GRAFTING OF SULFOBETAINE ONTO A POLYURETHANE SURFACE TO IMPROVE BLOOD COMPATIBILITY

On the molecular level, it is believed that polymers containing zwitterionic structures should be compatible withblood. In this work polyurethane films were grafted with sulfobetaine by a three-step procedure. In the first step, the films'surfaces were treated with hexamethylene diisocyanate (HDI) in toluene at 50℃ in the presence of di-n-butyl tin dilaurate(DBTDL) as a catalyst. The extent of the reaction was monitored by ATR-IR spectra; a maximum number of free NCOgroups was obtained after a reaction time of 90 min. In the second step, the hydroxyl groups of N,N-dimethylethylethanolamine (DMEA) were allowed to react in toluene with NCO groups bound on the surface. In the thirdstep, sulfobetaines were formed on the surface through the ring-opening reaction between tertiary amine of DMEA and 1,3-propanesultone (PS). The surfaces of the films were characterized by ATR-IR and XPS showing that the grafted surfaceswere composed of sulfobetaine. The results of the contact angle measurement show that the surface was strongly hydrophilic.The platelet adhesion test demonstrated that the films grafted with sulfobetaine have excellent blood compatibility.     

Plasma modification of polypropylene surfaces and grafting copolymerization of styrene onto polypropylene

The surface of polypropylene(iPP) is modified with glow discharge plasma of Ar,so that the modified surfaces of iPP films are obtained.The studies of scanning electron microscopy(SEM) show the surface etching pattern of iPP films. The chemical structures of iPP films are confirmed by X-ray photoelectron spectroscopy(XPS) and Fourier transform infrared(FTIR) spectroscopy.The wetting properties of modified surfaces of iPP films are characterized by contact angle, and the free energy of surfaces is calculated.The free radical of modification surfaces of iPP is measured by chemical method.The surfaces of iPP are achieved with Ar plasma treatment followed by grafting copolymerization with styrene(St) in St.The grafting polymer of St onto iPP is characterized by FTIR.The grafting rate is dependent on plasma exposure time and discharge voltage.The studies show that homopolymerization of St is undergone at the same time during the grafting-copolymerization of St onto iPP.     

SURFACE MODIFICATION OF POLYPROPYLENE MICROPOROUS MEMBRANE BY TETHERING POLYPEPTIDES

Two kinds of polypeptides were tethered onto the surface of polypropylene microporous membrane （PPMM） through a ring opening polymerization of L-glutamate N-carboxyanhydride initiated by amino groups which were introduced by ammonia plasma and y-aminopropyl triethanoxysilane treatments. X-ray photoelectron spectroscopy （XPS）, attenuated total reflectance Fourier transform infrared spectroscopy （FT-IR/ATR）, scanning electron microscopy （SEM）, together with water contact angle measurements were used to characterize the modified membranes. XPS analyses and FT-IR/ATR spectra demonstrated that polypeptides are actually grafted onto the membrane surface. The wettability of the membrane surface increases at first and then decreases with the increase in grafting degrees of polypeptide. Platelet adhesion and murine macrophage attachment experiments reveal an enhanced hemocompatibility for the polypeptide modified PPMMs. All these results give evidence that polypeptide grafting can simultaneously improve the hemocompatibility as well as reserve the hydrophobicity for the membrane, which will provide a potential approach to improve the performance of polypropylene hollow fiber microporous membrane used in artificial oxygenator.     

SURFACE OF GELATIN MODIFIED POLY(L-LACTIC ACID)FILM

In this paper, the surface structure of poly(L-lactic acid) (PLLA) film modified with gelatin was investigated. ThePLLA film specimens were treated directly with aqueous alkali solution to provide their surfaces with carboxyl groups, sothat these functional groups could become the reactive sites for gelatin immobilization. The functional groups of the PLLAfilms were identified by ATR-FTIR spectra and XPS spectra, the changes in surface morphology were observed by usingenvironmental scanning electron microscopy (ESEM), and the hydrophilicity of modified PLLA films was examined bywater contact angle measurement. Experimental results showed that the gelatin was immobilized with water-solublecarbodiimide (EDC) onto the PLLA film's surfaces, and the gelatin content on the polymer surface was related to carboxylicgroup formed in the controlled hydrolysis process. Rough surfaces caused by hydrolysis will predominantly favor the adhesion and growth of cell; and the hydrophilicity of these surfaces after the modification procedure is enhanced.     

Improving hydrophilicity and protein antifouling of electrospun poly(vinylidenefluoride-hexafluoropropylene) nanofiber membranes

<正>Poly(vinylidenefluoride-hexafluoropropylene)(PVDF-HFP) nanofiber membranes with improved hydrophilicity and protein fouling resistance via surface graft copolymerization of hydrophilic monomers were prepared.The surface modification involves atmospheric pressure glow discharge plasma(APGDP) pretreatment followed by graft copolymerization of poly(ethylene glycol) methyl ether methacrylate(PEGMA).The success of the graft modification with PEGMA on the PVDF-HFP fibrous membrane is ascertained by X-ray photoelectron spectroscopy(XPS) and attenuated total reflectance Fourier transform infrared measurements(ATR-FTIR).The hydrophilic property of the nanofiber membranes is assessed by water contact angle measurements.The results show that the PEGMA grafted PVDF-HFP nanofiber membrane has a water contact angle of 0°compared with the pristine value of 132°.The protein adsorption was effectively reduced after PEGMA grafting on the PVDF-HFP nanofiber membrane surface.The PEGMA polymer grafting density on the PVDF-HFP membrane surface is measured by the gravimetric method,and the filtration performance is characterized by the measurement of water flux.The results indicate that the water flux of the grafted PVDF-HFP fibrous membrane increases significantly with the increase of the PEGMA grafting density.     

一种荷叶效应涂层的制备

Composite coatings with lotus effect were fabricated via imbedding micro-silica and then nano-silica. The micro-silica and nano-silica was subsquently fixed on the surface to form hierarchical micro- and nano-structures, and at the same time, the epoxy resin modified by low surface free energy material was coated on the coatings. The staic contact angle of the coatings is as high as 165° and the tilt angle for 6.5 μL water droplet is as low as 2.5°. The coatings show the similar hydrophobic capability and structure to lotus leaves.     

Hydrolytic Degradation Behaviors of Poly（p-dioxanone） in Ambient Environments

The effects of temperature and relative humidity on the hydrolytic degradation of poly（p-dioxanone）（PPDO） were investigated. The hydrolytic degradation behaviors were monitored by tracing the changes of water absorption, mechanical and crystalline properties, molecular weight and its distribution, surface morphologies, as well as infrared absorption peaks and hydrogen chemical shifts during the degradation. It is found that the water absorption increases whilst the intrinsic viscosity, tensile strength and elongation at break decrease as the temperature or relative humidity increases. With degradation time growing, the molecular weight drops and its distribution broadens. The crystallinity of PPDO has a tendency to increase at first and then to decrease, while the crystalline structure is not significantly changed. At the same time, some cracks are observed on the surface and keep growing and deepening. All results show that temperature plays more significant roles than relative humidity during the degradation. The analyses of Fourier transform infrared spectroscopy and hydrogen nuclear magnetic resonance spectroscopy reveal that the degradation of PPDO is a predominant hydrolysis of ester linkages.     

Balance of polyacrylate-fluorosilicone block copolymers as icephobic coatings

Polyacrylate-fluorosilicone block copolymers, namely, polyacrylate-b-polydimethylsiloxane and polyacrylate-bpolymethyltrifluoropropylsiloxane were synthesized for fabricating icephobic coatings. The surface morphology and chemical composition of the block copolymers were characterized by atomic force microscopy and X-ray photoelectron spectroscopy, suggesting that the fluorosilicone blocks aggregated on the top of the copolymer surfaces. Results of water contact angles and ice shear strength demonstrated a certain amount adding of methacryloisobutyl polyhedral oligomeric silsesquioxane could lead to the decrease of contact angle hysteresis and increase of surface roughness, consequently resulting in significant reduction of the ice adhesion strength. Therefore, the block copolymers with the combined advantages of silicone and fluoropolymers could be potentially applied as icephobic coatings.     

PREPARATION AND SURFACE PROPERTIES OF ACRYLIC COPOLYMERS CONTAINING FLUORINATED MONOMERS

A series of copolymers comprising butylmethacrylate, styrene, butylacrylate, hydroxypropyl acrylate and perfluoroalkyl methacrylate were synthesized by the free radical polymerization using BPO as an initiator. The surface property of the copolymer films was subsequently characterized. The contact angle measurements and energy dispersive analysis of X-ray （EDAX） show that the length and content of perfluoroalkyl side chains in the copolymers are crucial for the preparation of the film with low surface energy. At a given content of fluorinated monomers in the copolymers, the longer the perfluoroalkyl side chain, the larger the water contact angle of the copolymer films will be. On the other hand, the higher the content of fluorinated monomers, the lower the surface energy is. The water contact angle increases with the increase of the fluorinated monomer content and reaches a plateau at 3 wt% of fluorinated monomer content.     

Biomimetic surface preparation of inert polymer films via grafting long monoalkyl chain phosphatidylcholine

To explore construction of novel mimicking biomembrane on biomaterials surfaces,a new polymerizable phosphatidylcholine containing a long monoalkyl chain ended with acryl group(AASOPC) was designed and synthesized, which was easily derived from the terminal amino group of 9-(2-amino-ethylcarbamoyl)-nonyl-1-phosphatidyl-choline (ASOPC) reacting with acryloyl chloride.The obtained AASOPC was grafted on poly(ethylene terephthalate)(PET) via surface-initiated atom-transfer radical polymerization(SI-ATRP) to form mimicking biomembrane.These modified surface structures of PET were investigated using water contact angle(WAC),X-ray photoelectron spectroscopy(XPS) and atomic force microscopy(AFM).The results indicated that the new mimicking phosphatidylcholine biomembrane could be prepared on inert polymer surfaces by using the acryloyl phosphatidylcholine(AASOPC) via surface-initiated atom transfer radical polymerization(SI-ATRP).     

Surface Energy and Wettability of Plasma-treated Polyacrylonitrile Fibers

Polyacrylonitrile fibers were treated with a nitrogen glow-discharge plasma. The surfaces of untreated and treated fibers were examined with contact angle measurements, atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). Surface energy calculations of the fibers were carried out from contact angle measurements using the relationships developed by Fowkes. It is found that plasma treatment causes a reduction in water contact angle on the fiber surfaces. The dispersion component of surface energy changes slightly, while the polar component is increased significantly from 14.6 mN/m to 58.7 mN/m and the total surface energy increase is 139%. The increase of surface energy is mainly caused by the introduction of hydrophilic groups on the fiber surfaces after plasma treatment.     

Surface structures and properties of polystyrene/poly(methyl methacrylate) blends and copolymers

Sum frequency generation (SFG) vibrational spectroscopy has been applied to study the molecular surface structures of polystyrene (PS)/poly(methyl methacrylate) (PMMA) blends and the copolymer between PS and PMMA (PS-co-PMMA) in air, supplemented by atomic force microscopy (AFM) and contact angle goniometer. Both the blend and the copolymer have equal weight amounts of the two components. SFG results show that both components, PS and PMMA, can segregate to the surface of the blend and the copolymer before annealing, although PMMA has a slightly higher surface tension. Upon annealing both SFG results and contact angle measurements indicate that the PS segregates to the surface of the PS/PMMA blend more but no change occurs on the PS-co-PMMA surface. AFM images show that the copolymer surface is flat but the 1:1 PS/PMMA blend has a rougher surface with island like domains present. The annealing effect on the blend surface morphology has also been investigated. We collected amide SFG signals from interfacial fibrinogen molecules at the copolymer or blend/protein solution interfaces as a function of time. Different time-dependent SFG signal changes have been observed, showing that different surfaces of the blend and the copolymer mediate fibrinogen adsorption behavior differently.     

聚甲基戊烯膜式氧合器表面碳酸酐酶的固定化及性能研究

聚甲基戊烯(PMP)膜式氧合器表面先用水等离子体改性,以引入羟基官能团;再以溴化氰为偶联剂,将碳酸酐酶(CA)偶联至其表面.改性后用X射线光电子能谱(XPS)、表面接触角及酶活性测定等方法研究PMP表面性能变化.结果表明,等离子体处理后,在PMP表面引入了大量的含氧官能团,与水的表面接触角从103.37°降低至50.01°.再将CA引入PMP表面后,与水的表面接触角进一步降低至39.23°;XPS的C1谱图中出现蛋白质的特征峰;以对硝基苯酚乙酸酯为底物,测得表面接枝CA的活性达到理论单分子层接枝活性的73%.改性后PMP表面物理化学性质的变化证明本文方法确实能成功地将羟基官能团、CA引入其表面.本方法有望应用在膜式氧合器上以提高其清除血液中CO2的能力.     

Improved cellular adhesion to acetone plasma modified polystyrene surfaces

The plasma polymerization of acetone has been used to modify polystyrene substrates for the controlled growth of human fibroblast cells. The surface modified polystyrene was studied by X-ray photoelectron spectroscopy, water contact angle and atomic force microscopy. This showed the surface oxygen levels and wettability to increase rapidly with exposure to the acetone plasma. High-resolution XPS allowed the determination of the relative amounts of surface hydroxyl, carbonyl and carboxyl groups. This showed that there was little incorporation of carboxyl groups in the deposited films. AFM measurements revealed the films to be conformal with a surface roughness equivalent to that of the underlying polystyrene substrate with film growth rates of approximately 0.5 nm min(-1). High edge-definition patterns were produced with a simple masking procedure and allowed the confinement of cells to selected areas of the substrate. These chemically patterned surfaces allowed the study of cells confined to particular regions of the substrate as a function of incubation time.     

低能量链端对聚苯乙烯薄膜铺展和润湿行为的影响

通过低能量功能端基的表面富集作用,研究了聚苯乙烯（ＰＳ）薄膜在聚甲基丙烯酸甲酯（ＰＭＭＡ）表面上的铺展和润湿动力学．用光学显微镜跟踪了ＰＳ薄膜的润湿行为,并对高分子熔体膜中非连续部分尺寸的增大速率进行了测定．分别用ＸＰＳ和ＡＦＭ对ＰＳ薄膜的表面组成和ＰＳ液滴的平衡接触角进行了测定．发现具有低表面能的氟碳端基在薄膜表面富集使ＰＳ薄膜的表面张力下降,并使ＰＳ液滴在ＰＭＭＡ表面上的平衡接触角减小,从而使高分子熔体膜中非连续部分尺寸的增长速率下降,得到了与液液界面铺展和润湿理论一致的实验结果．     

苯乙烯/甲基丙烯酸和苯乙烯/甲基丙烯酸(β-羟丙酯)嵌段共聚物的表面动态行为

通过测定表面动态接触角研究了两亲性的苯乙烯／甲基丙烯酸嵌段共聚物（ＰＳ ｂ ＰＭＡＡ）和苯乙烯／甲基丙烯酸（β 羟丙酯）嵌段共聚物（ＰＳ ｂ ＰＨＰＭＡ）的表面动态行为及温度、嵌段长度比等因素对其值的影响,讨论了聚合物表面当接触介质改变时链段或基团的再取向行为和表面性质     

Stability of polycarbonate and polystyrene surfaces after hydrophilization with high intensity oxygen RF plasma

A general drawback observed with plasma treatment is the limited stability of the hydrophilic-treated surfaces toward washing, storage, or heating. It has recently been found that oxygen, air, or argon radiofrequency plasmas with higher intensities than normally used can give hydrophilic surfaces having good wash stability. High intensity oxygen plasma treatment of polystyrene and polycarbonate surfaces was therefore carried out using two different capacitively coupled RF reactors with internal shelf electrodes. The obtained surface characteristics and stability were evaluated using contact angle measurements, XPS, AFM, and nanoindentation. For both materials, low water contact angles were found to correlate with high surface oxygen content. Only the surfaces exposed to relatively intense treatments, with self-bias voltages above 140 V (polystyrene) or 240 V (polycarbonate), could withstand washing in ethanol and remain highly hydrophilic. Substantial amounts of nonsoluble material were observed on the plastic substrates after treatment. Furthermore, for polycarbonate Young's modulus of the surface was found to increase with increasing intensity of the plasma. These observations were taken as an indication that extensive cross-linking of the surface layer took place. After more than 6 months of storage, the samples treated with the most intense plasmas (self-bias voltages in the range of 480-600 V) still had water contact angles around 20 degrees .     

Surface modification of EPDM rubber by plasma treatment

The effect of argon, oxygen, and nitrogen plasma treatment of solvent cast EPDM rubber films has been investigated by means of atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and surface energy measurements. Plasma treatment leads to changes in the surface energy from 25 to 70 mN/m. Treatment conditions influenced both the changes in surface energy and the stability, and it became more difficult to obtain good contact angle measurements after longer (> ca. 4 min) treatment times, probably because of an increasingly uneven surface structure. XPS analyses revealed that up to 20 at. % oxygen can be easily incorporated and that variations of approximately 5% can be controlled by the plasma conditions. Oxygen was mainly found in hydroxyl groups, but also as carbonyl and carboxyl. XPS analyses showed more stable surfaces than expected from contact angles, probably because XPS analysis is less surface sensitive than contact angle measurements. AFM measurements revealed different surface structures with the three gases. The surface roughness increased generally with treatment time, and dramatic changes could be observed at longer times. At short times, surface energy changes were much faster than the changes in surface structure, showing that plasma treatment conditions can be utilized to tailor both surface energies and surface structure of EPDM rubber.     

XPS研究低温等离子体聚苯乙烯表面改性

用氮气、二氧化碳和空气等离子体技术处理聚苯乙烯表面 ,并用X光电子能谱 (XPS)测定了聚合物表面的元素组成 ,相对含量和表面功能团的类型 .结果表明 ,经过不同条件处理后的聚合物表面引入了含氮和含氧基团 ,这对改善材料的沾润性和粘着性将起着明显作用 ;另外 ,不同处理条件对PS表面的氮、氧含量有很大影响     

聚对苯二甲酸乙二酯膜的表面碳氟等离子体改性及XPS取样深度与接触角间的关系

高聚物界面的能量、结构等性质，对理论研究和实际应用都是极为重要的．因为许多聚合物材料都具有一个或多个界面的多相结构，这些界面的结构和强度等，显著地影响着这些多相材料的物理、力学性能等，而它们之间的关系，是一个极为复杂的问题，只有综合界面科学、流变学、...