THE CRYSTAL AND MOLECULAR STRUCTURE OF THE POTENTIAL ANTIBACTERIAL AGENT 2-PYRIDYL-PHENYL SULPHONE

Abstract

Crystals of 2-pyridyl-phenyl sulphone are monoclinic, space group P2₁/c, with eight molecules in the unit cell of dimensions a = 11.781, b = 5.903, c = 29.748 Å and B = 94.13°. The dihedral angles between the best planes of the two aromatic rings are significantly different in two crystallographically independent molecules (88.4° and 71.9° for molecule A and molecule B, respectively), as well as those between the CSC plane and the pyridine ring (59.4° and 67.4°) and between the CSC plane and the phenyl ring (51.7° and 81.8°). The average bond distances of interest include C?S 1.77(1) and S?O 1.44(1) Å; among the bond angles there are CSO = 108.1(7), CSC = 105.0(6) and OSO = 118.7(6)°. The packing of the molecule in the crystal is determined by the van der Waals interactions and by two intermolecular H?O contacts of 2.43 and 2.49 Å. The observed conformation in the solid state agrees well with results of previous investigations, in the solution state, by means of dipole moment method and theoretical M.O. calculations, for the analogous di-2-pyridyl sulphone.     

DERIVATIVES OF 4-CHLORO-3,5-DINITROBENZOTRIFLUORIDE V. SYNTHESIS OF 4,6-DINITRO-2,8-BIS(TRIFLUOROMETHYL) PHENOTHIAZINE (1), ISOPROPYL 2,6-DINITRO-4-TRIFLUOROMETHYLPHENYL SULFIDE (2) AND BIS(2,6-DINITRO-4-TRIFLUOROMETHYLPHENYL) DISULFIDE (3)

Abstract

The reaction of potassium isopropyl dithiocarbonate with 4-chloro-3,5-dinitrobenzotrifluoride in dimethylformamide at 25–30°C afforded the titled phenothiazine (1) and sulfide (2). The reaction of bis(2,6-dinitro-4-trifluoromethylphenyl)-sulfide or the above halogen compound with sodium hydrosulfide in the same solvent at 80–90°C furnished 1. At 25–30°C the latter reaction afforded the titled disulfide (3). Possible mechanisms and supporting nmr, ir and mass spectral data are discussed.     

THE CRYSTAL STRUCTURES OF AMMONIUM AND SODIUM 2-AMINO-3,5-DICHLOROBENZOATES

Abstract

The crystal structures of ammonium and sodium 2-amino-3,5-dichlorobenzoates were determined by the X-ray diffraction method. The ammonium salt crystallizes in the monoclinic system (space group P2₁/c) with a = 13.941(3), b = 9.128(3), c = 7.349(2) Å, β = 90.80(3)° and Z = 4. The structure consists of an ammonium cation hydrogen bonded to a carboxylate oxygen of the 2-amino-3,5-dichlorobenzoate anion. The sodium salt of 2-amino-3,5-dichlorobenzoic acid crystallizes in the triclinic system (space group P 1) with a = 8.033(2), 6 = 8.944(2), c = 17.350(3) Å, α = 76.72(3)°, β = 79.69(3)°, γ = 72.54(3)° and Z = 4. The compound is a polymer in which the sodium ions are coordinated by carboxylate oxygen atoms of the organic ligand and water molecules in an octahedral arrangement. IR spectra of the salts are discussed.     

STEREOCHEMISTRY OF (R)-2-METHYLAZIRIDINE COMPLEXES OF COBALT(III) AND DIMERIZATION OF THE LIGAND

Abstract

A cobalt(III) complex containing (R)-2-methylaziridine (R-meaz), [Co(R-meaz)(NH₃)₅]³⁺, was prepared and the two diastereomers arising from the presence of the chiral nitrogen atom (N(R) and N(S)) were separated by column chromatography. Molecular mechanics calculations estimated the N(R)-isomer to be more stable. This result was supported by the x-ray structure determination of the more abundant (ca. 94%) isomer, N(R)-[Co(R-meaz)(NH₃)₅]Br₃H₂O. Crystal data: monoclinic, P2₁, a = 7.357(1), b = 9.780(1), c = 10.426(1) Å, μ = 93.58(1)°, V= 748.7(3) ų, Z= 2. Kinetic studies of isomerization (epimerization) between the two isomers revealed that inversion at the nitrogen center was very slow (5 × 10^?2 M^?1 S^?1at 25 °C). The small rate constant seems to be related to the strained three-membered structure of the meaz ligand. The reaction of Na₃[Co(N0₂)6] and R-meaz yielded a complex containing two dimerized R-meaz chelates, trans-[Co(NO₂)2(di-R-meaz)₂] (di-R-meaz =RR)-α,2-dimethyl-l-aziridineethanamine). The crystal strucrure of trans-[Co(NO₂)₂ (di-R-meaz)₂]C1O₄H₂O was established by x-ray crystallography. Crystal data: orthorhombic, P2₁2₁2₁, a = 11.784(6), b = 21.023(9), c = 8.608(7) Å, V = 2133(2) ų, Z = 4.     

Novel thermoresponsive water-soluble oligomers based on amphiphilic calixresorcinarenes

Novel water-soluble thermoresponsive oligomers TO1 and TO2 were obtained by reaction of amidoamine tetramethylcalixresorcinarenes (C1) and tetrapentylcalixresorcinarenes (C5) with ethylene glycol diglycidyl ether. The compounds were characterised by ¹H and FT-PGSE NMR, FTIR, static light scattering and elemental analysis. The thermoresponsive properties of oligomers were investigated by spectrophotometry, DLS, FT-PGSE NMR and TEM. The cloud points of oligomers (43 °C for TO1 (5 mg/ml) and 41 °C for TO2 (1.2 mg/ml), respectively) were determined. The influence of salts effect on TO2 cloud points was investigated. The binding of anti-inflammatory drug naproxen (Nap) at 20 °C by TO1 and TO2 and its partial release at cloud points of oligomers in aqueous solution are observed using fluorescence and FT-PGSE NMR methods. New example of creating of thermoresponsive macrocyclic systems on the basis of amidoamine calixresorcinarenes with possibility of substrate binding and release under the influence of termo-stimuli in an aqueous solution was shown.     

A CONVENIENT SYNTHESIS OF 2,4-DIARYLPOLYHYDROQUINOLINE DERIVATIONS IN THE PRESENCE OF AMMONIUM ACETATE

ABSTRACT

A series of substituted 5-oxo-1,2,3,4,5,6,7,8-octahydroquinoline derivatives have been synthesized from 5,5-dimethyl-1,3-cyclohexane-dione (dimedone) and 1,3-diaryl-2-propen-1-one in DMF at 80°C in the presence of ammonium acetate with high yields (64–98%), the structure of the product was confirmed by X-ray analysis.     

SYNTHESIS OF POLYURETHANES CONTAINING DIOXYBENZYLIDENECYANOACETATE AS AN NLO-CHROMOPHORE FOR ELECTRO-OPTIC APPLICATIONS

Methyl 2,4-di-(2'-hydroxyethoxy)benzylidenecyanoacetate (3) was prepared by hydrolysis of methyl 2,4-di-(2'-vinyloxyethoxy)benzylidenecyanoacetate (2). Diol 3 was condensed with 2,4-toluenediisocyanate and 3,3'-dimethoxy-4,4'-biphenylenediisocynate to yield polyurethanes 4 and 5 containing the NLO-chromophore 2,4-dioxybenzylidenecyanoacetate. The resulting polyurethanes were soluble in common organic solvents such as acetone and DMF. T _g values of the polymers obtained from DSC thermograms were in the range of 101–114°C and electro-optic coefficient (r ₃₃ ) of the poled polymer films was in the range of 12–15 pm/V at 633 nm. Polymers 4 and 5 showed a thermal stability up to 300°C in TGA thermograms, which is acceptable for NLO device applications.     

The Reaction of 1-Nitro-4-(4-nitrophenylsulfonylmethyl)benzene with α,β-Unsaturated Esters

Under solid-liquid PTC conditions, treatment of 1-nitro-4-(4-nitrophenylsulfonyl-methyl)benzene(1) with α,β -unsaturated esters (2a-h) at 35–75°C gave tandem addition-rearrangement products(3a-h). While at higher temperature(75°C), addition-rearrangement-addition products (4a-b) were obtained when acrylates were used. Finally a possible mechanism is proposed.     

CONTACT STABILIZATION OF HOST COMPLEX MOLECULES DURING CLATHRATE FORMATION: THE PYRIDINE-ZINC NITRATE AND THE PYRIDINE-CADMIUM NITRATE SYSTEMS

Abstract

Clathrate formation ranges of the phase diagrams of two binary systems Py-Zn(NO₃)₂ and Py-Cd(NO₃)₂ (Py = pyridine) were studied. A clathrate of composition [MPy₄(NO₃)₂]·2Py (M = Zn, Cd) was observed in each of the systems. The space group Ccca (orthorhombic system) and the parameters of the unit cells of both clathrates were determined by X-ray analysis of their single crystals. The data obtained show them to be isostructural with the clathrate [NiPy₄(NO₃)₂]·2Py whose structure is known and suggest the actual presence of the host molecules trans-[MPy₄(NO₃)₂] (M = Zn,Cd) inside the clathrate phases. Host complexes do not form as separate compounds but can only arise in clathrate phases due to contact stabilization by the guest molecules. Both Zn- and Cd-clathrates are of constant composition and melt incongruently at 62.3(6) and 106.0(5)°C, respectively, yielding the complexes [ZnPy₃(NO₃)₂] and [CdPy₃(NO₃)₂], these melting congruently at 131.4(5) and 169.5(5)°C, respectively. During thermal decomposition under quasi-equilibrium conditions with different pressures of the liberating pyridine both clathrates also decompose in one stage, giving [MPy₃(NO₃)₂] complexes. The results obtained are discussed in relation to a number of other systems with Schaeffer's and Hofmann-lwamoto's clathrates in which contact stabilization occurs or might be expected to occur.     

EQUILIBRIUM STUDIES OF THE REACTION BETWEEN TETRACHLOROPALLADIUM(II) ANION AND SULFOXIDES. THE FORMATION OF THE MONO-S-SULFOXIDE COMPLEXES

Abstract

The equilibrium coefficient, K₁, for the reaction [PdCl₄]^2- + RR′ SO ? [Pd(RR′ SO)Cl]^? + Cl^?, has been determined for dimethylsulfoxide, tetramethylensulfoxide, and phenylmethylsulfoxide and found to be 67, 46 and 8.8 respectively at 25°C, ü= 1.0 in 95:5 methanol-water. Values for the equilibrium constants for the dimethylsulfoxide complex are also reported at other ionic strengths. The equilibrium constants for the second stage, [Pd(Me₂SO)Cl₃]- + Me₂SO)?-[Pd(Me₂SO)₂Cl₂] + Cl^?, has been determined for dimethylsulfoxide only, K₂=2.5 × 10^?2 at 25°C (μ not controlled). The causes of the mutual destabilisation of two dimethylsulfoxides are discussed.     

Synthesis and properties of mesogenic laterally fluorinated compounds containing benzoxazole unit

Series of mesogenic laterally fluorinated compounds, 2-(2′,3′-difluoro-4′-alkoxybiphenyl-4-yl)-benzoxazole derivatives (nB-Fx) bearing different substituents (H, CH₃, Cl, NO₂, coded as nB-FH, nB-FM, nB-FC and nB-FN, respectively) at 5-position, were prepared and characterised. Their phase transition behaviour was investigated by differential scanning calorimetry and polarising optical microscopy. nB-Fx with alkoxy chain lengths of 2 to 10 carbons exhibited enantiotropic mesophases, for which the mesophase ranges were 0°C–58°C and 0°C–71°C on heating and cooling for nB-FH, 41°C–93°C and 66°C–140°C for nB-FM, 44°C–133°C and 87°C–155°C for nB-FC, and 0°C–76°C and 0°C–95°C for nB-FN, respectively. Compared to non-fluorinated analogues, with the exception of nB-FC, fluorinated nB-Fx mainly exhibited nematic mesophase both in heating and cooling, which were attributed to the disruption of the side-to-side intermolecular packing caused by the two ortho-lateral fluoro substituents. For nB-Fx series, nB-FM, nB-FC and nB-FN exhibited a much wider mesophase range than the corresponding nB-FH series, which indicated that the substituent at benzoxazole moiety was helpful in increasing the mesophase stability. With the exception of nB-FN, the nB-Fx series displayed intense photoluminescence emission at 379–383 nm in methylene chloride solution, when it was excited at its absorption maxima.     

SYNTHESIS AND MOLECULAR STRUCTURE OF [Cu(μ-OC6H3-2,6-Me2)(thd)]2: A LIGAND-MEDIATED REDUCTION TO METALLIC COPPER

Abstract

The reaction between barium 2,6-dimethylphenoxide (1) and copper 2,2,6,6-tetramethylheptane-3,5-dionate gave the volatile β-diketonatoaryloxide [Cu(μ-OC₆H₃-2,6-Me₂)(thd)]₂ (2). The complex was characterized by elemental analysis, IR and ESR spectroscopy as well as single-crystal X-ray diffraction. It crystallises in the space group P2₁ /c with a = 6.602(2), b = 24.454(5), c = 12.391(4) Å, β = 95.49(2)°. TGA experiments at 1 atmosphere show that 2 is volatile and decomposes at 292°C to metallic copper by a ligand-mediated reduction.     

THE ENANTIOMERISM OF 2-THIONO-2-MERCAPTO-DIBENZO-(d,f)(1,3,2)-DIOXOPHOSPHEPIN

Abstract

The bridged biphenyl system in the molecule of 2-thiono-2-mercapto-dibenzo-(d, f)(1,3,2)-dioxophosphepin is twisted and dissymmetric. The two enantiomers were resolved by cinchonidine and cinchonine, having [α]²² _D = (+)9.37° and (?)8.94° respectively. They are optically stable at 20°C in benzene, but racemized readily in methanol. The U.V. spectra give a torsional angle of the racemic acid as 24.6°.     

Synthesis of 1,2-bis[2-methyl-5(3,4-difluorophenyl)-3-thienyl] perfluorocyclopentene

2-Methylthiophene (1) was treated at 0°C with liquid bromine to form 3,5-dibromo-2-methylthiophene (2) which reacted with tributyl borate to give 2-methyl-3-bromo-5-boronate thiophene (3) at −78°C. Treatment of 3 with 3,4-difluorobrombenzene gave 2-methyl-3-bromo-5-(3,4-difluorophenyl)thiophene (4). Finally, a novel photochromic dithienylethene compound, 1,2-bis [2-methyl-5(3,4-difluorophenyl)-3-thienyl]perfluorocyclopentene (DT-1), was synthesized by the reaction of 4 with perfluorocyclopentene at −78°C. The compound (DT-1) was characterized by IR, NMR, MS, elemental analysis and its photochromic behavior was also discussed. __________ Translated from Chinese Journal of Organic Chemistry, 2007, 27(10): 1282–1284 [译自: 有机化学]     

GC-FID optimization and validation for determination of 3,4-methylenedioxymethamphetamine, 3,4-methylenedioxyamphetamine and methamphetamine in ecstasy tablets

A methodology for the determination of 3,4-methylenedioxymethamphetamine (MDMA), 3,4-methylenedioxyamphetamine (MDA) and methamphetamine (MA) in seized tablets using gas chromatography with a flame ionization detector (GC-FID) is described. The chromatographic conditions, i.e. gas flow rates and temperatures for the column, injector and detector were optimized. The optimum chromatographic conditions were as follows: a CP-SIL 24 CB WCOT fused silica capillary column (30 m × 0.32 mm I.D., 0.25 μm film thickness), N₂ carrier gas flowing at 2.6 mL/min, injector temperature at 290°C and detector temperature at 300°C. The oven temperature was ramped from 80°C at a rate of 20°C/min to final temperature of 270°C (1 min). All analytes were well separated within 7 min with an analysis time of 10.5 min. Calibration curves were linear over the concentration ranges of 3.125–200 μg/mL for MDMA and 6.25–200 μg/mL for MDA and MA (r > 0.990). The intra- and inter-day precisions for determining all analytes were 2.32–10.38% RSD and 1.15–9.77% RSD, respectively. The intra- and inter-day accuracies ranged from −19.79 to +17.51% DEV and −6.84 to +5.2% DEV, respectively. The lower limits of quantification (LLOQs) were 3.125 μg/mL for MDMA and 6.25 μg/mL for MDA and MA. All analytes were stable at room temperature during 24 h but significant loss occurred after 2-month storage at −20°C. The method was shown to be useful for determining the purity of MDMA in seized tablets.     

STRUCTURES OF PYRIDINE CARBOXYLATE COMPLEXES OF COBALT(II) AND COPPER(II)

Abstract

The syntheses and crystal structures of [Co(nic)₂(H₂O)₄] (1). [Co(iso)₂(H₂O)₄] (2). [Cu(nic)₂(H₂O)₄] (3), and [Cu(iso)₂(H₂O)₄] (4) (nic = nicotinate; iso = isonicotinate) are reported. Complex 1 crystallizes in monoclinic, space group C2/m with cell parameters a =14.150(4). b = 6.883(2)., c = 8.497(2) Å, β= 118.28(2)° and Z = 2. The other crystals. 2. 3. and 4. are all triclinic, Pī; a = 9.777(3), b = 6.348(4), c = 6.888(3)Å, a= 113.10(6)., β= 110.55(3). γ = 97.61(5)°, and Z=l for 2; a = 7.0281(4), b = 7.7176(6), c = 8.6978(7)Å, a = 68.103(7), β = 68.526(5), γ = 62.550(6)°, and Z=1 for 3; a = 9.1807(4), b = 6.3334(3), c = 6.8871(3)Å, a= 108.213(4), β = 99.433(4), γ= 105.190(4)°, and Z= 1 for 4. The arrangements around the metal ions are trans-octahedra with two pyridyl nitrogens and two aqua oxygens in the equatorial positions and two aqua oxygens in the axial positions, although the Cu(II) complexes show a larger Jahn-Teller distortion.     

SYNTHESIS AND STRUCTURAL CHARACTERIZATION OF TRIS(DIMETHYLDITHIOCARBAMATE) INDIUM(III), In[S2CN(CH3)2]3

Abstract

The synthesis and structure of the indium dithiocarbamate, In[S₂CN(CH₃)₂]₃·(1/2) 4-mepy (4-mepy=4-methylpyridine), is described. Indium metal was oxidized by tetramethylthiuram disulfide in 4-methylpyridine at 25°C to form a new, homoleptic indium(III) dithiocarbamate in yields exceeding 60%. In[S₂CN(CH₃)₂]₃ exists as a discrete molecule with a distorted-octahedral geometry. The compound crystallizes in the P 1 (No. 2) space group with a=9.282(1)Å, b=10.081(1)Å, c=12.502Å, α=73.91(1)°, β=70.21(1)°, γ=85.84(1)°, Z=2, V(Å)=1057.3(3), R=0.046 and R_w =0.061.     

Interaction of the general volatile anesthetic Enflurane with bacteriorhodopsin-DPPC proteoliposomes

Thermal decomposition of dried crystalline powder obtained from titanium(IV) bis(acetylacetonate) diisopropoxide (75% solution in 2-propanol) (1) was monitored by simultaneous TG/DTA, EGA-FTIR and EGA-MS measurements and the results were compared with those of amorphous powder obtained by gelling of acetylacetonate-modified titanium(IV) tetra-isopropoxide at molar ratio of 1:2 in boiling 2-methoxyethanol (2). Thermal degradation of 1 in the temperature range of 25–700°C consists of 5 steps with a total mass loss of 62.5%. EGA by FTIR and MS revealed the release of H₂O below 120°C; followed by an intensive evolution of acetylacetone around 245°C. The release of acetone and acetic acid occurs up to 270°C and that of CO and CO₂ up to 530°C.     

Synthesis and Properties of Polyamides and Polyimides Derived From Diamines Having 2-Phenyl-4,5-Oxazolediyl Units and Polyamide/Montmorillonite Composite

Aromatic polyamides were synthesized from 4,5-bis(4-aminophenyl)-2-phenyloxazole (APO) or 4,5-bis[4(4-aminophenoxy)phenyl]-2-phenyloxazole (APPO) containing 2-phenyl-4,5-oxazolediyl units with several aromatic carboxylic dichlorides by a low-temperature solution polycondensation method. The polyamides were obtained quantitatively, and their inherent viscosities ranged from 0.48 to 1.25 dL g^?1. The glass transition temperatures (T _gs) were displayed between 234 to 311°C, and the residual weight at 600°C (Res.wt₆₀₀) exceeded 52% in nitrogen atmosphere. The polyamides showed good solubility in several aprotic polar solvents, such as N,N-dimethylacetoamide (DMAc), N-methyl-2-pyrrolidone (NMP), and dimethyl sulfoxide (DMSO). Aromatic polyimides were derived from APO or APPO with aromatic carboxylic dianhydrides through polyamic acids. The inherent viscosities of the polyamic acids, which were 0.53 to 1.02 dL g^?1, T _gs of the polyimides were observed between 259 to 361°C and their Res.wts₆₀₀ were above 70%. The polyamides and polyimides were amorphous and afforded thin, flexible and tough films. We also prepared a nanocomposite of the polyamide derived from APPO with organophilic montmorillonite clay.     

A STUDY ON THE TRANSESTERIFICATION REACTION OF DIMETHYL AND DIETHYL PHOSPHITE WITH 1,3-DICHLOROPROPANOL-2

Abstract

The transesterification process of dimethyl and diethyl phosphite with 1,3-dichloropropanol-2 is examined. It is found that the reaction proceeds in the absence of catalyst at a temperature of 155°, whereas in the presence of morpholine as a catalyst it takes place at 126°C. The transesterification of dimethyl phosphite and diethyl phosphite with 1,3-dichloropropanol-2 is accompanied by the evolution of dimethyl and diethyl ethers and alkyl halides (methyl chloride and ethyl chloride).