Infrared and Raman spectra, conformational stability, ab initio calculations and vibrational assignment of 2-fluorobutane

The infrared spectra (3500-50 cm-1) of gas and solid and the Raman spectrum (3500-50 cm-1) of liquid 2-fluorobutane, CH3CHFCH2CH3, have been recorded. Variable temperature studies over the range -105 to -150 degrees C of the infrared spectra (3500-400 cm-1) of the sample dissolved in liquid krypton have also been recorded. By utilizing the relative intensities of six conformer pairs each for both Me-trans/F-trans and Me-trans/H-trans, the Me-trans conformer is found to be the lowest energy form with an enthalpy difference to the F-trans conformer of 102 +/- 10 cm-1 ( 1.21+/- 0.12 kJmol-1) whereas the H-trans conformer is the highest energy form with an enthalpy difference of 208 +/- 21 cm-1 ( 2.49 +/- 0.25 kJmol-1) higher than the Me-trans form. At ambient temperature, it is estimated that there is 50 +/- 2% of the Me-trans form, 31 +/- 1% of the F-trans form, and 19 +/- 1% of the H-trans conformer present. Equilibrium geometries and total energies of the three conformers have been determined by ab initio calculations with full electron correlation by the perturbation method to second order using a number of basis sets. A complete vibrational assignment is proposed for the Me-trans conformer and many of the fundamentals have been identified for the other two forms based on the force constants, relative infrared and Raman intensities, and depolarization ratios obtained from MP2/6-31Gd ab initio calculations. The spectroscopic and theoretical results are compared to the corresponding properties for some similar molecules.     

Conformational stability from variable temperature infrared spectra of krypton solutions, ab initio calculations, vibrational assignment, and r0 structural parameters of 1,3-difluoropropane

The infrared spectra (3200-400 cm(-1)) of krypton solutions of 1,3-difluoropropane, FCH2CH2CH2F, at variable temperatures (-105 to -150 degrees C) have been recorded. Additionally, the infrared spectra (3200-50 cm(-1)) of the gas and solid have been recorded as well as the Raman spectrum of the liquid. From a comparison of the spectra of the fluid phases with that in the solid, all of the fundamental vibrations of the C2 conformer (gauche-gauche) where the first gauche indicates the form for one of the CH2F groups and the second gauche the other CH2F, and many of those for the C1 form (trans-gauche) have been identified. Tentative assignments have been made for a few of the fundamentals of the other two conformers, i.e. C2v (trans-trans) and Cs (gauche-gauche'). By utilizing six pairs of fundamentals for these two conformers in the krypton solutions, an enthalpy difference of 277 +/- 28 cm(-1) (3.31 +/- 0.33 kJ mol(-1)) has been obtained for the C2 versus C1 conformer with the C2 conformer the more stable form. For the C2v conformer, the enthalpy difference has been determined to be 716 +/- 72 cm(-1) (8.57 +/- 0.86 kJ mol(-1)) and for the Cs form 971 +/- 115 cm(-1) (11.6 +/- 1.4 kJ mol(-1)). It is estimated that there is 64 +/- 3% of the C2 form, 34 +/-3% of the C1 form, 1% of the C2v form and 0.6% of the Cs conformer present at ambient temperature. Equilibrium geometries and total energies of the four stable conformers have been determined from ab initio calculations with full electron correlation by the perturbation method to second order as well as by hybrid density functional theory calculations with the B3LYP method using a number of basis sets. The MP2 calculations predict the C1 conformer stability to be slightly higher than the experimentally determined value whereas for the C2v and Cs conformers the predicted energy difference is much larger than the experimental value. The B3LYP calculations predict a better energy difference for both the C1 and C2v as well as for the Cs conformers than the MP2 values. A complete vibrational assignment is proposed for the C2 conformer and many of the fundamentals have been identified for the C1 form based on the force constants, relative intensities and rotational-vibrational band contours obtained from the predicted equilibrium geometry parameters. By combining previously reported rotational constants for the C2 and C1 conformers with ab initio MP2/6-311 + G(d, p) predicted parameters, adjusted r0 parameters have been obtained for both conformers. Comparisons are made with the parameters obtained for some other molecules containing the FCH2 group. The spectroscopic and theoretical results are compared to the corresponding properties for some similar molecules.     

Synthesis and structural, electrochemical, and stacking properties of conical molecules possessing buckyferrocene on the apex

A series of conical molecules featuring a [60]fullerene/ferrocene hybrid and five aralkyl side chains (Fe[C60{C6H4-(OCO-C6H3-(OR)2-3,4)-4}5]Cp) have been synthesized and examined for their structural and electrochemical properties as well as their ability to form supramolecular structures in crystals and liquid crystals. When the R group on the side is a methyl group, the compound forms crystals in which the dipolar conical molecules are stacked head-to-tail to form a columnar structure. When the R group is as long as a C18H38 group, the compound forms liquid crystals. Oxidation of the liquid crystalline compound by an aminium salt [(4-BrC6H4)3N][SbCl6] produces the corresponding paramagnetic Fe(III) compound that also exhibits liquid crystalline properties.     

Infrared and Raman spectra, conformational stability, ab initio calculations of structure, and vibrational assignment of ethynylmethyl cyclobutane.

The infrared spectra (3200-300 cm(-1)) of the gas and solid and the Raman spectra (3200-30 cm(-1) of the liquid with quantitative depolarization values and the solid have been recorded of ethynylmethyl cyclobutane (cyclobutylmethyl acetylene), c-C4H7CH2C[ triple bond]CH. Both the equatorial and the axial conformers have been identified in the fluid phases and both the gauche and trans conformations of the methyl acetylenic group have been identified for each ring conformer. Variable temperature (-105 to -150 degrees C) studies of the infrared spectra of the sample dissolved in liquid krypton have been carried out. From these data the enthalpy differences have been determined to the 112 +/- 11 cm(-1) (1.34 +/- 0.13 kJ mol) between the most stable equatorial-trans (Et) conformer and the equatorial-gauche (Eg) conformer which is the second most stable conformer and 327 +/- 35 cm(-1) (3.91 + 0.42 kJ/mol) with the axial-gauche (Ag) conformer which is the least stable conformer. The enthalpy difference between the axial-trans (At) and the equatorial-gauche(Eg) is 56 +/- 6 cm(-1). At ambient temperature there is approximately 33% of the Et conformer, 38% of the Eg form, 15% of the At and 14% of the Ag conformer. For the polycrystalline solid the Eg conformer is the only form present which probably results form the packing in the crystal. A complete vibrational assignment is proposed for both equatorial conformers and additionally a few of the fundamentals of the At and Ag conformers have been assigned. The vibrational assignments are supported by normal coordinate calculations utilizing the force constants from ab initio MP2/6-31G(d) calculations. Complete equilibrium geometries have been determined for all four possible rotamers by ab initio calculations employing the 6-31G(d) and 6-311 + + G(d,p) basis sets at levels of restricted Hartree-Fock (RHF) and /or Moller-Plesset (MP2) with full electron correlation by the perturbation method to second order. The results are discussed and compared to those obtained for some similar molecules.     

Kinetics and mechanisms of the reactions of hypochlorous acid,chlorine, and chlorine monoxide with bromite ion

The reaction between BrO2(-) and excess HOCl (p[H+] 6-7, 25.0 degrees C) proceeds through several pathways. The primary path is a multistep oxidation of HOCl by BrO(2)(-) to form ClO(3)(-) and HOBr (85% of the initial 0.15 mM BrO(2)(-)). Another pathway produces ClO(2) and HOBr (8%), and a third pathway produces BrO(3)(-) and Cl(-) (7%). With excess HOCl concentrations, Cl(2)O also is a reactive species. In the proposed mechanism, HOCl and Cl(2)O react with BrO(2)(-) to form steady-state species, HOClOBrO(-) and ClOClOBrO(-). Acid facilitates the conversion of HOClOBrO(-) and ClOClOBrO(-) to HOBrOClO(-). These reactions require a chainlike connectivity of the intermediates with alternating halogen-oxygen bonding (i.e. HOBrOClO(-)) as opposed to Y-shaped intermediates with a direct halogen-halogen bond (i.e. HOBrCl(O)O(-)). The HOBrOClO(-) species dissociates into HOBr and ClO(2)(-) or reacts with general acids to form BrOClO. The distribution of products suggests that BrOClO exists as a BrOClO.HOCl adduct in the presence of excess HOCl. The primary products, ClO(3)(-) and HOBr, are formed from the hydrolysis of BrOClO.HOCl. A minor hydrolysis path for BrOClO.HOCl gives BrO(3)(-) and Cl(-). An induction period in the formation of ClO(2) is observed due to the buildup of ClO(2)(-), which reacts with BrOClO.HOCl to give 2 ClO(2) and Br(-). Second-order rate constants for the reactions of HOCl and Cl(2)O with BrO(2)(-) are k(1)(HOCl) = 1.6 x 10(2) M(-1) s(-1) and k(1)(Cl)()2(O) = 1.8 x 10(5) M(-)(1) s(-)(1). When Cl(-) is added in large excess, a Cl(2) pathway exists in competition with the HOCl and Cl(2)O pathways for the loss of BrO(2)(-). The proposed Cl(2) pathway proceeds by Cl(+) transfer to form a steady-state ClOBrO species with a rate constant of k(1)(Cl2) = 8.7 x 10(5) M(-1) s(-1).     

Chemistry of Iminofuran: XVI. Synthesis,Structure, Biological Activity,and Cyclization of 4-Oxo-2-(2-phenylaminobenzoylhydrazono)butanoic Acids

The reaction of (2-phenylaminobenzoyl)hydrazine with 4-aryl-2-hydroxy-4-oxobut-2-enoic and 2-hydroxy-5,5-dimethyl-4-oxohex-2-enoic acids results in the formation of 4-aryl-2-(2-phenylaminobenzoyl-hydrazono)-4-oxobutanoic and 5,5-dimethyl-2-(2-phenylaminobenzoylhydrazono)-4-oxohexanoic acids. The products in solutions are present as mixtures of a Z,E-hydrazono form and a cyclic pyrazolinic form, and under the action of acetic anhydride they cyclize in 5-aryl- and 5-tert-butyl-3-(2-phenylaminobenzoylhydrazono)-furan-2,3-diones. 4-Aryl-2-(2-phenylaminobenzoylhydrazono)-4-oxobutanoic and 5,5-dimethyl-2-(2-phenyl-aminobenzoylhydrazono)-4-oxohexanoic acids were tested for antinociceptive and anti-inflammatory activity.

     

Novel Trinor-eremophilanes (Dendryphiellin B,C, and D), Eremophilanes (Dendryphiellin E,F, and G), and Branched C9-Carboxylic Acids (Dendryphiellic Acid A and B) from the Marine Deuteromycete Dendryphiella salina (SUTHERLAND) PUGHet NICOT

Further investigation of global extracts from cultures of the marine deuteromycete Dendryphiella salina leads to the isolation of three novel trinor-eremophilanes esterified by branched C₉-carboxylic acids, dendryphiellin B (= (+)-(1R*,2S*,7R*,8aR*)-1,2,6,7,8,8a-hexahydro-7-hydroxy-1,8a-dimethyl-6-oxonaphthalen-2-yl (6R*, 2E, 4E)-6-hydroxy-6-methylocta-2,4-dienoate; (+)- 2 ), dendryphiellin C (=(+)-(1R*, 2S*, 7R*, 8aR*)-1,2,6,7,8,8a-hexa-hydro-7-hydroxy-1,8a-dimethyl-6-oxonaphthalen-2-yl (6S, 2E, 4E)-6-methylocta-2,4-dienoate; (+)- 3 )), and dendryphiellin D (=(+)-(1R*, 2S*, 7R*, 8aR*)-1,2,6,7(8,8a-hexahydro-7-hydroxy-1,8a-dimethyl-6-oxonaphthalen-2-yl (6R*,2E,4E)-6-(hydroxymethyl)octa-2,4-dienoate; (+)- 4 ). An intact eremophilane, dendryphiellin E ( 5 ), and its ethanolysis product dendryphiellin F whose absolute configuration is represented by structural formula (+)- 6 are also isolated from the above extracts. Dendryphiellin E exists as an open form 5a in equilibrium with a closed form 5b . A similar equilibrium exists between the open form 8a and the closed form 8b of a non-esterified eremophilane, dendryphiellin G ( 8 ), which is isolated too from the above extracts and proves structurally related to the cyclic portion of 5 . Finally, the free, branched C₉-carboxylic acids dendryphiellic acid A ((+)- 9 ) and B ((+)- 10 ) which correspond to side chains of the above esterified terpenes are also isolated from the above extracts.     

Simultaneous determination of phenylephrine hydrochloride, guaifenesin, and chlorpheniramine maleate in cough syrup by gradient liquid chromatography

A simple and reliable high-performance liquid chromatographic method was developed for the simultaneous determination of mixture of phenylephrine hydrochloride (PHENYL), guaifenesin (GUAIF), and chlorpheniramine maleate (CHLO) either in pure form or in the presence of methylparaben and propylparaben in a commercial cough syrup dosage form. Separation was achieved on a C8 column using 0.005 M heptane sulfonic acid sodium salt (pH 3.4 +/- 0.1) and acetonitrile as a mobile phase by gradient elution at different flow rates, and detection was done spectrophotometrically at 210 nm. A linear relationship in the range of 30-180, 120-1800, and 10-60 microg/mL was obtained for PHENYL, GUAIF, and CHLO, respectively. The results were statistically analyzed and compared with those obtained by applying the British Pharmacopoeia (2002) method and showed that the proposed method is precise, accurate, and can be easily applied for the determination of the drugs under investigation in pure form and in cough syrup formulations.     

Alkyne and reversible nitrile activation: N,N'-diamidocarbene-facilitated synthesis of cyclopropenes, cyclopropenones, and azirines

We report the synthesis of a variety of diamidocyclopropenes by combining an isolable and readily accessible N,N'-diamidocarbene (DAC) with a range of alkynes (nine examples, 68-97% yield). Subsequent hydrolysis of selected cyclopropenes afforded the corresponding cyclopropenones or α,β-unsaturated acids, depending on the reaction conditions. In addition, the combination of a DAC with alkyl or aryl nitriles was found to form 2H-azirines in a reversible manner (four examples, K(eq) = 4-72 M(-1) at 30 °C in toluene).     

A catalytic multicomponent protocol to dihydropyridine-3-carboxylate from terminal alkynes,isocyanates, and malonates

Monatshefte für Chemie - Chemical Monthly - A domino catalytic reaction between terminal alkynes, isocyanates, and malonates has been developed. Copper acetylides attack on isocyanates to form...     

Conformational, concomitant polymorphs of 4,4-diphenyl-2,5-cyclohexadienone: conformation and lattice energy compensation in the kinetic and thermodynamic forms

4,4-Diphenyl-2,5-cyclohexadienone (1) crystallized as four conformational polymorphs and a record number of 19 crystallographically independent molecules have been characterized by low-temperature X-ray diffraction: form A (P2(1), Z'=1), form B (P1, Z'=4), form C (P1, Z'=12), and form D (Pbca, Z'=2). We have now confirmed by variable-temperature powder X-ray diffraction that form A is the thermodynamic polymorph and B is the kinetic form of the enantiotropic system A-D. Differences in the packing of the molecules in these polymorphs result from different acidic C-H donors approaching the C=O acceptor in C-H...O chains and in synthons I-III, depending on the molecular conformation. The strength of the C-HO interaction in a particular structure correlates with the number of symmetry-independent conformations (Z') in that polymorph, that is, a short C-HO interaction leads to a high Z' value. Molecular conformation (Econf) and lattice energy (Ulatt) contributions compensate each other in crystal structures A, B, and D resulting in very similar total energies: Etotal of the stable form A=1.22 kcal mol(-1), the metastable form B=1.49 kcal mol(-1), and form D=1.98 kcal mol(-1). Disappeared polymorph C is postulated as a high-Z', high-energy precursor of kinetic form B. Thermodynamic form A matches with the third lowest energy frame based on the value of Ulatt determined in the crystal structure prediction (Cerius2, COMPASS) by full-body minimization. Re-ranking the calculated frames on consideration of both Econf (Spartan 04) and Ulatt energies gives a perfect match of frame #1 with stable structure A. Diphenylquinone 1 is an experimental benchmark used to validate accurate crystal structure energies of the kinetic and thermodynamic polymorphs separated by <0.3 kcal mol(-1) (approximately 1.3 kJ mol(-1)).     

Selective synthesis of hydrazinium diselenophosphinates from secondary phosphines,elementary selenium,and hydrazine

A three-component reaction of secondary phosphines, elementary selenium, and hydra zine hydrate (the molar ratio 1: 2: 1.1) selectively proceeds under mild conditions (EtOH, 70-75°C, 0.5 h) to form earlier unknown hydrazinium diselenophosphinates (81-95%).     

Technetium fluoride trioxide, TcO3F, preparation and properties

TcO4- in HF solution reacts to form Tc3O9F4- along with some TcO3F. Pure TcO3F is obtained if a mixture of HF/BiF5 is applied. TcO3F dimerizes in the solid state via fluoride bridges, similar to the structures of CrO2F2 and VOF3. TcO3F reacts in HF with AsF5 or SbF5 under formation of TcO2F2+As(Sb)F6-.     

Two-sided,flexible, durable,highly transparent and hazy plastic-paper for green optoelectronics

Cellulose - We combine biodegradable plastic (polyvinyl alcohol/glycerol polymer), and cellulose-based tissue paper in a very short time (5&nbsp;s) by a facile way to form a new matrix, named...     

Design,synthesis, resolution,and stereochemical assignment of a conformationally rigid chiral ligand derived from anthracene and a dienophile containing a pyridine moiety

The conformationally rigid chiral ligand, trans-12-(pyridin-2-yl)-9,10-dihydro-9,10-ethanoanthracene-11-carboxylic acid ethyl ester, 1, was designed and synthesized in racemic form. Both isomers were successfully obtained in enantiomerically pure form through classical resolution using l-(+)-tartaric acid in acetonitrile. The nature of the diastereomeric complex formed in this resolution was elucidated using single crystal X-ray crystallographic studies. The absolute configuration of (+)-1 was unambiguously assigned as (11S,12S) by single crystal structural analysis of salt 5 formed from (+)-1 and l-(+)-tartaric acid.     

Spectra and structure of silicon-containing compounds. Part XXXVIII: Infrared and Raman spectra,vibrational assignment,conformational stability,and ab initio calculations of vinyldifluorosilane

Infrared spectra (3500-50 cm(-1)) of gaseous and solid, and Raman spectrum (3500-30 cm(-1)) of liquid vinyldifluorosilane, CH(2)z.dbnd6;CHSiF(2)H, are reported. Both the cis and gauche rotamers have been identified in the fluid phases. From temperature-dependent FT-infrared spectra of krypton solutions, it is shown that the cis conformer is more stable than the gauche form by 119+/-12 cm(-1) (1.42+/-0.14 kJ mol(-1)). At ambient temperature there is 53+/-2% of the gauche conformer present. Complete vibrational assignments are provided for the cis conformer and several modes are identified for the gauche form. Harmonic force constants, fundamental frequencies, infrared intensities, and Raman activities have been obtained from MP2/6-31G(d) calculations with full electron correlation. The optimized geometries and conformational stabilities have also been obtained from ab initio MP2/6-31G(d), MP2/6-311+G(d,p), and MP2/6-311+G(2d,2p) calculations with full electron correlation as well as from density functional theory calculations (DFT) by the B3LYP method. The SiH bond distances (r(0)) of 1.472 and 1.471 A have been obtained for the cis and gauche conformers, respectively, from the silicon-hydrogen stretching frequencies. These results are compared to the corresponding quantities of the corresponding carbon analogue as well as with some similar molecules.     

Electroreduction of aromatic oximes: diprotonation, adsorption, imine formation, and substituent effects

Aromatic oximes are reduced in aqueous solution in a four-electron process. The reducible species in the pH range 5-8 is a diprotonated form of the oxime. This species is generated in the course of electrolysis in the vicinity of the electrode surface from the adsorbed neutral form of the oxime. The reduction is initiated by a cleavage of the N-O bond. The diprotonation facilitates the reduction process by the preformation of OH2+ as a good leaving group and by a positive charge on the azomethine nitrogen. Diprotonation has been proven based on shapes of i = f(pH) plots, by observed shifts of half-wave potentials with pH and by comparison with the reduction of nitrones. Some observed deviations from theoretical i = f(pH) plots were attributed to the role of adsorption on the rate of protonation. Adsorption is also responsible for dips on some of the i-E curves. Adsorption plays a role at concentrations as low as 1 x 10(-5) M, when the electrode surface is still not fully covered. This indicates that catalyzed protonation occurs on islets of adsorbed materials. At pH 2-5 the studied oximes in the vicinity of the electrode are predominately present in a protonated form, which is less strongly adsorbed. In this pH range the protonation takes place in a homogeneous reaction layer of the electrode. It yields a monoprotonated form, which is reduced. The separation of two two-electron waves observed for some oximes in acidic media serves as an experimental proof of the formation of imines as reduction intermediates. This separation is caused by the differences in pKa values of protonated forms of oximes and imines. The effects of substituents in the para position on the benzene ring are characterized by correlation with the Hammett substituent constant sigmax. This has been proven at pH 1.5 for substituted benzaldehyde oximes and at pH 5.0 for substituted acetophenone oximes.     

Biosynthesis of violacein: a genuine intermediate, protoviolaceinic acid, produced by VioABDE, and insight into VioC function

A biosynthetic intermediate of violacein produced by the mixed enzymes of VioABDE was elucidated to be 5-(5-hydroxy-1H-indol-3-yl)-3-(1H-indol-3-yl)-1H-pyrrole-2-carboxylic acid, named protoviolaceinic acid, indicating that VioC, responsible for the final biosynthetic step, works to oxygenate at the 2-position of the right side indole ring, and that the oxygenation reaction to form the central pyrrolidone core proceeds in a non-enzymatic fashion.     

Synthesis and characterization of liquid crystals containing a non-activated 1' ,3' ,3'-trimethylspiro\[2H-1-benzopyran-2,2-indoline] group

Two series of mesogens derived from the non-activated spiropyran dyes 6-hydroxy-1 ,3 ,3- trimethylspiro\[2H -1-benzopyran-2,2-indoline] (series trimethylspiro\[2 H -1-benzopyran-2,2-indoline] (series 2 ) have been synthesized. Analysis by differential scanning calorimetry, polarizing microscopy and X-ray diffraction showed compounds in series 1 form monotropic nematic and SmA phases, while compounds in series 2 form only a monotropic nematic phase.     

Oxasmaragdyrin-ferrocene and oxacorrole-ferrocene conjugates: synthesis, structure, and nonlinear optical properties

Ferrocenyl macrocyclic conjugates involving 22 pi oxasmaragdyrins and 18 pi oxacorroles have been synthesized and characterized. The direct covalent linkage of the ferrocenyl moiety to the meso position of the macrocycle is achieved by simple oxidative coupling of appropriate precursors with trifluoroacetic acid as catalyst. The electronic coupling between the ferrocenyl moiety and the macrocyclic pi system is apparent from: a) the red shifts (293-718 cm(-1)) of the Soret and Q-bands in the electronic absorption spectra of ferrocenyl conjugates; b) the shift of oxidation potentials (50-130 mV) of both the ferrocene and the corrole rings to the positive potentials; and c) considerable shortening of the C-C bond which connects the ferrocene and the meso-carbon atom of the macrocycle. The single-crystal X-ray structure of oxasmaragdyrin-ferrocene conjugate 9 reveals the planarity of the 22 pi skeleton with very small deviations of the meso-carbon atoms. The meso-ferrocenyl substituent has a small dihedral angle of 38 degrees, making way for mixing of the molecular orbitals of the ferrocene and the macrocycle. However, the other two meso substituents are almost perpendicular to the mean plane, defined by the three meso carbon atoms. Classical C-H...O and nonclassical C-H...pi interactions lead to a two-dimensional supramolecular network. Ferrocene-smaragdyrin conjugate 9 bonds to a chloride ion in the protonated form and a rhodium(i) ion in the free base form. Nonlinear optical measurements reveal a larger nonlinear refractive index (-5.83 x 10(-8)cm(2)W(-1)) and figure of merit (2.28 x 10(-8)cm(3)W(-1)) for the rhodium smaragdyrin-ferrocene conjugate 19 than for the others, suggesting its possible application in optical devices.