广义典型流形的实例构作

陈述了广义典型流形(或拓扑域流形)的概念,并构作了拓扑域流形的若干实例,丰富了这类流形的内容,也给今后研究和运用拓扑域流形提供一些参考.     

拟Sasaki 流形的不变子流形

S.Tanno[2],K.Yano 和 S.Ishihara[3]曾经证明了Sasaki 流形的任何不变子流形是极小的。后来 G.D.Ludden 在余维数为2的情况下证明了余辛流形的不变子流形是极小的(参看[4]引理3.6。)本文在余维数≥2的一般情况下将 G.D.Ludden 的结果推广到比余辛流形更广泛的拟 Sasaki 流形。值得一提的是,Hiroshi Endo[5]曾将 G.D.Lu dde n的结果推广到殆余辛流形,但拟 Sasaki 流形和殆余辛流形是互不包含的。本文还得出一个拟Sasaki 流形的不变子流形是全测地的条件。     

Milnor的一个定理的简单证明

一个流形W叫做是π-流形,如果它的切丛T(W)和W上的一维平凡向量丛的Whitney和是平凡丛.对π-流形,我们希望剜补后所得的流形还是π-流形。对此,有下面的Milnor的重要结果。 定理 设W是C~∞π-流形,dimW=n≥2p+1,则π_p(W)中的任一元素可使得流形X(w,f)也是π-流形的C~∞嵌入f:S~p×D~(n-p)→W表示。 定理中的x(W,f)表示由f实施剜补后所得的流形。这一定理的一个推论是任意n维π-     

三维数值流形方法的理论研究

在二维数值流形方法的基础上,对三维数值流形进行了理论研究．研究了三维覆盖位移函数,进行了三维数值流形的力学分析,给出了三维流形单元的刚度矩阵,详细推导了三维数值流形的Hammer积分及剖分规则,系统地研究三维数值流形的理论体系与数值实现方法．作为数值算例,给出了相应的悬臂梁的计算结果,计算结果表明算法的精度和计算效益较高．     

Beltrami定理的推广

本文研究了Berwald流形之间的射影对应.利用Berwald流形上Weyl射影曲率张量的射影不变性,证明了当n>2时,与射影平坦的Berwald流形射影对应的黎曼流形M~n是常曲率流形,从而推广了Beltrami定理.     

共形对称的K—切触流形

本文建立了共形平坦的K－切触流形的纯量曲率适合的偏微分方程，证得：共形对称的K－切触流形是具常曲率1的Riemann流形，将Okumura和Miyazaawa等人的有关Sasaki流形的结果推广到K－切触流形。     

强Khler-Finsler流形上(p,q)形式的中值Laplace算子(英文)

本文给出了强Khler-Finsler流形上中值Laplace算子的一些性质,如自伴性质,散度形式等。与Khler流形上利用逆变基本张量及其在Finsler流形上的变形作为密度函数定义流形上的逐点内积及整体内积不同,作者利用强Khler-Finsler流形上的逆变密切Khler度量作为密度函数定义了流形上的逐点内积和整体内积,并定义了强Khler-Finsler流形上的Hodge-Laplace算子,它可看作函数情形中值Laplace算子的推广。     

靶流形为球面子流形的调和映射的量子化现象(英文)

本文研究了调和映射和极小子流形的量子化性质.通过运用谱分解方法,获得了靶流形为球面子流形的调和映射的量子化性质,然后将其应用到球面的极小子流形的高斯映射,得到了极小子流形的第二基本形式的量子化性子.     

非线性Sobolev Galpern方程的近似惯性流形

近似惯性流形概念与耗散偏微分方程的长时间行为研究有关, 该文对非线性Sobolev Galpern方程构造了两个近似惯性流形. 证明了非平滑近似惯性流形Σ和平滑近似惯性流形Σ_0=P_mH对整体吸引子有相同的逼近阶数.     

靶流形为齐次流形的弱次椭圆Q调和映射的正则性

该文证明了靶流形为齐次流形的弱次椭圆Q调和映射是内部正则的，这里Q是定义域的 齐次维数。这一结果推广了Hajlasz和Strzelecki的相应结果[2].作为推论得到了靶流形为齐次流形的p维p调和映射的正则性.     

乡村绿色生态旅游适宜等级VIKOR评估方法

针对乡村绿色生态旅游特征,并考虑旅游者个体感受与群体效益,本文从乡村绿色生态旅游开发与适宜评级概念出发,提出乡村绿色生态旅游适宜等级VIKOR评估模型与方法。首先,从等级评估的概念与内涵出发,刻画乡村绿色生态旅游适宜评级问题,避免混淆旅游适宜评级和排序两个本质不同的问题。然后,构建乡村绿色生态旅游适宜等级评估指标及隶属函数,提出评估指标的熵权确定方法。其次,提出乡村绿色生态旅游适宜等级VIKOR评估模型与二元语义等级评估方法。最后,通过案例研究和比较分析,说明本文所提模型与方法的合理性、可行性与实用性。     

Interpreting linear systems of equalities and inequalities. Application to the water supply problem

This paper shows how the mathematical and the engineering points of view are complementary and help to model real problems that can be stated as systems of linear equations and inequalities. The paper is devoted to point out these relations and making them explicit for the readers to realize about the new possibilities that arise when contemplating the compatibility conditions or the set of general solutions from the dual perspective. After reviewing an orthogonally based powerful algorithm to analyse the compatibility of linear systems of equations and solving them, a water supply problem is used to illustrate its mathematical and engineering multiple aspects, including the optimal statement of the problem in terms of an adequate selection and numbering of equations and unknowns, an analysis of the compatibility conditions and a physical interpretation of the general solution, together with that of each individual generators of the affine space. The possibilities of removing unknowns without altering the compatibility of the problem is also analysed. Next, the Γ‐algorithm to analyse the compatibility of linear systems of inequalities and solving them is described and then, the water supply problem is revisited adding some constraints, such as capacity limits for the pipes and retention valves, and discussed as to how they affect the resulting general solution and other aspects. Finally, some conclusions are derived. Copyright © 2005 John Wiley & Sons, Ltd.     

复杂装备研制协调超网络均衡与实现路径

复杂装备研制主体间呈现社会关系、合作关系、协调关系等网络关系,并且相互影响相互作用,其影响复杂装备研制的重要参数。为有效描述在资源环境约束下制造商和供应商的关系,探讨复杂装备研制协调机理与实现路径,本文利用超网络方法,设计了相互影响、相互作用的社会关系网络、协调网络和合作网络的复杂装备研制协调超网络,并将社会关系水平、协调度和合作水平作为超网络的3个决策变量,建立基于关系价值最大、协调成本最低、协调风险最小、合作收益最大、合作风险最小和成本最小等不同偏好下的多目标最优决策模型,构建了复杂装备研制超网络均衡模型,并利用其探讨超网络均衡和实现路径。     

利益相关者视角下公路货运超限超载的对策研究——基于演化博弈模型和仿真分析

为有效遏制公路货运超限超载现象,深化交通执法领域的“放管服”改革,本研究针对运输者、稽查人员和交管部门等利益相关者,建立三方演化博弈模型,研究超限超载运输中各利益主体的决策演化过程,并对稳定策略的演化路径进行仿真分析,比较不同参数组合下不同政策力度的治理效果。研究发现,提高超限超载运输的处罚系数可以明显规范运输者的行为;管理成本越低,监管部门的策略越可能向积极监管的方向演化;三方博弈系统存在两种可能的演化稳定策略,加重对稽查人员消极执法行为的处罚、加大资金设备投入能够提高系统向最优状态演化的概率。     

On the use of history of mathematics: an introduction to Galileo's study of free fall motion

In this paper, we report on an experimental activity for discussing the concepts of speed, instantaneous speed and acceleration, generally introduced in first year university courses of calculus or physics. Rather than developing the ideas of calculus and using them to explain these basic concepts for the study of motion, we led 82 first year university students through Galileo's experiments designed to investigate the motion of falling bodies, and his geometrical explanation of his results, via simple dynamic geometric applets designed with GeoGebra. Our goal was to enhance the students’ development of mathematical thinking. Through a scholarship of teaching and learning study design, we captured data from students before, during and after the activity. Findings suggest that the historical development presented to the students helped to show the growth and evolution of the ideas and made visible authentic ways of thinking mathematically. Importantly, the activity prompted students to question and rethink what they knew about speed and acceleration, and also to appreciate the novel concepts of instantaneous speed and acceleration at which Galileo arrived.     

激光辐照下圆薄板的动态屈曲研究

对强激光辐照下薄板（铜片）的动态热失稳过程进行了分析，得出了简支圆薄板在热冲击下发生的屈曲及后屈曲过程，并给出了临界激光功率密度与薄板厚径比的关系曲线，方法计入了温度分布、惯性项和缺陷大小对于失稳过程的影响。这一工作有利于人们对强激光引起的硬目标破坏机理的认识。     

基于系统动力学的政府和废旧电子产品处理商演化博弈分析

文章为探究政府管制在废旧电子产品处理商实施生态拆解的作用,运用系统动力学方法构建了废旧电子产品处理问题中政府和处理商之间的一个混合策略演化博弈模型,并对政府管制策略选择与处理商实施生态拆解策略选择的互动机制进行了分析。演化博弈和系统仿真结果表明:处理商实施生态拆解和非生态拆解的收益、政府管制的有效性以及处理商实施非生态拆解受到惩罚等都直接影响系统的演化结果;政府和处理商两群体在3种情形下存在演化稳定策略;在一定的条件下,系统演化呈现周期性特征。最后从政府管制的角度出发,动态策略的演化博弈模型存在演化稳定的均衡点。     

Boundary-Value Problems of the Theory of Thin and Nonthin Orthotropic Shells with Account of Nonlinearly Elastic Properties and Low Shear Rigidity of Composite Materials

The basic geometric and physical relations and resolving equations of the theory of thin and nonthin orthotropic composite shells with account of nonlinear properties and low shear rigidity of their materials are presented. They are derived based on two theories, namely the theory of anisotropic shells employing the Timoshenko or Kirchhoff-Love hypothesis and the nonlinear theory of elasticity and plasticity of anisotropic media in combination with the Lagrange variational principle. The procedure and algorithm for the numerical solution of nonlinear (linear) problems are based on the method of successive approximations, the difference-variational method, and the Lagrange multiplier method. Calculations of the stress-strain state for a spherical shell with a circular opening loaded with internal pressure are presented. The effect of transverse shear strains and physical nonlinearity of the material on the distribution of maximum deflections and circumferential stresses in the shell, obtained according to two variants of the shell theories, is studied. A comparison of the results of the problem solution in linear and nonlinear statements with and without account of the shell shear strains is given. The numerical data obtained for thin and nonthin (medium thick) composite shells are analyzed.     

Influence of Multiple Micro Cracks on the Damage Behavior of a Macro-Crack Tip北大核心CSCD

The solution of an infinite plane containing a macro crack and a cluster of micro cracks under uniaxial tensile load was presented based on Muskhelishvili’s complex function method and the stepwise recursive method. The stress field and stress intensity factor K were obtained. Combined with the damage mechanics, damage parameter D of the macro-crack tip and the micro-crack tip under uniaxial tension was redefined, and the influence of different damage zone forms on the damage of the crack tip was analyzed. The results show that, both the chain-distribution and the reverse-chain-distribution micro cracks have an amplifying effect on the macro crack growth, and the damage parameter increases with the decrease of the inclination angle of the micro crack and the reduction of the distance between the macro crack and the micro cracks. For a relatively small inclination angle of the micro crack, the damage parameters of the macro crack and the micro crack heightens, and the damage parameter of the macro crack increases with the micro-crack length. For evenly distributed micro cracks in the continuous damage zone, the micro cracks have an amplifying effect on the macro-crack growth, and the damage parameter of the macro crack increases with the micro-crack number. © 2022 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

Creep of polymer concrete in the nonlinear region

Two polyester-based polymer concretes with various volume content of diabase as an extender and aggregate are tested in creep under compression at different stress levels. The phenomenological and structural approaches are both used to analyze the experimental data. Common features of changes in the instantaneous and creep compliances are clarified, and a phenomenological creep model which accounts for the changes in the instantaneous compliance and in the retardation spectrum depending on the stress level is developed. It is shown that the model can be used to describe the experimental results of stress relaxation and creep under repeated loading. Modeling of the composite structure and subsequent solution of the optimization problem confirm the possibility of the existence of an interphase layer more compliant than the binder. A direct correlation between the interphase volume content and the instantaneous compliance of the composite is revealed. It is found that the distinction in nonlinearity of the viscoelastic behavior of the two polymer concretes under investigation can be due to the difference in their porosity. Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000.) Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 147–164, 2000.