Structure of ribitol diphosphite C5H7CLO5P2

Conclusions The compound C₅H₇Cl₅P₂, formed in the reaction of ribitol with PCl₃, has the structure 6-chloro-2,5,7,11,12-pentaoxa-1,6-diphosphatricyclo[7.2.1.0^4,8]dodecane.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 883–885, April, 1985.     

Synthesis and structural modification of <Emphasis Type="Italic">tert</Emphasis>-butyl ester of 7α-chloro-2-(N,N-dimethylaminomethylene)-3-methyl-1,1-dioxoceph-3-em-4-carboxylic acid

The reaction of tert-butyl 7α-chloro-and 7-β-chloro-7α-isopropoxy-3-methyl-1,1-dioxoceph-3-em-4-carboxylates with the Vilsmeier reagent was carried out with introduction of N,N-dimethylaminomethylene group at position 2 in the E-and Z-isomeric forms. Prolonged treatment of tert-butyl 7α-chloro-3-methyl-2-(N,N-dimethylaminomethylene)-1,1-dioxoceph-3-em-4-carboxylate with hydroxylamine hydrochloride in acetonitrile at 40–50°C gave tert-butyl 10(S)-chloro-6-methyl-5-oxa-1,1,9-trioxo-1-thia-4,8-diazatricyclo[7,2,0,0^2,6]undecane-7(R)-carboxylate which isomerized into 1-tertbutoxycarbonylmethyl-3α-chloro-4-(5-methylisoxazole-4-sulfonyl)azetidin-2-one. In the case of tertbutyl 7β-chloro-7α-isopropoxy-3-methyl-2-(N,N-dimethylaminomethylen)-1,1-dioxoceph-3-em-4-carboxylate the analogous reaction gave tert-butyl 10β-chloro-(2S,6S,7S,10R,11R)-10α-isopropoxy-6-methyl-5-oxa-1,1,9-trioxo-1-thia-4,8-diazatricyclo[7,2,0,0^2,6]undecane-7(R)-carboxylate, the struc-ture of which was determined by 2D-NOESY two-dimensional spectroscopy. The compounds synthesized showed weak or no cytotoxic activity with respect to monolayers of cancer cells in vitro.     

Organophosphorus Synthesis Without Phosphorus Trichloride: The Case for the Hypophosphorous Pathway

Abstract

The vast majority of organophosphorus compounds is currently synthesized from phosphorus trichloride (PCl₃), even though the final consumer products do not contain reactive phosphorus–chlorine bonds. In order to bypass phosphorus trichloride, significant interest has been devoted to functionalizing elemental phosphorus (P₄, the precursor to PCl₃), red phosphorus (P_red), or phosphine (PH₃). Yet, other industrial-scale precursors are hypophosphorous derivatives (H₃PO₂ and its alkali salts), but their use as phosphorus trichloride replacements has been completely overlooked. Here, the case is made for an alternative approach to the industrial synthesis of organophosphorus compounds based on hypophosphites.     

Reactions of p-quinone monoimines with lawesson reagent and phosphorus pentasulfide

2, 4-Bis-(4-methoxyphenyl)-1, 3, 2, 4-dithiadiphosphetane-2, 4-disulfide [Lawesson reagent (LR)] 1 reacts with p-quinone monoimine- 2a to give the novel benzo-1,3,2-oxathiaphosphol-5-(methanesulfonamido)-2-(4-methoxyphenyl)-2-sulfide 4 . On the other hand, the reaction of 2b and 3 with LR 1 leads to the formation of the benzo- and the naphtho-1,3,2-dithiaphosphol-5 -(benzenesulfonamido)- 2- (4-methoxyphenyl) -2-sulfide 5 , 6 . Thiation of 2a , 2b , and 3 with P₄S₁₀ yields phenoxathiin derivatives 8a , 8b , and 9 , respectively. The identity of the new products is established from analytical and spectroscopic evidence.     

Reaction of 5-oxo-2-phenyl-4,4-bis(trifluoromethyl)-4,5-dihydro-1,3,2-benzodioxaphosphepine with chloral. The synthesis and spatial structure of 5-carbaphosphatrane containing a four-membered ring

Phosphorylation of 2-hydroxyphenyl 2,2,2-trifluoro-1-hydroxy-1-(trifluoromethyl)ethyl ketone with dichloro(phenyl)phosphine gave 5-oxo-2-phenyl-4,4-bis(trifluoromethyl)-4,5-di-hydro-1,3,2-benzodioxaphosphepine. Heating of the latter initiated an intramolecular interaction of the P atom with the carbonyl group. Hydrolysis of the intermediate product yielded 3-hydroxy-2-oxo-2-phenyl-3-[2,2,2-trifluoro-1-hydroxy-1-(trifluoromethyl)ethyl]-2,3-di-hydro-1,2λ⁵-benzo[d]oxaphosphole. The reaction was highly stereoselective (P_RC_S/P_SC_R). The reaction of the starting phosphepine with chloral proceeded highly stereoselectively (P_RC_SC_S/P_SC_RC_R) to give a 5-carbaphosphatrane derivative containing a four-membered ring, namely, 1-phenyl-3-trichloromethyl-10,10-bis(trifluoromethyl)-6,7-benzo-2,4,8,9-tetraoxa-1λ⁵-phosphatricyclo[3.3.2.0¹,⁵]decene. The trigonal bipyramid of the 5-carbaphosphatrane derivative is made up of the equatorial O atoms and the apical C atoms.     

1H n.m.r. spectra of some bicyclic compounds: I—relative configurations of the diastereomeric endo-α-methyl-5-norbornene-2-methanols,the corresponding saturated analogues,and their cyclization ether products

The configurational and conformational relationship at C-2 and C-α in the two racemic diastereomeric endo-α-methyl-5-norbornene-2-methanols and the corresponding saturated endo-α-methyl-2-norbornanemethanols were determined by first-order analysis of the ¹H n.m.r. spectra of these compounds and of their cyclization ether products, i.e. 3-methyl-2-oxatricyclo[4.2.1.0^4,8]nonanes and 5-methyl-4-oxatricyclo[4.3.0.0^3,8]nonanes. In addition, the conformational preference of the hydroxyl group in the unsaturated and saturated alcohols was confirmed by the lanthanide induced shift technique, using Eu(fod)₃ as shift reagent, combined with a computer program involving various conformations of the –CHOHMe group.     

Phosphorus heterocycle synthesis using RPX2·AlX3 addition to 1,4-dienes—1

A new synthetic sequence of phosphorus heterocycles was developed using RPX₂·AlX₃ complex addition to 1,4-dienes. For example, the reactions of PhPX₂ (X=Cl, Br), CH₃PCl₂ and PCl₃AlCl₃ complexes with 1-allyl-cyclohex-1-ene to give two isomeric 2-phosphatricyclo [4.4.0.0^4,6] decanes (i.e.2 and4) accompanied by a phosphorus acid chloride (3) are described. Several transformations of2 into other ring systems, namely phosphadecaline and perhydrophosphindoline are mentioned.     

On Tetrachlorophosphonium Chlorometallates of Rhenium and Molybdenum: Syntheses,Crystal Structures,and Magnetism of [PCl4]2[Re2Cl10] and [PCl4]3[ReCl6]2, and the Magnetic Properties of [PCl4]2[Mo2Cl10]

MoCl₄, ReCl₄, and ReCl₅ react with PCl₅ in sealed glass ampoules at temperatures between 220° and 320° to [PCl₄]₂[Mo₂Cl₁₀] ( 1 ) [PCl₄]₂[Re₂Cl₁₀] ( 2 ), and [PCl₄]₃[ReCl₆]₂ ( 3 ). 2 crystallizes isotypically to the previously reported 1 and the respective titanium and tin containing analogues. The structure (triclinic, P1, Z = 1, a = 897.3(2), b = 946.0(2), c = 687.13(9) pm, α = 95.59(2)°, β = 95.80(2)°, γ = 101.07(2)°, V = 565.4(2) 10⁶ pm³) is built of tetrahedral [PCl₄]⁺ and edge sharing double octahedral [Re₂Cl₁₀]^2– ions and can be derived from a hexagonal closest packing of Cl^– ions with tetrahedral and octahedral holes partially filled by P(V) and Re(IV), respectively. 3 crystallizes isotypically to [PCl₄]₃[PCl₆][MCl₆] (M = Ti, Sn) (tetragonal, P 4₂/mbc, Z = 4, a = 1496.2(1), c = 1363.2(2) pm). Because no evidence was found for the presence of [PCl₆]^– ions, Re in 3 has to be of mixed valency with Re^IV and Re^V sharing the same crystallographic site. The structure can be derived from a cubic closest packing or alternatively from an only sparsely distorted body centered cubic arrangement of Cl^– ions which is rarely found for anion arrays. The tetrahedral and octahedral holes are partially filled by P^V and M^IV/V, respectively. Magnetic measurements show all three compounds to be paramagnetic and confirm the oxidation state IV for Mo and Re in 1 and 2 and the mixed valence (IV/V) for Re in 3 .     

Reaction of 3,4,4,5-tetrachloro-4H-1,2,6-thiadiazine with benzyltriethylammonium chloride

3,4,4,5-Tetrachloro-4H-1,2,6-thiadiazine was reacted with BnEt₃NCl (10?mol%) to give perchloro-9-thia-1,5,8,10-tetraazaspiro[5.5]undeca-1,4,7,10-tetraene (up to 18% yield), 4,5,6-trichloropyrimidine-2-carbonitrile (up to 44% yield) and four minor side products: 2,7-dichlorothiazolo[5,4-d]pyrimidine-5-carbonitrile, 2-(4-chloro-6H-thiazolo[5,4-c][1,2,6]thia-diazin-6-ylidene)malononitrile, 4,8-dichloropyrrolo[2′,1′:2,3]imidazo[4,5-c][1,2,6]thiadiazine-6,7-dicarbonitrile and 4,7-dichloro-[1,2,6]thiadiazino[3,4-b]thiazolo[5,4-e][1,4]diazepin-9(10H)-one. Single crystal X-ray studies support the structures of the minor products. Tentative rationale for the formation of these minor products and the synthesis of 8-bromo-4-chloropyrrolo[2′,1′:2,3]imidazo[4,5-c][1,2,6]thiadiazine-6,7-dicarbonitrile are presented.     

SOME PHOSPHORYLATED DERIVATIVES OF 1- AND 2-ADAMANTANOLS AND 1-ADAMANTYLAMINE

Abstract

The phosphorylation of 1- and 2-adamantanols and of 1-adamantylamine with POCl₃, PSCl₃, PhOP(O)Cl₂, 4-ClC₆H₄OP(O)Cl₂, and PCl₃ is described and the conversion of the obtained phosphorochloridates into a number of derivatives such as phenylhydrazides, diamidates, hydrazides, hydrazones and azides is reported.     

Microwave mediated reduction of heterocycle and fluorine containing nitroaromatics with Mo(CO)6 and DBU

Heterocycle containing nitroaromatics were reduced by Mo(CO)₆ and DBU in EtOH under microwave irradiation within 15 min. Under the same conditions, 4-fluoronitrobenzene was reduced to 4-fluoroaniline, whereas 2-chloro-1-fluoro-4-nitrobenzene afforded a mixture of 3-chloro-4-fluoroaniline and 3-chloro-4-ethoxyaniline. The extent of the competing S_NAr/reduction process could be influenced by the nature of the solvent, with t-BuOH the inert solvent of choice. The latter was used as solvent for S_NAr/reductions of 2-chloro-1-fluoro-4-nitrobenzene with S-nucleophiles to yield 3-chloro-4-mercaptoanilines.     

Organo–Phosphorus–Sulfur Heterocycles by Reactions of Phenylphosphine with Ketones

Abstract

The reaction of phenylphosphine (PhPH₂) with ketones showed conversion into a 5-membered heterocyclic ring of the type P₂SOC if 2–2.5 equivalents of sulfur (S₈) were used. X-Ray data and ³¹P, ¹³C, ¹H NMR spectra proved the formation of the (Z) diastereomer of 1,3,2,4-oxathiadiphospholane 1 ((PhPS)₂SOCMe₂) if acetone is used. Mechanistic studies displayed that small changes in the reaction pathway lead toward the formation and characterization of intermediates including 1,3,2,4,5-dithiatriphospholane, 2,4,5-triphenyl-2-sulfide (PhP)₃S₃ and 1,3,2,4-oxathiadiphospholane, and 5,5-dimethyl-2,4-diphenyl-2-sulfide ((PhPS)(PhP)SOCMe₂), which undergo reactions with acetone, subsequently yielding the abovementioned heterocyclic ring.     

Synthesis,Crystal Structure,and Bonding of (PCl4)2[Mo2Cl10], the First Compound in Mo–P–Cl System

An ampule reaction between Mo and PCl₅ at 200 °C yielded (PCl₄)₂[Mo₂Cl₁₀], the first ternary compound in Mo–P–Cl system. Single crystal X-ray diffraction gave a triclinic unit cell: a = 6.870(1), b = 8.892(2), c = 9.423(2) Å, α = 100.24(2), β = 95.55(2), γ = 96.12(2)° (V = 559.3(2) ų, Z = 1, sp. gr. P1, wR₂ = 0.0575 and R₁ = 0.0279. The ionic compound is built from edge sharing bioctahedra [Mo₂Cl₁₀]^2– and two tetrahedra PCl₄⁺. The averaged Mo–Cl_b distance, 2.503(1) Å, is longer than the Mo–Cl_t distance, 2.33(2) Å. The Mo … Mo distance, 3.77 Å, indicates the absence of a direct Mo–Mo interaction. Semiempirical and ab initio calculations showed the possibility for [Mo₂Cl₁₀]^2– to exist with long and short Mo to Mo distances, the letter corresponding to the Mo–Mo bond.     

The unambiguous synthesis and NMR assignment of 4-alkoxy and 3-alkylquinazolines

Contrary to a number of reports, alkylations of the privileged 3,4-dihydroquinazoline scaffold provide N3-alkylated products, and not 4-alkoxyquinazolines. To correctly assign the structure, ¹³C NMR shifts of the –Z–CH_n– (Z=O, N) fragment are necessary; resonances in the 45–55 ppm range are indicative of N3-alkylation. Treatment of 3,4-dihydroquinazoline-4-one with p-TsCl afforded the N3-tosylated compound, whose reaction with an amine yielded the corresponding N3-alkyl derivative. A mechanism corroborated by ¹⁵N-labeling involving pyrimidine ring opening and recyclisation is proposed. Finally, the unambiguous preparation of 4-alkoxyquinazolines is described via treatment of 3,4-dihydroquinazoline-4-ones with PCl₅ followed by an alkoxide.     

Synthesis of 3-(2-benzothiazolylthio)propanenitrile and related products

The reaction of 2-mercaptobenzothiazole, 2-mercaptobenzoxazole or 5-chloro-2-mercaptobenzothiazole with either acrylonitrile or acrylamide under basic conditions afforded the N-cyanoethylated products 1, 2 and 3 or the N-amidoethylated products 4, 5 and 6 , respectively. The reaction of the sodium salts of the same thiazolethiols with 3-chloropropionitrile furnished a mixture containing the N-cyanoethylated products 1, 2 and 3 and the unknown S-cyanoethylated products 7, 8 and 9 , respectively. Whereas, substituting 3-chloropropionamide for 3- chloropropionitrile in the same reaction gave only the S-substituted products 10, 11 , and 12 , respectively. The treatment of 10, 11 or 12 with phosphorus oxychloride or thionyl chloride in DMF afforded 7, 8 and 9 in excellent yields. Possible mechanisms and supporting nmr data are discussed.     

The Purification of PCl3 from Pv by interaction with active silica

It was found, that the addition of silica gel to PCl₃ prevents its oxidation and acts as an adsorbent of P^v impurities. The concentration of P^v impurities is diminished below 0,1% calculated as H₃PO₄. The velocity of purification depends on the kind of silica gel, on its amount and on the volume of the liquid above the adsorbent layer. For the purification of technical grade PCl₃ with an impurity level below 1% H₃PO₄ the small pore or middle pore silica gel in amounts of 10% in relation to PCl₃ may be used. In case of PCl₃, oxidated to a level of 2.6% P^v, as H₃PO₄, the velocity of purification was higher for the middle pore silica gel. An attempt is made to explain the action of silica gel on theoretical backgrounds.     

Ein Neues,tricyclisches schwefelreiches Phosphan

A New Tricyclic Sulfur-rich Phosphane From the products of the reaction of P₄S₃ with tert-Butyliodide the compound (t-Bu(S)P)₂P₄S₃ was isolated in low yield. The compound is stable and has a structure related to the hydrocarbon brexane. By reaction with triphenylphosphin the compounds (t-BuP)(t-Bu(S)P)P₄S₃ and (t-BuP)₂P₄S₃ were obtained. The ³¹P-nmr spectra of all compounds were solved and used to determine the structure of the molecules. A complete set of ³¹P-nmr data is given.     

Synthesis,characterization, and biological activity of some aza‐uracil derivatives

Thiation of 1 by LR gave the corresponding 3,5‐dithioxo derivative 2 and the trimer 3 . Methylation of 1 afforded the S‐methyl derivative 4 . Compound 1 was fused with 6‐bromo‐2‐phenyl‐benzo[1,3‐d]oxazin‐4‐one ( 5 ) and gave 6 . Condensation of 1 with some acid derivatives 7a , 7b , 7c , 7d and/or 8a , 8b , 8c yielded thiadiazolo‐triazine derivatives 9a , 9b , 9c , 9d and 10a , 10b , 10c . Compounds 9a , 9c and 10c were hydrolyzed to furnish 11a , 11b , 11c Acetylation of 14 afforded mono‐ and diacetyl‐derivatives 15 and 16 . Benzoylation of 14 afforded mono‐ and dibezoyl‐derivatives 17 and 18 . 14 with some aromatic aldehydes yielded 9a , 9b , 9c . Reacting 14 with phenyl (iso‐ and/or isothio‐) cyanate gave the urea derivatives 20a , 20b . Thiation of 14 with P₄S₁₀ furnished 21 . The newly synthesized compounds were tested as antimicrobial agents. J. Heterocyclic Chem., (2011)     

Two-step conversion of 3,4,4,5-tetrachloro-4H-1,2,6-thiadiazine into 4,5,6-trichloropyrimidine-2-carbonitrile

Tin reduction of 3,4,4,5-tetrachloro-4H-1,2,6-thiadiazine afforded perchloro-9-thia-1,5,8,10-tetraazaspiro[5.5]undeca-1,4,7,10-tetraene (10%) and 3,5-dichloro-4H-1,2,6-thiadiazine-4-thione (27%), the structures of which were supported by single crystal X-ray crystallography. Treating the tetrachlorothiadiazine with Ph₃P (1 equiv.) afforded the corresponding spirocycle in a useful 66% yield, the degradation of which with BnEt₃NCl (0.5 equiv.) afforded densely functionalized 4,5,6-trichloropyrimidine-2-carbonitrile in 81% yield. Rational mechanisms for the formation of products are proposed.     

Regioselective preparation of vinyl chlorides from 2-methylcyclohexanone

Treatment of 2-methylcyclohexanone with PCl₅, in hexane at reflux gives predominantly 2-ch1oro-3-methylcyclohexene (3). ⁵On the other hand, treatment with catechyl phosphorus trichloride followed by alcoholic KOH gives predominantly the isomeric viny1 chloride, 1-chloro-2-methylcyclohexene (4).