Thermochemistry of copper complex of 6-benzylaminopurine

The copper(II) complex of 6-benzylaminopurine (6-BAP) has been prepared with dihydrated cupric chloride and 6-benzylaminopurine. Infrared spectrum and thermal stabilities of the solid complex have been discussed. The constant-volume combustion energy, Δ_c U, has been determined as −12566.92±6.44 kJ mol⁻¹ by a precise rotating-bomb calorimeter at 298.15 K. From the results and other auxiliary quantities, the standard molar enthalpy of combustion, Δ_c H _m ^θ, and the standard molar of formation of the complex, Δ_f H _m ^θ, were calculated as −12558.24±6.44 and −842.50±6.47 kJ mol⁻¹, respectively.     

Heat capacities and thermodynamic properties of chrysanthemic acid

The heat capacities of chrysanthemic acid in the temperature range from 80 to 400 K were measured with a precise automatic adiabatic calorimeter. The chrysanthemic acid sample was prepared with the purity of 0.9855 mole fraction. A solid-liquid fusion phase transition was observed in the experimental temperature range. The melting point, T _m, enthalpy and entropy of fusion, Δ_fus H _m, Δ_fus S _m, were determined to be 390.741±0.002 K, 14.51±0.13 kJ mol^-1, 37.13±0.34 J mol^-1 K^-1, respectively. The thermodynamic functions of chrysanthemic acid, H _(T)-H_(298.15), S _(T)-S_(298.15) and G _(T)-G ₍₂₉₈.₁₅₎ were reported with a temperature interval of 5 K. The TG analysis under the heating rate of 10 K min^-1 confirmed that the thermal decomposition of the sample starts at ca. 410 K and terminates at ca. 471 K. The maximum decomposition rate was obtained at 466 K. The purity of the sample was determined by a fractional melting method. This revised version was published online in July 2006 with corrections to the Cover Date.     

Molar heat capacities and standard molar enthalpy of formation of 2-amino-5-methylpyridine

The heat capacities (C _p,m) of 2-amino-5-methylpyridine (AMP) were measured by a precision automated adiabatic calorimeter over the temperature range from 80 to 398 K. A solid-liquid phase transition was found in the range from 336 to 351 K with the peak heat capacity at 350.426 K. The melting temperature (T _m), the molar enthalpy (Δ_fus H _m⁰), and the molar entropy (Δ_fus S _m⁰) of fusion were determined to be 350.431±0.018 K, 18.108 kJ mol⁻¹ and 51.676 J K⁻¹ mol⁻¹, respectively. The mole fraction purity of the sample used was determined to be 0.99734 through the Van’t Hoff equation. The thermodynamic functions (H _T-H _298.15 and S _T-S _298.15) were calculated. The molar energy of combustion and the standard molar enthalpy of combustion were determined, ΔU _c(C₆H₈N₂,cr)= −3500.15±1.51 kJ mol⁻¹ and Δ_c H _m⁰ (C₆H₈N₂,cr)= −3502.64±1.51 kJ mol⁻¹, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. The standard molar enthalpy of formation of the crystalline compound was derived, Δ_r H _m⁰ (C₆H₈N₂,cr)= −1.74±0.57 kJ mol⁻¹.     

Low-temperature heat capacities and standard molar enthalpy of formation of aspirin

Molar heat capacities (C _p,m) of aspirin were precisely measured with a small sample precision automated adiabatic calorimeter over the temperature range from 78 to 383 K. No phase transition was observed in this temperature region. The polynomial function of C _p,m vs. T was established in the light of the low-temperature heat capacity measurements and least square fitting method. The corresponding function is as follows: for 78 K≤T≤383 K, C _p,m/J mol^-1 K^-1=19.086X ⁴+15.951X ³-5.2548X ²+90.192X+176.65, [X=(T-230.50/152.5)]. The thermodynamic functions on the base of the reference temperature of 298.15 K, {ΔH _T -ΔH _298.15} and {S _T-S _298.15}, were derived. Combustion energy of aspirin (Δ_c U _m) was determined by static bomb combustion calorimeter. Enthalpy of combustion (Δ_c H ^o _m) and enthalpy of formation (Δ_f H ^o _m) were derived through Δ_c U _m as - (3945.26±2.63) kJ mol^-1 and - (736.41±1.30) kJ mol^-1, respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

The thermodynamic properties of S-lactic acid

The enthalpies of combustion and formation of S-lactic acid at 298.15 K, Δ_c H _m^o(cr.) = −1337.9 ± 0.8 and Δ_f H _m^o(cr.) = −700.1 ± 0.9 kJ/mol, were determined by calorimetry. The temperature dependence of acid vapor pressure was studied by the transpiration method, and the enthalpy of its vaporization was obtained, Δ_vap H ^o(298.15 K) = 69.1 ± 1.0 kJ/mol. The temperature and enthalpy of fusion, T _m (330.4 K) and Δ_m H ^o(298.15 K) = 14.7 ± 0.2 kJ/mol, were determined by differential scanning calorimetry. The enthalpy of formation of the acid in the gas phase was obtained. Ab initio methods were used to perform a conformational analysis of the acid, calculate fundamental vibration frequencies, moments of inertia, and total and relative energies of the stablest conformers. Thermodynamic properties were calculated in the ideal gas state over the temperature range 0–1500 K. A thermodynamic analysis of mutual transformation processes (the formation of SS- and RS(meso)-lactides from S-lactic acid and the racemization of these lactides) and the formation of poly-(RS)-lactide from S-lactic acid and SS- and RS(meso)-lactides was performed.     

Thermochemical study of the solid complex Ho(PDC)3 (o-phen)

A novel solid complex, formulated as Ho(PDC)₃ (o-phen), has been obtained from the reaction of hydrate holmium chloride, ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen·H₂O) in absolute ethanol, which was characterized by elemental analysis, TG-DTG and IR spectrum. The enthalpy change of the reaction of complex formation from a solution of the reagents, Δ_rH_m^θ (sol), and the molar heat capacity of the complex, c_m, were determined as being –19.161±0.051 kJ mol^–1 and 79.264±1.218 J mol^–1 K^–1 at 298.15 K by using an RD-496 III heat conduction microcalorimeter. The enthalpy change of complex formation from the reaction of the reagents in the solid phase, Δ_rH_m^θ(s), was calculated as being (23.981±0.339) kJ mol^–1 on the basis of an appropriate thermochemical cycle and other auxiliary thermodynamic data. The thermodynamics of reaction of formation of the complex was investigated by the reaction in solution at the temperature range of 292.15–301.15 K. The constant-volume combustion energy of the complex, Δ_cU, was determined as being –16788.46±7.74 kJ mol^–1 by an RBC-II type rotating-bomb calorimeter at 298.15 K. Its standard enthalpy of combustion, Δ_cH_m^θ, and standard enthalpy of formation, Δ_fH_m^θ, were calculated to be –16803.95±7.74 and –1115.42±8.94 kJ mol^–1, respectively.     

Thermochemical studies on the thioproline

The combustion energy of thioproline was determined by the precision rotating-bomb calorimeter at 298.15 K to be Δ_c U= –2469.30±1.44 kJ mol^–1. From the results and other auxiliary quantities, the standard molar enthalpy of combustion and the standard molar enthalpy of formation of thioproline were calculated to be Δ_c H _m ^θC₄H₇NO₂S, (s), 298.15 K= –2469.92±1.44 kJ mol^–1 and Δ_f H _m ^θC₄H₇NO₂S, (s), 298.15K= –401.33±1.54 kJ mol^–1.     

Thermodynamic investigation of several natural polyols

The low-temperature heat capacity C _p,m of erythritol (C₄H₁₀O₄, CAS 149-32-6) was precisely measured in the temperature range from 80 to 410 K by means of a small sample automated adiabatic calorimeter. A solid-liquid phase transition was found at T=390.254 K from the experimental C _p-T curve. The molar enthalpy and entropy of this transition were determined to be 37.92±0.19 kJ mol⁻¹ and 97.17±0.49 J K⁻¹ mol⁻¹, respectively. The thermodynamic functions [H _T-H _298.15] and [S _T-S _298.15], were derived from the heat capacity data in the temperature range of 80 to 410 K with an interval of 5 K. The standard molar enthalpy of combustion and the standard molar enthalpy of formation of the compound have been determined: Δ_c H _m⁰(C₄H₁₀O₄, cr)= −2102.90±1.56 kJ mol⁻¹ and Δ_f H _m⁰(C₄H₁₀O₄, cr)= − 900.29±0.84 kJ mol⁻¹, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. DSC and TG measurements were performed to study the thermostability of the compound. The results were in agreement with those obtained from heat capacity measurements.     

A thermal and thermochemical study of natural hemimorphite

A thermal and thermochemical study of natural aqueous hydroxyl-containing diorthosilicate, hemimorphite Zn₄[Si₂O₇](OH)₂ · H₂O, was performed. The step character of its thermal decomposition was studied using FTIR spectroscopy. Melt solution calorimetry was used to determine the enthalpies of formation from oxides Δ_f H _O^OX (298.15 K) = −69.3 ± 9.9 kJ/mol and elements {ie1481-2} (298.15 K) = −3864.3 ± 10.2 kJ/mol.     

Calorimetric determination enthalpy of the formation of natural pyromorphite

A calorimetric study of natural pyromorphite Pb₅[PO₄]₃Cl was performed. Its enthalpy of formation was determined by melt solution calorimetry from elements Δ_f H _el^∘(298.15 K) = −4124 ± 20 kJ/mol. Value Δ_f G _el^o(298.15 K) = −3765 ± 20 kJ/mol was calculated.     

Some thermodynamic aspects of nitrides in materials science

The energies of combustion in fluorine of gallium nitride and indium nitride in wurzite crystalline structure have been measured in a two-compartment calorimetric bomb, and new standard molar enthalpies of formation have been calculated: Δ_fH_m⁰(GaN(cr) 298.15 K)= –(163.7±4.2) kJ mol^–1 and Δ_fH_m⁰(InN(cr) 298.15 K)= –(146.5±4.6) kJ mol^–1 . Comparison with the recommended values of the Δ_fH_m⁰ nitrides from the literature is also presented.     

Constant-volume combustion energy of the lead salts of 2HDNPPb and 4HDNPPb and their effect on combustion characteristics of RDX–CMDB propellant

The constant-volume combustion energies of the lead salts of 2-hydroxy-3,5-dinitropyridine (2HDNPPb) and 4-hydroxy-3,5-dinitropyridine (4HDNPPb), ΔU _c (2HDNPPb(s) and 4HDNPP(s)), were determined as –4441.92±2.43 and –4515.74±1.92 kJ mol^–1 , respectively, at 298.15 K. Their standard enthalpies of combustion, Δ_c ^m H θ(2HDNPPb(s) and 4HDNPPb(s), 298.15 K), and standard enthalpies of formation, Δ_r ^m H θ(2HDNPPb(s) and 4HDNPPb(s), 298.15 K) were as –4425.81±2.43, –4499.63±1.92 kJ mol^–1 and –870.43±2.76, –796.65±2.32 kJ mol^–1 , respectively. As two combustion catalysts, 2HDNPPb and 4HDNPPb can enhance the burning rate and reduce the pressure exponent of RDX–CMDB propellant.     

Thermochemistry of europium and dithiocarbamate complex Eu(C5H8NS2)3(C12H8N2)

A solid complex Eu(C₅H₈NS₂)₃(C₁₂H₈N₂) has been obtained from reaction of hydrous europium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen⋅H₂O) in absolute ethanol. IR spectrum of the complex indicated that Eu³⁺ in the complex coordinated with sulfur atoms from the APDC and nitrogen atoms from the o-phen. TG-DTG investigation provided the evidence that the title complex was decomposed into EuS. The enthalpy change of the reaction of formation of the complex in ethanol, Δ_r H _m ^θ(l), as –22.214±0.081 kJ mol^–1, and the molar heat capacity of the complex, c _m, as 61.676±0.651 J mol^–1 K^–1, at 298.15 K were determined by an RD-496 III type microcalorimeter. The enthalpy change of the reaction of formation of the complex in solid, Δ_r H _m ^θ(s), was calculated as 54.527±0.314 kJ mol^–1 through a thermochemistry cycle. Based on the thermodynamics and kinetics on the reaction of formation of the complex in ethanol at different temperatures, fundamental parameters, including the activation enthalpy (ΔH _≠ ^θ), the activation entropy (ΔS _≠ ^θ), the activation free energy (ΔG _≠ ^θ), the apparent reaction rate constant (k), the apparent activation energy (E), the pre-exponential constant (A) and the reaction order (n), were obtained. The constant-volume combustion energy of the complex, Δ_c U, was determined as –16937.88±9.79 kJ mol^–1 by an RBC-II type rotating-bomb calorimeter at 298.15 K. Its standard enthalpy of combustion, Δ_c H _m ^θ, and standard enthalpy of formation, Δ_f H _m ^θ, were calculated to be –16953.37±9.79 and –1708.23±10.69 kJ mol^–1, respectively.     

Standard enthalpy of formation of 3,4,5-trimethoxybenzoic acid

The energy of combustion of crystalline 3,4,5-trimethoxybenzoic acid in oxygen at T=298.15 K was determined to be -4795.9±1.3 kJ mol^-1 using combustion calorimetry. The derived standard molar enthalpies of formation of 3,4,5-trimethoxybenzoic acid in crystalline and gaseous states at T=298.15 K, Δ_fH_m ^Θ (cr) and Δ_fH_m ^Θ (g), were -852.9±1.9 and -721.7±2.0 kJ mol^-1, respectively. The reliability of the results obtained was commented upon and compared with literature values. This revised version was published online in August 2006 with corrections to the Cover Date.     

Stationary points on the energy hypersurface of the reaction O3 + H•→ [•O3H]* ⇆ O2 + •OH and thermodynamic functions of •O3H at G3MP2B3, CCSD(T)-CBS (W1U) and MR-ACPF-CBS levels of theory

The relative enthalpies, ΔH^o (0) and ΔH^o (298.15), of stationary points (four minimum and three transition structures) on the ^•O₃H potential energy surface were calculated with the aid of the G3MP2B3 as well as the CCSD(T)–CBS (W1U) procedures from which we earlier found mean absolute deviations (MAD) of 3.9 kJ mol⁻¹ and 2.3 kJ mol⁻¹, respectively, between experimental and calculated standard enthalpies of the formation of a set of 32 free radicals. For CCSD(T)-CBS (W1U) the well depth from O₃ + H^• to trans-^•O₃H, ΔH^o_well(298.15) = −339.1 kJ mol⁻¹, as well as the reaction enthalpy of the overall reaction O₃ + H^•→O₂ + ^•OH, Δ_rH^o(298.15) = −333.7 kJ mol⁻¹, and the barrier of bond dissociation of trans-^•O₃H → O₂ + ^•OH, ΔH^o(298.15) = 22.3 kJ mol⁻¹, affirm the stable short-lived intermediate ^•O₃H. In addition, for radicals cis-^•O₃H and trans-^•O₃H, the thermodynamic functions heat capacity C^o_p(T), entropy S^o (T), and thermal energy content H^o(T) − H^o(0) are tabulated in the range of 100 − 3000 K. The much debated calculated standard enthalpy of the formation of the trans-^•O₃H resulted to be Δ_fH^o(298.15) = 31.1 kJ mol ⁻¹ and 32.9 kJ mol ⁻¹, at the G3MP2B3 and CCSD(T)-CBS (W1U) levels of theory, respectively. In addition, MR-ACPF-CBS calculations were applied to consider possible multiconfiguration effects and yield Δ_fH^o(298.15) = 21.2 kJ mol ⁻¹. The discrepancy between calculated values and the experimental value of −4.2 ± 21 kJ mol⁻¹ is still unresolved. Note added in proof: Yu-Ran Luo and J. Alistair Kerr, based on the discussion in reference 12, recently presented an experimental value of Δ_fH^o(298.15) = 29.7 ± 8.4 kJ mol⁻¹ in the 85th edition of the CRC Handbook of Chemistry and Physics (in progress).     

Enthalpy of formation of BaCe<Subscript>0.9</Subscript>In<Subscript>0.1</Subscript>O<Subscript>3−δ</Subscript>(s)

Enthalpy of formation of the perovskite-related oxide BaCe_0.9In_0.1O_2.95 has been determined at 298.15 K by solution calorimetry. Solution enthalpies of barium cerate doped with indium and mixture of BaCl₂, CeCl₃, InCl₃ in ratio 1:0.9:0.1 have been measured in 1 M HCl with 0.1 M KI. The standard formation enthalpy of BaCe_0.9In_0.1O_2.95 has been calculated as −1611.7±2.6 kJ mol⁻¹. Room-temperature stability of this compound has been assessed in terms of parent binary oxides. The formation enthalpy of barium cerate doped by indium from the mixture of binary oxides is Δ_ox H ⁰ (298.15 K)=−36.2±3.4 kJ mol⁻¹.     

Thermochemistry of the ternary solid complex Gd(C5H8NS2)3(C12H8N2)

The novel ternary solid complex Gd(C₅H₈NS₂)₃(C₁₂H₈N₂) has been obtained from the reaction of hydrous gadolinium chloride, ammonium pyrrolidinedithiocarbamate (APDC), and 1,10-phenanthroline (o-phen · H₂O) in absolute ethanol. The complex was described by an elemental analysis, TG-DTG, and an IR spectrum. The enthalpy change of the complex formation reaction from a solution of the reagents, Δ_r H _m ^ϑ (sol), and the molar heat capacity of the complex, c _m , were determined as being − 15.174 ± 0.053 kJ/mol and 72.377 ± 0.636 J/(mol K) at 298.15 K by using an RD496-III heat conduction microcalorimeter. The enthalpy change of a complex formation from the reaction of the reagents in a solid phase, Δ_r H _m ^ϑ (s), was calculated as being 52.703 ± 0.304 kJ/mol on the basis of an appropriate thermochemical cycle and other auxiliary thermodynamic data. The thermodynamics of the formation reaction of the complex was investigated by the reaction in solution. Fundamental parameters, the activation enthalpy (ΔH _≠ ^ϑ ), the activation entropy (ΔS _≠ ^ϑ ), the activation free energy (ΔG _≠ ^ϑ ), the apparent reaction rate constant (k), the apparent activation energy (E), the preexponential constant (A), and the reaction order (n), were obtained by the combination of the thermochemical data of the reaction and kinetic equations, with the data of thermokinetic experiments. The constant-volume combustion energy of the complex, Δ_c U, was determined as being −17588.79 ± 8.62 kJ/mol by an RBC-II type rotatingbomb calorimeter at 298.15 K. Its standard enthalpy of combustion, Δ_c H _m ^ϑ , and standard enthalpy of formation, Δ_f H _m ^ϑ , were calculated to be −17604.28 ± 8.62 and −282.43 ± 9.58 kJ/mol, respectively. The text was submitted by the authors in English.     

Heat capacities and thermodynamic properties of 2-benzoylpyridine (C12H9NO)

The heat capacities of 2-benzoylpyridine were measured with an automated adiabatic calorimeter over the temperature range from 80 to 340 K. The melting point, molar enthalpy, Δ_fusH^m, and entropy, Δ_fusS^m, of fusion of this compound were determined to be 316.49±0.04 K, 20.91±0.03 kJ mol^–1 and 66.07±0.05 J mol^–1 K^–1, respectively. The purity of the compound was calculated to be 99.60 mol% by using the fractional melting technique. The thermodynamic functions (H_T–H_298.15) and (S_T–S_298.15) were calculated based on the heat capacity measurements in the temperature range of 80–340 K with an interval of 5 K. The thermal properties of the compound were further investigated by differential scanning calorimetry (DSC). From the DSC curve, the temperature corresponding to the maximum evaporation rate, the molar enthalpy and entropy of evaporation were determined to be 556.3±0.1 K, 51.3±0.2 kJ mol^–1 and 92.2±0.4 J K^–1 mol^–1, respectively, under the experimental conditions.     

Heat capacity,enthalpy and entropy of calcium niobates

Heat capacity and enthalpy increments of calcium niobates CaNb₂O₆ and Ca₂Nb₂O₇ were measured by the relaxation time method (2–300 K), DSC (260–360 K) and drop calorimetry (669–1421 K). Temperature dependencies of the molar heat capacity in the form C _pm=200.4+0.03432T−3.450·10⁶/T ² J K⁻¹ mol⁻¹ for CaNb₂O₆ and C _pm=257.2+0.03621T−4.435·10⁶/T ² J K⁻¹ mol⁻¹ for Ca₂Nb₂O₇ were derived by the least-squares method from the experimental data. The molar entropies at 298.15 K, S _m⁰(CaNb₂O₆, 298.15 K)=167.3±0.9 J K⁻¹ mol⁻¹ and S _m⁰(Ca₂Nb₂O₇, 298.15 K)=212.4±1.2 J K⁻¹ mol⁻¹, were evaluated from the low temperature heat capacity measurements. Standard enthalpies of formation at 298.15 K were derived using published values of Gibbs energy of formation and presented heat capacity and entropy data: Δ_f H ⁰(CaNb₂O₆, 298.15 K)= −2664.52 kJ mol^t-1 and Δ_f H ⁰(Ca₂Nb₂O₇, 298.15 K)= −3346.91 kJ mol⁻¹.     

Thermodynamic and kinetic behaviour of salicylsalicylic acid

The thermal behaviour of salicylsalicylic acid (CAS number 552-94-3) was studied by differential scanning calorimetry (DSC). The endothermic melting peak and the fingerprint of the glass transition were characterised at a heating rate of 10°C min^-1. The melting peak showed an onset at T _on = 144°C (417 K) and a maximum intensity at T _max = 152°C (425 K), while the onset of the glass transition signal was at T _on = 6°C. The melting enthalpy was found to be Δ_mH = 28.9±0.3 kJ mol^-1, and the heat capacity jump at the glass transition was ΔC _P = 108.1±0.1 J K^-1mol^-1. The study of the influence of the heating rate on the temperature location of the glass transition signal by DSC, allowed the determination of the activation energy at the glass transition temperature (245 kJ mol^-1), and the calculation of the fragility index of salicyl salicylate (m = 45). Finally, the standard molar enthalpy of formation of crystalline monoclinic salicylsalicylic acid at T = 298.15 K, was determined as Δ_fH_m ^o(C₁₄H₁₀O₅, cr) = - (837.6±3.3) kJ mol^-1, by combustion calorimetry. This revised version was published online in August 2006 with corrections to the Cover Date.