Ni含量对Co_(1-x)Ni_xB催化水解放氢性能的影响(英文)

采用化学还原法以乙醇为溶剂在冰水浴中合成了一系列Co1-xNixB合金催化剂,研究了该系列合金不同Ni含量对NaBH4水解放氢性能的影响.X射线衍射(XRD),扫描电镜(SEM)和透射电镜(TEM)显示Co1-xNixB合金是纳米非晶态颗粒.放氢测试表明Co1-xNixB具有很高的催化活性.放氢速率先随着Ni含量的增加而增大,并在x=0.15时放氢速率达到最大值,然后随x值的增加而减小.298K时Co0.85Ni0.15B合金催化碱性硼氢化钠水解的最大放氢速率可达4228mL·min-1·g-1,CoB和Co0.85Ni0.15B合金催化放氢的活化能分别为34.25和31.87kJ·mol-1.因此以乙醇为溶剂合成的Co1-xNixB合金具有较高的催化活性.     

Utilization of smart hydrogel-metal composites as catalysis media

Various metal nanoparticles such as, Cu, Co, Ni, and Fe were prepared inside poly(1-vinyl imidazole) p(VI) hydrogel by the absorption of the corresponding metal ions from aqueous solutions and the reduction with suitable reducing agents such as NaBH(4) and/or NaOH. TGA and ICP-AES were used to determine the metal particle content of p(VI)-M (M: Cu, Co, and Ni) composites. The prepared hydrogel-metal nanoparticle composites were proven to be resourceful as reaction container for the catalysis of various organic reactions. It was illustrated that p(VI)-M hydrogel-metal composites can be successfully used in the hydrolysis of NaBH(4) for the generation hydrogen form NaBH(4) and NH(3)BH(3). Additionally, p(VI)-M composites were also illustrated in the catalysis of different organic reactions; e.g., these hydrogel-M are very effective in the reduction nitro aromatic compounds such 2-nitrophenol (2-NP) and 4-nitrophenol (4-NP) to their corresponding amine forms in the presence of aqueous NaBH(4). Various parameters in the catalysis of hydrogen production and 4-NP reduction were determined.     

A comparative study on textural characterization: cation-exchange and sorption properties of crystalline alpha-zirconium(IV), tin(IV), and titanium(IV) phosphates

Tetravalent metal phosphates (M=Zr, Ti, and Sn) were prepared and characterized by XRD, surface properties, and TG-DTA. The cation exchange and sorption behavior of these metal phosphates toward transition metal ions such as Cu(2+), Co(2+), and Ni(2+) have been studied comparatively as a function of temperature and concentration. The adsorption process was found to increases with increase in temperature and concentration. The selectivity order for alpha-titanium and alpha-tin phosphates is Cu(2+)>Co(2+)>Ni(2+), whereas for alpha-zirconium phosphate it is Cu(2+)>Ni(2+)>Co(2+). The ion exchange capacity of alpha-titanium phosphate is greater than those of other phosphates, which is explained on the basis of the surface behavior, disorderness of the system, degree of hydrolysis of incoming guest adsorbate metal ions, and structural steric hindrance of the exchangers during adsorption and sorption. The distribution coefficient, Gibbs free energy, enthalpy, and entropy values indicate that the ion-exchange processes are spontaneous.     

多孔碳负载镍纳米颗粒的制备及催化氨硼烷水解制氢

合成了蜂窝状的分级多孔碳,并以多孔碳为载体通过浸渍-化学还原法制备碳载镍(Ni/C)作为催化氨硼烷水解制氢的催化剂。采用XRD、BET、SEM、Raman、TEM等手段对样品进行了表征并研究了Ni/C室温催化性能。结果显示,多孔碳比表面积高达737 m2·g-1,具有部分石墨化结构;负载的非晶态镍纳米颗粒平均粒径约为10 nm,均匀分布在碳基材。碳载镍对氨硼烷水解反应具有良好的催化活性,镍负载量为30wt%时催化性能最佳,298 K温度下放氢速率达到1 304.67 m L·min-1·g-1,活化能为29.1 k J·mol-1,并且具备一定的催化稳定性,表明Ni/C可作为一种廉价高效的催化剂应用于催化氨硼烷水解制氢。     

多孔碳负载镍纳米颗粒的制备及催化氨硼烷水解制氢

合成了蜂窝状的分级多孔碳,并以多孔碳为载体通过浸渍-化学还原法制备碳载镍(Ni/C)作为催化氨硼烷水解制氢的催化剂。采用XRD、BET、SEM、Raman、TEM等手段对样品进行了表征并研究了Ni/C室温催化性能。结果显示,多孔碳比表面积高达737 m²·g^-1,具有部分石墨化结构;负载的非晶态镍纳米颗粒平均粒径约为10 nm,均匀分布在碳基材。碳载镍对氨硼烷水解反应具有良好的催化活性,镍负载量为30wt%时催化性能最佳,298 K温度下放氢速率达到1 304.67 mL·min^-1·g^-1,活化能为29.1 kJ·mol^-1,并且具备一定的催化稳定性,表明Ni/C可作为一种廉价高效的催化剂应用于催化氨硼烷水解制氢。     

Chemometric analysis of voltammetric data on metal ion binding by selenocystine

The behavior of selenocystine (SeCyst) alone or in the presence of various metal ions (Bi(3+), Cd(2+), Co(2+), Cu(2+), Cr(3+), Ni(2+), Pb(2+), and Zn(2+)) was studied using differential pulse voltammetry (DPV) over a wide pH range. Voltammetric data matrices were analyzed using chemometric tools recently developed for nonlinear data: pHfit and Gaussian Peak Adjustment (GPA). Under the experimental conditions tested, no evidence was found for the formation of metal complexes with Bi(3+), Cu(2+), Cr(3+), and Pb(2+). In contrast, SeCyst formed electroinactive complexes with Co(2+) and Ni(2+) and kinetically inert but electroactive complexes with Cd(2+) and Zn(2+). Titrations with Cd(2+), Co(2+), Ni(2+), and Zn(2+) produced data that were reasonably consistent with the formation of stable 1:1 M(SeCyst) complexes.     

原位合成钴/还原氧化石墨烯纳米粒子催化氨硼烷制氢

采用简单的原位还原合成方法,利用具有温和还原性能的氨硼烷作为还原剂,在室温下一步还原氧化石墨烯和氯化钴混合溶液制备了还原氧化石墨烯负载钴纳米复合材料催化剂. 利用所制备的钴/还原氧化石墨烯催化剂催化氨硼烷水解制氢,发现钴/还原氧化石墨烯具有优异的催化性能. 相对于没有负载的钴纳米粒子以及采用硼氢化钠作为还原剂制备的钴/还原氧化石墨烯催化剂,采用氨硼烷还原制备的钴/还原氧化石墨烯催化剂表现出更加优越的催化性能. 动力学测试表明,钴/还原氧化石墨烯催化氨硼烷水解反应为零级反应,同时钴/还原氧化石墨烯催化剂催化氨硼烷水解反应的活化能为27.10 kJ·mol^-1,低于大部分已报道的其它催化剂,甚至一些贵金属催化剂的活化能. 钴/还原氧化石墨烯催化剂有着稳定的循环使用性,特别是其具有的磁性使得它能够直接从溶液中通过磁力回收,极具应用前景. 这种简单有效的合成方法有望推广到其它的金属-还原氧化石墨烯纳米复合材料体系.     

Highly sensitive and fast responsive fluorescence turn-on chemodosimeter for Cu2+ and its application in live cell imaging

A rhodamine B derivative 4 containing a highly electron-rich S atom has been synthesized as a fluorescence turn-on chemodosimeter for Cu(2+). Following Cu(2+)-promoted ring-opening, redox and hydrolysis reactions, comparable amplifications of absorption and fluorescence signals were observed upon addition of Cu(2+); this suggests that chemodosimeter 4 effectively avoided the fluorescence quenching caused by the paramagnetic nature of Cu(2+). Importantly, 4 can selectively recognize Cu(2+) in aqueous media in the presence of other trace metal ions in organisms (such as Fe(3+), Fe(2+), Cu(+), Zn(2+), Cr(3+), Mn(2+), Co(2+), and Ni(2+)), abundant cellular cations (such as Na(+), K(+), Mg(2+), and Ca(2+)), and the prevalent toxic metal ions in the environment (such as Pb(2+) and Cd(2+)) with high sensitivity (detection limit < or =10 ppb) and a rapid response time (< or =1 min). Moreover, by virtue of the chemodosimeter as fluorescent probe for Cu(2+), confocal and two-photon microscopy experiments revealed a significant increase of intracellular Cu(2+) concentration and the subcellular distribution of Cu(2+), which was internalized into the living HeLa cells upon incubation in growth medium supplemented with 50 muM CuCl(2) for 20 h.     

Enhanced hydrogen release by catalyzed hydrolysis of sodium borohydride-ammonia borane mixtures: a solution-state 11B NMR study

Hydrolysis of mixtures consisting of sodium borohydride NaBH(4) (SB) and ammonia borane NH(3)BH(3) (AB) was studied in the absence/presence of a Co catalyst. The kinetics of the H(2) evolutions was measured. The reactions were followed in situ by solution-state (11)B NMR and the hydrolysis by-products characterized by NMR, XRD and IR. It is demonstrated that the combination of the two compounds gives a synergetic effect. SB rapidly reduces the Co catalyst precursor and the NH(4)(+) ions from AB contribute in the dispersion of the in situ formed Co nanoparticles. As a result, the kinetics of H(2) evolution is greatly improved. For instance, a hydrogen generation rate of 29.6 L min(-1) g(-1)(Co) was found for a mixture consisting of 81 wt% NH(3)BH(3), 9 wt% NaBH(4) and 10 wt% CoCl(2). By (11)B NMR, it was showed that the reaction mechanisms are quite trivial. As soon as the Co catalyst forms in situ, SB, rather than AB, hydrolyzes until it is totally converted. Then, the overall hydrolysis continues with that of AB. Both reactions follow a bimolecular Langmuir-Hinshelwood mechanism; no reaction intermediates were observed during the process. In fact, SB and AB convert directly into B(OH)(4)(-), which comes in equilibrium with a polyborate compound identified as B(3)O(3)(OH)(4)(-). All of these results are discussed herein.     

Salt‐Free Reduction of Nonprecious Transition‐Metal Compounds: Generation of Amorphous Ni Nanoparticles for Catalytic C–C Bond Formation

A salt‐free procedure for the generation of a wide variety of metal(0) particles, including Fe, Co, Ni, and Cu, was achieved using 2,3,5,6‐tetramethyl‐1,4‐bis(trimethylsilyl)‐1,4‐diaza‐2,5‐cyclohexadiene ( 1 ), which reduced the corresponding metal precursors under mild conditions. Notably, Ni particles formed in situ from the treatment of Ni(acac)₂ (acac=acetylacetonate) with 1 in toluene exhibited significant catalytic activity for reductive C? C bond‐forming reactions of aryl halides in the presence of excess amounts of 1 . By examination of high‐magnification transmission electron microscopy images and electron diffraction patterns, we concluded that amorphous Ni nanoparticles (Ni aNPs) were essential for the high catalytic activity.     

Multi‐shaped Amorphous Alloy Ni‐B: Ultrasonically Aided Complexing‐reduction Preparation,Catalytic Ability for NaBH4 Hydrolysis Yielding H2 Gas

The multi‐shaped amorphous alloy (Ni‐B) powders were prepared by complexing reduction route using sodium borohydride (NaBH₄) as reductant with assistance of ultrasonic wave. The selected complexants, i.e. water, ammonia, salicylic acid, and ethylene diamine tetraacetic acid (EDTA) possess sequentially escalating complexation ability. The chemical composition and shapes of the product samples obtained under different conditions were characterized by X‐ray powder differaction, selected area electron diffraction, and transmission electron microscope. The influence of reaction conditions such as the types of Ni‐B, temperatures, NaBH₄ concentrations, and sodium hydroxide (NaOH) content on the hydrogen generation rate of hydrolysis of NaBH₄ solution were investigated in detail. The results show that the as‐prepared Ni‐B powders all belong to amorphous alloy with variable element contents, and the Ni‐B sample prepared from EDTA complexation, possessing the best fineness and dispersity, has the strongest catalytic activity. The mean apparent activation energy of the hydrolysis reaction is 64.90 kJ · mol^–1. The NaBH₄ concentration has little impact on hydrogen generation rate, implying that the catalytic hydrolysis of NaBH₄ solution should be the pseudo zero‐order reaction. Keeping the NaOH content at below 5 % could inhibit the hydrolysis of NaBH₄ solution, but the NaOH contents from 10 % to 15 % will significantly promote the hydrolysis rate of NaBH₄. The hydrolysis reaction mechanisms, especially the effect of NaOH content on the hydrolysis reaction were also analyzed.     

Studies on the complexing behavior of a potentially tetradentate Schiff-base ligand with some transition metal ions

The Schiff base furfural-histidine with Co(II), Ni(II), Cu(II), and Zn(II) in solution gives M(AB), M(AB)B, or M(AB)₂. The Schiff base is tetradentate in M(AB)₂ and M(AB)B and tridentate in M(AB)₂; [M(AB)₂] · 2H₂O (M = Co, Ni and Zn) and [Cu(AB)]NO₃ were synthesized and characterized by elemental analysis, molecular weight determination, conductance, IR, UV–Vis, and CV. The electronic spectral measurements indicate that M(AB)₂ (M = Co(II) and Ni(II)) are octahedral and Cu(AB) is square planar geometry. The donor groups in the complexes have been identified by IR. The complexes undergo irreversible one step, two-electron reduction. Antibacterial activity of the complexes was screened for Escherichia coli and Staphylococcus aureus. Cu(II) complex was found to be more active than the Co(II), Ni(II), and Zn(II) complexes.     

Structural and electronic characterization of the complexes obtained by the interaction between bare and hydrated first-row transition-metal ions (Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+)) and glycine

The complexes formed by the simplest amino acid, glycine, with different bare and hydrated metal ions (Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+)) were studied in the gas phase and in solvent in order to give better insight into the field of the metal ion-biological ligand interactions. The effects of the size and charge of each cation on the organization of the surrounding water molecules were analyzed. Results in the gas phase showed that the zwitterion of glycine is the form present in the most stable complexes of all ions and that it usually gives rise to an eta(2)O,O coordination type. After the addition of solvation sphere, a resulting octahedral arrangement was found around Ni(2+), Co(2+), and Fe(2+), ions in their high-spin states, whereas the bipyramidal-trigonal (Mn(2+) and Zn(2+)) or square-pyramidal (Cu(2+)) geometries were observed for the other metal species, according to glycine behaves as bi- or monodentate ligand. Despite the fact that the zwitterionic structure is in the ground conformation in solution, its complexes in water are less stable than those obtained from the canonical form. Binding energy values decrease in the order Cu(2+) > Ni(2+) > Zn(2+) approximately Co(2+) > Fe(2+) > Mn(2+) and Cu(2+) > Ni(2+) > Mn(2+) approximately Zn(2+) > Fe(2+) > Co(2+) for M(2+)-Gly and Gly-M(2+) (H(2)O)(n) complexes, respectively. The nature of the metal ion-ligand bonds was examined by using natural bond order and charge decomposition analyses.     

Study of metal ion labeling of the conformational and charge states of lysozyme by ion mobility mass spectrometry

The efficiency of Zn(2+), Cu(2+), Ni(2+), Co(2+), Fe(2+) or Mn(2+) labeling of the conformational and charge states of lysozyme was studied in H(2)O solvent at pH 2.5-6.8. Labeling of lysozyme was conducted with 50 M, 100 M and 500 M excess of the metal ion, resulting in the number of metal ions attached to lysozyme increasing two-fold over this range. At pH 6.2-6.8, Zn(2+), Cu(2+), Ni(2+), Co(2+) and Mn(2+) labeled the highly folded 7+ conformer and the 8+ and 9+ partially unfolded conformers of lysozyme with the same number of metal ion tags, with only Fe(2+) exhibiting no labeling. Lysozyme conserved its charge after metal ion labeling which shows at each charge state the divalent metal ion is replacing two protons. As the pH is lowered to 4.7-5.0 and 2.5-2.9, the labeling of lysozyme by Zn(2+), Cu(2+), Ni(2+), Co(2+) or Mn(2+) decreased in efficiency due to increased competition from protons for the aspartate and glutamate binding sites. The metal ions preferentially labeled the highly folded 7+ and partially unfolded 8+ conformers, but labeling decreased as the charge of lysozyme increased. In contrast to the other metal ions, Fe(2+) exhibited labeling of lysozyme only at the lowest pH of 2.8. At higher pH, the oxidation of Fe(2+) and formation of hydroxy-bridged complexes probably make the Fe(2+) unreactive towards lysozyme.     

Colorimetric assay for parallel detection of Cd2+, Ni2+ and Co2+ using peptide-modified gold nanoparticles

A colorimetric assay has been developed for parallel detection of Cd(2+), Ni(2+) and Co(2+) utilizing peptide-modified gold nanoparticles (P-AuNPs) as a sensing element based on its unique surface plasmon resonance properties. The functional peptide ligand, CALNNDHHHHHH, was self-assembled on gold nanoparticles (AuNPs) to produce P-AuNPs probe. The P-AuNPs probe could be used to simultaneously detect and showed different responses to the three ions Cd(2+), Ni(2+) and Co(2+) in an aqueous solution based on the aggregation-induced color change of AuNPs. The method showed good selectivity for Cd(2+), Ni(2+) and Co(2+) over other metal ions, and detection limit as low as 0.05 μM Cd(2+), 0.3 μM Ni(2+) or 2 μM Co(2+). To simultaneously (or parallel) detect the three metal ions coexisting in a sample, EDTA and imidazole were applied to mask Co(2+) and Ni(2+) for detecting Cd(2+), glutathione and EDTA were applied to mask Cd(2+) and Co(2+) for detecting Ni(2+), and glutathione and imidazole were applied to mask Cd(2+) and Ni(2+) for detecting Co(2+). Finally, the simple and cost-effective probe could be successfully applied for simultaneously detecting Cd(2+), Ni(2+), and Co(2+) in river water. Because this novel P-AgNPs-based probe design offers many advantages, including simplicity of preparation and manipulation compared with other methods that employ specific strategies, the sensing system shows potential application in the developing region for monitoring water quality.     

An iron(III) selective dendrite chelator based on polyamidoamine dendrimer modified with 4-bromo-1,8-naphthalimide

A new 4-bromo-1,8-naphthalimide-labelled polyamidoamine (PAMAM) dendrimer from zero generation has been synthesised and characterised. Its functional characteristics, determined in acetonitrile solvent are discussed. The ability of the dendrimer to detect metal cations has been evaluated in acetonitrile by monitoring the quenching of the fluorescence intensity. Different metal cations have been tested Co(2+), Ni(2+), Cu(2+) and Fe(3+) for the purpose. The results have shown clearly that only Fe(3+) could be efficiently detected using the dendrimer.     

Coordination numbers of hydrated divalent transition metal ions investigated with IRPD spectroscopy

Hydration of the divalent transition metal ions, Mn, Fe, Co, Ni, Cu, and Zn, with 5-8 water molecules attached was investigated using infrared photodissociation spectroscopy and photodissociation kinetics. At 215 K, spectral intensities in both the bonded-OH and free-OH stretch regions indicate that the average coordination number (CN) of Mn(2+), Fe(2+), Co(2+), and Ni(2+) is ~6, and these CN values are greater than those of Cu(2+) and Zn(2+). Ni has the highest CN, with no evidence for any population of structures with a water molecule in a second solvation shell for the hexa-hydrate at temperatures up to 331 K. Mn(2+), Fe(2+), and Co(2+) have similar CN at low temperature, but spectra of Mn(2+)(H(2)O)(6) indicate a second population of structures with a water molecule in a second solvent shell, i.e., a CN < 6, that increases in abundance at higher temperature (305 K). The propensity for these ions to undergo charge separation reactions at small cluster size roughly correlates with the ordering of the hydrolysis constants of these ions in aqueous solution and is consistent with the ordering of average CN values established from the infrared spectra of these ions.     

Metallomicellar Catalysis Hydrolysis of p-Nitrophenyl Picolinate Catalyzed by Copper(II), Nickel(II), and Zinc(II) Complexes of Long Alkyl Pyridine Ligands in Micellar Solution

The ternary complex kinetic model for metallomicellar catalysis has been proposed in this paper. The catalytic effects of bivalent metal ion (Cu(2+), Zn(2+), and Ni(2+)) complexes of long alkyl pyridine ligands upon the hydrolysis of p-nitrophenyl picolinate (PNPP) have been studied kinetically in aqueous buffer of pH ranging from 5.0 to 8.5 at 30 degrees C. The effect of pH on the reactivity is discussed. The results indicate that the metallomicelles formed by pyridine ligands promote the hydrolysis of PNPP, and the order is Cu(II) system>Ni(II) system>Zn(II) system. A stereochemical modification of the complex in the CTAB micelle is suggested as a likely explanation for the observed phenomena. Copyright 2000 Academic Press.     

Nanostructured Cu and Cu@Cu(2)O core shell catalysts for hydrogen generation from ammonia-borane

Copper nanoparticles have been prepared by the solvated metal atom dispersion (SMAD) method. Oxidation of the SMAD prepared copper colloids resulted in Cu@Cu(2)O core shell structures (7.7 +/- 1.8 nm) or Cu(2)O nanoparticles depending on the reaction conditions. The nano Cu, Cu@Cu(2)O core shell, and Cu(2)O particles were found to be catalytically active for the generation of hydrogen from ammonia-borane either via hydrolysis or methanolysis reaction.     

Interactions of metal ions with monoaza crown ethers A15C5 and A18C6 carrying dansyl fluorophore as pendant in acetonitrile solution

The influence of metal cations Li(+), Na(+), K(+), Cs(+), Mg(2+), Ca(2+), Sr(2+), Ba(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Pb(2+) and Al(3+) on the spectroscopic properties of the dansyl (1-dimethylaminonaphthalene-5-sulfonyl) group covalently linked to monoaza crown ethers 1-aza-15-crown-5 (1,4,7,10,-tetraoxa-13-azacyclopentadecane) (A15C5) and 1-aza-crown-6 (1,4,7,10,13-pentaoxa-16-azacyclooctadecane) (A18C6) was investigated by means of absorption and emission spectrophotometry. Interaction of the alkali metal ions with both fluoroionophores is weak, while alkaline earth metal ions interact strongly causing 50 and 85% quenching of dansyl fluorescence of N-(5-dimethylamine-1-naphthalenesulfonylo)-1,4,7,10,-tetraoxa-13-azacyclopentadecane (A15C5-Dns) and N-(5-dimethylamine-1-naphthalenesulfonylo)-1,4,7,10,13-pentaoxa-16-azacyclooctadecane (A18C6-Dns), respectively. The Cu(2+), Pb(2+) and Al(3+) cations interact very strongly with dansyl chromophore, causing a major change in absorption spectrum of the chromophore and forming non-fluorescent complexes. The Co(2+), Ni(2+), Zn(2+), Mg(2+) cations interact moderately with both fluoroionophores causing quenching of dansyl fluorescence by several percent only.