Coordination polymer nanorods of Fe-MIL-88B and their utilization for selective preparation of hematite and magnetite nanorods

Coordination polymer nanorods are synthesized from the hexagonal 3D structure of Fe-MIL-88B. Subsequently, hematite (α-Fe(2)O(3)) and magnetite (Fe(3)O(4)) nanorods are selectively prepared by controlling the calcination conditions of coordination polymer nanorods.     

Magneto recyclable,green fabricated Fe3O4 nanorods on photo responsive of textile dye degradation and identification products by LC-MS

Prior to being released towards water sources such as rivers, lakes, and groundwater, the efficient technique of removing color out textile effluents seems to have become widely used. Such contaminants are extremely difficult for traditional wastewater treatment methods to completely eliminate. This innovative development of phytonutrients uses Fe₃O₄ nanorods, that have been employed as photocatalytic to change substrate colors in the aqueous layer when exposed to light. Given prominence was adopted to incorporate phytonutrients with Fe3O4 nanorods. The degradation of the methyl violet colour has been acknowledged by the depletion of the UV light (UV) absorption edge that also originated at 581 nm. The significant colour expulsion of the Fe3O4 nanorod was proved to really be 97% after 60 min. The findings demonstrate that ecologically responsible Fe₃O₄ nanorods are immensely beneficial in the photocatalytic reaction of harmful pollutants.     

Fe3O4@SiO2@YF3∶Eu3+磁-光双功能复合粒子的制备与性能

采用水热法合成了Fe3O4@SiO2@YF3∶Eu3+磁-光双功能复合粒子,对其结构和性能进行了表征。XRD分析表明:Fe3O4表面包覆上了结晶良好的正交晶系的YF3。TEM照片表明:复合粒子为球形,构成核的Fe3O4颗粒的尺寸在200～350 nm之间,Fe3O4@SiO2@YF3∶Eu3+核壳结构复合粒子的尺寸约为230～380 nm,与包覆前的Fe3O4相比较,包覆后,颗粒尺寸增大,并且YF3∶Eu3+是以棒状结构连接在Fe3O4球型颗粒的表面。磁性和荧光光谱分析表明:该复合颗粒同时具有良好的发光性和磁性,使其在生物医学领域具有潜在的应用。     

氧化铁对铂在碱性介质中催化氧化甲醇的促进作用

Pt催化剂是电催化领域用途最为广泛的贵金属催化剂.Pt资源稀缺,价格昂贵,同时它的物理化学特性又决定了其在多种催化反应中难以被替代.在质子交换膜燃料电池的小分子醇类电氧化过程中,难免存在Pt的毒化现象,其催化性能有待进一步提升.因此,围绕着Pt催化剂纳米结构的设计、抗毒性及反应机理的探索一直是电催化研究面临的重要课题.目前,已被广泛认可的提高Pt催化性能的方法之一是引入第二种金属,通过金属间协同效应(双功能机理)、张力效应或电子效应等对Pt的催化行为进行改性.对于由双/多金属组成的纳米结构催化剂,无论是协同效应还是电子效应,催化活性的提高都需要金属间有丰富的接触界面和恰当的邻近状态.通过调变两组元的种类、原子比和接触状态等可以实现对金属-金属界面的调控,进而调变催化剂性能.除金属助剂外,金属氧化物对Pt催化剂的助催化作用也引起广泛关注.由于金属氧化物与Pt之间的密切接触作用,氧化物的形貌特点对Pt的催化性能可产生重要影响.到目前为止,有关催化剂形貌效应的研究主要集中于贵金属纳米颗粒上(Pt,Au,Pd等),但关于金属氧化物载体/助剂的形貌对贵金属催化性能影响的研究尚不多.具有明确形貌的金属氧化物载体/助剂,暴露的晶面不同,表面原子的配位状态也不同,从而造成与之密切接触的Pt的性质发生改变.因此,金属氧化物的表面性质以及Pt-金属氧化物的界面性质将对电催化性能产生重要影响,深入阐释贵金属-金属氧化物的表/界面性质以及建立有效的构效关系,对设计和制备高效电催化剂具有一定的指导意义.为了提高Pt基催化剂活性、抗CO中毒能力以及稳定性,本文采用共沉淀法和水热法分别制备了纳米棒和六边形纳米片状的Fe2O3作为Pt催化剂的助剂,考察了助剂形貌对Pt催化剂在碱性介质中催化氧化甲醇的促进作用.通过X射线衍射、扫描电子显微镜、透射电子显微镜、X射线光电子能谱以及电化学技术对催化剂进行了表征.结果显示,Fe2O3的存在能显著提高Pt催化剂在碱性介质中对甲醇氧化的电催化性能,而且以Fe2O3纳米棒为助剂制备的Pt-Fe2O3/C-R催化剂催化活性以及稳定性比Fe2O3纳米片为助剂制备的Pt-Fe2O3/C-P催化剂更高.这种促进效应可能与助剂Fe2O3的形态有关.Pt-Fe2O3/C-R催化剂中Pt的质量比活性为5.32 A/mgPt,本征活性为162.7 A/m2Pt,分别是Pt-Fe2O3/C-P催化剂的1.67和2.04倍,是商业PtRu/C样品的4.19和6.16倍.协同效应和电子效应是Pt催化性能提升的主要原因.此外,Pt-Fe2O3/C-R样品中高价态Pt的含量较高,可能也是加速甲醇氧化反应动力学的原因之一.高价态的Pt可能会增强甲醇分子在Pt表面的吸附强度,促进Pt上甲醇氧化反应初始步.这些发现不仅可对甲醇电催化氧化机理有了更深的理解,而且对设计和制备高性能甲醇氧化电催化剂也具有一定的指导意义.     

Iron oxide coated gold nanorods: synthesis, characterization, and magnetic manipulation

We report a simple process to generate iron oxide coated gold nanorods. Gold nanorods, synthesized by our three-step seed mediated protocol, were coated with a layer of polymer, poly(sodium 4-styrenesulfonate). The negatively charged polymer on the nanorod surface electrostatically attracted a mixture of aqueous iron(II) and iron(III) ions. Base-mediated coprecipitation of iron salts was used to form uniform coatings of iron oxide nanoparticles onto the surface of gold nanorods. The magnetic properties were studied using a superconducting quantum interference device (SQUID) magnetometer, which indicated superparamagnetic behavior of the composites. These iron oxide coated gold nanorods were studied for macroscopic magnetic manipulation and were found to be weakly magnetic. For comparison, premade iron oxide nanoparticles, attached to gold nanorods by electrostatic interactions, were also studied. Although control over uniform coating of the nanorods was difficult to achieve, magnetic manipulation was improved in the latter case. The products of both synthetic methods were monitored by UV-vis spectroscopy, zeta potential measurements, and transmission electron microscopy. X-ray photoelectron spectroscopy was used to determine the oxidation state of iron in the gold nanorod-iron oxide composites, which is consistent with Fe2O3 rather than Fe3O4. The simple method of iron oxide coating is general and applicable to different nanoparticles, and it enables magnetic field-assisted ordering of assemblies of nanoparticles for different applications.     

Selected-control synthesis of PbO2 and Pb3O4 single-crystalline nanorods

Reaction of Pb(OH)3- with ClO- in the presence of surfactant CTAB under conventional conditions resulted in PbO2 nanorods, whereas the reaction under hydrothermal conditions afforded Pb3O4 nanorods, as confirmed by X-ray powder diffraction and transmission electron microscopy (TEM). Selected area electron diffraction (SEAD) and high-resolution TEM (HRTEM) revealed that both PbO2 and Pb3O4 nanorods are single crystalline. For the formation of Pb3O4 nanorods, it is reasonable that PbO2 slowly decomposes to Pb3O4 under hydrothermal conditions, while retaining the morphology of PbO2.     

富表面氧空位Fe2O3/ZnO催化剂在光催化合成氨中的应用

光催化合成氨是一种绿色节能的合成氨技术,设计制造丰富的表面氧空位和异质结构是促进氮分子活化和抑制电子-空穴复合的重要方法。我们以乙二醇作为还原剂,采用溶剂热法制备合成了Fe2O3/ZnO光催化剂,利用X射线衍射(XRD)、透射电镜(TEM)、电子顺磁共振(EPR)、紫外-可见漫反射(UV-Vis DRS)、荧光光谱(PL)及光电流(PC)对Fe2O3/ZnO催化剂进行表征,并考察了Fe2O3/ZnO催化剂在常温、常压下的光催化合成氨的性能。4%Fe2O3/ZnO催化剂在无牺牲剂下用于光催化合成氨,有较好的光催化效率和稳定性,其合成氨效率达到2059μmol·L-1·g-1·h-1。其高催化效率归因于:可见光区域吸收的提高、氮分子在表面氧空位与Fe3+活性中心上的协同活化及光生电子与空穴的高分离效率。     

Preparation of organic-inorganic hybrid Fe-MoO(x)/polyaniline nanorods as efficient catalysts for alkene epoxidation

Novel Fe-MoO(x)/polyaniline nanorods were fabricated via in situ polymerization of Mo(3)O(10)(C(6)H(5)NH(3))(2)·2H(2)O nanowires, in which interface reactions remarkably influenced the morphology of products; and the nanorods showed high performance in cyclooctene epoxidation due to the organic-inorganic hybrid structure and Fe(3+) additive.     

Fabrication of 1D Fe2O3 with Flexible Ligands as Anodes for Lithium Ion Batteries

Russian Journal of Electrochemistry - Fe2O3 short nanorods, nanorods and nanowires were prepared by a facile hydrothermal method by using different flexible ligands (oxalic acid, succinic acid,...     

孔状Co_3O_4纳米片和纳米棒的选择性合成和表征(英文)

利用两步实验选择性合成孔状Co3O4纳米片和纳米棒:首先,以Co(NO3)2·6H2O,NaOH和不同量的NH4F为原料在120℃水热6h的条件下合成了Co(OH)2-Co3O4纳米片(S1)和Co(OH)F-Co3O4纳米棒(S2);然后将所得纳米片和纳米棒在400℃时加热2h即得到多孔的Co3O4纳米片和纳米棒。所得产物用X射线衍射(XRD)、场发射扫描电子显微镜(FE-SEM)和透射电子显微镜(TEM)进行了表征。此外电化学测试表明Co3O4纳米棒的电容量比Co3O4纳米片的更大。     

Synthesis of Pt@Fe2O3 nanorods as MRI probes for in vivo application

Magnetic Fe(2)O(3) nanorods with low cell toxicity were successfully synthesized via a wet-chemical method. In vivo studies with a rabbit model show that the nanorods exhibit excellent T(2) signal enhancement. This work demonstrates that magnetic nanorods may provide a new type of MR enhancement agent for use in biomedical applications.     

Branched mesoporous Mn3O4 nanorods: facile synthesis and catalysis in the degradation of methylene blue

Branched MnOOH nanorods with diameters in the range of 50-150 nm and lengths of up to tens of micrometers were prepared by using potassium permanganate (KMnO(4)) and PEG 400 (PEG=polyethylene glycol) as starting materials through a simple hydrothermal process at 160 °C. After annealing at 300 °C under a N(2) atmosphere for 5 h, MnOOH nanorods became gradually dehydrated and transformed into mesoporous Mn(3)O(4) nanorods with a slight size-shrinking. The as-obtained mesoporous Mn(3)O(4) nanorods had an average surface area of 32.88 m(2) g(-1) and a mean pore size of 3.7 nm. Through tuning the experimental parameters, such as the annealing atmosphere and temperature, β-MnO(2), Mn(2)O(3), Mn(3)O(4), MnO, and Mn(5)O(8) were selectively produced. Among these structures, mesoporous Mn(3)O(4) nanorods were efficient for the catalytic degradation of methylene blue (MB) in the presence of H(2)O(2) at 80 °C.     

Enhancement of photoresponse properties of conjugated polymers/inorganic semiconductor nanocomposites by internal micro-magnetic field

In this paper, the effect of the internal micro-magnetic field (IMMF) on the photocurrent property of conjugated polymer/inorganic semiconductor nanocomposites is reported and analyzed. By using the redox reaction, magnetic Fe(3)O(4) nanoparticles were coated on the surface of highly active nanorods of conjugated polyaniline (PANI), forming an internal micro-magnetic electron donor (i.e., Fe(3)O(4)@PANI). After subsequent incorporation of CdS nanoparticles (serving as electron acceptors), the power conversion efficiency (PCE) of the system (Fe(3)O(4)@PANI-CdS) was found to be as high as 3.563%, contrasting sharply with the value (1.135%) of the hybrid without Fe(3)O(4) (PANI-CdS). This obvious enhancement originated from the fact that the IMMF increased the number of singlet polaron pairs through field-dependent intersystem crossing (ISC), giving a positive contribution to the photocurrent generation. Additionally, the dependence of the photocurrent on the remnant magnetization of the Fe(3)O(4)@PANI-CdS nanocomposites was investigated. A percolation behavior was observed, which was due to the appearance of interpenetrating networks consisting of donor and acceptor phases, leading to the recombination of charge carriers through trapping. The outcomes of the present work might help to produce a new family of conjugated organic/inorganic semiconductor nanocomposites with designed optoelectronic performances.     

Spectroscopic understanding of ultra-high rate performance for LiMn(0.75)Fe(0.25)PO4 nanorods-graphene hybrid in lithium ion battery

Comprehensive X-ray absorption near-edge structure spectroscopy at the C, O and Li K-edges and the Mn, Fe, and P L-edges of LiMn(0.75)Fe(0.25)PO(4) nanorods-graphene has been reported in great detail. Compared to that of free standing graphene and LiMn(0.75)Fe(0.25)PO(4), the intimate interaction between the nanorods and graphene via charge redistribution has been unambiguously confirmed. This interaction not only anchors the nanorods onto the graphene but also modifies its surface chemistry, both of which afford the nanorods-graphene hybrid an ultra-high rate performance in lithium ion batteries. Such knowledge is important for the understanding of hybrid nanomaterials for lithium ion batteries and allows rational design for further improvements in performance.     

Evolution of electronic structure and spectral evaluation in single-crystal Mn3O4 nanorods

Single-crystal Mn3O4 nanorods with tetragonal structure have been successfully prepared by a chemical reaction route. Transmission electron microscopy (TEM) and high-resolution TEM studies prove that the single-crystal Mn3O4 nanorod is smooth and straight, and that the geometrical shape is structurally perfect. We investigated the electronic characteristics of Mn3O4 nanorods by various spectral evaluations. The present study confirms that the hybridization between oxygen 2p and manganese 3d orbits plays an important role when considering electronic structures of Mn3O4 nanorods.     

Inducing growth of FeNi-Pt match-like magnetic nanoheterostructures on Pt nanotips and dechlorination of hydrochloric ether

Newly designed magnetic FeNi-Pt match-like heterostructured nanorods were synthesized by means of induced growth of FeNi nanorods on Pt nanotips. The proposed synthesis mechanism is corroborated by SEM, TEM, XRD and XPS. The magnetic behavior shows that the magnetic saturation and coercivity are strongly dependent on both the shape and the alloy composition. The saturation magnetizations (Ms) and the coercivity (Hc) of nanorods synthesized are larger than those of nanoparticles because of the relatively large anisotropy of nanorods. Maximum saturation magnetization is obtained for Fe(82) Ni(15) -Pt(3) at 226.6 emu g(-1), whereas maximum coercivity is obtained for Fe(20)Ni(77)-Pt(3) at 136.8 Oe. Shape-dependent reactivity toward the reduction of chlorinated solvents was observed for the FeNi-Pt heterostructured nanomaterials. In particular, the Fe(82)Ni(15)-Pt(3) nanorods are highly reactive in the dechlorination process of 1,1,2,2-tetrachloroethane.     

Synthesis of W18O49 nanorod via ammonium tungsten oxide and its interesting optical properties

W(18)O(49) nanorods were synthesized by pyrolyzing (NH(4))(x)WO(3+x/2) nanorods precursors, which were prepared by a hydrothermal reaction using sulfate as a structure-directing agent, in a reductive atmosphere of H(2)(5 vol %)/N(2) at 500 °C for 1 h. W(18)O(49) nanorods showed high transmittance in the visible region as well as excellent shielding properties of NIR lights. A simulated experiment revealed that excellent heat insulating performance can be realized by applying a 70% visible light transparent W(18)O(49) coating on a quartz glass. Meanwhile, the W(18)O(49) nanorods also showed strong absorption of NIR light and instantaneous conversion of photoenergy to heat. In a word, W(18)O(49) nanorods hold interesting optical properties and are a promising material in a wide range of applications.     

Fabrication of Co3O4 nanorods by calcination of precursor powders prepared in a novel inverse microemulsion

Co3O4 nanorods were prepared by improving traditional molten salt synthesis; the length and diameters of the Co3O4 nanorods were about 10 microns and 40-100 nm, respectively; the mechanism of formation of the Co3O4 nanorods is discussed.     

CoBx/Co3O4电催化剂的制备及其氧析出性能

采用NaBH4溶液处理经水热、热处理步骤制得Co3O4纳米棒,得到表面富含氧空位以及无定型CoBx的Co3O4(CoBx/Co3O4)氧析出(OER)电催化剂。利用X射线衍射(XRD)、场发射扫描电镜(FESEM)、透射电镜(TEM)、X射线光电子能谱仪(XPS)等技术表征了催化剂的物相、微观形貌、元素组成以及表面化学键结构等。通过电化学工作站测试了电极材料的OER活性、稳定性、电化学阻抗等。结果表明,经NaBH4处理后,Co3O4表面高价态Co被还原至低价态Co,最终其表面有无定型CoBx的生成,并含有大量氧空位,有效提升了OER性能。在1.0 mol·L^-1 KOH电解质溶液中,达到10 mA·cm^-2的电流密度时,CoBx/Co3O4所需的过电位由Co3O4的346 mV降至298 mV。     

Length-controllable catalyzing-synthesis and length-corresponding properties of FeCo/Pt nanorods

Newly designed magnetic-alloy/noble-metal FeCo/Pt nanorods have been first reported and fabricated through a length-controllable catalyzing-synthesis process in which the growth of FeCo nanorods was induced on Pt nanotips. The length of FeCo/Pt nanorods depends on the number of platinum nanotips. The proposed synthesis mechanism was corroborated by scanning electron microscopy, transition electron microscopy, X-ray diffraction, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. With the decrease of Fe content in Fe(x)Co(96-x)/Pt(4) nanoalloys from 77 to 15, the morphology changes from nanorods with different lengths to nanoparticles. The analysis of the magnetic hysteresis loops indicated that the magnetic saturation and coercivity were strongly dependent on the length of the nanorods in which maximum saturation magnetization and minimum coercivity were obtained for Fe(77)Co(19)/Pt(4) nanorods with the length of ～2.5 μm. In particular, FeCo/Pt exhibited length-dependent reactivity towards 1,1,2,2-tetrachloroethane, and Fe(77)Co(19)/Pt(4) nanorods with the length of ～2.5 μm yielded the greatest dechlorination rate. Moreover, Pt can enhance the dechlorination of 1,1,2,2-tetrachloroethane.