Heavy-metal extraction capability of chalcogenoic aminophosphines derived from 1-amino-4-methylpiperazine

Aminophosphine of the type (Ph₂PNHR) derived from 1-amino-4-methylpiperazine and its chalcogen derivatives (Ph₂P(X)NHR X = S, Se) were used as ligands in solvent extraction of metal picrates such as Cu²⁺, Ni²⁺, and Pb²⁺ from the aqueous to the organic phase. Influence of parameters such as pH of the aqueous phase, ligand concentration in the organic phase, and concentration of the extractant extracted from the aqueous to the organic phase was investigated to determine the ligands’ ability to extract metal ions. Metal picrate extraction was investigated at 25°C using UV-VIS spectrophotometry in dichloromethane in the absence and in the presence of Ph₂PNHR and chalcogenides. The extraction results revealed that the extraction percentage of Cu²⁺, Ni²⁺, and Pb²⁺ metals was much higher at lower pH values, indicating an acidity dependent complexation equilibrium.     

The synthesis and characterization of 22-membered diazapentathia macrocycles and investigation of their ion extraction capability from aqueous media

Two new macrocyclic ligands, (5) and (6), containing nitrogen–sulfur donor atoms were designed and synthesized in a multi-step reaction sequence. Ion extraction capability of macrocycles (5) and (6) were investigated involving solvent extraction of metal picrates such as Ag⁺, Hg²⁺, Cd²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Mn²⁺, Co²⁺ and Pb²⁺ from aqueous phase to the organic phase. The metal picrate extractions were carried out at 25 ± 0.1 °C and extractions were measured by u.v.–visible spectrometry. The extractability and selectivity of the mentioned metal picrates were evaluated depending on the organic solvents used for extraction. The extraction constant (log K_ex) and the complex composition of each metal complex were determined using spectroscopic methods.     

Ion-pair extraction of transition metal cations from aqueous media using novel N2O2-macrocyclic crown ligands

Three new macrocyclic crown ether ligands containing nitrogen–oxygen donor atoms were designed and synthesized from 1,4-bis(2′-formylphenyl)-1,4-dioxabutane and 4-nitro-o-phenylenediamine. Ion-pair extraction of metal picrates such as Ag⁺, Hg²⁺, Cd²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Mn²⁺, Co²⁺, and Pb²⁺ from aqueous phase to the organic phase was carried out using the novel ligands. The solvent effect over the metal picrate extractions was investigated at 25 ± 0.1 °C by using UV–visible spectrometry. The extractability and the values of the extraction constants (log K_ex) were determined for the extracted complexes.     

Transition Metal Ion-binding Properties of a 14-Membered N2O2S2- Macrobicyclic Ligand

The selective liquid–liquid extraction of various transition metal cations from the aqueous phase to the organic phase was carried out using a 14-membered N₂O₂S₂-macrobicycle. Metal picrates such as Pb²⁺, Co²⁺, Zn²⁺, Ni²⁺,Cu²⁺ and Cd²⁺ were used in this extraction studies. It was found that the ligand showed moderate selectivity towards Pb²⁺ only among the other metals. The extraction constant (log K _ex) was determined to be 13.8 for Pb²⁺ complex.     

New heavy metal ion-selective macrocyclic ligands with mixed-donor atoms and their extractant properties

Synthetic procedures for new macrocyclic diamides with N₂S₄O₃- and N₂S₅O₃-donors were given. The corresponding macrocyclic ligands were prepared by reaction of NaBH₄ with the macrocyclic diamides in the presence of boron triflouride ethyl etherate in dry tetrahydrofuran. The solvent extraction method was used to evaluate metal-ion binding properties of the new ligands. The values of the extraction constants (log K _ex) and the complex compositions were determined for the extracted complexes. The solvent extraction experiments suggested that the reduced N₂S₅O₃-donor macrocycle has Ag⁺ selectivity compared to Pb²⁺, Co²⁺, Ni²⁺, Mn²⁺, and Cd²⁺ for chloroform as organic solvent.     

Synthesis,structure, and solvent-extraction properties of tridentate oxime ligands and their cobalt(II), nickel(II), copper(II), zinc(II) complexes

Synthesis of four different types of ligands Ar[COC(NOH)R] _n (Ar = biphenyl, n = 1, HL¹; Ar = biphenyl, n = 2, H₂L²; Ar = diphenylmethane, n = 1, HL³; Ar = diphenylmethane, n = 2, H₂L⁴; R = furfurylamine in all ligands) and their dinuclear Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ complexes is reported herein. These compounds were characterized by elemental analysis, ICP-OES, FT-IR spectra, and magnetic susceptibility measurements. The ligands were further characterized by ¹H NMR. The results suggest that dinuclear complexes of HL¹ and HL³ have a metal to ligand mole ratio of 2: 2 and dinuclear complexes H₂L² and H₂L⁴ have a metal to ligand mole ratio of 2: 1. Square pyramidal or octahedral structures are proposed for complexes of oxime ligands. Furthermore, extraction abilities of the four ligands were also evaluated in chloroform using selected transition metal picrates such as Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺. The ligands show strong binding ability towards Hg²⁺ and Cu²⁺ ions.     

Spectroscopic and Electrochemical Studies of Transition Metal Complexes with N,N′-Bis(2-aminothiophenol)-1,7-bis(2-formylphenyl)-1,4,7-trioxaheptane and Structure Effects on Extractability of Ligand towards some Divalent Cations

Summary. La(III), Cu(II), Ni(II), and Zn(II) metal complexes with a novel quadridentate Schiff base derived from 1,7-bis(2-formylphenyl)-1,4,7-trioxaheptane and 2-aminothiophenol were synthesized and characterized by microanalytical data, elemental analysis, magnetic measurements, ¹H NMR, ¹³C NMR, UV-Vis, IR, mass spectra, cyclic voltammetric and conductance measurements. The extractability of divalent cations was evaluated as a function of relationship between distribution ratio of the metal and pH or ligand concentration. The highest extraction percentage of Cu²⁺ and Ni²⁺ showed pH 7.0 and 6.4. It was concluded that the ligand can effectively be used in solvent extraction of copper(II) and nickel(II) from the aqueous phase to the organic phase.     

Dansylated Polyamines as Fluorescent Sensors for Metal Ions: Photophysical Properties and Stability of Copper(II) Complexes in Solution

Protonation and the Cu^II complexation constants of the dansylated polyamines N‐dansylethylenediamine ( 1 ), N‐dansyldiethylenetriamine ( 2 ), N‐dansyltriethylenetetramine ( 3 ), N′‐[2‐(dansylamino)ethyl]diethylenetriamine ( 4 ), and tris(2‐dansylaminoethyl)amine ( 5 ) were determined by glass‐electrode potentiometry in MeOH/H₂O 9 : 1 (v/v) solution. For ligands 3 and 4 , the determinations were also performed in aqueous solution. The complexes formed by these ligands in neutral form correspond to those observed for the analogous unsubstituted monoprotonated amines, whereas, when the ligands are deprotonated at the sulfonamide moiety, the species parallel those of the corresponding amines. The molecular structures of the complexes were deduced from the VIS absorption spectra. The crystal structure of the [CuL₂H₋₂] complex 6 of ligand 1 (L) was determined by X‐ray diffraction. The study of the photophysical properties of the ligands 3 – 5 showed that they are good fluorescent sensors for copper(II), which induced fluorescence quenching. Time‐resolved fluorescence measurements allowed us to clarify the sensing mechanism. The pH dependence of the quenching effect demonstrated that it occurs for all Cu²⁺ complexes, even for species in which the sulfonamide moiety is not deprotonated. Sensing of Cu²⁺ was compared with that of other metal ions (Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Hg²⁺), and selectivity was studied as a function of pH. Ligands 3 and 4 were found to be selective chemosensors for Cu²⁺ in weakly acidic solution (pH ca. 4 – 5).     

Synthesis, characterization and liquid–liquid extraction properties of new methoxyaminobiphenylglyoxime derivatives and their complexes with some transition metals

In this study, three new aminobiphenylglyoximes, [L¹H₂] N-(2-methoxy)aminobiphenylglyoxime, [L²H₂] N-(3-methoxy)aminobiphenylglyoxime and L[³H₂] N-(4-methoxy)aminobiphenylglyoxime have been synthesized by the reaction of (E,E)-4′-biphenylchloroglyoxime with 2-Methoxyaniline, 3-Methoxyaniline and 4-Methoxyaniline in absolute ethanol. The preparation Ni^II, Co^II and Cu^II complexes of these ligands are described. The ligands and their complexes were characterized by elemental analyses, IR, mass, H¹ and ¹³C NMR spectra, thermogravimetric analyses (t.g.a) and magnetic susceptibility measurements. Ligands complexing properties were studied by the liquid–liquid extraction of selected alkali (Li⁺, Na⁺, K⁺, Cs⁺) and transition metals (Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺). It has been observed that all ligands show a high affinity to Cu²⁺ ions, whereas almost no affinity to alkali metals. The extraction equilibrium constants (K _ex) for complexes of ligands with Cu²⁺ metal picrates between dichloromethane and water have been determined at 25°C.     

Solution equilibria in aqueous M2+-N-(2-Hydroxy-4-nitro) benzylglycine systems. Part 3. 1:2 metal-ligand mixtures

Summary Formation of the complex species ML and ML ₂ ^2– has been inferred from pH measurements on the interaction of Ni²⁺, Co²⁺, Zn²⁺ and Cd²⁺ ions withN-(2-hydroxy-4-nitro)-benzylglycine in 12 metal: ligand mixtures in aqueous solution [25°C; I = 0.1 M NaClO₄]. The stoichiometric equilibrium constants have been evaluated by a modified algebraic approach and by the Irving and Rossotti method in its original form. A treatment is also described which allows determination of the proportions of metal ion distributed among the various species as a function of pH.     

Uptake of Divalent Metal Ions (Cu2+, Zn2+ and Cd2+) by Polysiloxane Immobilized Glycinate Ligand System

ABSTRACT

Porous solid siloxane polymer carrying glycinate functional group of formula –(CH₂)₃NHCH₂COOH has been prepared by the sol-gel process. Treatment of aqueous solutions of divalent metal ions with the polysiloxane glycinate ligand system demonstrates that this material exhibits high potential for preconcentration of metal ions (Cu²⁺, Zn²⁺ and Cd²⁺). The ligand system chemisorbs these divalent metal ions, at optimum conditions, in the order: Cd²⁺ < Zn²⁺ < Cu²⁺. The uptake of copper ions is concentration dependent but it is independent on the presence of other competing ions. Treatment of the glycinate ligand system with acidic solution results in leaching of bound ligands. The highest leaching occurs in presence of copper ions at low pH     

Extraction and preconcentration capacity of bifunctionalized diamine-thiol polysiloxane immobilized ligand system towards some divalent cations

Porous solid bi-organofunctionalized diamine-thiol polysiloxane immobilized ligand system of the general formula P-(CH₂)₃- X, (where P represents [Si-O]_n siloxane network and X represents a mixture of diamine; -NH(CH)₂NH₂ and thiol; -SH functional groups) has been prepared by hydrolytic polycondensation of TEOS with a mixture of 3-mercaptopropyltrimethoxysilane and 3- (2-aminoethylimino)propyltrimethoxysilane agents. The ligand system was evaluated for extraction and preconcentartion of a series of divalent metal ions from aqueous solutions including: Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺. Both batch and dynamic methods were used to examine maximum sorption capacity. The maximum binding capacity followed the sequence; Cu²⁺ > Pb²⁺ > Cd²⁺ > Ni²⁺ > Zn²⁺ > Co²⁺ at pH 5.5. Measurement of variation of sorption of metal ions with temperature yielded negative values of ΔG° and positive values of ΔS° and ΔH° indicating a spontaneous and endothermic process of binding metal ions to the ligand system.     

Fluorescent chemosensor for mercury(II) cations in an aqueous solution based on 4-acetylamino-1, 8-naphthalimide derivative containing the N-phenylazadithia-15-crown-5-ether receptor

The 4-acetylamino-1,8-naphthalimide derivative containing the N-phenylazadithia-15-crown-5-ether fragment in the N-aryl substituent at the imide nitrogen atom of the naphthalimide core was synthesized, and its cation-dependent spectral properties were studied. The resulting compound in the photoexcited state exhibits low-intensity fluorescence due to the process of electron transfer from the N-aryl group to the naphthalimide residue, which is confirmed by the data of quantum chemical calculations performed using the PM6 method. The binding of Hg²⁺ in an aqueous acetate buffer solution at pH 6.0 is accompanied by the formation of a 1: 1 metal—ligand complex in which the electron transfer is suppressed leading to fluorescence enhancement. The observed spectral changes were used for the determination of the stability constant K of the complex (logK = 6.51±0.03). The found limit of Hg²⁺ detection using the synthesized sensor (28 nmol L^?1) is fairly close the maximum permissible concentration for mercury in drinking water. The study of the selectivity of complexation showed that the presence of Cu²⁺, Zn²⁺, Ni²⁺, Pb²⁺ Cd²⁺, Ca²⁺, Mg²⁺, and Fe²⁺ cations did not impede the determination of Hg²⁺. The presented results indicate that the synthesized chemosensor is promising as a selective and highly sensitive fluorescent reagent for Hg²⁺ ions in an aqueous solution.

     

The synthesis,characterization and spectral studies of Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) complexes with N,N-bis(2-{[(2-methyl-2-phenyl-1,3-dioxolan-4-yl) methyl]amino}butyl) N′,N′-dihydroxyethanediimidamide

Co^II, Ni^II, Cu^II, Zn^II and Cd^II complexes of N,N-bis(2-{[(2-methyl-2-phenyl-1,3-dioxolan-4-yl)methyl]amino}butyl)N′,N′-dihydroxyethanediimidamide (LH₂) were synthesized and characterized by elemental analyses, IR, ¹H- and ¹³C-NMR spectra, electronic spectra, magnetic susceptibility measurements, conductivity measurements and thermogravimetric analyses (TGA). The Co^II, Ni^II and Cu^II complexes of LH₂ were synthesized with 1?:?2 metal ligand stoichiometry. Zn^II and Cd^II complexes with LH₂ have a metal ligand ratio of 1?:?1. The reaction of LH₂ with Co^II, Ni^II, Cu^II, Zn^II and Cd^II chloride give complexes Ni(LH)₂, Cu(LH)₂, Zn(LH₂)(Cl)₂, Cd(LH₂)(Cl)₂, respectively.     

Synthesis and characterization of an unsymmetric salicylaldimine ligand derived from 1-(2-Aminoethyl) piperazine and investigation of its analytical properties for the extraction and preconcentratoion of some divalent cations

The synthetic, structural, spectroscopic and analytical properties of steric hindered Schiff-base ligand [N-(3,5-di-tert-butylsalicylaldimine)-1-(2-Aminoethyl) piperazine (HL)] and its mononuclear Cu(II), Co(II) and Ni(II) complexes are described. The new unsymmetric steric hindered Schiff base ligand containing a donor set of NONO was prepared by the reaction of 1-(2-Aminoethyl) piperazine with 3,5-di-tert-butylsalicylaldehyde. Certain metal complexes of this ligand were synthesized by treating an ethanolic solution of the ligand with an equimolar amount of metal salts. The ligand and its metal complexes were characterized by FT-IR, UV-Vis, ¹H NMR, elemental analysis, molar conductivity and magnetic susceptibility techniques. The reaction of this ligand in a 1:2 mole ratio with metal acetate afforded mononuclear metal complexes. The molar conductivity (??_M) values of the metal complexes of Ni(II), Co(II) and Cu(II) were in the range of 6.4 to 9.8 ??^?1 cm² mol^?1 at room temperature. Preconcentration and separation of Cu²⁺ from aqueous solution using N-(3,5-di-tert-butylsalicylaldimine)-1-(2-Aminoethyl) piperazine (HL) as a new extractant were studied. The extraction experiments were carried out at various pHs. While Cu²⁺ showed the highest extractability and selectivity at pH 7.0, extractions of Co²⁺ and Ni²⁺ were unsuccessful due to precipitate formation.     

Synthesis and metal-ion binding properties of new N2S4- and N2S5-donor macrocycles

Synthetic procedures for new N₂S₄- and N₂S₅-donor macrocycles (2 and 4) were given. The ligands were prepared by the reaction of NaBH₄ with the appropriate macrocyclic diamide in the presence of boron trifluoride ethyl etherate in dry tetrahydrofuran (THF). Solvent extraction method was used to evaluate metal-ion binding properties of the new ligands. The solvent extraction experiments suggested that the reduced macrocycles have Ag⁺ and Hg²⁺ selectivities compared to Pb²⁺, Co²⁺, Zn²⁺, Ni²⁺, Cu²⁺, Mn²⁺ and Cd²⁺ ions. The extraction constants (log K _ex) and complex compositions were determined for Ag⁺ and Hg²⁺ complex of compound (4).     

Synthesis of a Dithiocarbamate Chelate Resin and Its Oxidized form and Their Adsorption Properties for Heavy Metal Ions

A series of macroporous dithiocarbamate chelate resins, III and V, and an oxidized resin, VI, with high adsorption capacity were prepared. The influence of various reaction conditions of amination, dithiocarboxylation, and oxidation were examined. The structure and the conversion of functional groups of resins were confirmed by IR spectra and elemental analysis. The adsorption capacities of Resin II for Hg²⁺, Cu²⁺, Zn²⁺, and Cd²⁺ are 4.40, 2.44, 1.77, and 1.36 mmol/g, respectively. The adsorption capacities of Resins V and VI for Cu²⁺. Zn²⁺, Ni²⁺, Co³⁺, Ag⁺, Hg²⁺, Cd²⁺, Pb²⁺, and Au³⁺ are 4.07–0.51 and 3.81–0.59 meq ion/g, respectively. The adsorption rate and the influence of pH on the adsorption percentage of the resins for metal ions were examined. Noble metal, transitional metal, and heavy metal ions can be quantitatively adsorbed by the resins. The adsorbed Cu²⁺, Pb²⁺, Cd²⁺, Co³⁺, and Ni²⁺ can be quantitatively eluted with 5N HNO₃, and the presence of large amounts of Ca²⁺, Mg²⁺, Fe³⁺, and Al³⁺ did not interfere.     

Synthesis and Applications of a New Polysiloxane-Immobilized Macrocyclic Ligand System

Abstract

Insoluble porous solid, macrocyclic 22-membered ring, 1-oxa-6,9,12,15,18-pentaaza-2,22-disilacyclododocosane polysiloxane ligand system has been prepared by the reaction of a macro-silane agent with tetraethylorthosilicate. The macro-silane agent was prepared by the reaction of imino-bis(N-2-aminoethylacetamide) ligand with 3-iodopropyltrimethoxysilane in 1:3 molar ratio. The new prepared polysiloxane system exhibits variable potentials for the extraction of metal ions (Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, Hg²⁺, and Pb²⁺) from aqueous solutions. The ligand system shows high capacity to extract silver, lead, and mercury. Chemisorption of the metal ions by the ligand system at the optimum conditions was found in the order Ag ⁺ > Pb²⁺ > Hg²⁺ > Cu²⁺ > Ni²⁺ > Fe³⁺ > Co²⁺ > Cd²⁺ > Zn²⁺.     

Effects of Ligand Chain Length and Terminal N-Alkylation on the Protonation Constants and Stability Constants of Some Transition Metal Complexes of Linear Tetraaza and Pentaaza Ligands

A number of terminal N-alkylated linear tetraaza and pentaaza ligands were prepared. Their ligand protonation constants and some transition and post-transition metal (Ni²⁺, Cu²⁺, Zn²⁺, and Cd²⁺) complex stability constants were determined by potentiometric titration methods. In general, methylation and ethylation at the terminal nitrogen atoms caused the corresponding ligand nitrogen basicity to increase; however, the corresponding metal complex stabilities were decreased compared to the non-alkylated structural analogs, presumably due to a steric effect.     

Novel calix[4]arene-thiacrown ether for selective and efficient extraction of Ba(II), Pb(II), and Hg(II)

A di-ionizable p-tert-butylcalix[4]arene-1,3-thiacrown-5 ether extractant was synthesized. Its cone conformation and polyether ring attachment regioselectivity were verified by NMR spectroscopy. The metal ion-complexing properties of this ligand were evaluated by solvent extractions of metal cations from aqueous solutions into chloroform. The ligand was found to be an efficient extractant with Ba²⁺ selectivity in competitive solvent extraction of alkaline earth metal cations. It also exhibits high extraction ability for Pb²⁺ and for Hg²⁺ in single species solvent extractions.