Prolonging charge-separation states by doping lanthanide-ions into {001}/{101} facets-coexposed TiO2 nanosheets for enhancing photocatalytic H2 evolution

Ultrathin TiO₂ nanosheets with coexposed {001}/{101} facets have attracted considerable attention because of their high photocatalytic activity. However, the charge-separated states in the TiO₂ nanosheets must be extended to further enhance their photocatalytic activity for H₂ evolution. Herein, we present a successful attempt to selectively dope lanthanide ions into the {101} facets of ultrathin TiO₂ nanosheets with coexposed {001}/{101} facets through a facile one-step solvothermal method. The lanthanide doping slightly extended the light-harvesting region and markedly improved the charge-separated states of the TiO₂ nanosheets as evidenced by UV-vis absorption and steady-state/transient photoluminescence spectra. Upon simulated sunlight irradiation, we observed a 4.2-fold enhancement in the photocatalytic H₂ evolution activity of optimal Yb³⁺-doped TiO₂ nanosheets compared to that of their undoped counterparts. Furthermore, when Pt nanoparticles were used as cocatalysts to reduce the H₂ overpotential in this system, the photocatalytic activity enhancement factor increased to 8.5. By combining these results with those of control experiments, we confirmed that the extended charge-separated states play the main role in the enhancement of the photocatalytic H₂ evolution activity of lanthanide-doped TiO₂ nanosheets with coexposed {001}/{101} facets.     

Bi2Fe4O9/g-C3N4/UiO-66三元复合材料的协同光催化作用

通过水热法合成具有协同机制的三元复合材料Bi₂Fe₄O₉/g-C₃N₄/UiO-66,研究表明三元复合光催化剂的催化活性要高于二元材料和纯材料。这主要是由于Bi₂Fe₄O₉更易于和g-C₃N₄结合形成稳定的Z-scheme异质结结构,使三元复合材料增强了可见光响应能力,提高了电子-空穴分离能力,增强了空穴和电子的氧化还原能力。     

Bi2Fe4O9/g-C3N4/UiO-66三元复合材料的协同光催化作用

通过水热法合成具有协同机制的三元复合材料Bi₂Fe₄O₉/g-C₃N₄/UiO-66,研究表明三元复合光催化剂的催化活性要高于二元材料和纯材料。这主要是由于Bi₂Fe₄O₉更易于和g-C₃N₄结合形成稳定的Z-scheme异质结结构,使三元复合材料增强了可见光响应能力,提高了电子-空穴分离能力,增强了空穴和电子的氧化还原能力。     

Synthesis of Cs2.5H0.5PW12O40/TiO2 Nanocomposites with Dominant TiO2 {001} Facets and Related Photocatalytic Properties

TiO₂ nanosheets with dominant {001} facets, coupled with Cs_2.5H_0.5PW₁₂O₄₀, were successfully synthesized by a one‐step hydrothermal reaction. The photocatalytic activity of nanocatalysts was evaluated by the degradation of Rhodamine B under UV light irradiation. The results showed that both the addition of Cs_2.5H_0.5PW₁₂O₄₀ and the exposed {001} facets of TiO₂ have a positive effect on the photocatalytic activity. The improved photoactivity of nanocomposites in comparison with that of TiO₂ nanosheets could be attributed to the synergistic effect between Cs_2.5H_0.5PW₁₂O₄₀ and TiO₂ which facilitates the separation of photo‐induced hole‐electron pairs.     

Facet-Control versus Co-Catalyst-Control in Photocatalytic H2 Evolution from Anatase TiO2 Nanocrystals

Titanium dioxide (TiO₂) and, in particular, its anatase polymorph, is widely studied for photocatalytic H₂ production. In the present work, we examine the importance of reactive facets of anatase crystallites on the photocatalytic H₂ evolution from aqueous methanol solutions. For this, we synthesized anatase TiO₂ nanocrystals with a large amount of either {001} facets, that is, nanosheets, or {101} facets, that is, octahedral nanocubes, and examined their photocatalytic H₂ evolution and then repeated this procedure with samples where Pt co-catalyst is present on all facets. Octahedral nanocubes with abundant {101} facets produce >4 times more H₂ than nanosheets enriched in {001} facets if the reaction is carried out under co-catalyst-free conditions. For samples that carry Pt co-catalyst on both {001} and {101} facets, faceting loses entirely its significance. This demonstrates that the beneficial role of faceting, namely the introduction of {101} facets that act as electron transfer mediator is relevant only for co-catalyst-free TiO₂ surfaces.     

Synthesis of {100} Facet Dominant Anatase TiO2 Nanobelts and the Origin of Facet‐Dependent Photoreactivity

Sword‐like anatase TiO₂ nanobelts exposed with 78 % clean {100} facets were synthesized and the facet‐dependent photoreactivity of anatase TiO₂ was investigated. By quantitative comparison with the reference {001} facets, the {100} facets possessed about ten‐times higher active sites density than that on {001} facets, resulting in higher photoreaction efficiency. After the active sites density normalization, the {100} and {001} facets exhibited distinct wavelength‐dependent photocatalytic performance, attributed to the anisotropic electronic structures in TiO₂ crystals.     

Template‐Free Synthesis of Core–Shell TiO2 Microspheres Covered with High‐Energy {116}‐Facet‐Exposed N‐Doped Nanosheets and Enhanced Photocatalytic Activity under Visible Light

Core–shell TiO₂ microspheres possess a unique structure and interesting properties, and therefore, they have received much attention. The high‐energy facets of TiO₂ also are being widely studied for the high photocatalytic activities they are associated with. However, the synthesis of the core–shell structure is difficult to achieve and requires multiple‐steps and/or is expensive. Hydrofluoric acid (HF), which is highly corrosive, is usually used in the controlling high‐energy facet production. Therefore, it is still a significant challenge to develop low‐temperature, template‐free, shape‐controlled, and relative green self‐assembly routes for the formation of core–shell‐structured TiO₂ microspheres with high‐energy facets. Here, we report a template‐ and hydrofluoric acid free solvothermal self‐assembly approach to synthesize core–shell TiO₂ microspheres covered with high‐energy {116}‐facet‐exposed nanosheets, an approach in which 1,4‐butanediamine plays a key role in the formation of nanosheets with exposed {116} facets and the doping of nitrogen in situ. In the structure, nanoparticle aggregates and nanosheets with {116} high‐energy facets exposed act as core and shell, respectively. The photocatalytic activity for degradation of 2,4,6‐tribromophenol and Rhodamine B under visible irradiation and UV/Vis irradiation has been examined, and improved photocatalytic activity under visible light owing to the hierarchical core–shell structure, {116}‐plane‐oriented nanosheets, in situ N doping, and large surface areas has been found.     

Crystal‐Facet Engineering of Ferric Giniite by Using Ionic‐Liquid Precursors and Their Enhanced Photocatalytic Performances under Visible‐Light Irradiation

In the work presented here, well‐dispersed ferric giniite microcrystals with controlled sizes and shapes are solvothermally synthesized from ionic‐liquid precursors by using 1‐n‐butyl‐3‐methylimidazolium dihydrogenphosphate ([Bmim][H₂PO₄]) as phosphate source. The success of this synthesis relies on the concentration and composition of the ionic‐liquid precursors. By adjusting the molar ratios of Fe(NO₃)₃ ? 9H₂O to [Bmim][H₂PO₄] as well as the composition of ionic‐liquid precursors, we obtained uniform microstructures such as bipyramids exposing {111} facets, plates exposing {001} facets, hollow spheres, tetragonal hexadecahedron exposing {441} and {111} facets, and truncated bipyamids with carved {001} facets. The crystalline structure of the ferric giniite microcrystals is disclosed by various characterization techniques. It was revealed that [Bmim][H₂PO₄] played an important role in stabilizing the {111} facets of ferric giniite crystals, leading to the different morphologies in the presence of ionic‐liquid precursors with different compositions. Furthermore, since these ferric giniite crystals were characterized by different facets, they could serve as model Fenton‐like catalysts to uncover the correlation between the surface and the catalytic performance for the photodegradation of organic dyes under visible‐light irradiation. Our measurements indicate that the photocatalytic activity of as‐prepared Fenton‐like catalysts is highly dependent on the exposed facets, and the surface area has essentially no obvious effect on the photocatalytic degradation of organic dyes in the present study. It is highly expected that these findings are useful in understanding the photocatalytic activity of Fenton‐like catalysts with different morphologies, and suggest a promising new strategy for crystal‐facet engineering of photocatalysts for wastewater treatment based on heterogeneous Fenton‐like process.     

Densely packed single-crystal Bi2Fe4O9 nanowires fabricated from a template-induced sol-gel route

Densely packed single-crystal Bi₂Fe₄O₉ nanowires were successfully synthesized by a template-induced citrate-based sol-gel process. The structural properties of the nanowires were characterized using many techniques. The results of scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed that Bi₂Fe₄O₉ nanowires possessed a uniform length and diameter, which were controlled by the thickness and the pore diameter of the applied porous anodic aluminum oxide (AAO) template, respectively. The results of X-ray diffraction (XRD) and the selected area electron diffraction (SAED) indicated that Bi₂Fe₄O₉ nanowires had an orthorhombic single-crystal structure. Furthermore, the energy-dispersive X-ray (EDX) spectroscopy demonstrated that the stoichiometric Bi₂Fe₄O₉ was formed. The possible formation mechanism of nanowires was also discussed.     

Synthesis and Photocatalytic Activity of TiO2/CdS Nanocomposites with Co-Exposed Anatase Highly Reactive Facets

In this work, TiO₂/CdS nanocomposites with co-exposed {101}/[111]-facets (NH4F-TiO2/CdS), {101}/{010} facets (FMA-TiO2/CdS), and {101}/{010}/[111]-facets (HF-TiO2/CdS and Urea-TiO2/CdS) were successfully synthesized through a one-pot solvothermal method by using [Ti₄O₉]²⁻ colloidal solution containing CdS crystals as the precursor. The crystal structure, morphology, specific surface area, pore size distribution, separation, and recombination of photogenerated electrons/holes of the TiO₂/CdS nanocomposites were characterized. The photocatalytic activity and cycling performance of the TiO₂/CdS nanocomposites were also investigated. The results showed that as-prepared FMA-TiO₂/CdS with co-exposed {101}/{010} facets exhibited the highest photocatalytic activity in the process of photocatalytic degradation of methyl orange (MO), and its degradation efficiency was 88.4%. The rate constants of FMA-TiO₂/CdS was 0.0167 min⁻¹, which was 55.7, 4.0, 3.7, 3.5, 3.3, and 1.9 times of No catalyst, CdS, HF-TiO₂/CdS, NH₄F-TiO₂/CdS, CM-TiO₂, Urea-TiO₂/CdS, respectively. The highest photocatalytic activity of FMA-TiO₂/CdS could be attributed to the synergistic effects of the largest surface energy, co-exposed {101}/{010} facets, the lowest photoluminescence intensity, lower charge-transfer resistance, and a higher charge-transfer efficiency.     

Electrospun Hierarchical LiV3O8 Nanofibers Assembled from Nanosheets with Exposed {100} Facets and their Enhanced Performance in Aqueous Lithium‐Ion Batteries

Hierarchical LiV₃O₈ nanofibers, assembled from nanosheets that have exposed {100} facets, have been fabricated by using electrospinning combined with calcination. The formation mechanism of hierarchical nanofibers was investigated by X‐ray diffraction and scanning electron microscopy. Poly(vinyl alcohol) (PVA) played a dual role in the formation of the nanofibers: besides acting as the template for forming the fibers, it effectively prevented the aggregation of LiV₃O₈ nanoparticles, thereby allowing them to grow into small nanosheets with exposed {100} facets owing to the self‐limitation property of LiV₃O₈. This nanostructure is beneficial for the insertion/extraction of lithium ions. Meanwhile, the {100} facets have fewer and smaller channels, which may effectively alleviate proton co‐intercalation into the electrode materials. Hence, the hierarchical LiV₃O₈ nanofibers exhibit higher discharge capacities and better cycling stabilities as the anode electrode material for aqueous lithium‐ion batteries than those reported previously. We demonstrate that these hierarchical nanofibers have promising potential applications in aqueous lithium‐ion batteries.     

{001} facets dominated anatase TiO2: Morphology, formation/etching mechanisms and performance

Controllable growth of anatase TiO2 crystals with exposed high reactive crystal facets has aroused great attention in the fields of science and technology due to their unique structure-dependent properties. Recently, much effort has been paid to synthesize anatase TiO2 crystals with exposed high reactive {001} facets. Herein, we review the recent progress in synthesizing {001} facets dominated anatase TiO2 crystals with different morphologies by various synthetic methods. Furthermore, our review is mainly focused on the formation/etching mechanisms of {001} facets dominated anatase TiO2 crystals based on our and other studies. The extensive application potentials of the anatase TiO2 crystals with exposed {001} facets have been summarized in this review such as photocatalysis, photoelectrocatalysis, solar energy conversion, lithium ion battery, and hydrogen generation. Based on the current studies, we give some perspectives on the research topic. We believe that this comprehensive review on anatase TiO2 crystals with high reactive {001} facets can further promote the relative research in this field.     

Graphite-like carbon deposited anatase TiO<Subscript>2</Subscript> single crystals as efficient visible-light photocatalysts

Graphite-like carbon deposited single-crystal anatase TiO₂ with exposed {001} facets was fabricated through a two-step solvothermal process by using glucose as carbon source. The physicochemical properties of the as-prepared samples were investigated by X-ray diffraction, Brunauer-Emmett-Teller, transmission electron microscopy, Raman, UV–vis diffuse reflectance spectra, electrochemical impedance spectroscopy and surface photovoltage spectroscopy. These results demonstrated that graphite-like carbon layers were deposited on the surface of TiO₂ single-crystal nanosheets with exposed highly reactive {001} facets via the dehydration of glucose during the process of hydrothermal treatment. The loading of the graphite-like carbon layers could effectively extend the light absorption edge of the single-crystal anatase TiO₂ nanosheets to visible light region and accelerate the separation of photo-generated electrons and holes, contributing an excellent visible-light driven photocatalytic performance to the graphite-like carbon deposited single-crystal anatase TiO₂ nanosheets for the degradation of methyl orange.     

Graphitic-C<Subscript>3</Subscript>N<Subscript>4</Subscript> quantum dots decorated {001}-faceted TiO<Subscript>2</Subscript> nanosheets as a 0D/2D composite with enhanced solar photocatalytic activity

Zero-dimensional (0D)/two-dimensional (2D) heterojunctions have attracted great attention in photocatalysis due to their superior interfacial effects. In this work, 0D g-C₃N₄ quantum dots (CNQDs) were firstly used to modify {001}-faceted 2D TiO₂ nanosheets by a simple solvothermal method. During the controlled growth of TiO₂ nanosheets with exposed reactive {001} facets, the CNQDs can be simultaneously assembled on the surface of TiO₂ nanosheets in a highly dispersive way. The 0D/2D composite containing only 0.5% of CNQDs shows the optimized solar photocatalytic activity for the degradation of rhodamine B and 4-chlorophenol. More importantly, the 0D/2D composite exhibits a better solar photocatalytic activity than the bulk g-C₃N₄/TiO₂ nanosheets composite. This improvement can be ascribed to the close interfacial contact and strong interaction between the highly dispersed CNQDs and the TiO₂ nanosheets, which could lead to efficient separation of the photogenerated electron–hole pairs, provide more catalytic active sites, and enhance the absorption of solar light. The 0D/2D composite also shows good stability for its practical applications.     

Synthesis and facet-dependent photoreactivity of BiOCl single-crystalline nanosheets

BiOCl single-crystalline nanosheets with exposed {001} and {010} facets were selectively synthesized via a facile hydrothermal route. The resulting BiOCl single-crystalline nanosheets with exposed {001} facets exhibited higher activity for direct semiconductor photoexcitation pollutant degradation under UV light, but the counterpart with exposed {010} facets possessed superior activity for indirect dye photosensitization degradation under visible light.     

Polyhedral AgBr Microcrystals with an Increased Percentage of Exposed {111} Facets as a Highly Efficient Visible‐Light Photocatalyst

Synthesis of inorganic single crystals with exposed high‐reactivity facets is a desirable target in the catalytic chemistry field. Polyhedral AgBr microcrystals with an increased percentage of exposed high‐reactivity {111} facets have been successfully prepared for the first time, and the photocatalytic performance of these microcrystals when used as an AgBr/Ag plasmonic photocatalyst was investigated. The results indicate that the as‐prepared sample has high photocatalytic activity and, under the same measurement conditions, the photodegradation rate of methyl orange dye over these microcrystals is at least four times faster than with other shapes of AgBr/Ag microstructure, as well as 20 times faster than with the highly efficient Ag₃PO₄ photocatalyst. DFT calculations suggest that the AgBr (111) surface is mainly composed of unsaturated Ag atoms and has a relatively high surface energy, both of which are favorable for enhancing the photocatalytic activity of the AgBr/Ag polyhedron photocatalyst. This work not only provides a highly efficient plasmonic photocatalyst of polyhedral AgBr/Ag microcrystals with an increased percentage of exposed high‐reactivity AgBr {111} facets, but also demonstrates that the shape and crystalline quality of the exposed facets have an important influence on the photocatalytic activities.     

Co3O4纳米立方体的可控合成及其CO氧化反应性能

在乙醇和三乙胺的混合溶液中,采用溶剂热法制备了尺寸为10 nm的Co₃O₄立方体. 考察了钴盐前驱体和溶解氧对Co₃O₄纳米立方体结构的影响规律,通过对合成过程中不同阶段产物的结构分析和表征,提出了Co₃O₄纳米立方体的形成机制是溶解再结晶的过程. 将所制备的Co₃O₄纳米立方体在200 ℃焙烧处理后,尺寸和形貌均可保持稳定,但400 ℃焙烧后,变为球形纳米粒子. 这种主要暴露{100}晶面的Co₃O₄纳米立方体催化CO氧化反应的活性低于纳米粒子({111}晶面),验证了四氧化三钴纳米材料在CO氧化反应中的晶面效应.     

Growth and physical properties of single crystals of FeII2MoIV3O8

Crystals of hexagonal Fe₂Mo₃O₈ up to 3 × 3 × 2 mm were grown by chemical vapor transport from a starting mixture of composition Fe₂MoO₄. The morphology is {101}, {$\text{10}\text{2}$}, {110}, {$\text{00}\text{2}$}, {100} and corresponds to the absolute orientation of the polar z axis. Both magnetic susceptibility and electrical conductivity show considerable anisotropy. The compound orders antiferromagnetically at 59.5 K, with the spin along c. It is a low-conductivity semiconductor with activation energies 0.14 and 0.21 eV perpendicular and parallel to c, respectively.     

{111}晶面暴露对介孔金红石TiO2单晶光催化产氢的促进作用

光催化反应发生在半导体材料的表面,材料表面的原子/电子结构直接影响光催化剂的活性或选择性。因此,发展具有特定晶面的半导体光催化剂受到各国学者的普遍关注,被认为是调控光催化材料性能的有效途径之一。自2008年yang等首次合成高表面能{001}晶面占优的锐钛矿TiO2单晶以来,控制合成暴露不同晶面TiO2晶体的研究得到了迅猛的发展,已发展了多种方法合成了具有不同晶面的TiO2晶体。研究表明,选择性地暴露特定的活性晶面能够显著地提高光催化剂的活性或者改变光催化反应的选择性。但是,含有完整晶面构型的TiO2单晶样品的颗粒尺寸一般都较大,通常为几微米,因而显著增加了光生载流子传输与分离的难度,并且导致材料较小的比表面积,限制了对光催化活性的进一步提高。能否在合成含特定晶面单晶的同时增加多孔结构成为有效解决这一问题的关键。最近, Crossland等采用晶种模板法成功合成了介孔的锐钛矿TiO2单晶,并且通过光电器件研究证实了采用该思路可进一步提高材料的光电性能。金红石TiO2在光催化全分解水方面具有独特的优势,然而关于多孔单晶金红石TiO2的研究相对较少,尤其是合成热力学不稳定的高表面能{111}晶面完全暴露的多孔金红石单晶面临较大的技术挑战因而一直未见文献报道。本文利用晶种模板法,以TiCl4溶液为含Ti前驱体、NaF为形貌控制剂、采用水热处理制备出不同比例{111}晶面的介孔金红石单晶。我们前期工作表明, NaF可作为形貌控制剂合成低表面能{110)晶面占优的介孔金红石单晶。本文发现,通过改变NaF的添加量,可有效调变{111}/{110}晶面比例,最终合成完全暴露{111}高表面能的介孔金红石TiO2单晶。扫描电镜结果显示,当添加20 mg NaF时,合成{110}占优的具有高长径比的介孔晶体;当NaF用量增加到40 mg时{110}晶面进一步缩短;至80 mg时则制备出{111})高能面完全暴露的金红石TiO2晶体。值得注意的是,对比研究表明,不采用模板合成了与多孔晶体完全相对应的不同{111}/(110}晶面比例的实心金红石晶体。透射电镜及选区电子衍射以及结合X射线衍射进一步证实,多孔的金红石TiO2晶体与实心金红石单晶均都为单晶结构,孔结构贯穿于样品内部且具有较高的晶面结晶性。氮气吸附实验发现,虽然三个不同晶面比例介孔金红石单晶样品间的形貌具有显著的差异,但比表面积非常相近(分别为24,25,28 m2/g),孔径也都为50 nm左右,该值与所用SiO2模板球的直径以及TEM观察结果相一致。光催化产氢性能结果表明,选择性的暴露活性晶面显著提高了光催化活性,仅含高能面{111}的介孔金红石单晶样品具有最高的产氢速率(约800μmol h–1 g–1),比常规{110}晶面占优的介孔单晶样品速率提高了约一倍。尤其比实心单晶样品的产氢速率提高了至少一个数量级,这应归结于介孔结构特性所导致的表面反应活性位增加、电子传输距离缩短以及光吸收增强协同作用的结果。     

A Hydrogen Farm Strategy for Scalable Solar Hydrogen Production with Particulate Photocatalysts

Scalable solar hydrogen production by water splitting using particulate photocatalysts is promising for renewable energy utilization. However, photocatalytic overall water splitting is challenging owing to slow water oxidation kinetics, severe reverse reaction, and H₂/O₂ gas separation. Herein, mimicking nature photosynthesis, a practically feasible approach named Hydrogen Farm Project (HFP) is presented, which is composed of solar energy capturing and hydrogen production subsystems integrated by a shuttle ion loop, Fe³⁺/Fe²⁺. Well‐defined BiVO₄ crystals with precisely tuned {110}/{010} facets are ideal photocatalysts to realize the HFP, giving up to 71 % quantum efficiency for photocatalytic water oxidation and full forward reaction with nearly no reverse reaction. An overall solar‐to‐chemical efficiency over 1.9 % and a solar‐to‐hydrogen efficiency exceeding 1.8 % could be achieved. Furthermore, a scalable HFP panel for solar energy storage was demonstrated under sunlight outdoors.