Novel WS2/Fe0.95S1.05 Hierarchical Nanosphere as a Highly Efficient Electrocatalyst for Hydrogen Evolution Reaction

Fe_0.95S_1.05 with high reactivity and stability was incorporated into WS₂ nanosheets via a one-step solvothermal method for the first time. The resulted hybrid catalyst has much higher catalytic activity than WS₂ and Fe_0.95S_1.05 alone, and the optimal WS₂/Fe_0.95S_1.05 hybrid catalyst was found by adjusting the feed ratio. The addition of Fe_0.95S_1.05 was proven to be able to enhance the hydrogen evolution reaction (HER) activity of WS₂, and vice versa. At the same time, it was found that the catalytic effect of the hybrid catalyst was the best when the feed ratio was W : Fe=2 : 1. In other words, we confirmed that there is a synergistic effect between W- and Fe-based sulfide hybrid catalysts, and validated that the reason for the improved HER performance is the strong interaction between the two in the middle sulfur. WS₂/Fe_0.95S_1.05-2 hybrid catalyst leads to enhanced HER activity, which shows a low overpotential of ∼0.172 V at 10 mA cm⁻², low Tafel slope of ∼53.47 mV/decade. This study supplies innovative synthesis of a highly active WS₂/Fe_0.95S_1.05 hybrid catalyst for HER.     

泡沫铜负载硫化亚铜电极高效电催化还原二氧化碳制备甲酸

电催化还原二氧化碳制备甲酸是备受关注的热点问题。而电极材料是决定还原效率的重要因素。本文通过电沉积方法在泡沫铜上直接制备纳米结构硫化亚铜薄膜,并采用扫描电镜(SEM)、X射线衍射(XRD)对其结构性能进行了系统研究。以硫化亚铜作为阴极电催化材料、0.5 mol·L^-1 1-丁基-3-甲基咪唑四氟硼酸盐的乙腈溶液为电解液,在该体系中可高效催化转化二氧化碳为甲酸。结果表明,这一电解体系可有效实现电化学反应,甲酸的法拉第效率(FE_HCOOH)可以达到85%,同时甲酸还原电流密度可达到5.3 mA·cm^-2。     

泡沫镍载碳化钨催化剂上的析氢反应

结合直接化学还原法和交替微波法制备了泡沫Ni载Ni-WC催化剂,用X射线衍射、扫描电镜和透射电镜对催化剂进行了表征,研究了其析氢电催化性能.结果表明,在相同条件下,泡沫Ni载Ni-WC催化剂的析氢起始电位与泡沫Ni相比降低了60 mV左右.电解质浓度和温度对泡沫Ni载Ni-WC催化剂的析氢电催化活性有很大影响.     

Amorphous Co-P Film: an Efficient Electrocatalyst for Hydrogen Evolution Reaction in Alkaline Seawater

Seawater electrolysis is considered an attractive alternative to conventional freshwater electrolysis for hydrogen production due to the abundance of seawater in nature. For this reason, efficient electrocatalysts for hydrogen evolution reaction (HER) in alkaline seawater are highly desired. In this study, we report an amorphous Co−P alloy on nickel foam (Co−P/NF) that behaves as an efficient and stable HER electrocatalyst for alkaline seawater electrolysis. The Co−P/NF presents high catalytic performance for HER, requiring a low overpotential of 213 mV to drive a current density of 100 mA cm⁻² and a Tafel slope of 120.2 mV dec⁻¹ in alkaline seawater. Furthermore, it shows remarkable electrochemical and structural stability in alkaline seawater.     

Vanadium‐Doped WS2 Nanosheets Grown on Carbon Cloth as a Highly Efficient Electrocatalyst for the Hydrogen Evolution Reaction

Two‐dimensional transition‐metal dichalcogenides have been widely studied as electrocatalysts for the hydrogen evolution reaction (HER). However, limited active sites and poor conductivity hinder their application. To solve these disadvantages, heteroatom doping has attracted wide attention because it can not only increase the active sites but also affect the intrinsic catalytic properties of the electrocatalyst. Herein, we grew vanadium‐doped WS₂ nanosheets on carbon cloth (V‐WS₂/CC) as an electrocatalyst for HER under acidic and alkaline conditions. With a proper vanadium doping concentration, the electrochemical surface areas of V_0.065‐WS₂/CC were 9.6 and 2.6 times as large as that of pure WS₂ electrocatalyst under acidic and alkaline conditions, respectively. In addition, the charge‐transfer resistance also decreased with moderate vanadium doping. Based on this, the synthesized vanadium‐doped WS₂ nanosheets exhibited good stability with high HER catalytic activity and could reach a current density of 10 mA cm⁻² at overpotentials of 148 and 134 mV in 0.5 m H₂SO₄ and 1 m KOH, respectively. The corresponding Tafel slopes were 71 and 85 mV dec⁻¹. Therefore, our synthesized vanadium‐doped WS₂ nanosheets can be a promising electrocatalyst for the production of hydrogen over a wide pH range.     

MoS2 Nanosheets Supported on 3D Graphene Aerogel as a Highly Efficient Catalyst for Hydrogen Evolution

The development of efficient catalysts for electrochemical hydrogen evolution is essential for energy conversion technologies. Molybdenum disulfide (MoS₂) has emerged as a promising electrocatalyst for hydrogen evolution reaction, and its performance greatly depends on its exposed edge sites and conductivity. Layered MoS₂ nanosheets supported on a 3D graphene aerogel network (GA‐MoS₂) exhibit significant catalytic activity in hydrogen evolution. The GA‐MoS₂ composite displays a unique 3D architecture with large active surface areas, leading to high catalytic performance with low overpotential, high current density, and good stability.     

Carbon Nanotube Supported Molybdenum Carbide as Robust Electrocatalyst for Efficient Hydrogen Evolution Reaction

Molybdenum carbide is considered to be one of the most competitive catalysts for hydrogen evolution reaction (HER) regarding its high catalytic activity and superior corrosion resistance. But the low electrical conductivity and poor interfacial contact with the current collector greatly inhibit its practical application capability. Herein, carbon nanotube (CNT) supported molybdenum carbide was assembled via electrostatic adsorption combined with complex bonding. The N-doped molybdenum carbide nanocrystals were uniformly anchored on the surfaces of amino CNTs, which depressed the agglomeration of nanoparticles while strengthening the migration of electrons. The optimized catalyst (250-800-2h) showed exceptional electrocatalytic performance towards HER under both acidic and alkaline conditions. Especially in 0.5 M H₂SO₄ solution, the 250-800-2h catalyst exhibited a low overpotential of 136 mV at a current density of 10 mA/cm² (η₁₀) with the Tafel slope of 49.9 mV dec⁻¹, and the overpotential only increased 8 mV after 20,000 cycles of stability test. The active corrosive experiment revealed that more exposure to high-activity γ-Mo₂N promoted the specific mass activity of Mo, thus, maintaining the catalytic durability of the catalyst.     

Mo-Doped Cu2S Multilayer Nanosheets Grown In Situ on Copper Foam for Efficient Hydrogen Evolution Reaction

Metal sulfide electrocatalyst is developed as a cost-effective and promising candidate for hydrogen evolution reaction (HER). In this work, we report a novel Mo-doped Cu₂S self-supported electrocatalyst grown in situ on three-dimensional copper foam via a facile sulfurization treatment method. Interestingly, Mo-Cu₂S nanosheet structure increases the electrochemically active area, and the large fleecy multilayer flower structure assembled by small nanosheet facilitates the flow of electrolyte in and out. More broadly, the introduction of Mo can adjust the electronic structure, significantly increase the volmer step rate, and accelerate the reaction kinetics. As compared to the pure Cu₂S self-supported electrocatalyst, the Mo-Cu₂S/CF show much better alkaline HER performance with lower overpotential (18 mV at 10 mA cm⁻², 322 mV at 100 mA cm⁻²) and long-term durability. Our work constructs a novel copper based in-situ metal sulfide electrocatalysts and provides a new idea to adjust the morphology and electronic structure by doping for promoting HER performance.     

MOF-Conductive Polymer Composite Film as Electrocatalyst for Oxygen Reduction in Acidic Media

A metal-organic framework（MOF）-conductive polymer composite film was constructed from PCN-222（Fe） nanoparticles and PEDOT:PSS solution by simple drop-casting approach. The composite film was tested as an electrocatalytic device for oxygen reduction reaction（ORR）. The combination of PCN-222（Fe） MOF particles and conductive PEDOT matrix facilitates electron transfer in the composite material and improves the ORR performance of PCN-222（Fe）. Levich plot and H₂O₂ quantification ...     

二硫化钼析氢电催化剂

电解水与一次可再生能源耦合,可同时提供洁净制氢方式与先进的能源转化技术,有望在未来清洁能源经济中扮演重要角色,而实现这一美好愿景的关键在于研发高活性、低成本的析氢/析氧电催化材料。二硫化钼(MoS₂)是颇具代表性的非贵金属析氢电催化材料,纵观其研究历程,先导性理论预测与材料设计、先进制备与表征技术的应用均在改性研究中发挥了至关重要的作用,这也从一个侧面折射出当代电催化剂的研究模式与发展趋势。本文按照重要发现与进展的时间顺序,梳理了MoS₂析氢电催化剂的发展历程,重点论述了增多边缘活性位、提高导电性、构筑基面活性位等改性策略的实施方法、效果与机理,最后从全领域总结了MoS₂析氢电催化剂的研究启示并展望其未来发展趋势。     

Bioinspired Construction of Ruthenium-decorated Nitrogen-doped Graphene Aerogel as an Efficient Electrocatalyst for Hydrogen Evolution Reaction

Rational construction of low-cost, efficient, and durable electrocatalysts for the hydrogen evolution reaction(HER) is essential to further develop water electrolysis industry. Inspired by the natural enzyme catalysis with coordination environments of catalytic sites and three-dimensional structures, we construct an efficient Ru-based catalyst anchored on the nitrogen dopant on graphene aerogel(Ru-NGA). The Ru-NGA catalyst exhibits dramatically improved electroactivity and stability towards HER with a near-zero onset overpotential, a low Tafel slope of 32 mV/dec, and a high turnover frequency of 5.5 s^-1 at -100 mV. The results show that the electronic modulation of metallic Ru nanoparticles by nitrogen coordination weakens the affinity of Ru towards H and hence facilitates the desorption of hydrogen. This research provides in-depth insights into the fundamental relationship between metallic nanostructure and HER activity, and also guides the rational design of high-performance electrocatalysts in energy conversion.     

NixCo3‐xO4 Nanoneedle Arrays Grown on Ni Foam as an Efficient Bifunctional Electrocatalyst for Full Water Splitting

Developing highly active, stable and robust electrocatalysts based on earth‐abundant elements for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is important for many renewable energy conversion processes. Herein, Ni_xCo_3‐xO₄ nanoneedle arrays grown on 3D porous nickel foam (NF) was synthesized as a bifunctional electrocatalyst with OER and HER activity for full water splitting. Benefiting from the advantageous structure, the composite exhibits superior OER activity with an overpotential of 320 mV achieving the current density of 10 mA cm^?2. An exceptional HER activity is also acquired with an overpotential of 170 mV at the current density of 10 mA cm^?2. Furthermore, the catalyst also shows the superior activity and stability for 20 h when used in the overall water splitting cell. Thus, the hierarchical 3D structure composed of the 1D nanoneedle structure in Ni_xCo_3‐xO₄/NF represents an avenue to design and develop highly active and bifunctional electrocatalysts for promising energy conversion.     

Self-Assembled Two-Dimensional NiO/CeO2 Heterostructure Rich in Oxygen Vacancies as Efficient Bifunctional Electrocatalyst for Alkaline Hydrogen Evolution and Oxygen Evolution

The development of high-efficiency bifunctional electrocatalysts toward the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline surroundings is essential and challenging for the large-scale generation of clean hydrogen. Herein, a novel self-assembled two-dimensional (2 D) NiO/CeO₂ heterostructure (HS) consisting of NiO and CeO₂ nanocrystals is prepared through a facile two-step approach, and utilized as an enhanced bifunctional electrocatalyst for the HER and OER under alkaline conditions. It is concluded that this 2 D NiO/CeO₂ HS, rich in oxygen vacancies, demonstrates attractive electrocatalytic properties for both the HER and OER in 1 m KOH, including low onset overpotential (η₁), η₁₀ and Tafel slope, excellent durability, as well as large active surface area. Therefore, the self-assembled 2 D NiO/CeO₂ HS is believed to be an efficient bifunctional electrocatalyst toward the HER and OER.     

Bifunctional Electrocatalyst with 0D/2D Heterostructure for Highly Efficient Hydrogen and Oxygen Generation

A novel MoS₂ quantum dots/CoSe₂ nanosheet (MoS₂ QDs/CoSe₂) hybrid with 0D/2D heterostructure has been developed. The CoSe₂ nanosheets (NSs) enable an excellent oxygen evolution reaction (OER) activity with increasing vacancy configuration on one hand, while the MoS₂ QDs serve as an eminent hydrogen evolution reaction (HER) catalyst on the other. By integrating MoS₂ QDs and CoSe₂ NSs, the hybrid exhibits excellent electrocatalytic performances in HER and OER. The unique 0D/2D hetero‐interface increases the exposed active sites and facilitates electron transfer, thereby boosting the electrocatalytic activity. Relatively low overpotentials of 82 mV and 280 mV are required to drive the current density of 10 mA/cm² for HER and OER, with corresponding Tafel slopes of 69 and 75 mV/dec, respectively. As such, this work provides an efficient yet simple approach to construct bifunctional electrocatalysts with enhanced activity and stability.     

The Core/Shell Structure P Doped MoS2@Ni3S2 Nanorods Array for High Current Density Hydrogen Evolution in Alkaline and Acidic Electrolyte

Electrocatalysis is the most promising strategy to generate clean energy H₂, and the development of catalysts with excellent hydrogen evolution reaction (HER) performance at high current density that can resist strong alkaline and acidic electrolyte environment is of great significance for practical industrial application. Therefore, a P doped MoS₂@Ni₃S₂ nanorods array (named P-NiMoS) was successfully synthesized through successive sulfuration and phosphorization. P-NiMoS presents a core/shell structure with a heterojunction between MoS₂ (shell) and Ni₃S₂ (core). Furthermore, the doping of P modulates the electronic structure of the P-NiMoS; the electrons transfer from the t_2g orbital of Ni element to the e_g empty orbital of Mo element through the Ni−S−Mo bond at the Ni₃S₂ and MoS₂ heterojunction, facilitating the hydrogen evolution reaction. As a result, P-NiMoS exhibits excellent HER activity; the overpotential is 290 mV at high current density of 250 mA cm⁻² in alkaline electrolyte, which is close to Pt/C (282 mV@250 mA cm⁻²), and P-NiMoS can stably evolve hydrogen for 48 h.     

Hierarchical β‐Mo2C Nanotubes Organized by Ultrathin Nanosheets as a Highly Efficient Electrocatalyst for Hydrogen Production

Production of hydrogen by electrochemical water splitting has been hindered by the high cost of precious metal catalysts, such as Pt, for the hydrogen evolution reaction (HER). In this work, novel hierarchical β‐Mo₂C nanotubes constructed from porous nanosheets have been fabricated and investigated as a high‐performance and low‐cost electrocatalyst for HER. An unusual template‐engaged strategy has been utilized to controllably synthesize Mo‐polydopamine nanotubes, which are further converted into hierarchical β‐Mo₂C nanotubes by direct carburization at high temperature. Benefitting from several structural advantages including ultrafine primary nanocrystallites, large exposed surface, fast charge transfer, and unique tubular structure, the as‐prepared hierarchical β‐Mo₂C nanotubes exhibit excellent electrocatalytic performance for HER with small overpotential in both acidic and basic conditions, as well as remarkable stability.     

Carbon Dots Integrated NiCo2O4 Hierarchical Nanoneedle Arrays Supported on Ni Foam as Efficient and Stable Electrode for Hydrogen and Oxygen Evolution Reactions

The production of hydrogen and oxygen via water electrolysis has become a sustainable and encouraging pathway for the establishment of new energy sources. Herein, we report the successful growth of hierarchical NiCo₂O₄‐carbon dots (CDs) nanoneedle arrays supported on nickel foam through a simple and environmentally benign hydrothermal self‐assembly technique. The designed material acts as a binder free electrode and shows bifunctional electrocatalytic activity for both hydrogen evolution reaction (HER) as well as oxygen evolution reaction (OER) in alkaline medium. An electrocatalyst sample with an optimal loading of CDs (25 mg) requires a low overpotential of 146 mV to achieve a current density of 10 mA/cm² for the HER in an alkaline medium, whereas it requires an overpotential of 390 mV to achieve a current density of 50 mA/cm² for the OER in the same alkaline medium. The excellent electrocatalytic activities of the sample with loading of CD can be ascribed due to the presence of large number of exposed active sites offered by CD/NiCo₂O₄ and the enhanced electron transfer processes occurring as a result of hierarchical structure composed of three‐dimensional nickel foam and the NiCo₂O₄?CDs nanoneedle arrays. Thus, the synthesis method introduced in this present work is a facile and cost‐effective approach for the construction of bifunctional electrocatalysts with high reactivity and excellent durability.     

Electrosynthesis of CuO Nanocrystal Array as a Highly Efficient and Stable Electrocatalyst for Oxygen Evolution Reaction

Electrodeposition of active catalysts on electrodes appears as a convenient approach to prepare non-noble-metal based electrocatalysts with defined micro- and nano-structures. Herein we report a new strategy of fabricating a 3-D hierarchical CuO nanocrystal array (CuO NCA) on Cu foam through a two-step sacrifice-template method. This CuO NCA possesses high conductivity, great stability, and impressive catalytic activity for oxygen evolution reaction (OER) in alkaline electrolytes. The CuO NCA can achieve a high current density of 100 mA/cm\begin{document}$^2$\end{document} at a relatively low overpotential of 400 mV for OER, which shows a better performance than other Cu-based OER catalysts and IrO\begin{document}$_2$\end{document}. The high activity of CuO NCA is well retained during a 10-h OER test at a high current density around 270 mA/cm\begin{document}$^2$\end{document}, which is about 10 times higher than the current density achieved by IrO\begin{document}$_2$\end{document} (around 25 mA/cm\begin{document}$^2$\end{document}) with the same applied overpotential. According to our best knowledge, CuO NCA is currently the most efficient and stable Cu-based electrocatalyst for water oxidation in alkaline electrolytes.     

Low Ruthenium Content Confined on Boron Carbon Nitride as an Efficient and Stable Electrocatalyst for Acidic Oxygen Evolution Reaction

To date, only a few noble metal oxides exhibit the required efficiency and stability as oxygen evolution reaction (OER) catalysts under the acidic, high-voltage conditions that exist during proton exchange membrane water electrolysis (PEMWE). The high cost and scarcity of these catalysts hinder the large-scale application of PEMWE. Here, we report a novel OER electrocatalyst for OER comprised of uniformly dispersed Ru clusters confined on boron carbon nitride (BCN) support. Compared to RuO₂, our BCN-supported catalyst shows enhanced charge transfer. It displays a low overpotential of 164 mV at a current density of 10 mA cm⁻², suggesting its excellent OER catalytic activity. This catalyst was able to operate continuously for over 12 h under acidic conditions, whereas RuO₂ without any support fails in 1 h. Density functional theory (DFT) calculations confirm that the interaction between the N on BCN support and Ru clusters changes the adsorption capacity and reduces the OER energy barrier, which increases the electrocatalytic activity of Ru.