CdTe量子点与罗丹明B间的荧光共振能量转移研究

以巯基乙酸为稳定剂, 在水溶液中合成了CdTe量子点. 以发射波长522 nm的量子点为给体, 罗丹明B为受体, 研究了在十六烷基三甲基溴化铵胶束介质中, 量子点与罗丹明B之间的荧光共振能量转移. 实验结果表明, 在pH＝5.00的缓冲溶液中, 当十六烷基三甲基溴化铵的浓度为1.37×10－4 mol/ L时, 量子点与罗丹明B之间的距离为2.65 nm, 1个量子点给体最多可与6个罗丹明B受体发生有效的共振能量转移, 能量转移效率为0.69.     

High‐Performance Förster Resonance Energy Transfer (FRET)‐Based Dye‐Sensitized Solar Cells: Rational Design of Quantum Dots for Wide Solar‐Spectrum Utilization

High‐performance Förster resonance energy transfer (FRET)‐based dye‐sensitized solar cells (DSSCs) have been successfully fabricated through the optimized design of a CdSe/CdS quantum‐dot (QD) donor and a dye acceptor. This simple approach enables quantum dots and dyes to simultaneously utilize the wide solar spectrum, thereby resulting in high conversion efficiency over a wide wavelength range. In addition, major parameters that affect the FRET interaction between donor and acceptor have been investigated including the fluorescent emission spectrum of QD, and the content of deposited QDs into the TiO₂ matrix. By judicious control of these parameters, the FRET interaction can be readily optimized for high photovoltaic performance. In addition, the as‐synthesized water‐soluble quantum dots were highly dispersed in a nanoporous TiO₂ matrix, thereby resulting in excellent contact between donors and acceptors. Importantly, high‐performance FRET‐based DSSCs can be prepared without any infrared (IR) dye synthetic procedures. This novel strategy offers great potential for applications of dye‐sensitized solar cells.     

Preparation of functionally Pegylated gold nanoparticles with narrow distribution through autoreduction of auric cation by alpha-biotinyl-PEG-block-[poly(2- (N,N-dimethylamino)ethyl methacrylate)

PEGylated gold nanoparticles with biotin moieties installed at the distal end of the PEG tethered chains were prepared by the autoreduction of HAuCl4 catalyzed by alpha-biotinyl-PEG-block-poly[2-(N,N-dimethylamino)ethyl methacrylate] (biotinyl-PEG/PAMA) in aqueous medium at room temperature. The size of the gold nanoparticles was controllable in a range of 6-13 nm by changing the initial Au3+/polymer ratio, while retaining their narrow size distribution. The dispersion stability of the nanoparticles in aqueous medium was extremely high even under the condition of salt concentration as high as I = 2.0. Biotinyl-PEG/PAMA-anchored gold nanoparticles underwent specific aggregation in the presence of streptavidin, revealing their promising utility as colloidal sensing systems applicable under biological condition.     

Studies on fluorenscence resonance energy transfer between CdS nanoparticles and DOCAI dyes

The water-soluble CdS nanoparticles were synthesized in aqueous solution. A novel fluorescence resonance energy transfer (FRET) system with CdS nanoparticles as energy donors and 3,30-diethyl-oxadicarbocyanine iodide (DOCAI) dyes as energy accepter has been developed.     

Quantum dots as simultaneous acceptors and donors in time-gated Förster resonance energy transfer relays: characterization and biosensing

The unique photophysical properties of semiconductor quantum dot (QD) bioconjugates offer many advantages for active sensing, imaging, and optical diagnostics. In particular, QDs have been widely adopted as either donors or acceptors in F?rster resonance energy transfer (FRET)-based assays and biosensors. Here, we expand their utility by demonstrating that QDs can function in a simultaneous role as acceptors and donors within time-gated FRET relays. To achieve this configuration, the QD was used as a central nanoplatform and coassembled with peptides or oligonucleotides that were labeled with either a long lifetime luminescent terbium(III) complex (Tb) or a fluorescent dye, Alexa Fluor 647 (A647). Within the FRET relay, the QD served as a critical intermediary where (1) an excited-state Tb donor transferred energy to the ground-state QD following a suitable microsecond delay and (2) the QD subsequently transferred that energy to an A647 acceptor. A detailed photophysical analysis was undertaken for each step of the FRET relay. The assembly of increasing ratios of Tb/QD was found to linearly increase the magnitude of the FRET-sensitized time-gated QD photoluminescence intensity. Importantly, the Tb was found to sensitize the subsequent QD-A647 donor-acceptor FRET pair without significantly affecting the intrinsic energy transfer efficiency within the second step in the relay. The utility of incorporating QDs into this type of time-gated energy transfer configuration was demonstrated in prototypical bioassays for monitoring protease activity and nucleic acid hybridization; the latter included a dual target format where each orthogonal FRET step transduced a separate binding event. Potential benefits of this time-gated FRET approach include: eliminating background fluorescence, accessing two approximately independent FRET mechanisms in a single QD-bioconjugate, and multiplexed biosensing based on spectrotemporal resolution of QD-FRET without requiring multiple colors of QD.     

Impact of FRET between Molecular Aggregates and Quantum Dots

Energy transfer has been employed in third‐generation solar cells for the conversion of light into electrical energy. Long‐range nonradiative energy transfer from semiconductor quantum dots (QDs) to fluorophores has been demonstrated by using CdS QDs and thiophene?BODIPY (boron dipyrromethene, abbreviated as TG2). TG2 shows a broad photoluminescence (PL) spectrum, which varies with concentration. At very low concentrations, monomeric units are present; then, upon increasing the concentration, these monomers form a mixed (J‐/H‐)aggregated state. Energy transfer between the CdS QDs and TG2 was confirmed by separately investigating the interactions between CdS and the monomer of TG2 and between CdS and the aggregated states of TG2. Size‐dependent PL quenching confirmed that nonradiative Förster resonance energy transfer (FRET) from photoexcited CdS QDs to the J‐aggregate state of TG2 was the major energy‐relaxation channel, which occurred on the timescale of hundreds of fs. These results have broad applications in the field of light harvesting based on the assembly of molecular aggregates.     

A hybrid quantum dot-antibody fragment fluorescence resonance energy transfer-based TNT sensor

We demonstrate the use of luminescent QDs conjugated to antibody fragments to develop solution-phase nanoscale sensing assemblies, based on fluorescence resonance energy transfer (FRET) for the specific detection of the explosive 2,4,6-trinitrotoluene (TNT) in aqueous environments. The hybrid sensor consists of anti-TNT specific antibody fragments attached to a hydrophilic QD via metal-affinity coordination. A dye-labeled TNT analogue prebound in the antibody binding site quenches the QD photoluminescence via proximity-induced FRET. Analysis of the data collected at increasing dye-labeled analogue to QD ratios provided an insight into understanding how the antibody fragments self-assemble on the QD. Addition of soluble TNT displaces the dye-labeled analogue, eliminating FRET and resulting in a concentration-dependent recovery of QD photoluminescence. Sensor performance and specificity were evaluated.     

Self-assembled donor comprising quantum dots and fluorescent proteins for long-range fluorescence resonance energy transfer

We report on the development of a self-assembled donor for long-range fluorescence resonance energy transfer (FRET). To this end, a three-chromophore FRET (3Ch-FRET) system was constructed, which consists of a luminescent quantum dot (QD), enhanced yellow fluorescent proteins (EYFP), and Atto647-dye-modified oligonucleotides. The system was assembled by electrostatic binding of covalent EYFP-ssDNA conjugate to the QD and subsequent hybridization with complementary oligonucleotides labeled with Atto647-dye. The final conjugates comprise three different two-chromophore FRET (2Ch-FRET) subsystems, QD/EYFP, QD/Atto647, and EYFP/Atto647, respectively, which were studied in detail by steady-state and time-resolved photoluminescence measurements. The helicity of DNA allowed us to control donor/acceptor separations and thus enabled the detailed analysis of the various FRET processes. We found that the 2Ch-FRET and the 3Ch-FRET (QD/EYFP/Atto647) systems revealed FRET efficiencies and transfer rates that were affected by the availability of distinct FRET pathways. The derived energy-transfer efficiencies and F?rster radii indicated that within the 3Ch-FRET system, the 2Ch-FRET subsystem QD/EYFP showed highest FRET efficiencies ranging from 64 to 72%. Thus, it can be used as a powerful donor system that combines the intrinsic advantages of QDs (large and spectrally broad absorption cross section) and EYFP (high quantum yield) and enables long-distance FRET processes for donor-acceptor distances of up to 13 nm.     

PEGylated BODIPY assembling fluorescent nanoparticles for photodynamic therapy

Two PEGylated BODIPY which could self-assemble into nanoparticles were synthesized via multicomponent Passerini reaction for cellular imaging and photodynamic therapy.     

CdS量子点与曙红Y间的荧光共振能量转移研究

在水溶液中,量子点与有机荧光染料之间可能发生荧光共振能量转移(FRET)。本文以发射波长470nm的Cd S量子点为供体,曙红Y为受体,建立了Cd S量子点-曙红Y的FRET体系,研究了该体系的FRET参数。该体系受体供体数目比为8,猝灭效率为45.6%,增强效率为20.1%;供体-受体间的距离为4.4nm;临界能量转移距离为2.4nm。     

The quenching of CdSe quantum dots photoluminescence by gold nanoparticles in solution

The photoluminescence (PL) of CdSe quantum dots (QD) in aqueous media has been studied in the presence of gold nanoparticles (NP) with different shapes. The steady state PL intensity of CdSe QD (1.5-2 nm in size) is quenched in the presence of gold NP. Picosecond bleach recovery and nanosecond time-resolved luminescence measurements show a faster bleach recovery and decrease in the lifetime of the emitting states of CdSe QD in the presence of quenchers. Surfactant-capped gold nanorods (NR) with aspect ratio of 3 and surfactant-capped and citrate-capped nanospheres (NS) of 12 nm diameter were used as quenchers in order to study the effect of shape and surface charge on the quenching rates. The Stern-Volmer kinetics model is used to examine the observed quenching behavior as a function of the quencher concentration. It was found that the quenching rate of NR is more than 1000 times stronger than that of NS with the same capping material. We also found that the quenching rate decreases as the length of the NR decreases, although the overlap between the CdSe emission and the NR absorption increases. This suggests that the quenching is a result of electron transfer rather than long-range (Forster-type) energy transfer processes. The quenching was attributed to the transfer of electron with energies below the Fermi level of gold to the trap holes of CdSe QD. The observed large difference between NR and NS quenching efficiencies was attributed to the presence of the [110] facets only in the NR, which have higher surface energy.     

Study on the fluorescence resonance energy transfer between CdTe QDs and butyl-rhodamine B in the presence of CTMAB and its application on the detection of Hg(II)

The thioglycolic acid-functionalized CdTe quantum dots (QDs) were synthesized in aqueous solution using safe and low-cost inorganic salts as precursors. Fluorescence resonance energy transfer (FRET) system was constructed between CdTe QDs (donor) and butyl-rhodamine B (BRB) (acceptor) in the presence of cetyltrimethylammonium bromide (CTMAB). CTMAB micelles formed in water reduced the distance between the donor and the acceptor significantly and thus improved the FRET efficiency, which resulted in an obvious fluorescence enhancement of the acceptor. Several factors which impacted the fluorescence spectra of the FRET system were studied. The energy transfer efficiency (E) and the distance (r) between CdTe and BRB were obtained. The feasibility of the prepared FRET system as fluorescence probe for detecting Hg(II) in aqueous solution was demonstrated. At pH 6.60, a linear relationship could be established between the quenched fluorescence intensity of BRB and the concentration of Hg(II) in the range of 0.0625-2.5mumolL(-1). The limit of detection was 20.3nmolL(-1). The developed method was proved to be sensitive and repeatable to detect Hg(II) in a wide range in aqueous solutions.     

Copolymer nanosphere encapsulated CdS quantum dots prepared by RAFT copolymerization: synthesis,characterization and mechanism of formation

Cadmium sulfide (CdS) quantum dots (QDs) encapsulated in block copolymer spheres were synthesized by an aqueous emulsion polymerization process. First, stable dispersions of CdS QDs in water were prepared using a polymer dispersant, either poly(acrylic acid) or a random copolymer having an average of ten acrylic acid and five butyl acrylate units. These polymer dispersants were prepared by reversible addition-fragmentation chain transfer polymerization. Then, the CdS QDs dispersed in water were encapsulated in a polystyrene shell using an emulsion polymerization process. Spectroscopic and microscopic techniques were used to characterize the resulting nanocomposites. Optical properties of QDs in polymer microspheres were investigated by UV-vis and fluorescence spectroscopic studies. Particle sizes of all CdS QD samples were calculated from absorption edges using Henglein's empirical curve. Transmission electron microscopy was used to determine the size and morphology of CdS QD samples. These observations were used to elucidate the mechanism of formation of the resulting well-defined polymer-encapsulated CdS nanoparticles.     

Quantum Dot Photoluminescence Quenching by Cr(III) Complexes. Photosensitized Reactions and Evidence for a FRET Mechanism

Reported are quantitative studies of the energy transfer from water-soluble CdSe/ZnS and CdSeS/ZnS core/shell quantum dots (QDs) to the Cr(III) complexes trans-Cr(N(4))(X)(2)(+) (N(4) is a tetraazamacrocycle ligand, X(-) is CN(-), Cl(-), or ONO(-)) in aqueous solution. Variation of N(4), of X(-), and of the QD size and composition allows one to probe the relationship between the emission/absorption overlap integral parameter and the efficiency of the quenching of the QD photoluminescence (PL) by the chromium(III) complexes. Steady-state studies of the QD PL in the presence of different concentrations of trans-Cr(N(4))(X)(2)(+) indicate a clear correlation between quenching efficiency and the overlap integral largely consistent with the predicted behavior of a F?rster resonance energy transfer (FRET)-type mechanism. PL lifetimes show analogous correlations, and these results demonstrate that spectral overlap is an important consideration when designing supramolecular systems that incorporate QDs as photosensitizers. In the latter context, we extend earlier studies demonstrating that the water-soluble CdSe/ZnS and CdSeS/ZnS QDs photosensitize nitric oxide release from the trans-Cr(cyclam)(ONO)(2)(+) cation (cyclam = 1,4,8,11-tetraazacyclotetradecane) and report the efficiency (quantum yield) for this process. An improved synthesis of ternary CdSeS core/shell QDs is also described.     

水相合成CdX (X＝Te, Te/CdS, Te/ZnS)红色量子点及毒性效应

分别以巯基乙酸(Mercaptoacetic Acid, MA)、还原型谷胱甘肽(Glutathione, GSH)为稳定剂在水相中直接合成了巯基乙酸CdTe (CdTe-MA)、红色巯基乙酸CdTe/CdS (CdTe/CdS-MA)、巯基乙酸CdTe/ZnS (CdTe/ZnS-MA)及谷胱甘肽CdTe (CdTe-GSH)量子点. 其中, CdTe-GSH量子点的量子产率可达47.3%. 体外溶血实验证实CdTe/ZnS-MA和CdTe-GSH量子点的溶血率较CdTe-MA和CdTe/CdS-MA低, 浓度为0.05 mmol/L的量子点溶血率＜5%, 达到了生物医用材料的要求. 活体实验证实: 通过尾静脉方式把量子点注入小鼠体内后, 荧光显微镜观察发现高剂量的量子点(0.4 mmol/10 g)在体内主要在心、肝、脾、肾组织中分布较多, 且引起不同程度的组织病变.     

Ratiometric arginine assay based on FRET between CdTe quantum dots and Cresyl violet

The authors report on the design of a new Förster resonance energy transfer (FRET) based ratiometric nanoprobe for the determination of arginine. The method is based on the inhibition of the efficiency of FRET in assemblies formed between CdTe quantum dots capped with mercaptopropionic acid (QD-MPA) acting as energy donor, and the dye Cresyl Violet (CV) that acts as an energy acceptor at pH 8. Addition of arginine causes a displacement of the CV by arginine on the surface of the QD/MPA. Hence, the FRET between QD/MPA and CV is interrupted and fluorescence emission of the donor (QD/MPA) is restored. Arginine selectively binds to the QD/MPA via electrostatic and hydrogen bonding interactions between guanidinium and carboxylate. Under optimum conditions, the ratio of the fluorescence emissions peaking at 575 and 620 nm (under 400 nm excitation) is linear in the 1 to 30 μM arginine concentration range, and the detection limit is 0.51 μM. The nanoprobe displays good selectivity over 14 other amino acids, many metal ions, glucose, and ascorbic, tartaric and citric acids. The fluorescent nanoprobe was successfully applied to the determination of arginine in pure and spiked real samples and gave good recoveries. Its good selectivity, sensitivity, low-cost and rapidity make the QD-dye assembly a suitable nanoprobe for the quantitation of arginine.

Open image in new window

Graphical abstract Schematic of a FRET ratiometric nanoprobe for arginine. It is based on quantum dots acting as energy donors and Cresyl Violet acting as energy acceptor. The FRET process is interrupted by the addition of arginine which selectively interacts with carboxy groups via a guanidinium-carboxylate salt bridge.

     

Completely dispersible PEGylated gold nanoparticles under physiological conditions: modification of gold nanoparticles with precisely controlled PEG-b-polyamine

A novel water-soluble, biocompatible polymer, poly(ethylene glycol)-block-poly((2-N,N-dimethylamino)ethyl methacrylate) (PEG-b-PAMA), possessing controlled molecular weight with a narrow molecular weight distribution, was synthesized by the atom-transfer radical polymerization (ATRP) method. PEG-b-PAMA having a short PAMA chain length was successfully synthesized under suitable polymerization conditions. Gold nanoparticles (GNPs) were modified using PEG-b-PAMA prepared under a variety of PEGylation conditions. Under alkaline conditions (pH >10) and an [N]/[GNP] ratio of more than 3300, the PEGylated GNPs (PEG-GNPs) showed complete dispersion stability, avoiding coagulation. The amino groups of the PAMA segment of the block copolymers were completely deprotonated above pH 10. This means that PEG-b-PAMA interacted with the GNP surface via multipoint coordination of the tertiary amino groups of PAMA, not electrostatically. The effect of the number of amino groups in the PAMA segment on GNP surface modifications was investigated by zeta potential and dynamic light scattering (DLS) measurements. When the PEG-GNPs were prepared in excess polymer solution, almost the same diameter was observed regardless of the PAMA chain length. After the PEG-GNPs were purified by centrifugation, the zeta potentials of all PEG-GNPs were shielded to almost 0 mV, indicating the effective modifications of the GNP surface by PEG-b-PAMA regardless of the chain length. However, the particle size and particle size distribution of the purified PEG-GNPs were strongly affected by the PAMA chain length. PEG-GNPs with longer PAMA segments underwent coagulation after purification, whereas PEG-GNPs with shorter PAMA segments increased their dispersion stability. The experimental results of the thermal gravimetric analysis confirmed that the PEG density on the GNP surface increased as the AMA units decreased to 3. Thus, the dispersion stability depended significantly on the PEG density on the GNP surface. GNPs modified with PEG-b-PAMA having short AMA units showed excellent dispersion stability under a variety of pH conditions. The excellent dispersion stability of the obtained PEG-GNP was also confirmed both in bovine serum albumin (BSA) solution and 95% human serum.     

Fluorescence quenching of CdS quantum dots by 4-azetidinyl-7-nitrobenz-2-oxa-1,3-diazole: a mechanistic study

Fluorescence quenching of CdS quantum dots (QDs) by 4‐azetidinyl‐7‐nitrobenz‐2‐oxa‐1,3‐diazole (NBD), where the two quenching partners satisfy the spectral overlap criterion necessary for Förster resonance energy transfer (FRET), is studied by steady‐state and time‐resolved fluorescence techniques. The fluorescence quenching of the QDs is accompanied by an enhancement of the acceptor fluorescence and a reduction of the average fluorescence lifetime of the donor. Even though these observations are suggestive of a dynamic energy transfer process, it is shown that the quenching actually proceeds through a static interaction between the quenching partners and is probably mediated by charge‐transfer interactions. The bimolecular quenching rate constant estimated from the Stern–Volmer plot of the fluorescence intensities, is found to be exceptionally high and unrealistic for the dynamic quenching process. Hence, a kinetic model is employed for the estimation of actual quencher/QD ratio dependent exciton quenching rate constants of the fluorescence quenching of CdS by NBD. The present results point to the need for a deeper analysis of the experimental quenching data to avoid erroneous conclusions.     

Chemical degradation of poly(2-aminoethyl methacrylate)

Poly(2-aminoethyl methacrylate) (PAMA) has a pK_a of approximately 7.6 and is chemically stable in acidic or neutral aqueous solution in its protonated form. However, chemical degradation of PAMA is known to occur in alkaline media as its primary amine groups become deprotonated (He L et al. Macromolecules 2007; 40: 4429-38). In the present work, the effect of temperature, pH and polymer concentration on the rate of PAMA degradation in dilute aqueous solution has been examined. ¹H NMR spectroscopy indicates that both elimination of 2-aminoethanol and formation of 2-hydroxyethyl methacrylamide repeat units occur above pH 9; elimination is observed first and occurs to a greater extent. FT-IR studies of aqueous PAMA solutions aged at pH 12 and 50 °C confirm the presence of anionic carboxylate groups, which suggests that such elimination is simply due to ester hydrolysis. A control experiment suggests that methacrylamide formation occurs via internal rearrangement, rather than by amidation of the remaining ester groups by the eliminated 2-aminoethanol.     

Fluorescence resonance energy transfer between quantum dot donors and dye-labeled protein acceptors

We used luminescent CdSe-ZnS core-shell quantum dots (QDs) as energy donors in fluorescent resonance energy transfer (FRET) assays. Engineered maltose binding protein (MBP) appended with an oligohistidine tail and labeled with an acceptor dye (Cy3) was immobilized on the nanocrystals via a noncovalent self-assembly scheme. This configuration allowed accurate control of the donor-acceptor separation distance to a range smaller than 100 A and provided a good model system to explore FRET phenomena in QD-protein-dye conjugates. This QD-MBP conjugate presents two advantages: (1) it permits one to tune the degree of spectral overlap between donor and acceptor and (2) provides a unique configuration where a single donor can interact with several acceptors simultaneously. The FRET signal was measured for these complexes as a function of both degree of spectral overlap and fraction of dye-labeled proteins in the QD conjugate. Data showed that substantial acceptor signals were measured upon conjugate formation, indicating efficient nonradiative exciton transfer between QD donors and dye-labeled protein acceptors. FRET efficiency can be controlled either by tuning the QD photoemission or by adjusting the number of dye-labeled proteins immobilized on the QD center. Results showed a clear dependence of the efficiency on the spectral overlap between the QD donor and dye acceptor. Apparent donor-acceptor distances were determined from efficiency measurements and corresponding F?rster distances, and these results agreed with QD bioconjugate dimensions extracted from structural data and core size variations among QD populations.