Preparation and Radical Oligomerization of anFe(II) Complex without Loss of Spin-Crossover Properties

Summary.  11-(4H-1,2,4-Triazol-4-yl)-undecylmethacrylate (1), a new ligand for Fe(II) spin-crossover (SCO) complexes containing a polymerizable group, was synthesized and characterized. The complex [Fe·1 ₃](BF₄)₂ (2) was obtained by reaction of 1 with Fe(BF₄)₂·6H₂O (molar ratio 1/Fe(II) = 3/1) in THF. Complex 2 showed a gradual spin-crossover between 80 and 230 K. The methacrylate units in the ligands of complex 2 could be oligomerized radically in solution (initiator: azoisobutyronitrile) without loss of the spin-crossover behaviour. Received May 30, 2000. Accepted December 10, 2000     

Preparation and Radical Oligomerization of anFe(II) Complex without Loss of Spin-Crossover Properties

 11-(4H-1,2,4-Triazol-4-yl)-undecylmethacrylate (1), a new ligand for Fe(II) spin-crossover (SCO) complexes containing a polymerizable group, was synthesized and characterized. The complex [Fe·1 ₃](BF₄)₂ (2) was obtained by reaction of 1 with Fe(BF₄)₂·6H₂O (molar ratio 1/Fe(II) = 3/1) in THF. Complex 2 showed a gradual spin-crossover between 80 and 230 K. The methacrylate units in the ligands of complex 2 could be oligomerized radically in solution (initiator: azoisobutyronitrile) without loss of the spin-crossover behaviour.     

Self-Assembly and Crystal Structures of Supramolecular (H2O)38 Water Morphology in a Coordination Complex Crystal Host

Abstract  A mono-nuclear copper (II) complex 1, formulated {[Cu(phen)₂(CO₃)]·7H₂O} has been synthesized and characterized by X-ray diffraction studies, FTIR, and thermogravimetric (TG) analysis. However, there is a self-assembly structure of (H₂O)₃₈ cluster in this complex 1, and it is worth reporting. The adjacent (H₂O)₃₈ clusters connect together resulting in an infinite 2D water layer structure. The water morphology is stable at room temperature, but upon thermal decomposition, the water loss is irreversible. Graphical Abstract  A mono-nuclear copper (II) complex 1, formulated {[Cu(phen)₂(CO₃)].7H₂O} has been synthesized and characterized by X-ray diffraction studies, FTIR, and thermogravimetric (TG) analysis. However, there is a self-assembly structure of (H₂O)₃₈ water cluster in this complex 1, and it is worth reporting. The discrete (H₂O)₃₈ cluster connects together resulting in an infinite 2D water layer structure. The alternate arrangement of the complex 1 and the 2D water layer produce infinite through-channels along a axis direction, and the part moieties of complex 1 are located inside these channels. The water rings are stable at room temperature, and when thermally decomposes the water loss is irreversible. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Electrospray Ionization Mass Spectrometry of Palladium(II) Quinolinylaminophosphonate Complexes

The mass spectrometric behavior of palladium(II) halide complexes of three types of quinolinylaminophosphonates, diethyl and dibutyl esters of [α-anilino-(quinolin-2-yl)methyl]phosphonic (L1, L2), [α-anilino-(quinolin-3-yl)methyl]phosphonic (L3, L4), and [α-(quinolin-3-ylamino)-N-benzyl]phosphonic acid (L5, L6), was investigated under positive ion electrospray ionization conditions. Each type of ligand forms complexes with different metal–ligand interactions. Mononuclear dihalide adducts cis-[Pd(L1/L2)X₂] (1–4) and trans-[Pd(L3/L4)₂X₂] (5–8) as well as dinuclear tetrahalide complexes [Pd₂(L5/L6)₃X₄] (9–12) (X = Cl, Br) are formed by metal bonding either through the quinoline or both the quinoline and amino nitrogen atoms. The sodiated molecule [M + Na]⁺ is observed in the mass spectra of all the complexes, and its abundance as well as the fragmentation pathway depend on the type of the complex. In the cis complexes (1–4) the initial decomposition goes under two fragmentation routes: those in which the sodium molecular adduct sequentially loses halides HX/NaX and those in which this loss is in the competition with the loss of dialkyl phosphite. The predominant pathways for decomposition of trans dihalide (5–8) and tetrahalide (9–12) complexes include three competitive reactions; the loss of halides, dialkyl phosphites and the intact phosphonate ligand molecule and its fragments formed by ester dissociation or complete loss of the phosphonate ester moiety. A series of acetonitrile adducts and cluster ions derived from dimolecular clusters [2M + Na]⁺ were also detected. The most important fragmentation patterns are rationalized and supported by the MS ⁿ studies.     

Synthesis and crystal structure of Cu(I) and Ni(II) complexes of 1,1-diethyl-3-(4-fluorobenzoyl)-thiourea

The reaction of 1,1-diethyl-3-(4-fluorobenzoyl)-thiourea (HL) with CuCl₂ ·?2H₂O and NiCl₂ ·?6H₂O give two complexes, Cu(HL)₃Cl (1) and NiL₂ (2). The crystal structures of these products were determined by single crystal X-ray diffraction. In 1, three HL molecules are unidentate, coordinating through the sulfur, and the copper is tetrahedral with three S and one Cl. In 2, two HL molecules are O and S donor bidentate and coordinate as anionic species with loss of the proton from the acyl-substituted nitrogen; the nickel is square-planar.     

Structural aspects of a trimetallic CuII derivative: cytotoxicity and anti-proliferative activity on human cancer cell lines

A trimetallic Cu^II derivative, [Cu₃(L)₂(CF₃COO)₂] (1) (where H₂L = N,N′-bis(salicylidene)-1,3-propanediamine), was prepared and characterized. In 1, the two terminal Cu^II ions are linked to the central Cu^II by trifluoroacetato and doubly bridging phenoxido. Both the square-pyramidal and octahedral geometries are observed among two different Cu^II centers in the linear arrangement of the trimetallic unit. Compound 1 is characterized by IR and UV-Vis spectra. Compound 1 has high cytotoxic activity in breast adenocarcinoma (MCF-7), colorectal carcinoma (HCT116) and particularly, in ovarian carcinoma (A2780) cell line compared to a lung adenocarcinoma cell line. The IC₅₀ in A2780 cells is 25 times lower than the respective value for normal human primary fibroblasts demonstrating 1 has higher cytotoxicity towards cancer cells. Additionally, combination of DOX with 1 induces a higher loss of HCT116 cell viability compared with each drug alone.     

Preparation,structural and thermal characterization of cobalt(II) and copper(II) complexes with 3-hydroxypicolinamide

Cobalt(II) and copper(II) complexes of 3-hydroxypicolinamide (3-OHpia), namely [Co(3-OHpia)₂(H₂O)₂](NO₃)₂ (1), [Co(3-Opia)₂(H₂O)₂] (2) and [Cu(3-OHpia)₂(NO₃)₂] (3), were prepared and characterized by IR spectroscopy and TG/DTA methods. The molecular and crystal structures of 1 and 3 were determined by X-ray crystal structure analysis. Complexes 1 and 3 were obtained by reaction of 3-hydroxypicolinamide with cobalt(II) nitrate or copper(II) nitrate, respectively, in a mixture of ethanol and water. Complex 2 was prepared by reaction of cobalt(II) acetate and 3-OHpia in aqueous solution. X-ray structural analysis revealed octahedral coordination polyhedra in both 1 and 3 and the same N,O-chelated coordination mode of 3-OHpia. The coordination sphere of the cobalt(II) center in 1 is completed by two coordinated water ligands and that of the copper(II) center in 3 by two coordinated nitrate anions. There are also two uncoordinated nitrate ions in 1 which compensate the positive charge of cobalt(II). The crystal structures of 1 and 3 are dominated by intermolecular O–H···O and N–H···O hydrogen bonds. The thermogravimetric study indicated the loss of two coordinated water molecules in 1 and 2 and of one 3-OHpia ligand together with N₂ molecule in 3 at lower temperatures (up to 300 °C).     

Novel lanthanide complexes of 5-nitroisophthalic acid containing two kinds of π–π stacking interactions

The novel two-dimensional coordination polymers [Ln(5-nip)(5-Hnip)(H₂O)₂](H₂O)₂ (Ln?=?Sm (1), Gd (2), Dy (3); 5-nipH₂?=?5-nitroisophthalic acid) were prepared using hydrothermal methods. Their isomrphous structures were characterized by single-crystal X-ray diffraction analyses. Two-dimensional layer-like structures are constructed by lanthanide ions bridged by 5-nip^2? ligands with the layers packing in 3D motifs through two kinds of π–π stacking interactions and hydrogen bonds. The complexes are thermally stable, aside from loss of water, to ca 350°C.     

Thermal studies on nickel(II) 4-iodopyrazole complexes

This work describes the synthesis, IR and UV-Vis spectroscopic characterization as well the thermal behavior of the [NiCl₂(HIPz)₄]⋅C₃H₆O (1), [Ni(H₂O)₂(HIPz)₄](NO₃)₂ (2), [Ni(NCS)₂(HIPz)₄] (3) and [Ni(N₃)₂(HIPz)₄] (4) (HIPz=4-iodopyrazole) pyrazolyl complexes. TG experiments reveal that the compounds 1–4 undergo thermal decomposition in three or four mass loss steps yielding NiO as final residue, which was identified by X-ray powder diffraction.     

High-energy electron transfer dissociation (HE-ETD) using alkali metal targets for sequence analysis of post-translational peptides

Post-translational modifications (PTMs) of proteins are important in the activation, localization, and regulation of protein function in vivo. The usefulness of electron capture dissociation (ECD) and electron-transfer dissociation (ETD) in tandem mass spectrometry (MS/MS) using low-energy (LE) trap type mass spectrometer is associated with no loss of a labile PTM group regarding peptide and protein sequencing. The experimental results of high-energy (HE) collision induced dissociation (CID) using the Xe and Cs targets and LE-ETD were compared for doubly-phosphorylated peptides TGFLT(p)EY(p)VATR (1). Although HE-CID using the Xe target did not provide information on the amino acid sequence, HE-CID using the Cs target provided all the z-type ions without loss of the phosphate groups as a result of HE-ETD process, while LE-ETD using fluoranthene anion gave only z-type ions from z₅ to z₁₁. The difference in the results of HE-CID between the Xe and Cs targets demonstrated that HE-ETD process with the Cs target took place much more dominantly than collisional activation. The difference between HE-ETD using Cs targets and LE-ETD using the anion demonstrated that mass discrimination was much weaker in the high-energy process. HE-ETD was also applied to three other phosphopeptides YGGMHRQEX(p)VDC (2: X = S, 3: X = T, 4: X = Y). The HE-CID spectra of the doubly-protonated phosphopeptides (= [M + 2H]²⁺) of 2, 3, and 4 using the Cs target showed a very similar feature that the c-type ions from c₇ to c₁₁ and the z-type ions from z₇ to z₁₁ were formed via N-Cα bond cleavage without a loss of the phosphate group.     

A new organic–inorganic hybrid polyoxoniobate based on Lindqvist-type anion and nickel complex

A new organic–inorganic hybrid polyoxoniobate (H₂en)₂[Ni(en)₃][H₂Nb₆O₁₉] · 5.5H₂O (1) (en = ethylenediamine) has been synthesized by the diffusion method and structurally characterized by elemental analyses, infrared spectrum, ultraviolet (UV) spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction, thermogravimetric (TG) analysis, and single-crystal X-ray diffraction. Crystal structure analysis reveals that 1 exhibits a 3-D supramolecular architecture constructed from Lindqvist-type [H₂Nb₆O₁₉]^6? polyoxoanions and [Ni(en)₃]²⁺ via hydrogen-bonding interactions. The XPS measurement indicates that the oxidation state of Ni is +2. TG curve of 1 exhibits two steps of weight loss. In situ UV spectra display that 1 can exist in large pH range in aqueous solution.     

A Facile Route for the One‐Step Synthesis of New Fully Aromatic Poly(urea‐imide)s

The direct preparation of various aromatic poly(urea‐imide)s (5a₁ –5b₄ ) from N‐[3,5‐bis(trimellitimido)phenyl]phthalimide (1) using diphenylphosphoryl azide (DPPA) was investigated. The polymers were obtained by the conversion of imide ring‐containing diacid 1 to corresponding di(carbonyl azide) 2 with DPPA and then to diisocyanate 3 through the Curtius rearrangement of compound 2. This was followed by polyaddition of 3 with two aromatic diamines (4a and 4b). In order to compensate the diisocyanate shortage against the diamines, some excess amounts of the initial triimide‐dicarboxylic acid 1 were used. The molecular weights of the resulting poly(urea‐imide)s were evaluated viscometrically. The poly(urea‐imide)s exhibited an excellent solubility in a variety of polar solvents. The crystallinity nature of the polymers was estimated by means of WXRD. The glass transition temperatures and the 10% wt loss temperatures of the polymers 5a₃ and 5b₃ were determined by DSC and TGA/DTG methods in nitrogen atmosphere, respectively. The transparent films of the resulting polymers were also prepared by casting the solution.     

Syntheses,crystal structures,and thermal stabilities of the first Hofmann-DMF-type complexes Zn(DMF)2M(CN)4 (M = Ni,Pd, Pt)

The first Hofmann-DMF-type complexes Zn(DMF)₂M(CN)₄ (M = Ni (1), Pd (2), Pt (3)) have been synthesized by solution diffusion and characterized structurally by single-crystal X-ray diffraction. The structure consists of 2-D corrugated sheets stacking along the a-axis in an ABAB packing mode without interpenetration. The octahedral Zn ions and square-planar M ions occupy special positions of 2/m site symmetry. The DMF, except for six methyl H atoms, lies on a crystallographic mirror plane; the DMF molecules coordinate to axial sites of Zn on both sides of the sheet. The framework of 1 begins to collapse with loss of coordinated DMF.     

Novel Process for Synthesis of 1,2,4‐Triazoles: Ytterbium Triflate–Catalyzed Cyclization of Hydrazonyl Chlorides with Nitriles

Abstract

A series of 1,3,5‐trisubstituted 1,2,4‐triazoles were synthesized via the intermolecular cyclization of hydrazonyl chlorides with nitriles catalyzed by ytterbium triflate [Yb(OTf)₃]. The amount of catalysis was discussed and Yb(OTf)₃ could be reused without loss of activity.     

Hydrothermal syntheses and structural characterization of two organic–inorganic hybrid compounds based on Lindqvist polyanions

Two organic–inorganic hybrid polyoxometalates {[V₂W₄O₁₉{Cu(2,2′-bipy)₂}₂] · (4,4′-bipy)} _n (1) and [Co(2,2′-bipy)₃][W₆O₁₉] · H₂O (2) (2,2′-bipy = 2,2′-bipyridine, 4,4′-bipy = 4,4′-bipyridine), constructed by Lindqvist polyanions and transition metal coordination cations, have been synthesized under hydrothermal conditions and characterized by elemental analysis, IR, UV spectra, thermogravimetric (TG) analyses, X-ray photoelectron spectroscopy (XPS), and single- crystal X-ray diffraction. Compound 1 is a neutral molecule and consists of a di-V^V substituted Lindqvist-type polyanion [V₂W₄O₁₉]^4?, two supporting copper cations [Cu(2,2′-bipy)₂]²⁺ and one free 4,4′-bipy. Neutral molecules of 1 are extended to a 2-D grid-like network by π–π stacking interactions between pyridine groups. The molecular structure of 2 contains one [W₆O₁₉]^2? cluster polyanion and a [Co(2,2′-bipy)₃]²⁺. Inductively coupled plasma (ICP) analysis and XPS spectrum of 1 prove the presence of V^V. TG curves of 1 and 2 indicate two weight loss steps.     

Rapid and Sensitive Method to Detect Oxidized Forms of rhGCSF Using Agilent 2100 Bioanalyzer

Abstract

Oxidation of methionine of human granulocyte colony stimulating factor (GCSF) results in loss of biological activity. In this study, we report the use of an Agilent 2100 bioanalyzer to detect oxidized forms of rhGCSF after exposure to hydrogen peroxide (H₂O₂). Our data show that the bioanalyzer is capable of detecting minor changes in rhGCSF after oxidation with 0.01% (w/v) H₂O₂, which results in nearly 50% loss in biological activity as observed by cell (NFS-60) proliferation assay. Dithiothreitol could largely protect such a H₂O₂-mediated oxidation, and thus, we conclude that the major modification of GCSF upon methionine oxidation is the conversion of methionines to its sulfoxide.     

Syntheses,crystal structures and thermoanalyses of alkaline earth metal complexes derived from dinitropyridone

Six new alkaline-earth metal compounds derived from dinitropyridone ligands (3,5-dinitropyrid-2-one, 2HDNP; 3,5-dinitropyrid-4-one, 4HDNP and 3,5-dinitropyrid-4-one-N-hydroxide, 4HDNPO) were synthesized and characterized by elemental analysis, FT-IR and partly by powder XRD, TG-DSC and X-ray single-crystal diffraction analysis. The structural determination revealed that one molecule of both magnesium salts (Mg(2DNP)₂ ·?8H₂O, (1), and Mg(4DNP)₂ ·?6H₂O (4)) comprise one cation [Mg(H₂O)₆]²⁺ and two anions displaying centro-symmetry with the Mg atom located at the center. Two anions (and crystalline water molecules) are joined by hydrogen bonds. The barium salt Ba(4DNP)₂ ·?4H₂O (5), is a centro-symmetric dimer with each Ba(II) being coordinated by one monodentate ligand anion, two bidentate ligand anions (different coordination pattern) and five water molecules. Another barium salt, Ba(4DNPO)₂ ·?6H₂O (6), is a coordination polymer, the ten-coordinate (BaO₁₀) barium environment comprising four water molecules, a pair of 4DNPOs via the pyridine-N-oxide oxygen, and one 4DNPOs from an adjacent metal atom offering chelating nitro group oxygen, bridging adjacent bariums. Abundant intermolecular hydrogen bonds link the molecules of each complex into multi-dimensional chains. The X-ray powder diffraction analysis confirmed the phase homogeneity of the polycrystalline samples. The TG-DSC results revealed that Mg(2DNP)₂ ·?8H₂O and Ba(4DNP)₂ ·?6H₂O each has three main weight-loss stages. The first step is the loss of all water molecules and the last step is the loss of the nitro groups and/or decomposition of the pyridine rings with the release of heat.     

A study on synthesis and thermal,spectral and biological properties of carboxylato-Mg(II) and carboxylato-Cu(II) complexes with bioactive ligands

Summary Synthesis, elemental (CHN), spectral (FTIR), thermogravimetry (TG), differential thermal analysis (DTA) and complexometric titration have been applied to the investigation of the thermal behavior and structure of the complexes: Mg(ac)₂(mpc)₃·3H₂O(I), Mg(Clac)₂(mpc)₂·3H₂O(II), Mg(Cl₂ac)₂(mpc)₂·3H₂O(III), Mg(Cl₃ac)₂(mpc)₂·3H₂O(IV) and [Cu(ac)₂(mpc)]₂·3H₂O(V) (ac=CH₃COO^-, Clac=ClCH₂COO^-, Cl₂ac=Cl₂CHCOO^-, Cl₃ac=Cl₃CCOO^- and mpc=methyl-3-pyridyl carbamate). Thermal decomposition of these complexes is a multi-stage processes. The composition of the complexes and the solid state intermediate and resultant products of thermolysis had been identified by means of elemental analysis and complexometric titration. The possible scheme of decomposition of the complexes is suggested. Heating the complexes first resulted in a release of water molecules. The TG results show that the loss of the volatile ligand (mpc) occurs in one step for complexes II, IV and V, and in two steps for complexes I and III. The final solid product of thermal decomposition was MgO or CuO. The thermal stability of the complexes can be ordered in the sequence: I=II<IV<III<V. Mpc was coordinated to Mg(II) or Cu(II) through the nitrogen atom of its heterocyclic ring. IR data suggest to a unidentate coordination of carboxylates to magnesium or copper n complexes I-V. The preliminary studies have shown that the complexes do have antimicrobial activities against bacteria, yeasts and/or fungi. The highest antimicrobial activities were manifested by the complex V.     

Fe3O4@dopa (dopa = dopamine hydrochloride) functionalized Mn(III) Schiff base complex: A promising magnetically separable heterogeneous catalyst for oxidative transformations

A chiral Schiff base complex has been prepared by treating (R)-1,2-diaminopropane with 3,5-dichlorosalicylaldehyde in ethanol, followed by addition of manganese chloride hexahydrate to generate a homogeneous catalyst, [MnL(Cl)(H₂O)] (HMN). Crystal structure of the complex reveals its mononuclear nature. Circular dichroism (CD) studies indicate that the ligand and its corresponding complex contain an asymmetric center. The catalytic activity of HMN toward epoxidation of alkenes, oxidation of alcohols and oxidation of alkanes has been investigated in the presence of iodosylbenzenediacetate (PhI(OAc)₂), in acetonitrile. In the present work we found yields to be much higher compared to our previous approaches. For further adaptation, we attached our efficient homogeneous catalyst with surface modified magnetic nanoparticles (Fe₃O₄@dopa) and thereby obtained a new magnetically separable nanocatalyst Fe₃O₄@dopa@MnLCl (FDM). This catalyst has been characterized and its oxidation ability assessed in similar conditions as those used for the homogeneous catalyst. Enantiomeric excess in epoxide yield reveals retention of chirality of the active site of Fe₃O₄@dopa@MnLCl. The catalyst can be recovered by magnetic separation and recycled several times without significant loss of catalytic activity.     

Thermoanalytical study of precursors for In<Subscript>2</Subscript>S<Subscript>3</Subscript> thin films deposited by spray pyrolysis

Thermal decomposition of precursors for In₂S₃ thin films obtained by drying aqueous solutions of InCl₃ and SC(NH₂)₂ at the In:S molar ratios of 1:3 (1) and 1:6 (2) was monitored by simultaneous TG/DTA/EGA-FTIR measurements in the dynamic 80%Ar + 20%O₂ atmosphere. XRD and FTIR were used to identify the dried precursors and products of the thermal decomposition. The precursors 1 and 2 are complex compounds, while in 2 free SC(NH₂)₂ is also present. The thermal degradation of 1 and 2 in the temperature range of 30–900 °C consists of four mass loss steps, the total mass loss being 89.1 and 78.5%, respectively. According to XRD, In₂S₃ is formed below 300 °C, crystalline In_2.24(NCN)₃ is detected only in 1 above 520 °C and In₂O₃ is the final decomposition product at 900 °C. The gaseous species evolved include CS₂, NH₃, H₂NCN, HNCS, which upon oxidation yield also COS, SO₂, HCN and CO₂.