Arsenic speciation in Chinese brake fern by ion-pair high-performance liquid chromatography-inductively coupled plasma mass spectroscopy

Ion-pair reverse-phase HPLC-inductively coupled plasma (ICP) MS was employed to determine arsenite [As(III)], dimethyl arsenic acid (DMA), monomethyl arsenic (MMA) and arsenate [As(V)] in Chinese brake fern (Pteris vittata L.). The separation was performed on a reverse-phase C18 column (Haisil 100) by using a mobile phase containing 10 mM hexadecyltrimethyl ammonium bromide (CTAB) as ion-pairing reagent, 20 mM ammonium phosphate buffer and 2% methanol at pH 6.0. The detection limits of arsenic species with HPLC-ICP-MS were 0.5, 0.4, 0.3 and 1.8 ppb of arsenic for As(III), DMA, MMA, and As(V), respectively. MMA has been shown for the first time to experimentally convert to DMA in the Chinese brake fern, indicating that Chinese brake fern can convert MMA to DMA by methylation.     

Speciation of arsenic compounds by HPLC with hydride generation atomic absorption spectrometry and inductively coupled plasma mass spectrometry detection

An arsenic specific detection system utilizing on-line microwave digestion and hydride generation atomic absorption spectrometry (MD/HGAAS) is described for arsenic speciation by using high performance liquid chromatography (HPLC). Both ion exchange chromatography and ion pair chromatography have been studied for the separation of arsenite, arsenate, monomethylarsonic acid (MMAA), dimethylarsinic acid (DMAA), and arsenobetaine (AB). When the commonly used mobile phases, phosphate and carbonate buffers at pH 7.5, are used on an anion exchange column, arsenite and AB co-elute. However, selective determination of these two arsenic compounds can be achieved by using the new detection system. Partial separation between arsenite and AB can be achieved by increasing the mobile phase pH to 10.3 and by using a polymer based anion exchange column. The detection limit obtained by using anion exchange chromatography with MD/HGAAS detection is approximately 10 ng/ml (or 200 pg for a 20-mul sample injection) for arsenite, DMAA and AB, 15 ng/ml (or 300 pg) for MMAA, and 20 ng/ml (or 400 pg) for arsenate. Complete separation of the five arsenic compounds is achieved on a reversed phase C18 column by using sodium heptanesulfonate as ion pair reagent. Comparable resolution between chromatographic peaks is obtained by using MD/HGAAS detection and inductively coupled plasma mass spectrometry (ICPMS) detection.     

Simultaneous separation and determination of six arsenic species in rice by anion‐exchange chromatography with inductively coupled plasma mass spectrometry

The simultaneous separation and determination of arsenite As(III), arsenate As(V), monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), arsenobetaine (AsB), and arsenocholine (AsC) in rice samples have been carried out in one single anion‐exchange column run by high‐performance liquid chromatography with inductively coupled plasma mass spectrometry. To estimate the effect of variables on arsenic (As) speciation, the chromatographic conditions including type of competing anion, ionic strength, pH of elution buffer, and flow rate of mobile phase have been investigated by a univariate approach. Under the optimum chromatographic conditions, baseline separation of six As species has been achieved within 10 min by gradient elution program using 4 mM NH₄HCO₃ at pH 8.6 as mobile phase A and 4 mM NH₄HCO₃, 40 mM NH₄NO₃ at pH 8.6 as mobile phase B. The method detection limits for As(III), As(V), MMA, DMA, AsB, and AsC were 0.4, 0.9, 0.2, 0.4, 0.5, and 0.3 μg/kg, respectively. The proposed method has been applied to separation and quantification of As species in real rice samples collected from Hunan Province, China. The main As species detected in all samples were As(III), As(V) and DMA, with inorganic As accounting for over 80% of total As in these samples.     

High-performance liquid chromatography with hydride generation/atomic absorption spectrometry for the determination of arsenic species with application to some water samples

High-performance liquid chromatography (h.p.l.c.) is used for separation of arsenite, arsenate, monomethylarsinate (MMA) and dimethylarsonate (DMA) followed by continuous sodium tetrahydroborate reduction and atomic absorption spectrometric detection. Sample preconcentration, offering improved detection limits for the individual species and the removal of matrix interferences, is achieved with a pellicular anion-exchange column. The arsenic species are then separated on a strong anion-exchange column placed in series with the preconcentration column. Detection limits of 2 ng (as arsenic) for arsenite, arsenate and MMA, and 1 ng for DMA. Results for arsenic species in soil waters and commercial bottle waters are given.     

Stability study of As(III), As(V), MMA and DMA by anion exchange chromatography and HG-AFS in wastewater samples

The stability of arsenic species (arsenate [As(V)], monomethylarsonate [MMA], dimethylarsinate [DMA] and arsenite [As(III)]) in two types of urban wastewater samples (raw and treated) was evaluated. Water samples containing a mixture of the different arsenic species were stored in the absence of light at three different temperatures: +4 degrees C, +20 degrees C and +40 degrees C. At regular time intervals, arsenic species were determined by high performance liquid chromatography (HPLC)-hydride generation (HG)-atomic fluorescence spectrometry (AFS). The experimental conditions for the separation of arsenic species by HPLC and their determination by AFS were directly optimised from wastewater samples. As(III), As(V), MMA and DMA were separated on an anion exchange column using phosphate buffer (pH 6.0) as the mobile phase. Under these conditions the four arsenic species were separated in less than 10 min. The detection limits were 0.6, 0.9, 0.9 and 1.8 micro g L(-1) for As(III), DMA, MMA and As(V), respectively. As(V), MMA and DMA were found stable in the two types of urban wastewater samples over the 4-month period at the three different temperatures tested, while the concentration of As(III) in raw wastewater sample decreased after 2 weeks of storage. A greater stability of As(III) was found in the treated urban wastewater sample. As(III) remained unaltered in this matrix at pH 7.27 over the period studied, while at lower pH (1.6) losses of As(III) were detected after 1 month of storage. The results show that the decrease in As(III) concentration with time was accompanied by an increase in As(V) concentration.     

Simultaneous separation of 17 inorganic and organic arsenic compounds in marine biota by means of high-performance liquid chromatography/inductively coupled plasma mass spectrometry

A method using high-performance liquid chromatography/inductively coupled plasma mass spectrometry (HPLC/ICP-MS) has been developed to determine inorganic arsenic (arsenite, arsenate) along with organic arsenic compounds (monomethylarsonic acid, dimethylarsinic acid, arsenobetaine, arsenocholine, trimethylarsine oxide, tetramethylarsonium ion and several arsenosugars) in fish, mussel, oyster and marine algae samples. The species were extracted by means of a methanol/water mixture and a dispersion unit in 2 min, with extraction efficiencies ranging from 83 to 107% in the different organisms. Up to 17 different species were determined within 15 min on an anion-exchange column, using a nitric acid gradient and an ion-pairing reagent. As all species are shown in one chromatogram, a clear overview of arsenic distribution patterns in different marine organisms is given. Arsenobetaine is the major compound in marine animals whereas arsenosugars and arsenate are dominant in marine algae. The method was validated with CRM DORM-2 (dogfish muscle). Concentrations were within the certified limits and low detection limits of 8 ng g(-1) (arsenite) to 50 ng g(-1) (arsenate) were obtained.     

Regeneration of tetrabutylammonium ion-pairing reagent distribution in a gradient elution of reversed phase ion-pair chromatography

The regeneration of ion-pairing reagent distribution on liquid chromatography columns after gradient elution has been well recognized as the cause for long column equilibration time, a major drawback associated with gradient elution reverse phase ion-pair chromatography. To date, the majority of studies have focused on optimizing the separation conditions to shorten the equilibration time. There is limited understanding of the ion-pairing reagent distribution process between the mobile phase and stationary phase in the course of gradient elution, and subsequent column re-equilibration. The focus of this work is to gain a better understanding of this process. An ion-pair chromatographic system, equipped with a YMC ODS C(18) column and a mobile phase containing tetrabutylammonium (TBA) hydroxide as the ion-pairing reagent, was used in the study. The TBA distribution profile was established by measuring its concentration in the eluent fractions collected during the gradient cycle using different column equilibration times with an ion chromatographic method. Furthermore, the analyte retention time was evaluated as the function of the column equilibration time and TBA concentration in the mobile phase. The column equilibration and its impact on the method robustness will also be discussed.     

Retention behavior of arsenobetaine, arsenocholine, trimethylarsine oxide and tetramethylarsonium iodide on a styrene-divinylbenzene column with benzenesulfonates as ion-pairing reagents

The pH-dependent retention behavior of arsenobetaine, arsenocholine, trimethylarsine oxide, tetramethylarsonium iodide (cationic arsenic compounds), arsenite, arsenate, methylarsonic acid, and dimethylarsinic acid (anionic arsenic compounds) was studied on a Hamilton PRP-1 reversed-phase column (250×4.1 mm I.D.) with 10 mM aqueous solutions of benzensulfonic acids (X-C₆H₄SO₃⁻; X=H, 4-HO, 3-CO₂H; 4-HO-3-HO₂C-C₆H₃SO₃⁻) as ion-pairing reagents in the pH range 2–5 using flame atomic absorption spectrometry as the arsenic-specific detector. The dependencies of the k′-values of the ‘cationic’ arsenic compounds was rationalized on the basis of the protonation/deprotonation behavior of the arsenic compounds and of the four benzenesulfonates. The results provided evidence for the formation of a cationic species from trimethylarsine oxide below pH 3. Benzenesulfonate is the most hydrophobic ion-pairing reagent causing strong retention of the cationic arsenic compounds and consequently impeding their rapid separation. With the less hydrophobic, substituted benzenesulfonates the cationic arsenic compounds had retention times not exceeding 6 min. At a flow-rate of 1.5 cm³ min⁻¹ 10 mM aqueous 3-carboxy-4-hydroxybenzenesulfonate solution adjusted to pH 3.5 allowed the separation of arsenate, methylarsonic acid, arsenobetaine, trimethylarsine oxide, the tetramethylarsonium ion, and arsenocholine within 3 min. Dimethylarsinic acid coelutes with arsenobetaine at pH 3.5, but can be separated from arsenobetaine with the same mobile phase at pH 2.5. At pH 2.5 the signals for trimethylarsine oxide, the tetramethylarsonium ion, and arsenocholine are too broad to be useful for quantification. Arsenite and methylarsonic acid cannot be separated under these conditions.     

The effect of arsenicals on alkaloid production by cell suspension cultures of Catharanthus roseus

The effect of arsenic compounds on indole alkaloid production by cell suspension cultures of Catharanthus roseus was investigated. The analysis of indole alkaloids was achieved by using thermospray liquid chromatography-mass spectrometry (LC MS) which facilitated the rapid screening of alkaloid composition in cultures treated with different arsenicals at different times in their growth cycle. Treatment with dimethylarsinate (DMA), a non-selective herbicide, has a drastic inhibitory effect on alkaloid production although it is the least toxic arsenical to growth. Tryptamine, an early precursor in the biosynthesis of indole alkaloids, accumulates in cells treated with DMA, indicating that the initial step of condensation of tryptamine with secologanin is inhibited. Treatment with DMA during the early stationary phase of culture growth enhances the accumulation of some alkaloids, although some, such as catharanthine, are suppressed. The arsenicals arsenate and methylarsonate (MMA) have an inhibitory effect on alkaloid production when applied during the early growth stages. In contrast to MMA and DMA, arsenate has a stimulatory effect on catharanthine production when introduced to the culture during its early stationary phase. Thus the changes in the pattern of alkaloid accumulation on addition of arsenicals are dependent on the arsenic species and its concentration, as well as the time of application. This variable response indicates that each arsenical has a distinct mode of action on the secondary metabolic pathways of C. roseus.     

Arsenic speciation based on ion exchange high-performance liquid chromatography hyphenated with hydride generation atomic fluorescence and on-line UV photo oxidation

An on-line method capable of the separation of arsenic species was developed for the speciation of arsenite As(III), arsenate As(V), monomethylarsenic (MMA) and dimethylarsenic acid (DMA) in biological samples. The method is based on the combination of high-performance liquid chromatograph (HPLC) for separation, UV photo oxidation for sample digestion and hydride generation atomic fluorescence spectrometry (HGAFS) for sensitive detection. The best separation results were obtained with an anion-exchange AS11 column protected by an AG11 guard column, and gradient elution with NaH2PO4 and water as mobile phase. The on-line UV photo oxidation with 1.5% K2S2O8 in 0.2 mol L(-1) NaOH in an 8 m PTFE coil for 40 s ensures the digestion of organoarsenic compounds. Detection limits for the four species were in the range of 0.11-0.15 ng (20 microL injected). Procedures were validated by analysis of the certified reference materials GBW09103 freeze-dried human urine and the results were in good agreement with the certified values of total arsenic concentration. The method has been successfully applied to speciation studies of blood arsenic species with no need of sample pretreatment. Speciation of arsenic in blood samples collected from two patients after the ingestion of realgar-containing drug reveals slight increase of arsenite and DMA, resulting from the digestion of realgar.     

Development of an Ion-Pairing Liquid Chromatography Method for the Determination of Phenoxyacetic Herbicides and Their Main Metabolites: Application to the Analysis of Soil Samples

A modified ion-pairing liquid chromatography method is developed for the analysis of 2,4-dichlorophenoxyacetic acid (2,4-D), 4-chloro-2-methylphenoxyacetic acid (MCPA) and their phenolic metabolites in water and soil samples. The separation and determination of all compounds of interest can be performed with a mobile phase containing 30% acetonitrile and 10 mM tetrabutylammonium hydroxide as the ion-pairing reagent. Separation of the two phenoxyacids is strongly affected by the pH of the mobile phase, which has to be buffered to pH 7.2 with phosphoric acid. The increase in the hydrophobicity of the sample solvent results in wider peaks for the two phenoxyacids, which reduces the resolution in their separation. The evaluation of different methanol:water solvent mixtures shows that no baseline separation for the two phenoxyacids is obtained when the methanol content in the mixture is higher than 60%.     

Quantitative aspects of the separation of arsenical species by free solution capillary electrophoresis

Capillary zone electrophoresis has been used for the separation of arsenite, arsenate, monomethylarsonic acid (MMA), dimethylarsinic acid (DMA) and phenylarsonic acid. The separation was achieved using a fused silica capillary filled with a phosphate buffer. The on-column U.V. detector was operated at 190 nm. The influence of voltage and injected volume, reproducibility of calibration and recovery from a drinking water sample were studied. Using the calibration plot method and phenylarsonic acid as internal standard the mean recoveries for arsenate, MMA and DMA were 104%, 97% and 97% respectively.     

Speciation of Arsenic in Rice by Ion Chromatography with Online Anion Suppression and Inductively Coupled Plasma Mass Spectrometry

Arsenic speciation in rice has received attention due to its impact on food safety and human health. In this study, a sensitive method was developed for the determination of inorganic arsenic in rice using online anion suppression with ion chromatography and inductively coupled plasma mass spectrometry. HCl of 0.01?mol/L was the optimal extracting agent, and 38?mmol/L sodium carbonate and 15?mmol/L sodium acetate were used as the mobile phase to separate dimethylarsinic acid (DMA), arsenite, monomethylarsonic acid (MMA), and arsenate. The results showed that there were no significant losses or transformations with the anion suppressor and an improvement in sensitivity. The limits of quantification were 0.1?µg/L for DMA, As(III) and MMA, and 0.2?µg/L for As(V). The procedure was used to determine inorganic arsenic in rice; As(III) and DMA were the primary forms present. The reproducibility from seven measurements showed that the relative standard deviation was less than 1.68%. The recoveries were from 99.76 to 110.42%. The present work offers a new approach for the determination of inorganic arsenic in rice.     

Evaluation of liquid chromatography inductively coupled plasma mass spectrometry for arsenic speciation in water from industrial treatment of shale

This work describes an arsenic speciation analysis in aqueous effluent from a shale industrial plant using liquid chromatography coupled to inductively coupled plasma mass spectrometry (LC–ICP–MS). Arsenic species have been separated through an anion-exchange column and several parameters investigated, such as retention time, pH, flow rate and concentration of the mobile phase (ammonium carbonate), chloride interference and column conditioning time. The best conditions have been found by fixing the pH of the mobile phase at 8.7. Keeping the mobile phase flow rate at 1.5 ml min^− 1, arsenic species were separated by varying the concentration of the mobile phase and the time of elution, as follow: 1.5 mmol l^− 1 for 10 min, 12 mmol l^− 1 for 10 min and 20 mmol l^− 1 for 10 min, respectively. Up to 13 As species present in the samples were separated under these conditions and the following species could be identified and quantified: arsenite [As(III)], dimethylarsinic acid (DMA), monomethylarsonic acid (MMA) and arsenate [As(V)]. The limits of detection of the LC–ICP–MS method were 0.02, 0.06, 0.04 and 0.10 μg l^− 1 of As(III), DMA, MMA, and As(V), respectively. The concentration of these species in the samples were from 3.7 to 6.4 μg l^− 1, 6.9 to 13.2 μg l^− 1, 100 to 142 μg l^− 1 and 808 to 1363 μg l^− 1 for As(III), DMA, MMA and As(V), respectively. The accuracy, evaluated by recovery tests, varied from 94 to 105% and the precision, evaluated by the relative standard deviation was typically lower than 10%.     

Arsenic speciation based on ion exchange high-performance liquid chromatography hyphenated with hydride generation atomic fluorescence and on-line UV photo oxidation

An on-line method capable of the separation of arsenic species was developed for the speciation of arsenite As(III), arsenate As(V), monomethylarsenic (MMA) and dimethylarsenic acid (DMA) in biological samples. The method is based on the combination of high-performance liquid chromatograph (HPLC) for separation, UV photo oxidation for sample digestion and hydride generation atomic fluorescence spectrometry (HGAFS) for sensitive detection. The best separation results were obtained with an anion-exchange AS11 column protected by an AG11 guard column, and gradient elution with NaH₂PO₄ and water as mobile phase. The on-line UV photo oxidation with 1.5% K₂S₂O₈ in 0.2 mol L^–1 NaOH in an 8 m PTFE coil for 40 s ensures the digestion of organoarsenic compounds. Detection limits for the four species were in the range of 0.11–0.15 ng (20 μL injected). Procedures were validated by analysis of the certified reference materials GBW09103 freeze-dried human urine and the results were in good agreement with the certified values of total arsenic concentration. The method has been successfully applied to speciation studies of blood arsenic species with no need of sample pretreatment. Speciation of arsenic in blood samples collected from two patients after the ingestion of realgar-containing drug reveals slight increase of arsenite and DMA, resulting from the digestion of realgar.     

反相离子对色谱-电感耦合等离子体质谱联用技术测定水中痕量Cr(Ⅲ)与Cr(Ⅵ)

建立了反相离子对色谱(RPIPC)与电感耦合等离子体质谱(ICP-MS)联用技术快速分离测定水中痕量Cr(Ⅲ)和Cr(Ⅵ)的方法.通过考察流动相的pH值、离子对试剂及甲醇的浓度和EDTA的添加等对不同形态铬的保留时间及分离度的影响,确定当流动相组成为2.0 mmol/L TBA,5%(V/V)甲醇,pH=5.5时,Cr(Ⅲ)与Cr(Ⅵ)可达最佳分离.ICP-MS测定时选用碰撞池技术以消除40Ar12C+与35Cl16OH+对52Cr+的谱学干扰;进样100 μL时,Cr(Ⅲ)与Cr(Ⅵ)的检出限分别为0.15 μg/L和0.16 μg/L.加标回收率在93.6%～106.2%之间; RSD<4%(n=3).以本方法分析了某市自来水、雨水及某品牌纯净水中Cr(Ⅲ)与Cr(Ⅵ)的含量,结果令人满意.     

Coupled high performance liquid chromatography-microwave digestion-hydride generation-atomic absorption spectrometry for inorganic and organic arsenic speciation in fish tissue

A high performance liquid chromatography-microwave digestion-hydride generation-atomic absorption spectrometry (HPLC-MW-HG-AAS) coupled method is described for As(III), As(V), monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), arsenobetaine (AsB) and arsenocholine (AsC) determination. A Hamilton PRP-X100 anion-exchange column is used for carrying out the arsenic species separation. As mobile phase 17 mM phosphate buffer (pH 6.0) is used for As(III), As(V), MMA and DMA separation, and ultrapure water (pH 6.0) for AsB and AsC separation. Prior to injection into the HPLC system AsB and AsC are isolated from the other arsenic species using a Waters Accell Plus QMA cartridge. A microwave digestion with K(2)S(2)O(8) as oxidizing agent is used for enhancing the efficiency of conversion of AsB and AsC into arsenate. Detection limits achieved were between 0.3 and 1.1 ng for all species. The method was applied to arsenic speciation in fish samples.     

Insights into the mechanism of separation of heparin and heparan sulfate disaccharides by reverse-phase ion-pair chromatography

Reverse-phase ion-pair high performance liquid chromatography (RPIP-HPLC) and ultra-performance liquid chromatography (RPIP-UPLC) are increasingly popular chromatographic techniques for the separation of organic compounds. However, the fine details of the RPIP separation mechanism are still being debated. Many factors including type and concentration of the ion-pairing reagent, mobile phase pH, organic modifier, ionic strength, and stationary phase all play a role in the overall efficiency and optimization of ion-pairing separations. This study investigates the role that competition between ion-pairing reagents with different steric bulk and hydrophobicity plays in the separation of structural isomers of heparin and heparan sulfate (HS) disaccharides. In addition to providing insights into the mechanism by which RPIP-HPLC can resolve closely related disaccharides, the use of competition between ion-pairing agents could lead to new methods for the separation of larger heparin and HS oligosaccharides. This approach should also be applicable to the analysis of other compound classes, and could lead to a general approach for the chromatographic resolution of mixtures of charged analytes having similar structures.     

Determination of arsenic species by capillary zone electrophoresis with large-volume field-amplified stacking injection.

Determination of arsenic species by large-volume field amplified stacking injection-capillary zone electrophoresis (LV-FASI-CZE) is reported in this paper. Whole column injection was employed. The optimum buffer pH for the separation of weak acids was discussed. It was found that the optimum buffer to analyze the stacked arsenate (As(V)), monomethylarsonate (MMA), and dimethylarsinate (DMA) was 25 mM phosphate at pH 6.5. However, the optimum buffer to analyze the concentrated arsenite (As(III)) was 20 mM phosphate - 10 mM borate at pH 9.28. The limits of detection of the method developed were 0.026 mg/L for As(III), 0.023 mg/L for As(V), 0.043 mg/L for MMA, and 0.018 mg/L for DMA. An enrichment factor of 34-100 for several arsenic species was obtained. In the end, this method was applied to determine the arsenic concentration in the environmental reference materials to show the usefulness of the method developed.     

The separation of dimethylarsinic acid,methylarsonous acid,methylarsonic acid,arsenate and dimethylarsinous acid on the Hamilton PRP‐X100 anion‐exchange column

In order to separate the potential arsenite metabolites methylarsonous acid and dimethylarsinous acid from arsenite, arsenate, methylarsonic acid and dimethylarsinic acid, the pH‐dependent retention behaviour of all six arsenic compounds was studied on a Hamilton PRP‐X100 anion‐exchange column with 30 mM phosphate buffers (pH 5, 6, 7, 8 and 9) containing 20% (v/v) methanol as mobile phase and employing an inductively coupled plasma atomic emission spectrometer (ICP–AES) as the arsenic‐specific detector. Baseline separation of dimethylarsinic acid, methylarsonous acid, methylarsonic acid, arsenate and dimethylarsinous acid was achieved with a 30 mmol dm⁻³ phosphate buffer (pH 5)–methanol mixture (80:20, v/v) in 25 min. Arsenite is not baseline‐separated from dimethylarsinic acid under these conditions. Copyright © 1999 John Wiley & Sons, Ltd.