An Approach to Preparing Ni–P with Different Phases for Use as Supercapacitor Electrode Materials

Herein, we describe a simple two‐step approach to prepare nickel phosphide with different phases, such as Ni₂P and Ni₅P₄, to explain the influence of material microstructure and electrical conductivity on electrochemical performance. In this approach, we first prepared a Ni–P precursor through a ball milling process, then controlled the synthesis of either Ni₂P or Ni₅P₄ by the annealing method. The as‐prepared Ni₂P and Ni₅P₄ are investigated as supercapacitor electrode materials for potential energy storage applications. The Ni₂P exhibits a high specific capacitance of 843.25 F g^?1, whereas the specific capacitance of Ni₅P₄ is 801.5 F g^?1. Ni₂P possesses better cycle stability and rate capability than Ni₅P₄. In addition, the Fe₂O₃//Ni₂P supercapacitor displays a high energy density of 35.5 Wh kg^?1 at a power density of 400 W kg^?1 and long cycle stability with a specific capacitance retention rate of 96 % after 1000 cycles, whereas the Fe₂O₃//Ni₅P₄ supercapacitor exhibits a high energy density of 29.8 Wh kg^?1 at a power density of 400 W kg^?1 and a specific capacitance retention rate of 86 % after 1000 cycles.     

MnO2 Nanosheets Grown on Nitrogen‐Doped Hollow Carbon Shells as a High‐Performance Electrode for Asymmetric Supercapacitors

A hierarchical hollow hybrid composite, namely, MnO₂ nanosheets grown on nitrogen‐doped hollow carbon shells (NHCSs@MnO₂), was synthesized by a facile in situ growth process followed by calcination. The composite has a high surface area (251 m²g^?1) and mesopores (4.5 nm in diameter), which can efficiently facilitate transport during electrochemical cycling. Owing to the synergistic effect of NHCSs and MnO₂, the composite shows a high specific capacitance of 306 F g^?1, good rate capability, and an excellent cycling stability of 95.2 % after 5000 cycles at a high current density of 8 A g^?1. More importantly, an asymmetric supercapacitor (ASC) assembled by using NHCSs@MnO₂ and activated carbon as the positive and negative electrodes exhibits high specific capacitance (105.5 F g^?1 at 0.5 A g^?1 and 78.5 F g^?1 at 10 A g^?1) with excellent rate capability, achieves a maximum energy density of 43.9 Wh kg^?1 at a power density of 408 W kg^?1, and has high stability, whereby the ASC retains 81.4 % of its initial capacitance at a current density of 5 A g^?1 after 4000 cycles. Therefore, the NHCSs@MnO₂ electrode material is a promising candidate for future energy‐storage systems.     

Ultrahigh Energy Density Realized by a Single‐Layer β‐Co(OH)2 All‐Solid‐State Asymmetric Supercapacitor

A conceptually new all‐solid‐state asymmetric supercapacitor based on atomically thin sheets is presented which offers the opportunity to optimize supercapacitor properties on an atomic level. As a prototype, β‐Co(OH)₂ single layers with five‐atoms layer thickness were synthesized through an oriented‐attachment strategy. The increased density‐of‐states and 100 % exposed hydrogen atoms endow the β‐Co(OH)₂ single‐layers‐based electrode with a large capacitance of 2028 F g^?1. The corresponding all‐solid‐state asymmetric supercapacitor achieves a high cell voltage of 1.8 V and an exceptional energy density of 98.9 Wh kg^?1 at an ultrahigh power density of 17 981 W kg^?1. Also, this integrated nanodevice exhibits excellent cyclability with 93.2 % capacitance retention after 10 000 cycles, holding great promise for constructing high‐energy storage nanodevices.     

Fluorine‐Doped Fe2O3 as High Energy Density Electroactive Material for Hybrid Supercapacitor Applications

Nanostructured α‐Fe₂O₃ with and without fluorine substitution were successfully obtained by a green route, that is, microwave irradiation. The hematite phase materials were evaluated as a high‐performance electrode material in a hybrid supercapacitor configuration along with activated carbon (AC). The presence of fluorine was confirmed through X‐ray photoelectron spectroscopy and transmission electron microscopy. Fluorine‐doped Fe₂O₃ (F‐Fe₂O₃) exhibits an enhanced pseudocapacitive performance compared to that of the bare hematite phase. The F‐Fe₂O₃/AC cell delivered a specific capacitance of 71 F g^?1 at a current density of 2.25 A g^?1 and retained approximately 90 % of its initial capacitance after 15 000 cycles. Furthermore, the F‐Fe₂O₃/AC cell showed a very high energy density of about 28 W h kg^?1 compared to bare hematite phase (～9 W h kg^?1). These data clearly reveal that the electrochemical performance of Fe₂O₃ can be improved by fluorine doping, thereby dramatically improving the energy density of the system.     

Reduced graphene oxide-CoFe2O4 composites for supercapacitor electrode

Reduced graphene oxide-CoFe₂O₄ (RGO-CoFe₂O₄) composite for supercapacitor electrodes has been investigated. On the basis of the morphological and structural characterization of the sample by scanning electron microscopy, X-ray diffraction and Fourier transform infrared spectrometer, the electrochemical performances of the sample were investigated by cyclic voltammetry and chronopotentiometry in 0.50 mol L^?1 Na₂SO₄ aqueous electrolyte. It was shown that the specific capacitance (123.2 F g^?1) of RGO-CoFe₂O₄ composite was highly improved compared with that of RGO (89.9 F g^?1), GO-CoFe₂O₄ (21.1 F g^?1) and CoFe₂O₄ (18.7 F g^?1) at the current density of 5 mA cm^?2. The capacitance retention of about 78.1% for RGO-CoFe₂O₄ after 1000 cycles indicated that it has high cycle stability.     

Application of a novel redox-active electrolyte in MnO2-based supercapacitors

This paper reports a novel strategy for preparing redox-active electrolyte through introducing a redox-mediator(p-phenylenediamine,PPD) into KOH electrolyte for the application of ball-milled MnO 2-based supercapacitors.The morphology and compositions of ball-milled MnO 2 were characterized using scanning electron microscopy(SEM) and X-ray diffraction(XRD).The electrochemical properties of the supercapacitor were evaluated by cyclic voltammetry(CV),galvanostatic charge-discharge(GCD),and electrochemical impedance spectroscopy(EIS) techniques.The introduction of p-phenylenediamine significantly improves the performance of the supercapacitor.The electrode specific capacitance of the supercapacitor is 325.24 F g-1,increased by 6.25 folds compared with that of the unmodified system(44.87 F g-1) at the same current density,and the energy density has nearly a 10-fold increase,reaching 10.12 Wh Kg-1.In addition,the supercapacitor exhibits good cycle-life stability.     

Nanosized Fe3O4-modified activated carbon for supercapacitor electrodes

Nanosized Fe₃O₄-modified activated carbon composites for supercapacitor electrodes have been investigated. Structural and morphological characterizations of activated materials are carried out using X-ray diffraction and scanning electron microscopy, respectively. The electrochemical performances of the composite electrodes are evaluated by cyclic voltammetry, chronopotentiometry and electrochemical impedance spectroscopy. The experimental results show that the specific capacitances of the 10 wt % Fe₃O₄-modified activated carbon composite electrode (154.3 F g^?1) is highly improved compared with that of Fe₃O₄ (78.5 F g^?1) and AC (79.2 F g^?1) at the current density of 5 mA cm^?2, respectively. The charge/discharge tests show that it could retain 79.6% of its initial capacitance over 1000 cycles, suggesting its potential application for the fabrication of high-quality supercapacitors.     

Bifunctional Reduced Graphene Oxide/V2O5 Composite Hydrogel: Fabrication,High Performance as Electromagnetic Wave Absorbent and Supercapacitor

Multifunctional graphene hydrogels have attracted great attention aimed at practical applications. Herein, the novel and bifunctional composite hydrogel containing reduced graphene‐oxide nanosheets (RGO) and V₂O₅ nanobelts (RGO/V₂O₅) is successfully prepared for the first time. Surprisingly, tridimensional (3D) RGO/V₂O₅ composite hydrogels cannot only be used as high‐performance electromagnetic (EM) wave absorbents; they also exhibit excellent properties suitable for supercapacitor electrodes. The composites exhibit a maximum absorption of up to ?21.5 dB. In particular, a composite hydrogel showed a bandwidth of 6.63 GHz, corresponding to a reflection loss at ?10 dB, which opens the possibility for the use of 3D graphene with other functional nanomaterials as lightweight and high‐performance EM wave absorption materials. Remarkably, the composite hydrogel is capable of delivering a high specific capacitance of about 320 F g^?1 at a current density of 1.0 A g^?1.     

Mn3−xFexO4 Hollow Nanostructures for High-Performance Asymmetric Supercapacitor Applications

Design of hollow nanostructure and controllable phase of mixed metal oxides for improving performance in supercapacitor applications is highly desirable. Here we demonstrate the rational design and synthesis of Mn_3−xFe_xO₄ hollow nanostructures for supercapacitor applications. Owing to high porosity and the specific surface area that provides more active sites for electrochemical reactions, the electrochemical performance of Mn_3−xFe_xO₄ hollow nanostructure substantially enhanced comparing with pristine Mn₃O₄. Particularly, in 1.0 M KOH electrolyte, Mn_0.16Fe_2.84O₄ with a typical diameter of 20 nm exhibits excellent specific capacitance of 2675, 2320, 1662, 987 F g⁻¹ at current densities of 1, 2, 5, 10 A g⁻¹, respectively, which is significantly superior to those of other transition metal oxides. Besides, an asymmetric supercapacitor is assembled by using Mn_0.16Fe_2.84O₄ and activated carbon as a positive and a negative electrode, respectively. Electrochemical results indicate a high energy density of 42 Wh kg⁻¹ at a power density of 0.75 kW kg⁻¹, which makes this hollow nanostructure a highly promising electrode for achieving high-performance next-generation supercapacitors.     

Study on the capacitance performance of Sn4+-doped V2O5

Sn⁴⁺-doped V₂O₅ cathode materials were prepared by a sol–gel method. The results showed that the modified cathode material was a mixture of V⁴⁺ and V⁵⁺. It was a kind of typical mesopore material with pores of 2–4 nm diameter. Symmetrical curves were obtained by cyclic voltammetry (CV) tests performed at different scanning rates and voltage ranges. In particular, the CV curve showed more obvious rectangle property and better redox properties when the scanning rate was 5 mV s^?1. At the current density of 200 mA g^?1, the maximum specific energy, specific power, and coulomb efficiency of the material were 27.25 mA h?g^?1, 494.87 W?kg^?1, and 97%, respectively. It was indicated that small amounts of Sn⁴⁺ doping would improve the surface morphology and electronic conductivity of V₂O₅. The Sn⁴⁺-doped V₂O₅ showed good capacitance characteristics.     

A hexaazatriphenylene-based porous organic polymer for high performance supercapacitor

Porous organic polymers (POPs) with high physiochemical stability and pseudocapacitive activity are crucial for supercapacitors with high specific capacitance and long cycle life. We report herein a hexaazatrinaphthylene-based POP (HPOP-1) for high-performance supercapacitor by introducing redox-active hexaazatrinaphthylene (HATN) moiety through Sonogashira–Hagihara coupling reaction. HATN moiety can undergo a proton-induced electron transfer redox reaction, which endows HPOP-1 with high pseudocapacitive activity. As electrode materials for supercapacitor application, HPOP-1 exhibits high specific capacitance (667 F g⁻¹ at 0.5 A g⁻¹) and long-term cyclic stability (90% capacitance retention after 10,000 cycles at 5 A g⁻¹) in a three-electrode system with 1 M H₂SO₄ as the electrolyte. In addition, HPOP-1 also exhibits a specific capacitance of 376 F g⁻¹ at 0.5 A g⁻¹ in 1 M KOH electrolyte. An asymmetric supercapacitor was further fabricated with HPOP-1 as negative electrode and rGO as positive electrode, respectively. The device delivers a specific capacitance of 63 F g⁻¹ at 0.5 A g⁻¹ and a rate performance of 37 F g⁻¹ at 5 A g⁻¹. Our work provides a facile approach for the design and preparation of pseudocapacitive POPs with high specific capacitance and long cycle life.     

Perovskite SrCo0.9Nb0.1O3−δ as an Anion‐Intercalated Electrode Material for Supercapacitors with Ultrahigh Volumetric Energy Density

We have synthesized and characterized perovskite‐type SrCo_0.9Nb_0.1O_3−δ (SCN) as a novel anion‐intercalated electrode material for supercapacitors in an aqueous KOH electrolyte, demonstrating a very high volumetric capacitance of about 2034.6 F cm⁻³ (and gravimetric capacitance of ca. 773.6 F g⁻¹) at a current density of 0.5 A g⁻¹ while maintaining excellent cycling stability with a capacity retention of 95.7 % after 3000 cycles. When coupled with an activated carbon (AC) electrode, the SCN/AC asymmetric supercapacitor delivered a specific energy density as high as 37.6 Wh kg⁻¹ with robust long‐term stability.     

A high-performance hybrid supercapacitor with Li4Ti5O12-C nano-composite prepared by in situ and ex situ carbon modification

In this work, we report on the synthesis of in situ and ex situ carbon-modified Li₄Ti₅O₁₂-C (LTO-C) nano-composite and its application in a hybrid supercapacitor constructed using activated carbon (AC) and LTO-C nano-composite as positive and negative electrodes, respectively. The hybrid capacitors are characterized by galvanostatic charge–discharge, cycle life testing, and electrochemical impedance spectroscopy. The results reveal that the AC/LTO-C hybrid capacitors exhibit high rate capability and long cycle life. In the potential range of 1.5–3.0 V, the AC/LTO-C hybrid system can deliver a specific capacitance of 83 F?g^?1 based on the total mass of AC and LTO-C electrodes at a current density of 60 mA g^?1 (2 C rate). At a higher discharge rate of 980 mA g^?1 (32 C), the capacity is 68 F?g^?1, about 82?% of that at 2 C rate. After 9,000 deep cycles at 32 C, the hybrid capacitor still maintains 84?% of its initial capacitance. The specific energy of such hybrid system is 20 Wh kg^?1, which is at least twice that of an AC/AC system. Combining the high energy density with power capability, the AC/LTO-C hybrid supercapacitor has demonstrated high performance for applications needing high power output.     

Design of high-performance core-shell hollow carbon nanofiber@nickel-cobalt double hydroxide composites for supercapacitive energy storage

The supercapacitive performances of supercapacitor mainly depend on the physical nanostructure and micro-morphology of electrode materials. Here, we demonstrated the design, synthesis and electrochemical performances of core-shell hollow carbon nanofiber@nickel-cobalt-layered double hydroxide (HCNF@ Ni_0.67Co_0.33-LDH) nanocomposites with an optimized Ni/Co molar ratio of 2:1. The HCNF was used as superiorly conductive core to sustain the nanoporous silky Ni_0.67Co_0.33-LDH shell, which can efficiently provide fast transport pathways for electrons and electrolyte ions. The outstanding specific capacitance of 2486 F g^?1 at 1 A g^?1 based on galvanostatic charge-discharge curves were acquired for the highly electroactive HCNF@Ni_0.67Co_0.33-LDH. Furthermore, the HCNF@Ni_0.67Co_0.33-LDH electrode delivered a distinguished rate capability with a specific capacitance of 1890 F g^?1 even at 15 A g^?1. Notably, an asymmetric supercapacitor with HCNF@Ni_0.67Co_0.33-LDH as cathode and HCNF as anode was devised, which presented a prominent specific capacitance of 228 F g^?1, good energy density of 62.1 Wh kg^?1, and impressive cycling stability (90.6% capacitance retention after 10,000 cycles).     

Synthesis of Hierarchically Porous Sandwich‐Like Carbon Materials for High‐Performance Supercapacitors

For the first time, hierarchically porous carbon materials with a sandwich‐like structure are synthesized through a facile and efficient tri‐template approach. The hierarchically porous microstructures consist of abundant macropores and numerous micropores embedded into the crosslinked mesoporous walls. As a result, the obtained carbon material with a unique sandwich‐like structure has a relatively high specific surface (1235 m² g^?1), large pore volume (1.30 cm³ g^?1), and appropriate pore size distribution. These merits lead to a comparably high specific capacitance of 274.8 F g^?1 at 0.2 A g^?1 and satisfying rate performance (87.7 % retention from 1 to 20 A g^?1). More importantly, the symmetric supercapacitor with two identical as‐prepared carbon samples shows a superior energy density of 18.47 Wh kg^?1 at a power density of 179.9 W kg^?1. The asymmetric supercapacitor based on as‐obtained carbon sample and its composite with manganese dioxide (MnO₂) can reach up to an energy density of 25.93 Wh kg^?1 at a power density of 199.9 W kg^?1. Therefore, these unique carbon material open a promising prospect for future development and utilization in the field of energy storage.     

Synthesis of vanadium oxides nanosheets as anode material for asymmetric supercapacitor

Vanadium oxides (V₂O₅) have been intensely investigated for advanced supercapacitors due to its extensive multifunctional properties of typical layered structure and multiple stable oxide states of vanadium in its oxides. In this study, V₂O₅ nanosheets are synthesized via V₂O₅ xerogel solvothermal reaction in ethanol solvent at 200 °C for 12 h. The V₂O₅ nanosheets facilitate the easy accessibility of ions and can provide more area available for electrochemical reactions. We have achieved the highest specific capacitance of 298 F/g and good rate discharge for V₂O₅ electrodes. Notably, the capacitance still retains a high retention rate of 85% after 10,000 cycles at 200 mV/s. Furthermore, asymmetric supercapacitors is assembled based on V₂O₅ nanosheets and active carbon electrode, and a specific capacitance of 13.2 F/g is obtained at 1 A/g, with a energy density of 4.7 Wh/kg at a power density of 0.798 kW/kg and remains 2.28 Wh/kg at 7.992 kW/kg. Based on these results, the asymmetric supercapacitor exhibits a good cycle life with 77.3% capacitance retention after 3000 cycles. It suggests that the V₂O₅ nanosheets are promising electrode material for electrochemical supercapacitors.     

Hierarchical FeCo2S4@FeNi2S4 Core/Shell Nanostructures on Ni Foam for High-Performance Supercapacitors

The design of electrode materials with rational core/shell structures is promising for improving the electrochemical properties of supercapacitors. Hence, hierarchical FeCo₂S₄@FeNi₂S₄ core/shell nanostructures on Ni foam were fabricated by a simple hydrothermal method. Owing to their structure and synergistic effect, they deliver an excellent specific capacitance of 2393 F g⁻¹ at 1 A g⁻¹ and long cycle lifespan as positive electrode materials. An asymmetric supercapacitor device with FeCo₂S₄@FeNi₂S₄ as positive electrode and graphene as negative electrode exhibited a specific capacitance of 133.2 F g⁻¹ at 1 A g⁻¹ and a high energy density of 47.37 W h kg⁻¹ at a power density of 800 W kg⁻¹. Moreover, the device showed remarkable cycling stability with 87.0 % specific-capacitance retention after 5000 cycles at 2 A g⁻¹. These results demonstrate that the hierarchical FeCo₂S₄@FeNi₂S₄ core/shell structures have great potential in the field of electrochemical energy storage.     

Aqueous Manganese Dioxide Ink for Paper‐Based Capacitive Energy Storage Devices

We report a simple approach based on a chemical reduction method to synthesize aqueous inorganic ink comprised of hexagonal MnO₂ nanosheets. The MnO₂ ink exhibits long‐term stability and continuous thin films can be formed on various substrates without using any binder. To obtain a flexible electrode for capacitive energy storage, the MnO₂ ink was printed onto commercially available A4 paper pretreated with multiwalled carbon nanotubes. The electrode exhibited a maximum specific capacitance of 1035 F g^?1 (91.7 mF cm^?2). Paper‐based symmetric and asymmetric capacitors were assembled, which gave a maximum specific energy density of 25.3 Wh kg^?1 and a power density of 81 kW kg^?1. The device could maintain a 98.9 % capacitance retention over 10 000 cycles at 4 A g^?1. The MnO₂ ink could be a versatile candidate for large‐scale production of flexible and printable electronic devices for energy storage and conversion.     

Electrospun porous MnMoO<Subscript>4</Subscript> nanotubes as high-performance electrodes for asymmetric supercapacitors

MnMoO₄ nanotubes of diameter about 120 nm were successfully synthesized by a single-spinneret electrospinning technique followed by calcination in air, and their structural, morphological, and electrochemical properties were studied with the aim to fabricate high-performance supercapacitor devices. The obtained MnMoO₄ nanotubes display a 1D architecture with a porous structure and hollow interiors. Benefiting from intriguing structural features, the unique MnMoO₄ nanotube electrodes exhibit a high specific capacitance, excellent rate capability, and cycling stability. As an example, the tube-like MnMoO₄ delivers a specific capacitance of 620 F g^?1 at a current density of 1 A g^?1, and 460 F g^?1 even at a very high current density of 60 A g^?1. Remarkably, almost no decay in specific capacitance is found after continuous charge/discharge cycling for 10,000 cycles at 1 A g^?1. An asymmetric supercapacitor fabricated from this MnMoO₄ nanotubes and activated carbon displayed a maximum high energy density of 31.7 Wh kg^?1 and a power density of 797 W kg^?1, demonstrating a good prospect for practical applications in energy storage electronics.     

A Facile Strategy for the Preparation of MoS3 and its Application as a Negative Electrode for Supercapacitors

Owing to their graphene‐like structure and available oxidation valence states, transition metal sulfides are promising candidates for supercapacitors. Herein, we report the application of MoS₃ as a new negative electrode for supercapacitors. MoS₃ was fabricated by the facile thermal decomposition of a (NH₄)₂MoS₄ precursor. For comparison, samples of MoS₃&MoS₂ and MoS₂ were also synthesized by using the same method. Moreover, this is the first report of the application of MoS₃ as a negative electrode for supercapacitors. MoS₃ displayed a high specific capacitance of 455.6 F g^?1 at a current density of 0.5 A g^?1. The capacitance retention of the MoS₃ electrode was 92 % after 1500 cycles, and even 71 % after 5000 cycles. In addition, an asymmetric supercapacitor assembly of MoS₃ as the negative electrode demonstrated a high energy density at a high potential of 2.0 V in aqueous electrolyte. These notable results show that MoS₃ has significant potential in energy‐storage devices.