are achieved for permethrin (a pyrethroid insecticide) and methiocarb (a carbamate insecticide), respectively, with a UV detector. The method is demonstrated with real water samples (e.g., tap and lake water samples) spiked with carbamate and pyrethroid insecticides. The limits of detection for the pesticides achieved in tap and lake waters reached 10(-8) to 10(-9) M.     

Multiresidue analysis of tranquilizers and the beta-blocker Carazolol in meat by liquid chromatography/tandem mass spectrometry

A fast and simple method for the quantification of a number of tranquilizers and the beta-blocker Carazolol in pork and bovine kidney is described. Extracts are purified/concentrated by a solid phase extraction step and separated on a reversed phase column with an alkaline (ammonia) acetonitrile gradient. The electrospray tandem mass spectrometer is operated in positive ion multireaction monitoring mode. Resulting chromatograms are free of interfering peaks. The recovery is >75% for all analytes and the limit of detection <1 ppb, which is well below the current maximum residue limit for the various compounds.     

Improvement of peak shape in aqueous normal phase analysis of anionic metabolites

The problem of poor peak shape for multiply charged negative-ion analytes under aqueous normal phase (ANP) conditions is investigated. Because less than adequate efficiency and symmetry can occur with a variety of mobile phases, gradients and additives, and to varying degrees depending on the instrument, sources other than solute/stationary phase interactions are more likely the cause. Since it is known that many of these compounds can interact strongly with metal ions, addition of a chelating agent to the mobile phase and/or the sample solvent was tested. In particular, ethylenediaminetetraacetic acid (EDTA) is a compound that forms strong complexes with most di-and tri-valent metal ions and can be used to verify whether trace amounts of these species are the source of the problem. In addition, the retention of a number of anionic compounds was measured at various concentrations of ammonium acetate and formate with EDTA in the mobile phase.     

Fluoroalcohols as novel buffer components for basic buffer solutions for liquid chromatography electrospray ionization mass spectrometry: retention mechanisms

Two fluoroalcohols--1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) and 1,1,1,3,3,3-hexafluoro-2-methyl-2-propanol (HFTB)--were evaluated as volatile buffer acids in basic mobile phases for LC-ESI-MS determination of acidic and basic compounds. HFIP and HFTB as acidic buffer components offer interesting possibilities to adjust retention behavior of different analytes and expand the currently rather limited range of ESI-compatible buffer systems for basic mobile phases. Comparing with commonly used basic buffer components the fluoroalcohols did not suppress the ionization of the analytes, for several analytes ionization enhancement was observed. RP chromatographic retention mechanisms were evaluated and compared to traditional buffer system. All trends in retention of the acidic and basic analytes can be interpreted by the following model: the neutral fluoroalcohols are quite strongly retained by the stationary phase whereas their anions are less retained, thus their amount on the stationary phase is dependent on mobile phase pH; the anions of the fluoroalcohols form ion pairs in the mobile phase with the basic analytes; the fluoroalcohols on the stationary phase surface compete with acidic analytes thereby hindering their retention; the fluoroalcohols on the stationary phase bind basic analytes thereby favoring their retention.     

Separation of nucleotides by hydrophilic interaction chromatography using the FRULIC-N column

A stationary phase composed of silica-bonded cyclofructan 6 (FRULIC-N) was evaluated for the separation of four cyclic nucleotides, six nucleoside monophosphates, four nucleoside diphosphates, and five nucleoside triphosphates via hydrophilic interaction chromatography (HILIC) in both isocratic and gradient conditions. The gradient conditions gave significantly better separations by narrowing peak widths. Sixteen out of nineteen nucleotides were baseline separated on the FRULIC-N column in one run. Unlike other known HILIC stationary phases, there can be dual-retention mechanisms unique to this media. Traditional hydrogen bonding/dipolar interactions can be supplemented by dynamic ion interaction effects for anionic analytes. This occurs because the FRULIC-N stationary phase is able to bind certain buffer cations. The extent of the ion interaction is tunable, in comparison to stationary phases with embedded charged groups, where the inherent ionic properties are fixed. The best mobile phase conditions were determined by varying the organic modifier (acetonitrile) content, as well as salt type/concentration and electrolyte pH. The thermodynamic characteristic of the FRULIC-N column was investigated by evaluating the column temperature effect on retention and utilizing van’t Hoff plots. This study shows that there is a greater entropic contribution for the retention of nucleotide di and triphosphates, whereas there is a greater enthalphic contribution for the cyclic nucleotides with the FRULIC-N column.     

Quantitative determination of a nonpeptide antithrombotic in dog plasma by microbore high-performance liquid chromatography-tandem mass spectrometry utilizing pneumatically assisted electrospray ionization

A method has been developed and is described for the quantitative determination of a nonpeptide antithrombotic in dog plasma. The assay employs reversed phase microbore high-performance liquid chromatography in conjunction with tandem mass spectrometry utilizing pneumatically assisted electrospray ionization. The analyte and internal standard are isolated from the plasma matrix by solid-phase extraction. The mass spectrometer is operated in the positive ion multiple reaction monitoring mode and is set to detect the presence of a precursor-product ion pair for both the analyte and internal standard to generate product ion chromatograms for both species. The analyte is quantified by using weighted least-squares regression of the peak height ratio of drug:internal standard. The method provides linear response for plasma concentrations ranging from 5 ng/mL (25 pg on-column) to 2500 ng/mL. Statistical evaluation and examples of authentic sample assays are also presented.     

Separation of basic compounds of pharmaceutical interest by using nano-liquid chromatography coupled with mass spectrometry

Nano-liquid chromatography-mass spectrometry (nano-LC-MS) was evaluated for the separation of basic compounds of pharmaceutical interest. The separation of selected beta-blockers, namely nadolol, oxprenolol, alprenolol and propranolol in the presence of terbutaline was performed using two 75 microm I.D. capillaries packed with two different RP18 stationary phases (SP). The best results concerning resolution and efficiency were achieved using the SP where free silanol groups were not present. As expected, this latter SP proved to be very efficient and symmetry factors were observed mainly in the case of the more retained analytes. Baseline resolution of all studied basic compounds was achieved with the Cogent bidentate C18 silica phase (CBC18) eluting analytes at 800 nL/min with a mobile phase containing 500 mM ammonium acetate pH 4.5-water-methanol (1:8:91, v/v/v). The separated basic compounds were revealed using on-column UV detector at 205 nm and electrospray-ion-trap mass spectrometer (ESI-MS). The packed capillary was connected to the MS through a commercial sheath liquid interface or a sheathless nano-spray interface and in both cases the sensitivity was studied and the results compared. Limit of detection (LOD) as low as 0.1 ng/mL was measured for nadolol using the sheathless nano-spray interface and the capillary column packed with the CBC18 stationary phase.