Capillary Electrophoresis Separation Techniques and Mechanisms in Dilute Polymer Matrices

Capillary electrophoresis in ultradilute derivatized solutions is used to separate nucleic acid fragment mixtures. Pulsed field techniques are used to improve resolution. Protocols in which pulse parameters are varied during the course of the separation are used to increase the range of fragment sizes separated. Fluorescence microscopy is used to study the separation mechanism in ultradilute solution.     

Electrochemical Detection of Artemisinin Using Cobalt Sulphide/Reduced Graphene Oxide Nanocomposite

Solvothermally synthesized cobalt sulphide/reduced graphene oxide (CoS/rGO) was used to fabricate an electrochemical sensor for detection of artemisinin. Microscopic techniques were used to characterize CoS/rGO nanocomposite. The electrochemical sensor was fabricated by modifying the surface of glassy carbon electrode with CoS/rGO nanocomposite. [Fe(CN)6]^3−/4− was used as a mediator to aid oxidation of artemisinin. Differential pulse voltammetric technique was used for the detection of artemisinin. A linear range of 30–100 μM was used. Experimentally, a detection limit of 0.5 μM was obtained. Therefore, the developed sensor can be used for quality control of artemisinin.     

On the Coloring Reaction of Dibromomethyl Carboxyazo with Iron

The reagents of unsymmetrical carboxyazo group as coloring agents are often used in the spectrophotometric determination of calcium, barium and aluminum, but rarely used in that of iron. Dibromomethyl carboxyazo is a new coloring agent, and can be used in the determination of barium. It is not found that the agent is used in that of other elements.     

A new titrant for perchlorate: Cetyltrimethylammonium bromide

Cetyltrimethylammonium bromide is used in the precipitation titration of perchlorate, with potentiometric end-point detection. A perchlorate, fluoroborate or nitrate ion-selective electrode may be used. The method is more sensitive than the commonly used titration with tetraphenylarsonium chloride. It can be used over the pH range from 1.20 to at least 12.8. The titrant is much cheaper than tetraphenylarsonium chloride.     

衍生化-离子阱气相色谱质谱联用检测乳粉中三聚氰胺时不同质谱检测方法研究

利用N,O-双三甲基硅基三氟乙酰胺(BSTFA)和三甲基氯硅烷(TMCS)衍生化试剂对乳粉中三聚氰胺进行衍生化处理,利用离子阱气相色谱质谱联用仪,建立了全扫描、选择离子监测、二级质谱3种测定三聚氰胺的质谱方法.选择离子监测以三聚氰胺衍生物的特征离子m/z342,327,171,99为定性离子,以m/z327为定量离子;全扫描法二级质谱特征峰为定性依据,以特征离子m/z327为定量离子;二级质谱法以衍生物二级质谱m/z285,171,213为定性离子,以m/z 285为定量离子.3种方法的线性范围为0.05～2.0 mg/L,线性相关系数分别为0.9986、0.9990、0.9988;检测限分别为0.005、0.002、0.003 mg/kg,RSD分别为6.3%、5.7%、6.1%(n=6),方法的回收率为84%～105%.3种不同质谱检测方法应用到乳粉的检测中效果良好,均能够满足乳粉中三聚氰胺的检测要求.     

Construction of Multi‐Substituted Benzenes via NHC‐Catalyzed Reactions of Carboxylic Esters

A carbene‐catalyzed ester activation reaction for the synthesis of multi‐substituted benzenes is developed. Tetra‐substituted benzene compounds are efficiently synthesized through this methodology. Compared with aldehyde substrates used in previous reports, the ester substrates used here are much more readily available and inexpensive. In addition, the TEMPO oxidant used here is more inexpensive than the quinones commonly used in related carbene‐catalyzed reactions.     

Exact solutions of lattice polymer models

We consider directed path models of a selection of polymer and vesicle problems. Each model is used to illustrate an important method of solving lattice path enumeration problems. In particular, the Temperley method is used for the polymer collapse problem. The ZL method is used to solve the semi-continuous vesicle model. The Constant Term method is used to solve a set of partial difference equations for the polymer adsorption problem. The Kernel method is used to solve the functional equation that arises in the polymer force problem. Finally, the Transfer Matrix method is used to solve a problem in colloid dispersions. All these methods are combinatorially similar as they all construct equations by considering the action of adding an additional column to the set of objects.     

用毛细管色谱柱分离有机磷农药

本文介绍了用SE-30毛细管柱、高速率程序升温分离13种有机磷农药。其分离效果较好,分析速度较快,有良好的线性关系和重复性。     

Electrochemical determination of hesperidin using mesoporous SiO2 modified electrode

A simple micro-capillary electrophoresis system to be used as disposable device was developed. A short commercial capillary was used as the separation channel, hydrostatic pressure generated by the sample employed for injection, and a voltage of 200 V used for separation in a 6 cm long capillary assisted by hydrostatic pressure of the carrier. The device was used for the separation of dopamine and catechol. Good reproducibility and efficiency was obtained. Because the instrumentation and operation conditions were simplified, and a replaceable modular separation channel was used, the proposed micro-capillary electrophoresis system is potentially useful in disposable devices.     

Gas-phase optrode measurements of oxygen in calorimetric vessels

Simultaneous measurements of oxygen and heat rates are useful for the determination of thermodynamics and kinetics of metabolic and chemical reactions involving oxygen. Optrodes have not previously been used to measure oxygen inside calorimetric vessels. The optrode used in this study produces <2 μW and can be used to make measurements in both gaseous and aqueous systems. An external syringe injection of air was used to calibrate the optrode, and zinc–air batteries were used to evaluate the system. Data on maple leaf buds were collected to demonstrate application to respiration measurements.     

Photosensitized degradation of organic pollutants in water: processes and analytical applications

Photosensitized degradation has been used to remove a broad range of organic pollutants, generally with mineralization to CO₂ and other inorganic products such as Cl⁻ and . TiO₂ and Fe³⁺ are the photosensitizers mainly used to accelerate the degradation of persistent organic chemicals. Various analytical techniques were used to identify the degradation products and to monitor the degradation kinetics. Chromatographic techniques such as high-performance liquid chromatography (HPLC), gas chromatography (GC) and ion-exchange were used. Other analytical techniques, such as total organic carbon analysis, UV–visible spectrophotometry, spectrofluorimetry, and potentiometry, were also used. When the photodegradation is carried out in water, extraction methods such liquid–liquid extraction or solid-phase extraction need to be used, followed by GC or HPLC analysis. We review the analytical methods used for the identification of the products formed in photodegradation studies. Kinetic studies of the degradation are also reported.     

金纳米粒子组装体系中偶联单分子层膜结构的SERS光谱表征与分析

通过分子自组装方法制备4,4′-二硫联吡啶(PySSPy)单分子膜修饰的金电极. 利用所形成的对巯基吡啶自组装单分子膜(SAMs)作为偶联层进行金纳米粒子有序膜的组装. 对该纳米粒子组装体系进行Raman光谱测定, 得到了具有良好信噪比的对巯基吡啶单分子膜的表面增强拉曼散射(SERS)光谱. 在此基础上, 进一步采用电化学现场SERS光谱技术研究了该纳米粒子组装体系的SERS光谱随电位变化的规律. 在该体系稳定的电位范围内表征对巯基吡啶单分子膜的特征谱峰1011与1093 cm^-1、1575与1610 cm^-1以及1206与1215 cm^-1这三对谱峰其强度随着所施加电位的改变呈现出明显的规律性. 分析表明, 偶联单分子层中吡啶环芳香性随着所施加电位的改变而有规律地变化是SERS光谱特征改变的内在原因.     

汽车排放污染物的共振增强多光子电离光谱分析

汽车排放的主要污染物为CO,HC,NOx(x=1,2）,SO2,Pb,苯丙芘,固体颗粒等[1],其尾气的检测对维护人类自身健康具有十分重要的意义．共振增强多光子电离光谱（Resonant Enhanced Multi-Photonionization,REMPI）是一种超灵敏光谱检测技术,它的灵敏度比LIF（Laser InducedFluorescence）还要高．1979年,Brophy和Rentttner[2]提出了REMPI可以作为检测大气污染的方法．后来,不同的研究小组采用了不同的REMPI方案对大气污染类分子进行了测量研究［3-6]．由于采用可调谐染料激光器为光源,可以使用同一种染料对几种具有相近特征波长的分子进行同时测定．本文报     

Thermochemical and physical properties of printed circuit board laminates and other polymers used in the electronics industry

Theories behind four thermal analysis techniques are reviewed, and relevant case studies are used to illustrate the application of these techniques to measure; various parameters relevant to printed circuit board laminates and engineering polymers.Thermogravimetric analysis (TGA) is used to determine the filler content of polymers and composites and when combined with Fourier transform infrared (FTIR) spectroscopy can be used for the chemical analysis of evolved gases.Differential scanning calorimetry (DSC) is used to measure the melting point of polymers and the degree of cure of prepregs, laminates and adhesives.Thermomechanical analysis (TMA) is used to measure the coefficient of thermal expansion (CTE) and the glass transition temperature (Tg) of laminates, and dynamic mechanical analysis (DMA) is used to measure the storage modulus, loss; modulus and Tan δ of polymers.     

SCR脱硝催化剂失活及其原因研究

以运行后的蜂窝型SCR（Selective catalytic reduction）催化剂和新鲜催化剂为研究对象。应用红外光谱、氮气吸脱附、X射线衍射、电镜扫描等手段对新鲜催化剂及运行后催化剂进行表征。结果表明,运行后催化剂表面官能团发生了变化,比表面积严重降低,载体（TiO₂）产生了型变,并且催化剂表面微粒出现了团聚现象。对运行后催化剂活性降低的原因进行了研究,结果表明,脱硝催化剂在运行过程中遭遇了突发性高温(如t> 650℃),导致活性出现劣化。此外,催化剂表面沉积物中水溶性离子及砷、磷等物质也对催化活性产生了影响。     

Evaluating changes of writhe in computer simulations of supercoiled DNA

We compute changes in the writhe of a polygonal space curve when one of the vertices is displaced. The resulting expressions can be used in simulations of supercoiled DNA. For Brownian dynamics simulations, the expressions can be used to eliminate the explicit twisting degree of freedom. For Monte Carlo simulations, they can be used in fast local moves. Preliminary Monte Carlo simulations using only such fast local moves show that these can be used to efficiently simulate small DNA supercoils.     

Elemental analysis of alloys by XRF

XRF was used for routine analysis of different kinds of alloys, such as archeological findings, materials used in dentistry, and Al alloyed with Ga used in industry. The results of these analyses are described in this paper.     

Metabolism of cheese whey lactose by kluyveromyces fragilis for energy and growth under batch condition

The fermentation of lactose byKluyveromyces fragilis is an exothermic reaction in which heat is released, resulting in a rise in reactor temperature. A heat balance was performed on a 5-L batch reactor used for single cell protein (SCP) production to determine the portions of cheese whey lactose used for energy and growth. On the average, about 88% of lactose was used for growth, and 12% was used for energy. The lactose consumed during the lag and stationary phases was used mostly for cell endogenous growth and respiration, whereas that consumed during the exponential growth phase was used for cell multiplication and energy. The heat released varied from 6.5 to 8.9 kJ/g cell. Because of the proper design of the fermenter, the temperature of the medium did not rise above 33°C; thus, no cooling system was needed.     

Grid‐based algorithm to search critical points,in the electron density,accelerated by graphics processing units

Using a grid‐based method to search the critical points in electron density, we show how to accelerate such a method with graphics processing units (GPUs). When the GPU implementation is contrasted with that used on central processing units (CPUs), we found a large difference between the time elapsed by both implementations: the smallest time is observed when GPUs are used. We tested two GPUs, one related with video games and other used for high‐performance computing (HPC). By the side of the CPUs, two processors were tested, one used in common personal computers and other used for HPC, both of last generation. Although our parallel algorithm scales quite well on CPUs, the same implementation on GPUs runs around 10× faster than 16 CPUs, with any of the tested GPUs and CPUs. We have found what one GPU dedicated for video games can be used without any problem for our application, delivering a remarkable performance, in fact; this GPU competes against one HPC GPU, in particular when single‐precision is used. © 2014 Wiley Periodicals, Inc.