The ferroelectric and ferromagnetic characterization of CoFe2O4/Pb(Mg1/3Nb2/3)O3-PbTiO3 multilayered thin films

The multiferroic (PMN-PT/CFO)_n (n = 1,2) multilayered thin films have been prepared on SiO₂/Si(1 0 0) substrate with LNO as buffer layer via a rf magnetron sputtering method. The structure and surface morphology of multilayered thin films were determined by X-ray diffraction (XRD) and atom force microscopy (AFM), respectively. The smooth, dense and crack-free surface shows the excellent crystal quality with root-mean-square (RMS) roughness only 2.9 nm, and average grain size of CFO thin films on the surface is about 44 nm. The influence of the thin films thickness size, periodicity n and crystallite orientation on their properties including ferroelectric, ferromagnetic properties in the (PMN-PT/CFO)_n multilayered thin films were investigated. For multilayered thin films with n = 1 and n = 2, the remanent polarization Pr are 17.9 μC/cm² and 9.9 μC/cm²; the coercivity H_c are 1044 Oe and 660 Oe, respectively. In addition, the relative mechanism are also discussed.     

Comparison of the effect of PLT and PZT buffer layers on PZT thin films for ferroelectric materials applications

In order to study the effect of different buffer layers on the Pb(Zr_0.52Ti_0.48)O₃ (PZT) thin films, 10-nm thick (Pb_0.72La_0.28)Ti_0.93O₃ (PLT) and Pb(Zr_0.52Ti_0.48)O₃ buffer layers have been deposited on the Pt(1 1 1)/Ti/SiO₂/Si substrates by pulsed laser deposition, respectively. The top buffer layers were also deposited on PZT thin films with the same thickness of the seed layers in order to enhance the fatigue characteristics of PZT thin films. We compared the results of dielectric constant, hysteresis loops and fatigue resistance characteristics. It was found that the dielectric properties of PZT thin films with PLT buffer layers were improved by comparing with PZT thin films with PZT buffer layers. The polarization characteristics of PZT thin films with PLT buffer layers were observed to be superior to those of PZT thin films using PZT buffer layers. The remanent polarization of PZT thin films showed 36.3 μC/cm² and 2.6 μC/cm² each in the case of use PLT and PZT buffer layers. For the switching polarization endurance analysis, PZT thin films with PLT buffer layers showed more excellent result than that of PZT thin films with PZT buffer layers.     

Modification of ferroelectric hysteresis in Pb(Nb,Zr,Ti)O3 thin films induced by CO2 adsorption

We report on the modification of ferroelectric hysteresis in Pb(Nb,Zr,Ti)O₃ thin films under the adsorption of CO₂ gas. The samples were exposed to the gas in ultra high vacuum while different voltages between the top (Ag) and bottom (Pt) electrodes were applied. After dosing, the samples were heated from room temperature at 1.8 K/s, and a mass spectrometer was used to detect the desorbed molecules. The effective molecular sticking was demonstrated by the appearance of the carbon Auger peak in the surface of the sample and by the presence of CO₂ in the desorption curves. After +(−) 9.9 V were applied to the bottom electrode during dosing, we found a shift of −0.52 (+0.58) μC/cm² in the remnant polarization. These evidences suggest the existence of a depolarizing field induced by molecular adsorption at the surface of the top electrode, and contribute to highlight the potential use of ferroelectric thin films as gas sensors.     

Magnetoelectric properties of Mn-substituted BiFeO3 thin films with a TiO2 barrier

Multiferroic thin films with the general formula TiO₂/BiFe_1−xMn_xO₃ (x=0.00, 0.05, 0.10 and 0.15) (TiO₂/BFMO) were synthesized on Au/Ti/SiO₂/Si substrates using a chemical solution deposition (CSD) method assisted with magnetron sputtering. X-ray diffraction analysis shows the thin films contained perovskite structures with random orientations. Compared with BFMO films, the leakage current density of the TiO₂/BFMO thin films was found to be lower by nearly two orders of magnitude, and the remnant polarizations were increased by nearly ten times. The enhanced ferroelectric properties may be attributed to the lower leakage current caused by the introduction of the TiO₂ layer. The J-E characteristics indicated that the main conduction mechanism for the TiO₂/BFMO thin film was trap-free Ohmic conduction over a wide range of electric fields (0-500 kV/cm). In addition, ferromagnetism was observed in the Mn doped BFO thin films at room temperature. The origin of ferromagnetism is related to the competition between distortion of structure and decrease of grain size and decreasing net magnetic moment in films due to Mn doping.     

Enhanced dielectric and ferroelectric properties of Pb1−3x/2Lax(Zr0.5Ti0.5)O3 thin films with low lanthanum substitution

Effects of lanthanum (La) substitution (0.003 ≤ x ≤ 0.015) on the dielectric and ferroelectric properties of Pb(Zr_0.5Ti_0.5)O₃ thin films have been investigated. The films were synthesized on the Pt (1 1 1)/Ti/SiO₂/Si (1 0 0) substrates by a sol-gel method. Large dielectric constants of the films are obtained within range of 800-1600 which are almost comparable to those observed in bulk ceramics. The films also show improved remnant polarization values and reduced coercive field values with the increasing addition of La substitution. Our results suggest that low La substitution contributes to enhance film electric properties due to the improvement of non-180° domain wall mobility as well as the stabilization of tetragonal phase.     

Phase compositions and ferroelectric properties of Pb(Zr0.52,Ti0.48)O3 thin films with different highly orientations prepared by a sol-gel route

It is shown that different highly oriented Pb(Zr_0.52,Ti_0.48)O₃ films can be obtained on Pt/Ti/SiO₂/Si substrate using a sol-gel technique. The effects of pyrolysis temperature on the orientation, phase composition and ferroelectric properties of the films are investigated. It is found the ferroelectric hysteresis loops of (1 1 1)-oriented film, (1 1 1) and (1 0 0) mix-oriented film can both be saturated when the external electric field is large enough, whereas the hysteresis loop of (1 0 0)-oriented film is difficult to saturate. The analysis of X-ray diffraction indicated the possibility of different phase composition in different oriented films under large film residual stress. Higher remnant polarization (53 μC/cm²) for (1 0 0)-oriented film can be attributed to its more tetragonal phase composition, which results in that the in-plane domain switching can continuously occur with external electric field increasing.     

不同衬底上Pb(Zr0.52Ti0.48)O3择优取向铁电薄膜的制备和研究

通过MOD法在Si(100)和Pt(111)/Ti/SiO₂/Si基片上制备出LaNiO₃ ( LNO)薄膜.再通过修 正的Sol-gel法，在Pt(111)/Ti/SiO₂/Si,LNO/Si(100)和LNO/Pt/Ti/SiO_{2< /sub>/Si三种衬底上 制备出具有择优取向的Pb(Zr0.52Ti0.48)O3铁电薄膜. 经XRD分析表明，L NO薄膜具有(100)择优取向的类钙钛矿结构；PZT薄膜均具有钙钛矿结构，且在Pt(111)/Ti/S iO2/Si衬底上的薄膜以(110)择优取向，在LNO/Pt/Ti/SiO2/Si和LN O/Si(100)衬底上的 薄膜以(100)择优取向.经场发射SEM分析和介电、铁电性能测试表明，在LNO/Si和LNO/Pt/Ti /SiO2/Si衬底上的PZT薄膜的平均粒径、介电常数以及剩余极化强度均比以Pt/T i/SiO2/Si为衬底的薄膜大. 关键词： 3}薄膜')" href="#">LaNiO₃薄膜 PZT铁电薄膜 择优取向 剩余极化强度     

Periodicity and orientation dependence of electrical properties of [(Pb0.90La0.10)Ti0.975O3/PbTiO3]n (n = 1-6) multilayer thin films

The [(Pb_0.90La_0.10)Ti_0.975O₃/PbTiO₃]_n (PLT/PT)_n (n = 1-6) multilayer thin films were deposited on the PbO_x(1 0 0)/Pt/Ti/SiO₂/Si substrates by RF magnetron sputtering method. The layer thickness of PbTiO₃ in one periodicity kept unchanged, and the layer thickness of (Pb_0.90La_0.10)Ti_0.975O₃ is varied. The electrical properties of the (PLT/PT)_n multilayer thin films were investigated as a function of the periodicity (n) and the orientation. The studied results show that the PbO_x buffer layer results in the (PLT/PT)_n films’ (1 0 0) orientation, and the (1 0 0)-oriented (PLT/PT)_n multilayer thin films with n = 2 exhibit better pyroelectric properties and ferroelectric behavior than those of (PLT/PT)_n films with other periodicities and orientations. The underlying physical mechanism for the enhanced electrical properties of (PLT/PT)_n multilayer thin films was carefully discussed in terms of the periodicities and orientations.     

Nanoembossing and piezoelectricity of ferroelectric Pb(Zr0.3,Ti0.7)O3 nanowire arrays

Arrays of ferroelectric PZT nanowires with lateral size down to 200 nm were fabricated by nanoembossing technology. Structural characterization of the embossed PZT film was studied by Raman spectroscopy. Multidomain configurations of a single nanowire have been explored by vertical mode piezoresponse force microscopy (VPFM). The local electric polarization of the individual ferroelectric nanowire has also been investigated. Excellent ferroelectric and piezoelectric characteristics observed in the embossed PZT nanowires suggest nanoembossing technique proposed in this work is promising to become a useful method for ferroelectric nanowires fabrication.     

Effect of different annealing methods on ferroelectric properties of 0.95Pb(Sc0.5Ta0.5)O3-0.05PbTiO3 thin films

0.95Pb(Sc_0.5Ta_0.5)O₃-0.05PbTiO₃ thin films were prepared on LaNiO₃/SiO₂/Si substrate by radio frequency magnetron sputtering, and the films were annealed subsequently with repeated many times by two approaches: normal one-step rapid thermal annealing and innovative two-steps rapid thermal annealing. X-ray diffraction demonstrates that all the films were preferred (1 0 0) oriented and an appropriate repeat of annealing process can enhance perovskite phase of the films. Scanning electron microscopy suggests that the films treated by two-steps rapid thermal annealing show crack-free, uniform size grains and dense microstructure. Measurement of remnant polarization and leakage current dependence of electric field confirms that the films treated by two-steps rapid thermal annealing exhibit better ferroelectric properties than the films treated by one-steps rapid thermal annealing. The results reveal that microstructure plays an important role in enhanced ferroelectric properties of the 0.95Pb(Sc_0.5Ta_0.5)O₃-0.05PbTiO₃ thin films.     

Investigation on FR(LT)–FR(HT) phase transition and pyroelectric properties of pulsed laser deposited Pb(Zr0.93Ti0.07)O3 thin films

The preparation process, crystallinity and electrical properties of pulse laser deposited Pb(Zr_xTi_1−x)O₃ (PZT) thin films were investigated in this paper. PZT (x = 0.93) thin film samples deposited at different substrate temperatures were prepared. Si (1 1 0) was the substrate; Ag and YBCO were the top electrode and the bottom electrode respectively. The bottom electrode YBCO was deposited on the Si substrate by pulsed laser deposition (PLD), and then PZT was epitaxially deposited on YBCO also by PLD. After annealing, the top electrode Ag was prepared on PZT by thermal evaporation, and then the Ag/PZT/YBCO/Si structured thin films were obtained. The XRD and the analysis of their electrical characters showed that, when the substrate temperature was elevated from 600 °C to 800 °C, the crystallinity and electrical properties of PZT thin films became better and better, and the F_R(LT)–F_R(HT) phase transition of PZT (x = 0.93) thin films occurred at 62 °C. The PZT film deposited at 800 °C had the best pyroelectric properties, and when the F_R(LT)–F_R(HT) phase transition of this film occurred, the peak value of pyroelectric coefficient (p) was obtained, with a value of 1.96 × 10⁻⁶ C/(cm² K). The PZT film deposited at 800 °C had the highest remnant polarization (P_r) and the lowest coercive field (E_c), with the values of 34.3 μC/cm² and 41.7 kV/cm respectively.     

化学溶液法制备的Pb(Mg1/3Nb2/3)O3-PbTiO3薄膜的光学性能

用化学溶液方法在宝石衬底及有LaNiO₃缓冲层的Pt/TiO₂/SiO₂/Si衬底上制备了92%Pb(Mg_1/3Nb_2/3)O₃-8%PbTiO₃(PMNT)薄膜，X射线衍射测试结果表明：在有LaNiO₃缓冲层的Pt/TiO₂/SiO₂/Si衬底上制备的PMNT薄膜几乎是纯钙钛矿相，且薄膜 关键词： PMNT薄膜 光学性能 化学溶液法     

(111)择优取向的Pb(Zr0.52Ti0.48)O3铁电薄膜的制备及研究

选用不同浓度的Pb(Zr_0.52Ti_0.48)O₃溶胶，用Sol-gel法在Pt/Ti/SiO₂/Si基片上沉积一层厚度不同的Pb(Zr_0.52Ti_0.48)O₃ (PZT52)过渡层，经400℃烘烤、550℃退火等程序后，再用Sol-gel法在PZT52过渡层上沉积Pb(Zr_0.52Ti_0.48)O _{关键词： PZT铁电薄膜 择优取向 过渡层 剩余极化强度}     

Investigation the effects of the excess Pb content and annealing conditions on the microstructure and ferroelectric properties of PZT (52-48) films prepared by sol-gel method

The effects of the PbO volatilization, excess Pb content of PbZr_0.52Ti_0.48 (PZT) precursor, PbTiO₃ (PT) seeding layers and annealing condition on the microstructures, surface morphologies, preferred orientation and ferroelectric properties of PbZr_0.52Ti_0.48 films were systematically investigated. PZT films with a variety of excess Pb (0-20%) were spin-deposited on Si(1 0 0) and Pt(1 1 1)/Ti/SiO₂/Si(1 0 0) substrates by sol-gel technique. The films composition, Pb/Zr/Ti/O atom rate and Pb loss were semiquantitative analyzed by X-ray photoelectron spectrometer (XPS). When the excess Pb of PZT precursor was 10%, the Pb/Zr/Ti/O atomic rate of the fabricated films was very close to the designed rate of 1:0.52:0.48:3. The XRD and AFM investigations confirmed that PT seeding layer promoted the PZT films perovskite phase transformation and grains growth with (1 1 0) plane preferred orientation, accordingly lowered perovskite phase crystallization temperature and reduced Pb loss. The PZT films annealed in O₂ flow demonstrated better microstructure and ferroelectric properties comparing with films annealed in air by double remnant polarization increase and 8% coercive field increase. The underlying mechanism was also investigated.     

A comparative study of fibre-textured and epitaxial Nb-doped Pb(Zr0.53Ti0.47)O3 thin films on different substrates

Fibre-textured and epitaxial Nb-doped Pb(Zr_0.53Ti_0.47)O₃ (PNZT) thin films were grown on the different substrates by a sol-gel process. The [1 0 0]- and [1 1 1]-fibre-textured polycrystalline PNZT films were obtained on platinized silicon substrates by introducing PbO and TiO₂ seeding layers, while the [0 0 1]- and [1 1 1]-oriented epitaxial PNZT films were formed directly on Nb-doped SrTiO₃ (Nb:STO) single-crystal substrates with (1 0 0) and (1 1 1) surfaces, respectively. The preferential orientation and phase structure of the fibre-textured and epitaxial PNZT films, as well as their influences on the electrical properties were investigated. Higher remnant polarization (P_r) and piezoelectric coefficient (d₃₃) were obtained for the epitaxial PNZT films on Nb:STO substrates than that for the fibre-textured ones on platinized silicon substrates. For both fibre-textured and epitaxial cases, the PNZT films with [1 0 0]/[0 0 1] orientations show higher piezoelectric responses than [1 1 1]-oriented ones, whereas better ferroelectric properties can be obtained in the latter. The intrinsic and extrinsic contributions were discussed to explain the difference in electrical properties for differently oriented fibre-textured and epitaxial PNZT films on different substrates.     

重温Pb(ZrxTi1-x)O3铁电薄膜极化疲劳问题

具有ABO3型钙钛矿结构的Pb(ZrxTi1-x)O3 (PZT)展示出良好的铁电极化性能,是使用最广的铁电材料.然而,在将它应用于铁电存储时,PZT薄膜遭遇到极化疲劳问题而被SrBi2Ta2O9 (SBT)等铁电体所替代,这一问题至今未能得到妥善解决.文章首先通过变温极化疲劳实验充分理解PZT极化疲劳的基本过程,然后有针对性地进行材料设计,获得基本无极化疲劳的PZT铁电薄膜.     

Phase evolution and effect of pre-heating temperature on the characteristics of PZT thin films grown by using a triol sol--gel route

Lead zirconate titanate (PZT) films were fabricated on Pt(111)/Ti/SiO₂/Si(100) using the triol sol--gel method. The effect of the pre-heating temperature on the phase transformations, microstructures, electrical properties and ferroelectric properties of the PZT thin films was investigated. Randomly-oriented PZT thin films pre-heated at 400°C for 10?min and annealed at 600°C for 30?min showed well-defined ferroelectric hysteresis loops with a remanent polarization of 26.57?µC?cm^?2 and a coercive field of 115.42?kV?cm^?1. The dielectric constant and dielectric loss of the PZT films were 621 and 0.0395, respectively. The microstructures of the thin films are dense, crack-free and homogeneous with fine grains about 15–20?nm in size.     

The crystalline orientation and ferroelectric properties of Bi3.25La0.75Ti3O12 thin films mediated by the intermediate layer of LaNiO3

c-Axis-oriented and (1 1 7)-oriented Bi_3.25La_0.75Ti₃O₁₂ (BLT) thin films are successfully controlled by the intermediate layer of LaNiO₃ (LNO) with chemical solution deposition (CSD), respectively. X-ray diffraction (XRD) demonstrates that the structure and orientation of LNO thin films have a strong effect on the orientation of BLT thin films. Scanning electron microscopy suggests that BLT thin films on LNO electrode exhibit crack-free, uniform size grains and dense microstructure. A crystalline orientation dependent remanent polarization is observed in BLT thin films, and it is found that the remanent polarization (2P_r) of (1 1 7)-oriented films is larger than that of c-axis-oriented films. Our research directly demonstrates that the vector of the main spontaneous polarization in these layered perovskite materials (BLT) is along a-axis.     

Generation of oxygen vacancies in the surface of ferroelectric Pb(Nb,Zr,Ti)O3

Controlled generation of oxygen vacancies in the surface of ferroelectric thin films is crucial to study how surface reduction affects molecular adsorption and catalysis of gas-surface phenomena. We demonstrate the effective reduction in the surface of 4% niobium doped 20/80 PZT (PNZT) thin films. The sample was characterized by X-ray diffraction (XRD), Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM), and heated at 200, 250 and 300 °C in a high vacuum system at 10⁻⁵ T of H₂. Auger peak-to-peak intensities was used to study the elemental concentrations during the reduction experiment. High-resolution XPS spectra were acquired before and after reduction process for detecting the changes of the oxygen signal. Vacancies production rates as slow as 0.21% per minute were achieved and the temperature was not a key parameter in the process. Experiments at higher hydrogen pressures and lower temperatures might improve the control of the vacancies production.     

Thickness effect in Pb(Zr0.2Ti0.8)O3 ferroelectric thin films grown by pulsed laser deposition

Epitaxial Pb(Zr_,Ti)O₃ (PZT) thin films with thicknesses in the range of 50-200 nm and with 0.2 Zr/(Zr + Ti) ratio, were grown by pulsed laser deposition (PLD).The substrates used for PLD deposition are single crystalline 0.5% Nb-doped (1 0 0) SrTiO₃ (STON). SrRuO₃ (SRO) thin films were deposited as bottom and top electrodes in order to have minimum structural misfit, to insure on one side high quality growth, and on the other side to minimize the influence of the extended structural defects. Structural and electrical characterization was performed. The epitaxial PZT films are c-axis oriented and have an average roughness of 0.4 nm. The ferroelectric behavior was proved in all investigated films by the presence of the hysteresis loops and by the butterfly shape of the capacitance-voltage (C-V) characteristics. The ferroelectricity was present even in the samples with relative high leakage currents, down to a thickness of 50 nm. These results are essential when small thickness is needed for miniaturization of ferroelectric devices using PZT.