Immobilization of tetraphenylporphyn and its metallocomplexes on the surface of plasma-treated polypropylene

The immobilization of 5,10,15,20-tetraphenylporphyn and its zinc and manganese complexes on the surface of polypropylene modified by plasmachemical treatment and subsequent grafting copolymerization of acrylamide or 4-vinylpyridine has been studied by multiple attenuated total reflection FTIR spectroscopy, electronic absorption spectroscopy, and atomic force microscopy. It has been demonstrated that the immobilized molecules of tetraphenylporphyn and its metallocomplexes are active in the photosensitized generation of singlet oxygen to the gas phase.     

Analysis of functional groups on the surface of plasma-treated carbon nanofibers

Plasma chemically modified carbon nanofibers were characterized by X-ray photoelectron spectroscopy with regard to the content of carbon, oxygen, and nitrogen and the contribution of carboxylic groups or ester, carbonyl and hydroxylic groups or ether on the surface. Unfortunately, X-ray photoelectron spectroscopy only provides an average value of the first 10 to 15 molecular layers. For comparison, depth profiles were measured and wet chemical methods were applied to estimate the thickness of the functionalized layer and the distribution of oxygen-containing functional groups within the near-surface layers. The results indicate that the fiber surface is covered by a monomolecular oxygen-containing layer and that plasma treatment allows a complete oxygen functionalization of the uppermost surface layer. The best conditions for plasma treatment found within the set of parameters applied to generate complete functionalization are: plasma gas O(2)/Ar ratio 1:1, gas pressure 1-1.5 hPa, plasma power 80 W, treatment time >or= 5 min. Additionally, three quick and easy methods are presented to estimate the efficiency of plasma treatment with regard to surface functionalization: pyrolysis, contact angle measurements, and light permeability measurements of aqueous carbon nanofiber suspensions.     

Vascular endothelial and smooth muscle cell culture on NaOH-treated poly(epsilon-caprolactone) films: a preliminary study for vascular graft development

Tissue engineering offers the potential of providing vessels that can be used to replace diseased and damaged native blood vessels. The endothelization of a synthetic vascular graft minimizes the failures associated with blood clotting and platelet activation. The aim of this study was to culture vascular-derived endothelial and smooth muscle cells on both untreated and NaOH-treated poly(epsilon-caprolactone) (PCL) films, a biocompatible and bio-resorbable polymer, and to evaluate the behavior of both cell types as a preliminary study for vascular graft development. PCL films were prepared by hot pressing; characterized by DSC, IR, SEM, and scanning force microscopy; and treated with NaOH to increase the surface hydrophilicity before cell culture. Endothelial and smooth muscle cells, isolated from pig cava vein, were characterized by immunofluorescence and confocal microscopy studies of endothelial nitric oxide synthase and alpha-smooth muscle actin. Good adhesion, growth, viability and morphology of both the endothelial and smooth muscle cells on PCL films were obtained, but a light stimulation of mitochondrial activity was observed during short culture times. NaOH treatment improved the adhesion and enhanced the proliferation in both cell types. This verified the possible use of this modified polymer as a support in the preparation of a synthetic vascular graft. [Diagram: see text] SEM micrograph of smooth muscle cells cultured on NaOH-treated PCL film. (Original magnification: 1000x).     

The extracellular matrix and the control of proliferation of vascular endothelial and vascular smooth muscle cells

In this short review we describe the observations which have led us to conclude that one of the most important components involved in modulating cell proliferation in vitro, and probably in vivo as well, may be the extra-cellular matrix upon which cells rest.     

Detecting cells on the surface of a silver electrode quartz crystal microbalance using plasma treatment and graft polymerization

This paper utilizes a silver electrode quartz crystal microbalance (QCM) mass sensor to detect the physiology of cells. This study also investigates the plasma surface modification of silver electrode QCMs through deposition of hexamethyldisilazane (HMDSZ) films as a protection film. To improve the cell growth, this paper also performs post-treatments by surface-grafting acrylic acid (AAc), acrylamide (AAm), and oxygen plasma treatment onto the QCM electrodes. Experimental results indicate that plasma deposition is a useful technique to protect the surface of silver electrodes. This technique extends the unpeeling time of silver electrodes from 1 to 7 days. The hydrophilic silver electrode QCM surface modified by AAm exhibited a better storage time effect than other post-treatments.     

Effect of ageing atmospheres on the changes in surface free energies of oxygen plasma-treated polyethylene films

The changes in the surface properties of oxygen plasma-treated polyethylene films during ageing in various atmospheres (water, dry nitrogen gas, and hexane) were studied from the viewpoint of the interaction of the surface functional groups formed on the films and the ageing media. The XPS (x-ray photoelectron spectroscopy) and the SSIMS (static secondary ion mass spectrometry) spectra indicated the formation of polar groups containing oxygen such as C=O on the film surface. The changes in the critical surface tension (_C) of the film with ageing time were largely affected by the ageing atmospheres: the _C value of the film aged in water increased, and those of the films aged in nitrogen gas and hexane decreased with an increase in ageing time. These different tendencies among the ageing media could be understood reasonably with examining the surface free energy ratios (the total energy, _S ^tot , the dispersion force component, _S ^d / _S ^tot , the polar component, _S ^p / _S ^tot , the hydrogen bonding component, _S ^h / _S ^tot ) of the films. The ageing in water of which _L is large gave the films with higher _S ^p / _S ^tot values, suggeting that the overturn and/or the orientation of the polar groups toward the water phase occurred so as to minimize the discrepancy of the surface free energy between the polymer surface and water. On the other hand, the ageing in nitrogen gas and hexane media of which _L are small gave the films with lower _S ^p / _S ^tot and _S ^h / _S ^tot values, suggesting the overturn and/or the orientation of the polar groups into the bulk polymer.     

Investigation on the effects of diamide on NO production in vascular endothelial cells (VEC)

Nitric oxide (NO) controls several physiological functions of the cardiovascular system. The study on the effect of diamide (N₂H₄·H₂O) on NO production in vascular endothelial cells (VEC) may provide significant reference for VEC’s modeling in studying cardiovascular diseases. The objective of this study was to elucidate how high concentration diamide (V_diamide/V_{culture miedium}=5 ml/l) and low concentration diamide (V_diamide/V_{culture miedium}=0.5 ml/l) affect NO production in a human endothelial cell line (ECV304). After cells were incubated with diamide (5 or 0.5 ml/l) for 4, 6, 8 or 10 h, respectively, the amounts of NO metabolites released by the cells were quantitated and the degree of damage of VEC was observed using microscope. The results showed that NO production in VEC tended to decrease with the lapse of time in the 0.5 ml/l diamide group. In the 5 ml/l diamide group, on the contrary, NO production in VEC tended to increase with the lapse of time. At the same time, from the morphologic observation, the VEC were damaged severely after treated with 5ml/l diamide. So it could be concluded that the severe damage induced by high concentration diamide would have triggered the express of inducible nitric oxide synthases (iNOS). Just for the expresssion of iNOS, NO production in VEC treated with high concentration diamide occurred abnormally in contrast to the 0.5 ml/l group.     

Effect of honeycomb-patterned surface topography on the adhesion and signal transduction of porcine aortic endothelial cells

Surface topography has vital roles in cellular response. Here, to investigate the mechanism behind cellular response to surface topography, we prepared honeycomb (HC)-patterned films from poly(epsilon-caprolactone) (PCL) with micropatterned surface topography by casting a polymer solution of water-immiscible solvent under high humidity. We characterized the adsorption of fibronectin (Fn) on the film using atomic force microscopy (AFM) and confocal laser scanning microscopy (CLSM). The response of porcine aortic endothelial cells (PAECs) to adsorbed Fn molecules onto HC-patterned films was observed by immunofluorescence labeling of vinculin and the actin fiber of PAECs cultured for 1 and 72 h in serum-free medium. The expression of focal adhesion kinase autophosphorylated at the tyrosine residue (pFAK) at 1 h culture was determined using an immunoprecipitation method. Fn adsorbed selectively around the pore edges to form ring-shaped aggregates. The immunostaining results revealed that PAECs adhered to the HC-patterned films at focal contact points localized around pore peripheries. These points correspond to adsorption sites of Fn. The expression of pFAK after 1 h on the HC-patterned film was 3 times higher than that on a corresponding flat film, indicating that the signaling mediated by the binding between Fn and the integrin receptor was more highly activated on the HC-patterned film. These results suggest that the cellular response to HC-patterned films (e.g., adhesion pattern and phosphorylation of FAK) originates from the regularly aligned adsorption pattern of Fn determined by the pore structure of the film.     

Effects of 5-aminolaevulinic acid on human ovarian cancer cells and human vascular endothelial cells in vitro.

Results are reported on the cellular effects and the sensitivity of cultured tumor epithelial cells (TEC) derived from human ovarian cystadenocarcinoma and human umbilical vein-derived endothelial cells (HUVEC) to exogenous 5-aminolaevulinic acid (ALA) and ALA-induced photodynamic therapy (PDT). Cellular alterations and PDT efficiency were evaluated using colorimetric thiazolyl blue (MTT) assay, trypan blue exclusion assay, electron microscopy, and gel electrophoresis. ALA-induced protoporphyrin IX (PpIX) accumulation in TEC was associated with a concentration and time-dependent significant decrease in mitochondrial activity, increase in cell membrane permeability, and dark toxicity. Maximum PpIX loaded TEC demonstrated a high sensitivity to PDT. Neither cellular alterations nor PDT effects were observed in HUVEC under identical experimental conditions. These results indicate a potential clinical value for the use of ALA-mediated PDT to treat minimal residual disease in mucinous ovarian carcinoma. In addition, the ALA-induced PpIX cytotoxicity may be exported to a new chemotherapeutic regimen via a conventionally viewed photochemotherapeutic agent.     

Kinetic study on the elastic change of vascular endothelial cells on collagen matrices by atomic force microscopy

The elasticity of vascular endothelial cells (HUVEC) was measured with an atomic force microscopy (AFM, Olympus), and analyzed by applying the Hertz model, and those data were compared with ones reported by us previously. The latter elasticity data were measured with AFM Instruments (Seiko) on the basis of the Young's modulus of gelatin gel, which was obtained from the measurement with a tensile tester. The elasticity of HUVEC was concluded to depend on the culture period. The elasticity of the cells cultured on type IV collagen for longer than 4 days led to average elasticity values higher than ca. 10(4)Pa. Moreover, the scattered values of elasticity decreased eminently in the AFM measurement of the cells at room temperature. A few cells, however, appeared to adhere long and tensely on matrix, which seems to one of reasons for relatively high elasticity in our previous works. The possibility of such high elasticity was considered to change in cell adhesion, anchoring on matrix during a long culture period.     

Electrochemical characterization of the surface of a small particle and nonequilibrium electric surface phenomena

By investigating the effects that originate from nonequilibrium double layer states, it is possible to discriminate between two types of surfaces respectively corresponding and not corresponding to the standard electrokinetic model (SEM). This goal is accomplished by measuring the induced dipole moment (i.d.m.) of a particle, which enables one to determine the specific surface conductivity κ^σ, mobile charge σ_m and efficient Stern potential Ψ_ef. Porous or rough surfaces are quite abundant, but they do not correspond to SEM which implies that Ψ_ef exceeds ζ. Since ion adsorption and the stability ratio depend exponentially on Ψ_ef, substitution of the ζ potential for Ψ_ef in these exponents results in a very large error if Ψ_ef is high. The investigation of particles with a porous or a rough surface or with an anomalous conductivity confined to Stern layer ions can be quantified through integrated measurements of the nonequilibrium electric surface phenomena (NESP) used in conjunction with the extension of DLVO theory over this more complicated type of surface.NESP which are used for measurement of κ^σ are characterized and experiments are discussed which have confirmed the correctness of the theory of NESP and of the procedure for κ^σ, σ_m and Ψ_d calculation and determination of the ζ-potential under polarization conditions. A comparative evaluation of the high- and low-frequency as well as of the stationary complexes of NESP measurements is carried out, and their advantages and disadvantages are shown as they reveal themselves in electrochemical characterization. The unsuitability of the Henry-Booth equation for the interpretation of low-frequency or stationary NESP is demonstrated as well as its apparent agreement with experiment and the complete inconsistency in the case of the nonstandard model. The software, which provides a correct extraction of information about the surface of a spherical particle from data of combined electric surface investigations of real disperse systems whose particles are usually polydisperse and do not correspond to SEM, is discussed. Attention is paid to efficient methods for measuring the i.d.m. κ^σ and Ψ_ef of a nonspherical particle, based on the anisotropy of conduction and on the electro-optic phenomena.The nonlinearity of high-voltage electrophoresis caused by surface diffusion of the adsorbed ions is predicted and described. It is proposed to use this new effect for studying the dynamic Stern layer and for measuring the adsorbed ion diffusivity. Such investigations are especially important for studying the electrostatic interaction of colloid particles which has a strong effect on the kinetics of slow coagulation according to studies made by Lyklema and Dukhin. Within the framework of the Lyklema-Klein model, the effect of gel layers on the electrostatic interaction of particles is considered and on this basis the importance is shown of identification of charged gel layers and of their electrochemical characterization.     

Strong adhesion and smooth conductive surface via graft polymerization of aniline on a modified glass fiber surface

The goal of this paper is to prepare surface-conductive glass fibers. The fibers were first hydroxylated, after which they were reacted with 3-bromopropyltrichlorosilane to form a bromopropylsilane monolayer, which was further reacted with aniline to substitute the bromine atoms. The surface-bound aniline molecules were used as active sites for the graft polymerization of polyaniline (PANI). The composition, structure and the morphology of the modified glass fiber surface were examined by X-ray photoelectron spectroscopy, scanning electron microscopy, and Fourier transform infrared spectroscopy. The method generated a smooth and homogenous thin layer of PANI on the surface of the glass fiber with a surface conductivity of about 6 S/cm, hence larger than the usual value ( approximately 1 S/cm) of the bulk polyaniline.     

Titanium oxo-clusters: precursors for a Lego-like construction of nanostructured hybrid materials

Titanium oxo-clusters, well-defined monodispersed nano-objects, are appropriate nano-building blocks for the preparation of organic-inorganic materials by a bottom up approach. This critical review proposes to present the different structures of titanium oxo-clusters referenced in the literature and the different strategies followed to build up hybrid materials with these versatile building units. In particular, this critical review cites and reports on the most important papers in the literature, concentrating on recent developments in the field of synthesis, characterization, and the use of titanium oxo-clusters for the construction of advanced hybrid materials (137 references).     

Organic-inorganic hybrid nanoparticles: surface characteristics and interactions with a polyester resin

Organic-inorganic hybrid nanoparticles, derived from silica precursors with different organic functionalities (methyl, ethyl, vinyl, and phenyl) synthesized via a modified St?ber method have been investigated. These particles are intended as modifiers for polymers and polymer matrix composites. Therefore, the characteristics of a polyester matrix have also been determined, and the likely interactions with the particles have been proposed. Particles have been characterized using inverse gas chromatography (IGC), X-ray photoelectron spectroscopy (XPS), and infrared spectroscopy (FT-IR). The particles show two different sets of characteristics, with methyl, ethyl, and vinyl modified silicas showing one type of behavior and the phenyl modified silica behaving rather differently. The methyl, ethyl, and vinyl groups exhibit the appearance of uniform coverage, as they are comparatively small and tightly packed, which will prevent interaction of matrix resin with retained silanol groups. The phenyl group, which is comparatively large, is not able to pack as closely, which results in a reduction of the presence and availability of silanol groups, compared to an unmodified fumed silica, but not complete inaccessibility as far as the matrix resin is concerned.     

The influence of polyelectrolyte charges of polyurethane membrane surface on the growth of human endothelial cells

A novel technique to introduce free amino groups onto polyester scaffolds via aminolyzing the ester groups with diamine has been developed recently. The introduction of the free amino groups on these polyester surfaces provides us the possibility to modify polymer surface in a simpler manner, e.g. layer-by-layer assembly of charged species. By this technique, many negatively and positively charged biopolymers were deposited alternatively on polyurethane surface. The deposition process was monitored by fluorescence spectroscopy and advancing contact angle measurements. The result of human endothelial cells cultured in vitro showed that cells on negatively charged surface could not spread and flatten well due to the electrostatic repulsion. The lower attachment ratio induced the lower proliferation ratio. However, after the surface charge was inversed by collagen, both attachment and proliferation ratios increased to different extent. Observed under SEM, cells also presented a flat and spreading morphology.     

In situ determination of the thermodynamic surface properties of chemically modified surfaces on a local scale: an attempt with the atomic force microscope

We have monitored deflection-distance curves with an atomic force microscope (AFM) in contact mode, with a silicon nitride tip, on chemically modified silicon wafers, in the air. The wafers were modified on their surface by grafting self-assembled monolayers (SAMs) of different functional groups such as methyl, ester, amine, or methyl fluoride. A chemically modified surface with a functionalized hydroxyl group was also considered. Qualitative analysis allowed us to compare adhesive forces versus chemical features and surface energy. The systematic calibration procedure of the AFM measurements was performed to produce quantitative data. Our results show that the experimentally determined adhesive force or thermodynamic work of adhesion increases linearly with the total surface energy determined with contact angles measured with different liquids. The influence of capillary condensation of atmospheric water vapor at the tip-sample interface on the measured forces is discussed. Quantitative assessment values were used to determine in situ the SAM-tip thermodynamic work of adhesion on a local scale, which have been found to be in good agreement with quoted values. Finally, the determination of the surface energy of the silicon wafer deduced from the thermodynamic work of adhesion is also proposed and compared with the theoretical value.     

Formation of small rhodium metal particles on the surface of a carbon support

A rhodium catalyst supported on a Sibunit graphitized carbon carrier was studied by in situ XAFS spectroscopy. A comparative study of the reduction of rhodium was performed for the following two samples: Rh/C(120) dried at 120°C and Rh/C(350) calcined at 350°C. EXAFS data showed an absence of carbon atoms within the nearest environment of rhodium atoms in the Rh/C(120) uncalcined sample, which implies the absence of direct interaction between rhodium and the carbon support. In the course of the reduction of this sample (200°C), coarse particles with small metal cores were initially formed. These metal particles rapidly agglomerated upon the complete reduction of rhodium (350°C). These reduction of the Rh/C(350) calcined sample at 100–500°C resulted in the formation of small metal particles early in the reduction (100°C). The high dispersity of these particles was retained as the temperature of treatment in hydrogen was increased to 500°C due to metal-support interaction. The conversion of benzene into cyclohexane on the Rh/C(350) catalyst containing small rhodium particles was much higher at the same temperature of hydrogenation.Translated from Kinetika i Kataliz, Vol. 46, No. 1, 2005, pp. 122–130. Original Russian Text Copyright © 2005 by Stakheev, Tkachenko, Klementev, Grünert, Bragina, Mashkovskii, Kustov.     

Investigation of the effect of tanshinone IIA on nitric oxide production in human vascular endothelial cells by fluorescence imaging

Nitric oxide (NO) has been proved to be a potent vasodilator that played an important role in regulating vascular tones. Tanshinone, one of the active components of Radix Salvia miltiorrhiza, was used widely in clinics in China for treating cardiovascular diseases. The objective of this study was to sensitively and specifically investigate the effects of tanshinone IIA, one important pharmacological constituent of tanshinone, on the release of NO from human vascular endothelial cells (HVECs) by fluorescence imaging with an excellent fluorescent probe 1,3,5,7-tetramethyl-2,6-dicarbethoxy-8-(3',4'-diaminophenyl)-difluoroboradiaza-s-indacence (TMDCDABODIPY). After cells were incubated with tanshinone IIA, TMDCDABODIPY was employed to label NO. Following the tagging, real-time imaging of NO release from the cells was performed with inverted fluorescence microscope. The results of the experiments showed that tanshinone IIA could induce NO production significantly enhanced in HVECs. The activation of NO by tanshinone IIA may be employed therapeutically in modulating NO production in HVECs.     

An atomic-force microscopy study of the formation of vinyl and acryl graft polymers on a polypropylene film surface

Changes in the surface structure of oriented polypropylene (PP) films in conditions of graft copolymerization of acrylamide, vinylpyridine, and styrene on a PP surface preliminary subjected to plasmochemical activation in oxygen plasma or in a plasma-electrolyte solution system are investigated by atomic-force microscopy. It is shown that the latter soft conditions of activation are superior to the hard conditions with oxygen plasma in retaining original lamellar structure of oriented PP films. It is established that the subsequent graft copolymerization of the vinyl and acryl monomers on the PP surface yields amorphous phases of respective polymers.