电位溶出分析法同时测定罐头食品中痕量铅锡

利用不除氧电位溶出分析法成功地测定了溶出电位相近的铅、锡两元素。以0.05mol·L-1草酸为介质,调节溶液pH1.0,以溶解氧作氧化剂,静止溶出,两元素均有分离清晰的平台出现。铅、锡的线性范围分别为2.0×10-9～2.0×10-7mol·L-1和2.0×10-8～2.0×10-6mol·L-1。当富集时间为4min时,铅、锡的检出限分别为5.0×10-10mol·L-1和5.0×10-9mol·L-1。此法已成功地应用于测定罐头食品中痕量铅和锡。     

β-环糊精用于盐酸金刚烷胺的示波极谱测定

在0.2mol·L-1NaOH底液中,β-环糊精能够产生灵敏切口,其深度随盐酸金刚烷胺-β-环糊精包结物量的增加而变浅。根据β-环糊精的示波特性,建立了用二次微分简易示波伏安法间接测定片剂中盐酸金刚烷胺含量的新方法。盐酸金刚烷胺的浓度在1.0×10-6-3.6×10-5mol·L-1范围内呈线性,回归方程h(V)=97.66+7.27×105c(mol·L-1),相关系数为0.995 6,检出限为4.0×10-7mol·L-1。对于2.5×10-5mol·L-1盐酸金刚烷胺钠5次测定的RSD为3.1％。与其他方法相比,此法具有仪器简单、快速、无需通氮除氧等特点。     

多壁碳纳米管修饰玻碳电极测定多巴酚丁胺的研究

研究了多巴酚丁胺在多壁碳纳米管修饰电极上的电化学行为,建立了一种直接测定多巴酚丁胺的电化学方法。在0.3mol·L-1H2SO4底液中,氧化峰电位为0.57V(vs.Ag/AgCl),峰电流与多巴酚丁胺的浓度在5.0×10-8～1.0×10-5mol·L-1范围内呈良好的线性关系。该法的检出限为3.0×10-8mol·L-1。平均回收率为99.15%。1.0×10-5mol·L-1多巴酚丁胺平行测定8次的标准偏差为4.8%。用拟定的方法测定了多巴酚丁胺注射液中多巴酚丁胺的含量,结果满意。     

线性扫描极谱法测定微量肉桂酸

在 1mol·L-1HOAc NaOAc介质中 (pH =3.6 ) ,肉桂酸有一还原峰 ,其峰电位为 - 1.4 7V(vs.SCE)。峰电流与肉桂酸浓度在 2 .0× 10 -5～ 8.0× 10 -4 mol·L-1之间呈线性关系 (r =0 .9989) ,检出限为 1.0× 10 -5mol·L-1。该法应用于肉桂酸含量的测定 ,结果满意 ,并对肉桂酸的电化学性质进行了研究     

催化氢波-单扫描示波极谱法测定克拉霉素

建立一种灵敏快速测定克拉霉素的新方法。在 0. 24 mol·L-1 KH2PO4 Na2HPO4(pH 6.81)支持电解质中,克拉霉素于-1.57 V(vs.SCE)处产生一催化氢波,其二阶导数峰峰电流与克拉霉素浓度在2.0×10-6~ 1.6×10-4mol·L-1范围内呈线性关系(r=0.999 4,n=8),检出限为1.0×10-6 mol·L-1。10 次测定 1. 0×10-5 mol·L-1 克拉霉素峰电流相对标准偏差为1 8%,回收率在98.3%~100.6%之间。该方法可用于药剂中克拉霉素的测定。     

TBABr TBAI水溶液体系的电致化学发光的研究

研究了四丁基溴化铵(TBABr)、四丁基碘化铵(TBAI)水溶液体系的电致化学发光。建立了电致化学发光法测定TBABr、TBAI的分析方法。线性范围分别为1.2×10~(-7)～5.0×10~(-5)mol·L~(-1),1.0×10~(-7)～1.5×10~(-5)mol·L~(-1)。检出限为1.0×10~(-7)mol·L~(-1),相对标准偏差均为5％。用该法测定人工合成样品获得较满意的结果。     

溶出伏安法对维生素K3的研究与测定

应用微分脉冲溶出伏安法(DPSV)对维生素K3在玻碳电极(GCE)上的电化学行为进行了研究.在氨水-NH4Cl(pH 9.0)底液中,对维生素K3进行循环伏安扫描,发现有一对良好的氧化还原峰出现,对电极反应机理进行了探讨.阴极溶出伏安峰电流与其浓度在2.0×10-6～1.0×10-4mol·L-1范围内呈线性关系(r=0.998 5),检出限为4.0×10-7mol·L-1.对于1.0×10-5mol·L-1的维生素K3,平行7次测定结果的RSD为1.15%.应用此方法对亚硫酸氢钠甲萘醌注射液进行了测定,方法的回收率为97.3%～102.5%.     

表面活性剂增敏2.5次微分极谱测定香豆素

拟定了表面活性剂增敏、2 .5次微分极谱测定香豆素的方法。在含 6.0× 10 -6 mol·L-13 氯 2 羟丙基 三甲基氯化铵的 0 .1mol·L-1KH2 PO4 Na2 HPO4 (pH 6.8)缓冲液中 ,香豆素还原波 [峰电位Ep=- 1.60V(vs .SCE) ]的 2 .5次微分极谱峰峰电流e″p 与其浓度在 4 .0× 10 -7～ 6.0× 10 -5mol·L-1范围内呈良好线性关系 (r =0 .9998,n =10 ) ,检出限为 1.2× 10 -7mol·L-1。 13次平行测量 8.0× 10 -6 mol·L-1香豆素的峰电流 ,RSD为 1.5 %。该方法可用于中药白芷中香豆素的直接测定     

钐—钛铁试剂—EDTA—CTMAB—TritonX—100荧光体系的研究及应用

系统地研究了钐一钛铁试剂—EDTA—CTMAB—Triton X-100体系的荧光特性及影响因素。应用此体系测定痕量钐的最佳条件为:钛铁试剂6.0×10~(-5)mol·L~(-1),EDTA 1.0×10~(-4)mol·L~(-1),CTMAB 5.0×10~(-4)mol·L~(-1),Triton X-100 0.05％,pH为13。在最佳条件下,钐浓度在1.0×10~(-7)～6.0×10~(-6)mol·L~(-1)范围内与体系的荧光强度呈线性关系,检出限为5.0×10~(-9)mol·L~(-1)。采用标准加入法对合成稀土样品中的痕量钐进行测定,结果满意。     

酞菁钯-PVC膜硫氰酸根离子选择性电极的研制及应用

研制了酞菁钯 PVC膜硫氰酸根离子选择性电极。在B.R缓冲体系(pH2.5)中,电极对SCN-离子响应的线性范围为1.0×10-5～0.1mol·L-1,检出限为7.28×10-6mol·L-1,斜率为56±1mV,电极具有良好的选择性和稳定性。用于印染厂废水中SCN-的测定,结果满意。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.