Stereoselectivity of a polymer supported reaction

the substitution of Cl by PhCH₂ - CO₂ - and CH₂ = CH - CO₂ - in a soluble chloromethylated polystyrene leads to polymer supported esters which were used for the preparation of cyclopropyl derivatives. For the first time at our knowledge, a reaction was performed between two funntionalized polymers. The polymer backbone effect on the reaction with one or two bound reagents is not large, and it depends on the temperature.     

Small ring compounds—XXX : Homolytical aromatic substitution and hydrogen abstraction reaction with cyclopropyl radical

Homolytic aromatic substitution and hydrogen abstraction reactions with cyclopropyl radical were carried out to determine the reactivity and ionic character of cyclopropyl radical by examination of the orientation effect, partial rate factor and influence of substituents. By thermal decomposition of biscyclopropaneformyl peroxide in a series of substituted benzenes, the corresponding cyclopropylated benzene derivatives (the mixture of ortho, meta and para isomers) were obtained in moderate yield. In view of the orientation effect and the partial rate factor, the cyclopropyl radical seems to be fairly free from polar effect, and to resemble the phenyl radical more than the common alkyl radical although the cyclopropyl radical has a slightly higher reactivity than the phenyl radical. The relative reactivity of the 2-phenylcyclopropyl radical in the hydrogen abstraction reaction toward the benzylic position of ring-substituted toluenes gave good Hammett's correlation with the slope of + 0·20 suggesting little ionic character in the transition state. This result was in good agreement with the conclusion obtained from homolytic aromatic substitution reaction and with the chemical reactivity to be expected from the non-planar nearly sp²-hybridized conformation of the cyclopropyl radical.     

Divergent synthesis of fully substituted isoxazoles and spiro-fused pyrazolin-5-ones from cyclopropyl oximes

Efficient and divergent synthesis of fully substituted isoxazoles and spiro-fused pyrazolin-5-ones is developed from cyclopropyl oximes based on selection of reaction conditions. Under Appel conditions (PPh₃/CBr₄), substituted isoxazoles were synthesized from cyclopropyl oximes via a ring-opening and intramolecular cyclization process, whereas by treatment of cyclopropyl oximes with p-toluenesulfonyl chloride in the presence of potassium hydroxide, spiro-fused pyrazolin-5-ones were obtained via tandem ketoxime tosylation and intramolecular cyclization.     

Activating effects of unsaturated and cyclopropyl groups in gas phase pyrolysis of acetates. Paper XVIII

The activating effects of a number of unsaturated groups and a cyclopropyl group have been evaluated in a solvent free system by determining the absolute rate constants, and energies and entropies of activation in the vapor phase pyrolysis of secondary and tertiary esters of the type RC(R′CH₃) OAc where R′ = H or CH₃ and R = c-Pr, i-Pr, CH₃, CH₂?CH, CH₂?CHCH₂, C₆H₅; the cyclopropyl showed only a moderate activating effect. The results are in contrast to the very significant activating effect of a cyclopropyl group in solvolysis of cyclopropylcarbinyl derivatives. Apparently marked activation by this group occurs only when a highly developed positive center forms adjacent to it. The lack of marked activation by the cyclopropyl group supports a mechanism for ester pyrolysis which involves a modest, but detectable, charge separation in the transition state [2] but questions a mechanism in which an intimate ion-pair was proposed [3].     

Resonance Raman observation of the allyl cation produced after ultraviolet photodissociation of cyclopropyl bromide in acetonitrile solution

We have obtained transient resonance Raman spectra of the [CH₂CHCH₂]⁺ (allyl cation) produced following C-band excitation of cyclopropyl bromide. The experimental resonance Raman spectrum display an overtone progression in the nominal [CCC]⁺ stretch mode and its combination bands with the CH/CH₂ rocking modes. Density functional theory computations were performed to estimate the vibrational frequencies for the allyl cation, the allyl radical, the cyclopropyl radical, the cyclopropyl bromide molecule and the gauche-allyl bromide molecule and compared to the experimental vibrational frequencies. This comparison indicates that the allyl cation can be formed as a product of cyclopropyl bromide photodissociation in acetonitrile solution.     

α-FUNCTIONAL CYCLOALKYLPHOSPHONATES I. SYNTHESIS

Abstract

Cycloalkylphosphonates 2 of different sizes (from cyclopropyl to cycloheptyl) bearing various functional groups Z in a position were synthesized by bis-alkylation of α-functional methylphosphonates 1 and Ω-dibromoalkanes in presence of base. The choice of the basic system is determined by the nature of Z. With powerful electron-withdrawing groups, NaH-THF/DMSO (Method A, for Z=CN, SO₂R) or liquid-solid phase transfer process [Method B, for Z=COOR, P(O) (OEt)₂] proved to be the more suitable systems. For Z=aryl or SR, lithium diisopropylamide is required to achieve the deprotonation. A wide range of new phosphonates were obtained in high yields on preparative scale.     

Structural and catalytic aspects of copper(II) complexes containing 2,6-bis(imino)pyridyl ligands

The synthesis, structure, and ligand substitution mechanism of a new five-coordinate trigonal-bipyramidal copper(II) complex, [Cu^II(py ^tBuMe₂N₃)Cl₂] (1), with a sterically constrained py ^tBuMe₂N₃ chelate ligand, py ^tBuMe₂N₃?=?2,6-bis-(ketimino)pyridyl, are reported. The kinetics and mechanism of chloride substitution by thiourea, as a function of nucleophile concentration, temperature, and pressure, were studied in detail and compared with an earlier study reported for the analogous complex [Cu^II(py ^tBuN₃)Cl₂] (2) [py ^tBuN₃?=?2,6-bis-(aldimino)pyridyl]. Catalysis of the oxidation of 3,5-di-tert-butylcatechol to 3,5-di-tert-butylquinone by 1 and 2 was studied. Correlations between the reactivity, chloride substitution behavior, and reduction potentials of both complexes were made. These show that the rate of oxidation is independent of the rate of chloride substitution, indicating that the substitution of chloride by catechol as substrate occurs in a fast step. Spectral data show a non-linear relationship between the ability of the complexes to oxidize 3,5-DTBC and the Lewis acidity of their copper(II) centers. Electrochemical data demonstrate that the most effective complex 1 has a E ⁰ value that approaches the E ⁰ value of the natural tyrosinase enzyme.     

Protonation of some cyclopropylarenes in the gas phase

The capability of the cyclopropyl group to conjugate with Unsaturated systems or to delocalize an adjacent positive charge is compared with that of a double bond, and is tested by the determination of the gas-phase basicity (GB) of various methyl-substituted cyclopropylbenzenes, α-methyl styrenes, and biphenyls by Fourier-transform ion cyclotron resonance. The site of the gas-phase protonation in the cyclopropylbenzene is established at the three-membered ring, based on analogy with the trends of GBs in the styrene system upon methyl substitution at the aromatic meta and para positions. The diverse nature of the conjugative interaction of a cyclopropyl group and of a double bond toward an aromatic ring is manifested, instead, in the different behaviour toward a steric perturbation. The cyclopropyl group adopts the bisected conformation in cyclopropylbenzene, because it tolerates the steric perturbation of a methyl group, intentionally placed in the ortho position, more easily than the double bond, which adopts a coplanar conformation in the isomeric α-methyl styrene.     

Selected Reaction of (Z)-Dimethyl α-(Bromomethyl) Fumarate with Secondary Amines

Regioselective reaction of (Z)-dimethyl α-(bromomethyl) fumarate 2 with bulky secondary amines in ether as solvent at room temperature, leads exclusively to the rearranged substitution α-(functional alkyl amino) acrylic esters 4a-i in high yields. The less and more bulky amine gives rise respectively to the two successive (S_N2′) and (S_N2) substitution derivatives 5j,k and 51.     

REACTION OF (2-BENZOTHIAZOLYL)-SULFENAMIDES WITH P-CONTAINING REAGENTS

Abstract

The title reaction was investigated to find that only substitution reaction on amino group occurred when (2-benzothiazolyl)sulfenamides 1 reacted with P(NR₂,)₃, whereas the treatment of 1 with (RO)P(NR₂,)₂, gave derivatives of phosphorodiarnidothioic acid together with 2-alkylthiobenzothiazole and its isomer in addition to substitution products, and no substitution products obtained when N-substituted analogues of 1 were treated similarly.     

Reactions of Ruthenium–Allenylidene Complexes Tethering a Cyclopropyl Group

Two cyclopropyl allenylidene complexes [Ru]=CCC(R)(C₃H₅) ([Ru]=[RuCp(PPh₃)₂], Cp=Cyclopentadienyl; R=thiophene ( 2a ) and R=Ph ( 2b )) are prepared from the reactions of [Ru]Cl with the corresponding 1‐cyclopropyl‐2‐propyn‐1‐ol in the presence of KPF₆. Thermal treatment, halide‐anion addition, and palladium‐catalyzed reactions of 2a and 2b all lead to a ring expansion of the cyclopropyl group, giving the vinylidene complexes 4a and 4b , respectively, each with a five‐membered ring. This ring expansion proceeds by C C bond formation between Cβ of the cumulative double bond and a methylene group of the cyclopropyl ring. In the reaction of 2a with pyrrole, consecutive formation of two C C bonds, one between C‐2 of pyrrole and Cγ of 2a and the other between C‐3 of pyrrole and Cα, results in the formation of 6a . The reaction proceeds by addition of pyrrole and 1,3‐proton shifts. The hydrogenation of 2a by NaBH₄ is carried out in different solvents. The cumulative double bonds are reduced regioselectively to give a mixture of 7a and 8a . Interestingly, use of different solvents leads to different ratios of 7a and 8a . Presence of a protic solvent like methanol in dichloromethane or chloroform solution increases the yield of 8a , thus revealing that both the rates of hydroboration and deboronation increase. The structures of two new complexes 4a and 6a have been firmly established by X‐ray diffraction analysis.     

Structural Identification of Substituted C-1 Spiro Cyclopropyl Sugars.

ABSTRACT

Photolysis of peracetylated D-glucopyranosylidene diazide in the presence of acrylonitrile in excess leads to new isomeric spiro C-1 cyclopropanic sugars (65% combined yield). Such structures, thus readily accessible by a new route which probably involves the addition of carbenic intermediates to an electrophilic alkene, have been identified by NMR investigations. In particular, the ¹H NMR spectra show that the location and the orientation of the cyano substituent on the cyclopropyl ring can be easily established by way of the deshielding effect (0.2 - 0.3 ppm) which is induced on a sugar ring proton attached at C-2, C-3 or C-5. In order to unambiguously identify the obtained spirosugars, the crystal structure of one of them was determined by X-ray analysis. C₁₇H₂₁NO₉, orthorhombic P2₁2₁2₁, a=9.093(1), b=9.933(1), c=21.588(3) Å, Z=4, R=0.041 for 1645 unique observed reflexions.     

Density function studies on the PtCl2‐catalyzed asymmetric cycloisomerization reaction of hydroxylated enynes

The PtCl₂‐catalyzed asymmetric cycloisomerization reaction of hydroxylated enynes was studied using density functional theory (DFT). All structures have been optimized completely at the B3LYP/6‐311G(d,p) level. As shown, the cycloisomerization reaction is exothermic. The cycloisomerization reaction mainly undergoes the formation of catalyst‐hydroxylated enzyme coordination, the asymmetric cyclopropyl platinum carbene, catalyst–cyclopropyl enol coordination, and catalyst–cyclopropyl ketone coordination. The chirality‐limiting step for the asymmetric cycloisomerization reaction is the formation of the asymmetric cyclopropyl platinum carbene, and the rate‐determining step for this reaction is the formation of the catalyst–cyclopropyl ketone coordination. The dominant products predicted theoretically are (R,S) ‐syn_5a, in agreement with the experiment. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

The vibrational spectra and normal coordinate analysis of tetracyclopropyllead

All the fundamental frequencies observed in IR and Raman spectra have been assigned to the normal modes of the molecule (C₃H₅)₄Pb (C₃H₅ = cyclopropyl). The calculated force field is compared to that of (C₃H₅)₂Hg and the Cmetal stretching force constants are discussed along with those of Me₄Pb and Me₂Hg; The similarity of the spectra of cyclopropyllead and cyclopropyl-mercury proves that the vibrations of cyclopropyl structural units are isolated in both molecules.     

THE DISPLACEMENT OF BROMIDE ION BY DIMETHYL PHOSPHITE FROM THE OXOPENTABROMOMOLYBDATE(V) COMPLEX

Abstract

A study of the chemical behaviour of dimethyl phosphite, (CH₃O)₂PO(H), with ammonium oxopentabromo-molybdate(V), (NH₄)₂MoOBr₅, in the tetrahydrofuran was carried out. The stepwise substitution of the bromo ligand by dimethyl phosphite was observed by analysis of esr spectral changes. The relative concentration of each species in solutions of this reaction mixture was obtained as a function of time with the assistance of computer stimulated esr spectra by using a curvefitting program. Rate constants and activation parameters of each individual substitution step were obtained.     

Ritter Reaction with Cyclopropyl Ketones and Cyclopropyl Alcohols: Synthesis of N-Actyl- γ-Keto and N-Acyl Hohoallyl Amines

A variety of conjugated cyclopropyl ketones and cyclopropylcarbinyl alcohols were reacted with two nitriles viz. CH₃ CN and CH₂[dbnd]CH-CN in presence of cone. H₂ SO₄. It was found that with appropriate substitutions cyclopropyl ketones gave N-Acyl-γ-keto amines whereas cyclopropylcarbinyl alcohols gave the corresponding N-Acyl homoallylic amines in reasonably good yields. The olefins obtained had E-stereo-chemistry. With bicyclic cyclopropylcarbinyl alcohols the ring expanded products were formed. A plausible rationale is provided to account for these observations     

Photoreactivity of 3-thujopsanone

The photoreactivity in the liquid phase of the polysubstituted cyclohexanones 3-thujopsanones results from a primary process of Norrish I type, but is modified by the opening of the cyclopropyl ring. Quantum yields are higher than for less substituted cycloalkanones. In aprotic solvents, only hydrocarbons are formed either with the loss of a C₂H₂O group leading to the main photoproduct 4 or with decarbonylation of the ketone leading to a new cyclopropyl chain. In alcohol solvent, two isomeric compounds with an oxygenated heterocycle are obtained from the addition of solvent to a carbene intermediate.     

A highly diastereoselective synthesis of (E)-B-2-(1-cyclopropyl-1-alkenyl)-1,3,2-dioxaborinanes. Isolation and oxidation to alkyl cyclopropyl ketones

A convenient, novel synthesis of alkyl cyclopropyl ketones based on Z-1-bromo-1-alkenylboronate esters is developed. α-Bromo-(Z)-1-alkenylboronate esters readily available from literature procedures smoothly undergo a reaction with cyclopropylmagnesium bromide in tetrahydrofuran to provide the corresponding ‘ate’ complexes. These ‘ate’ complexes undergo intramolecular nucleophilic substitution reactions to provide the corresponding (E)-1-alkenylboronate esters containing cylcopropyl moiety for the first time in good isolated yields (68-82%). The carbon skeleton present in these intermediates is confirmed by oxidation with hydrogen peroxide and sodium acetate to afford the corresponding alkyl cyclopropyl ketones in good yields (72-85%).     

Synthesis,characterization, and electrochemical properties of new water-soluble Mn12O12(O2CR)16(H2O)4 clusters

Abstract

We report our attempts to produce water-soluble Mn clusters of the type [Mn₁₂O₁₂(O₂CR)₁₆(H₂O)₄] and the synthesis, spectroscopic, structural, and electrochemical characterization of the three new compounds that were obtained. Clusters 2, 3, and 4 were prepared via substitution of the acetate ligands in [Mn₁₂O₁₂(O₂CMe)₁₆(H₂O)₄] (1) with either 3,4-diaminobenzoic acid, L-proline or L-ascorbic acid, respectively, which are all inexpensive and readily available. Clusters 2, 3, and 4 were characterized by elemental analysis, UV-Vis, and FTIR spectroscopies, XPS, MS, and XRD analysis, suggesting that the clusters retain their structure during the substitution reaction, albeit 4 was obtained partially substituted and reduced. Electrochemical measurements in acetate buffer at pH 6, including continuous cyclic voltammetry scans of the free ligands and of the clusters, imply that 4 is stable to the oxidation process, while in 2 the primary amine ligands are oxidized rapidly, leading to precipitation of the cluster. Overall, the voltammetric measurements support the spectroscopic-based proposed structures.     

Enantioselective synthesis of chiral carbocyclic pyrimidine nucleosides via asymmetric cyclopropanation

An efficient method to construct chiral cyclopropyl pyrimidine carbocyclic nucleoside analogues bearing a quaternary center was developed via asymmetric Michael-initiated cyclopropanation. The axis chirality was observed in cyclopropyl pyrimidine carbocyclic nucleoside analogues for the first time, which was caused by the rotationally restricted NC bond in N-COPh moiety. Using (DHQD)₂AQN as the organocatalyst, diverse cyclopropyl pyrimidine carbocyclic nucleoside analogues were generated in 76–93% yields and 73–96% ee.