Direct Observation of Ethanol Photocatalysis on Rutile TiO2(110) Surface

Photocatalytic dissociation of ethanol molecules on the rutile TiO₂(110) surface after UV irradiation has been investigated by scanning tunneling microscope at 80 K. Most of the ethanol molecules adsorb molecularly at Ti sites, similar to the case of methanol. After UV irradiation, two different protrusions of products were observed, one of them has been identified by the technique of tip manipulation, which was likely composed of an acetaldehyde in the middle and two bridge-bonded hydroxyls on both neighbored oxygen sites. Multi-time irradiation experiments have also been performed to further understand the relationship between the two protrusions and the process of ethanol photocatalytic dissociation. These results provide detailed insights into the photocatalysis of ethanol on rutile TiO₂(110), which would help us to understand how phtotocatalytic reactions of ethnaol proceed at the fundamental level.     

Effects of Oxygen Vacancy on the Adsorption of Formaldehyde on Rutile TiO2(110) Surface

Oxygen vacancy (O_v) has significant influence on physical and chemical properties of TiO₂ systems,especially on surface catalytic processes.In this work,we investigate the effects of O v on the adsorption of formaldehyde (HCHO) on TiO₂(110) surfaces through firstprinciples calculations.With the existence of O_v,we find the spatial distribution of surface excess charge can change the relative stability of various adsorption configurations.In this case,the bidentate adsorption at five-coordinated Ti (Ti_5c) can be less stable than the monodentate adsorption.And HCHO adsorbed in O_v becomes the most stable structure.These results are in good agreement with experimental observations,which reconcile the long-standing deviation between the theoretical prediction and experimental results.This work brings insights into how the excess charge affects the molecule adsorption on metal oxide surface.     

Active Sites for Adsorption and Reaction of Molecules on Rutile TiO2(110) and Anatase TiO2(001) Surfaces (cited: 1)

The reactivity of specific sites on rutile TiO₂(110)-(1×1) surface and anatase TiO₂(001)-(1×4) surface has been comparably studied by means of high resolution scanning tunneling microscopy. At the rutile TiO₂(110)-(1×1) surface, we find the defects of oxygen vacancy provide distinct reactivity for O₂ and CO₂ adsorption, while the terminal fivefold-coordinated Ti sites dominate the photocatalytic reactivity for H₂O and CH₃OH dissociation. At the anatase TiO₂(001)-(1×4) surface, the sixfold-coordinated terminal Ti sites at the oxidized surface seem to be inert in both O₂ and H₂O reactions, but the Ti-rich defects which introduce the Ti³⁺ state into the reduced surface are found to provide high reactivity for the reactions of O₂ and H₂O. By comparing the reactions on both rutile and anatase surfaces under similar experimental conditions, we find the reactivity of anatase TiO₂(001) is actually lower than rutile TiO₂(110), which challenges the conventional knowledge that the anatase (001) is the most reactive TiO₂ surface. Our findings could provide atomic level insights into the mechanisms of TiO₂ based catalytic and photocatalytic chemical reactions.     

Photoelectron Spectroscopic Study of Methanol Adsorbed Rutile TiO2(110) Surface

Methanol/TiO₂(110) is a model system in the surface science study of photocatalysis where methanol is taken as a hole capture. However, the highest occupied molecular orbital of adsorbed methanol lies below the valence band maximum of TiO₂, preventing the hole transfer. To study the level alignment of this system, electronic structure of methanol covered TiO₂(110) surface has been measured by ultraviolet photoelectron spectroscopy and the molecular orbitals of adsorbed methanol have been clearly identified. The results indicate the weak interaction between methanol and TiO₂ substrate. The static electronic structure also suggests the mismatch of the energy levels. These static experiments have been performed without band gap excitation which is the prerequisite of a photocatalytic process. Future study of the transient electronic structure using time-resolved UPS has also been discussed.     

TiO2表面羟基及其性质

TiO₂材料表面含有丰富的羟基基团，研究表面羟基的分布和性质对理解TiO₂的吸附和光催化作用本质有非常重要的意义。本文简要总结了国内外近年来关于TiO₂表明羧基的研究进展，如不同晶相结构TiO₂的表面羟基状态及不同晶面上羧基的种类、表面吸附水对羟基分布的影响、表面羟基的光电化学性质以及其在光催化反应中的作用等。最后对TiO₂表面羧基研究中存在的问题进行了分析。     

Reaction Intermediates on TiO2(110) Identified by Time-Lapse Scanning Tunneling Microscopy

The present account describes first time examples of scanning tunneling microscope (STM) visualization of reaction intermediates on a metal oxide surface. The topographic response of reactant-adsorbed TiO₂(110) surfaces to a temperature increment or to a pressure increment was monitored as a sequence of STM images. Acetates thermally decomposing to ketene were resolved in a temperature-jump STM observation. The kinetics of the acetate consumption was determined on the number of acetates resolved in the microscope images and agreed with the macroscopic rate law of ketene production. A pressure-jump study revealed how a chemisorbed carboxylate (RCOO^-) is exchanged by another carboxylate (R'COO^-) supplied from the ambient vapor phase. An impinging R'COOH was immobilized on the top of a RCOO^- and then squeezed itself into the monolayer of the RCOO^-. One of the carboxylates in the squeezed state returned to the vapor phase via the immobilized state.     

隧道结电场辅助下叔丁胺分子在Cu(111)表面跳跃(英文)

采用扫描隧道显微镜(STM)于78 K研究了单个叔丁胺分子在Cu(111)表面的横向跃迁现象.研究发现叔丁胺分子的跳跃几率随隧道电流的增加而线性增加,这表明该过程是单电子激发过程;在不同极性的隧道结电场作用下,叔丁基胺分子跳跃行为发生的几率不同,这种现象可以用电场辅助的扩散过程解释.在不同极性电场作用下叔丁胺分子在Cu(111)表面的吸附能和扩散势垒不同,从而表现出不同的跳跃几率.     

Coverage-dependent Orientations of Dy@C82 Molecules on Au(111) Surface

The adsorption and molecular orientation of Dy@C82 isomer I on Au(111) has been investi-gated using ultrahigh-vacuum scanning tunneling microscopy at 80 K. At low coverages, the Dy@C82 molecules tend to grow along the step edges of Au(111), forming small clusters and molecular chains. Adsorption of Dy@C82 on the edges is dominated by the fullerene-substrate interaction and presents various molecular orientations. At higher coverages, the Dy@C82 is found to form ordered islands consisting of small domains of equally oriented molecules. The Dy@C82 molecules in the islands prefer the adsorption configurations with the major C2 axis being approximately parallel to the surface of the substrate. Three preferable orientations of the Dy@C82 molecules are found in a two-dimensional hexagonal close packed overlayer. These observations are attributed to the interplay of the fullerene-substrate interaction and dipole-dipole interaction between the metallofullerenes.     

用分子轨道理论研究NO气体在TiO2表面吸附

根据一氧化氮(NO)气体在二氧化钛(TiO₂)表面吸附和脱附的实验结果, 揭示了气体脱附量的变化规律. 利用MOPAC 和GAUSSIAN分子轨道理论计算了在TiO₂(110)表面上吸附NO分子的原子簇模型, 电荷分布以及原子簇的能级, 推断了NO在TiO₂(110)表面吸附的稳定性.     

Direct View of Cr Atoms Doped in Anatase TiO2(001) Thin Film

Imaging the doping elements is critical for understanding the photocatalytic activity of doped TiO₂ thin film. But it is still a challenge to characterize the interactions between the dopants and the TiO₂ lattice at the atomic level. Here, we use high angle annular dark-field/annular bright-field scanning transmission electron microscope (HAADF/ABF-STEM) combined with electron energy loss spectroscopy (EELS) to directly image the individual Cr atoms doped in anatase TiO₂(001) thin film from [100] direction. The Cr dopants, which are clearly imaged through the atomic-resolution EELS mappings while can not be seen by HADDF/ABF-STEM, occupy both the substitutional sites of Ti atoms and the interstitial sites of TiO₂ matrix. Most of them preferentially locate at the substitutional sites of Ti atoms. These results provide the direct evidence for the doping structure of Cr-doped A-TiO₂ thin film at the atomic level and also prove the EELS mapping is an excellent technique for characterizing the doped materials.     

Interaction of CO and 02 with Supported Pt Single-Atoms on TiO2(110)

In view of the high activity of Pt single atoms in the low-temperature oxidation of CO, we investigate the adsorption behavior of Pt single atoms on reduced rutile TiO\begin{document}$ _2 $\end{document}(110) surface and their interaction with CO and O\begin{document}$ _2 $\end{document} molecules using scanning tunneling microscopy and density function theory calculations. Pt single atoms were prepared on the TiO\begin{document}$ _2 $\end{document}(110) surface at 80 K, showing their preferred adsorption sites at the oxygen vacancies. We characterized the adsorption configurations of CO and O\begin{document}$ _2 $\end{document} molecules separately to the TiO\begin{document}$ _2 $\end{document}-supported Pt single atom samples at 80 K. It is found that the Pt single atoms tend to capture one CO to form Pt-CO complexes, with the CO molecule bonding to the fivefold coordinated Ti (Ti\begin{document}$ _{5 \rm{c}} $\end{document}) atom at the next nearest neighbor site. After annealing the sample from 80 K to 100 K, CO molecules may diffuse, forming another type of complexes, Pt-(CO)\begin{document}$ _2 $\end{document}. For O\begin{document}$ _2 $\end{document} adsorption, each Pt single atom may also capture one O\begin{document}$ _2 $\end{document} molecule, forming Pt-O\begin{document}$ _2 $\end{document} complexes with O\begin{document}$ _2 $\end{document} molecule bonding to either the nearest or the next nearest neighboring Ti\begin{document}$ _{5 \rm{c}} $\end{document} sites. Our study provides the single-molecule-level knowledge of the interaction of CO and O\begin{document}$ _2 $\end{document} with Pt single atoms, which represent the important initial states of the reaction between CO and O\begin{document}$ _2 $\end{document}.     

一维TiO2锐钛矿/金红石异相结的制备及光催化降解甲醛性能

TiO₂异相结主要通过高温方法制备,所制备材料的形貌和组成较难控制,尤其是在较低温度下一步制备一维TiO₂异相结仍具有一定的挑战性。采用简单、方便的一步水热法,在较低温度下(180℃)制备了一维纳米TiO₂异相结材料。X射线衍射(XRD)和高分辨透射电镜(HRTEM)分析表明,制备的材料以一维金红石相TiO₂纳米棒(长度：(400±50) nm,直径：(60±5) nm)为基本结构,粒径分布均匀的锐钛矿相TiO₂纳米粒子(直径：(9.5±0.5) nm)高密度、单分散地负载在纳米棒上。通过控制水热反应时间成功调控了异相结中锐钛矿相TiO₂的含量(20%～50%),进而实现了其光催化降解HCHO性能的调控。实验结果表明,当锐钛矿相TiO₂的含量为33%时(TiO₂-24,水热时间24 h制备的样品),异相结光催化剂表现出最佳的HCHO降解性能：在低光强LED灯(波长为365 nm,光强为12.26 mW·cm     

水对甲醇在Rutile-TiO2(110)-(1 ×1)表面光催化解离的影响简

采用程序升温脱附方法研究了甲醇分子吸附在真空退火后的二氧化钛（110）表面的光催化过程,对比分析了单独吸附甲醇分子以及甲醇分子与水分子共吸附情况下的光催化解离过程. 结果表明,在二氧化钛（110）表面吸附的甲醇分子对共吸附水分子的光催化解离过程并没有直接的帮助作用. 共吸附状态下的水分子也同样没有影响到甲醇的光致解离过程,但是水分子的存在抑制了甲醇光解产物甲醛的光致脱附过程,同时促进了甲酸甲酯的形成.     

金红石相TiO2纳米棒的氢化处理及其光催化活性

以钛酸四丁酯为钛源,通过盐酸调制的水热法制备出了具有棒状结构的金红石相纳米TiO₂,并进一步进行高温氢化处理. 采用X射线衍射（XRD）,透射电镜（TEM）,紫外-可见-近红外漫反射（UV-Vis-NIR DRS）,电子顺磁共振（EPR）和表面光伏（SPS）等测试手段对样品进行表征,以气相乙醛和液相苯酚为目标污染物考察催化剂的光催化活性. 结果表明：随着高温氢化处理时间的延长,TiO₂样品的可见光吸收逐渐增强,其颜色逐渐由白色转变成灰色,这主要与引入的Ti³⁺/氧空位缺陷有关. 表面光电压谱和羟基自由基测试表明,适当时间的氢化处理有利于光生电荷的分离. 在光催化氧化降解气相乙醛和液相苯酚过程中,经适当时间氢化处理的样品表现出高的可见光催化活性. 并且可见光催化活性的规律与紫外光下的是一致的. 这是因为氢化处理后在导带底下方引入了缺陷能级,拓展了可见光响应. 过度的氢化处理会在TiO₂导带下方引入较低的缺陷能级,使光生电荷的复合加剧,导致光催化活性降低.     

Effects of Surface Defects on Adsorption of CO and Methyl Groups on Rutile TiO2(110)

The interaction of reactants with cata-lysts has always been an important sub-ject for catalytic reactions.As a promis-ing catalyst with versatile applications,...     

Excitation Wavelength Dependence of Photocatalyzed Oxidation of Methanol on TiO2(110)

Post-irradiation temperature-programmed desorption (TPD) has been used to study the photocatalyzed oxidation of methanol on TiO₂(110) surface under the irradiation of 360, 380 and 400 nm light. The photocatalytic process initiated by ultraviolet light of different wavelength are similar. Methanol has been photocatalytically converted into formaldehyde, and the released hydrogen atoms transfer to the neighboring twofold coordinated oxygen to form bridging hydroxyls. The reaction rate, however, is strongly wavelength dependent. The reaction rate under 360 nm light irradiation is 4.8 times of that in the case of 400 nm exposure, consistent with a previous femtosecond time-resolved absorption measurement on TiO₂ which shows the faster charge carrier recombination in the near-band-gap than the over-band-gap excitation. So far, the underlying factors which govern the excitation wavelength dependence of photocatalytic activity of TiO₂ and other photocatalysts remain unclear, and future studies are needed to address this important issue.     

Characterization of the Excited State on Methanol/TiO2(110) Interface (cited:2)

The electronic structure of methanol/TiO₂(110) interface has been studied by photoemission spectroscopy. The pronounced resonance which appears at 5.5 eV above the Fermi level in two-photon photoemission spectroscopy (2PPE) is associated with the photocatalyzed dissociation of methanol at vefold coordinated Ti sites (Ti_5c) on TiO₂(110) surface [Chemical Science 1, 575 (2010)]. To check whether this resonance signal arises from initial or intermediate states, photon energy dependent 2PPE and comparison between one-photon photoemission spectroscopy and 2PPE have been performed. Both results consistently suggest the resonance signal originates from the initially unoccupied intermediate states, i.e., excited states. Dispersion measurements suggest the excited state is localized. Time-resolved studies show the lifetime of the excited state is 24 fs. This work presents comprehensive characterization of the excited states on methanol/TiO₂(110) interface, and provides elaborate experimental data for the development of theoretical methods in reproducing the excited states on TiO₂ surfaces and interfaces.     

SO42-改性后的TiO2(锐钛和/或金红石)表面上MoO3的分散性质研究

采用红外(IR)、拉曼(Raman)、X-射线衍射(XRD)、程序升温还原(TPR)等方法考察了经硫酸根改性后的金红石(SR)与锐钛矿(SA)的混合比例变化时的负载型催化剂，MoO₃ / TiO₂(SR+SA)，的一些物理化学性质(如活性组分MoO₃的分散行为、表面酸碱性、氧化还原性)的变化规律。结果表明：对于MoO₃ / TiO₂(SR+SA)样品，低含量MoO₃表面分散时倾向于优先与混合载体中的改性金红石(SR)发生作用；TiO₂载体表面SO₄^2-的存在，使得载体表面产生了新的酸性位，导致样品中表面分散的钼物种主要以聚合八面体状态存在。     

Suppression of Photoinduced BBO Defects Generation on TiO2(110) by Water (cited: 1)

We have investigated creation of variable concentrations of defects on TiO₂(110)-(1×1) sur-face by 266 nm laser using temperature programmed desorption technique. Oxygen-vacancy defects can be easily induced by ultraviolet light, the defects concentration has a linear dependence on power density higher than 50 mW/cm² for 90 s irradiation. No observa-tion of O₂ molecule and Ti atom desorption suggests that UV induced defects creation on TiO₂(110)-(1×1) is an effective and gentle method. With pre-dosage of thin films of water,the rate of defects creation on TiO₂(110)-(1×1) is slower at least by two orders of magnitude than bare TiO₂(110)-(1×1) surface. Further investigations show that water can be moreeasily desorbed by UV light, and thus desorption of bridging oxygen is depressed.     

TiO2颗粒在羟基表面的沉积行为及图案化

比较了3种具有羟基表面SiO2层的差异:紫外光照SAMs形成的羟基表面,紫外光照射前、照射后的羟基表面;用光照前后表面的差异,结合化学浴沉积技术在单晶硅基底上制得了TiO2微图案薄膜。系统考察了光源、硅片表面性质的变化、溶液等方面对图案生成的影响。实验表明TiO2沉积在未照区,电子和空穴动力学上的差异造成光照区表面正电荷增多,抑制了TiO2的沉积。该方法不需要光刻胶和自组装膜作为辅助模板,具有简单廉价的特点。