Spinel, YbFe2O4, and Yb2Fe3O7 types of structures for compounds in the In2O3 and Sc2O3---A2O3---BO systems [A: Fe, Ga, or Al; B: Mg, Mn, Fe, Ni, Cu, or Zn] at temperatures over 1000°C

In the Sc₂O₃---Ga₂O₃---CuO, Sc₂O₃---Ga₂O₃---ZnO, and Sc₂O₃---Al₂O₃---CuO systems, ScGaCuO₄, ScGaZnO₄, and ScAlCuO₄ with the YbFe₂O₄-type structure and Sc₂Ga₂CuO₇ with the Yb₂Fe₃O₇-type structure were obtained. In the In₂O₃---A₂O₃---BO systems (A: Fe, Ga, or Al; B: Mg, Mn, Fe, Ni, or Zn), InGaFeO₄, InGaNiO₄, and InFe³⁺MgO₄ with the spinel structure, InGaZnO₄, InGaMgO₄, and InAlCuO₄ with the YbFe₂O₄-type structure, and In₂Ga₂MnO₇ and In₂Ga₂ZnO₇ with the Yb₂Fe₃O₇-type structure were obtained. InGaMnO₄ and InFe₂O₄ had both the YbFe₂O₄-type and spinel-type structures. The revised classification for the crystal structures of AB₂O₄ compounds is presented, based upon the coordination numbers of constituent A and B cations.     

Synthese und Eigenschaften teilsilylierter Tri- und Tetraphosphane. Reaktionen lithiierter Diphosphane mit Chlorphosphanen

Synthesis and Properties of Partially Silylated Tri- and Tetraphosphanes. Reaction of Lithiated Diphosphanes with Chlorophosphanes The reactions of Li(Me₃Si)P? P(SiMe₃)(CMe₃) 1 , Li(Me₃Si)P? P(CMe₃)₂ 2 , and Li(Me₃C)P? P(SiMe₃)(CMe₃) 3 with the chlorophosphanes P(SiMe₃)(CMe₃)Cl, P(CMe₃)₂Cl, or P(CMe₃)Cl₂ generate the triphosphanes [(Me₃C)(Me₃Si)P]₂P(SiMe₃) 4 , (Me₃C)(Me₃Si)P? P(SiMe₃)? P(CMe₃)₂ 6 , [(Me₃C)₂P]₂P(SiMe₃) 7 , and (Me₃C)(Me₃Si)P? P(SiMe₃)? P(CMe₃)Cl 8 . The triphosphane (Me₃C)₂P? P(SiMe₃)? P(SiMe₃)₂ 5 is not obtainable as easily. The access to 5 starts by reacting PCl₃ with P(SiMe₃)(CMe₃)₂, forming (Me₃C)₂ P? PCl₂, which then with LiP(SiMe₃)₂ gives (Me₃C)₂ P? P(Cl)? P(SiMe₃)₂ 11 . Treating 11 with LiCMe₃ generates (Me₃C)₂P? P(H)? P(SiMe₃)₂ 16 , which can be lithiated by LiBu to give (Me₃C)₂P? P(Li)? P(SiMe₃)₂ 13 and after reacting with Me₃SiCl, finally yields 5 . 8 is stable at ?70°C and undergoes cyclization to P₃(SiMe₃)(CMe₃)₂ in the course of warming to ambient temperature, while Me₃SiCl is split off. 7 , reacting with MeOH, forms [(Me₃C)₂P]₂PH. (Me₃C)₂P? P(Li)? P(SiMe₃)₂ 18 , which can be obtained by the reaction of 5 with LiBu, decomposes forming (Me₃C)₂P? P(Li)(SiMe₃), P(SiMe₃)₃, and LiP(SiMe₃)₂, in contrast to either (Me₃C)₂P? P(Li)? P(SiMe₃)(CMe₃) 19 or [(Me₃C)₂P]₂PLi, which are stable in ether solutions. The Li phosphides 1 , 2 , and 3 with BrH₂C? CH₂Br form the n-tetraphosphanes (Me₃C)(Me₃Si)P? [P(SiMe₃)]₂? P(SiMe₃)(CMe₃) 23 , (Me₃C)₂P? [P(SiMe₃)]₂? P(CMe₃)₂ 24 , and (Me₃C)(Me₃Si)P? [P(CMe₃)]₂? P(SiMe₃)(CMe₃) 25 , respectively. Li(Me₃Si)P? P(SiMe₃)₂, likewise, generates (Me₃Si)₂P? [P(SiMe₃)]₂? P(SiMe₃)₂ 26 . Just as the n-triphosphanes 4 , 5 , 6 , and 7 , the n-tetraphosphanes 23 , 24 , and 25 can be isolated as crystalline compounds. 23 , treated with LiBu, does nor form any stable n-tetraphosphides, whereas 24 yields (Me₃C)₂P? P(Li)? P(SiMe₃)? P(CMe₃)₂, that is stable in ethers. With MeOH, 24 , forms crystals of (Me₃C)₂P? P(H)? P(SiMe₃)? P(CMe₃)₂.     

On precipitation effects of aluminum,lanthanum, iron (III), and thorium phosphates

Summary Typical precipitation curves of various metal phosphates have been obtained using the turbidimetric technique. The following systems have been investigated: Al(NO₃)₃-K₃PO₄, Al(NO₃)₃-KH₂PO₄, Al(NO₃)₃NaH₂PO₄, FeCl₃-K₃PO₄, FeCl₃-(NH₄)₂HPO₄, FeCl₃K₂HPO₄, FeCl₃-KH₂PO₄, FeCl₃-NaH₂PO₄, La(NO₃)₃K₃PO₄,La(NO₃)₃-K₂HPO₄,La(NO₃)₃-KH₂PO₄,La(NO₃)₃NaH₂PO₄ and Th(NO₃)₄-K₂HPO₄. Typical precipitation curves indicated concentration ranges of phosphate precipitation and of complex solubility.

---

Zusammenfassung Typische F?llungskurven verschiedener Metallphosphate, die mittels Trübungsmessungen erhalten wurden, wurden graphisch dargestellt. Die folgenden Systeme wurden untersucht: Al(NO₃)₃-K₃PO₄,Al(NO₃)₃KH₂PO₄, Al(NO₃)₃-NaH₂PO₄, FeCl₃-K₃PO₄, FeCl₃(NH₄)₂HPO₄, FeCl₃-K₂HPO₄, FeCl₃-KH₂PO₄, FeCl₃NaH₂PO₄, La(NO₃)₃-K₃PO₄, La(NO₃)₃-K₂HPO₄, La(NO₃)₃-KH₂PO₄, La(NO₃)₃-NaH₂PO₄ und Th(NO₃)₄K₂HPO₄. Typische F?llungskurven zeigten Konzentrationsgebiete, in welchen die Metallphosphate gef?llt werden, sowie Konzentrationen, die zur Komplexbildung führten.

---

---

Supported in part by the U.S. Army Research Office, Contract No. DA-ORD-10.     

Metallation studies of organofunctional trisiloxanes

Summary The organofunctional trisiloxanes Me₃SiOSiMe(R)OSiMe₃ [R=(CH₂)₂PPh₂, (CH₂)₃C₅H₄N, (CH₂)₃CN, (CH₂)₂Ph, (CH₂)₂SPh, CH=CH₂ and CH₂CH=CH₂] have been reacted with metal halide and-carbonyl moieties in order to determine the coordination preferences of materials being used as models for metallated longchain linear functionalised polysiloxanes. The products [Me₃SiOSiMe(R)OSiMe₃]₃ML_n [R=(CH₂)₂PPh₂, ML_n=RhCl],cis-[Me₃SiOSiMe(R)OSiMe₃]₂ML_n [R=(CH₂)₂PPh₂ or (CH₂)₃C₅H₄N, ML_n=Mo(CO)₄],trans-[Me₃SiOSiMe(R)OSiMe₃]₂ML_n[R=(CH₂)₂PPh₂, ML_n=NiCl₂, PdCl₂, PtCl₂ and [Rh(CO)Cl] and [Me₃SiOSiMe(R)OSiMe₃]ML_n [R=(CH₂)₂PPh₂, ML_n=Mo(CO)₃(2,2-bipyridine); R=(CH₂)₂Ph, ML_n=Mo(CO)₃; R=(CH₂)₃C₅H₄N, (CH₂)₃CN, or (CH₂)₂SPh, ML_n=Rh(CO)₂Cl; R=CH=CH₂ or CH₂CH=CH₂, ML_n=Fe(CO)₄] have been isolated and characterised spectroscopically in the course of these studies.     

Transmetallation reactions involving phenylenemercurials

When heated with Group V and Group VI elements, the phenylenemercurials (C₆H₄Hg)₃, (C₆F₄Hg)₃ and (C₆Cl₄Hg)₃ form heterocycles of formulae (M₂(C₆X₄)₃ and M′₂(C₆X₄)₂ where M = As, Sb, Bi and M′ = S, Se, Te. The compounds Te₂(C₆Cl₄)₂ and M₂(C₆Cl₄)₃ (M = As, Sb, Bi) were also obtained by heating the elements with 1,2-I₂C₆Cl₄, which was prepared by mercuration of 1,2-H₂C₆Cl₄ followed by iododemercuration. Octachlorothianthrene has been obtained by heating sulphur with Te₂(C₆Cl₄)₂, C₆Cl₆ or C₆Cl₅I, and from the reaction between 1,2-H₂C₆Cl₄, AlCl₃, and S₂Cl₂.     

Reactivity in The Solid State Between Ag2S and Ag2CrO4

Reactivity, in the solid state between Ag₂S and Ag₂CrO₄, was investigated by DTA, XRD and IR methods. It was found that, according to a composition of an initial Ag₂S/Ag₂CrO₄ mixture, the products of a reaction of Ag₂S with Ag₂ CrO₄ can be: solid solution with Ag₂CrO₄ structure (Ag₂Cr_1–xS_xO₄) and AgCrO₂; or solid solution Ag₂Cr_1–xS_xO₄, Ag₂SO₄, AgCrO₂ and metallic silver; or Ag₂S, β-Ag₈S₄O₄, Ag, AgCrO₂, Ag₂SO₄ and Ag₂Cr_1–xS_xO₄ solid solution. This revised version was published online in July 2006 with corrections to the Cover Date.     

Oxalate-2-ethanolamine complexes of some bivalent cations (Mn,Co, Ni,Cu, Zn and Cd)

On the refluxing ofM(II) oxalate (M=Mn, Co, Ni, Cu, Zn or Cd) and 2-ethanolamine in chloroform, the following complexes were obtained: MnC₂O₄·HOCH₂CH₂NH₂·H₂O, CoC₂O₄·2HOCH₂CH₂NH₂, Ni₂(C₂O₄)₂·5HOCH₂CH₂NH₂·3H₂O, Cu₂(C₂O₄)₂·5HOCH₂CH₂NH₂, Zn₂(C₂O₄)₂·5HOCH₂CH₂NH₂·2H₂O and Cd₂(C₂O₄)₂·HOCH₂CH₂NH₂·2H₂O. Following the reaction ofM(II) oxalate with 2-ethanolamine in the presence of ethanolammonium oxalate, a compound with the empirical formula ZnC₂O₄·HOCH₂CH₂NH₂·2H₂O¹ was isolated. The complexes were identified by using elemental analysis, X-ray powder diffraction patterns, IR spectra, and thermogravimetric and differential thermal analysis. The IR spectra and X-ray powder diffraction patterns showed that the complexes obtained were not isostructural. Their thermal decompositions, in the temperature interval between 20 and about 900°C, also take place in different ways, mainly through the formation of different amine complexes. The DTA curves exhibit a number of thermal effects.     

Tartrate der TypenLn 2(H2 T)3·xH2O undLnH5 T 2·xH2O einiger Seltenerdmetalle

The following compounds were isolated and more closely studied by means of thermal analysis, X-ray scattering and IR absorption spectra and determination of solubilities: Pr₂(H₂ T)₃ · 6 H₂O, Nd₂(H₂ T)₃ · 6 H₂O, Sm₂(H₂ T)₃ · 5 H₂O, Gd₂(H₂ T)₃ · 5 H₂O, Tb₂(H₂ T)₃ · 5 H₂O, Dy₂(H₂ T)₃ · 5 H₂O, Ho₂(H₂ T)₃ · 5 H₂O, Er₂(H₂ T)₃ · 5 H₂O, PrH₅ T ₂ · 2 H₂O, NdH₅ T ₂ · 2 H₂O, SmH₅ T ₂ · 2 H₂O, GdH₅ T ₂ · 3 H₂O, TbH₅ T ₂ · 3 H₂O, DyH₅ T ₂ · 3 H₂O, HoH₅ T ₂ · 3 H₂O, ErH₅ T ₂ · 3 H₂O.     

Mass spectra of organometallic compounds—VII; Organonitrogen derivatives of metal carbonyls

The positive-ion mass spectra of the following organonitrogen derivatives of metal carbonyls are discussed: (i) The compounds NC₅H₄CH₂Fe(CO)₂C₅H₅, NC₅H₄CH₂COMo(CO)₂C₅H₅, NC₅H₄CH₂W(CO)₃C₅H₅, NC₅H₄CH₂COMn(CO)₄, C₅H₁₀NCH₂CH₂Fe(CO)₂C₅H₅, (CH₃)₂NCH₂CH₂COFeCOC₅H₅ and (CH₃)₂NCH₂CH₂COMn(CO)₄ obtained from metal carbonyl anions and haloalkylamines, (ii) The isocyanate derivative C₅H₅Mo(CO)₃CH₂NCO; (iii) The arylazomolybdenum derivatives RN₂Mo(CO)₂C₅H₅ (R ? phenyl, p-tolyl, or p-anisyl); (iv) The compound (C₆H₅N)₂COFe₂(CO)₆ obtained from Fe₃(CO)₁₂ and phenyl isocyanate; (v) The N,N,N′,N′-tetramethylethylenediamine complex (CH₃)₂NCH₂CH₂N(CH₃)₂W(CO)₄. Further examples of eliminations of hydrogen, CO, and C₂H₂ fragments were noted. In addition evidence for the following more unusual processes was obtained: (i) Elimination of HCN fragments from the ions [NC₅H₄CH₂MC₅H₅]⁺ to give the ions [(C₅H₅)₂M]⁺ (M ? Fe, Mo and W); (ii) Conversion of C₅H₅Mo(CO)₃CH₂NCO to C₅H₅Mo(CO)₂CH₂NCO within the mass spectrometer; (iii) Elimination of N₂ from [RN₂MoC₅H₅]⁺ to give [RMoC₅H₅]⁺; (iv) Novel eliminations of HNCO, FeNCO, and C₆H₅NC fragments in the mass spectrum of (C₆H₅N)₂COFe₂(CO)₆; (v) Facile dehydrogenation of the N,N,N′,-N′-tetramethylethylenediamine ligand in the complex (CH₃)₂NCH₂CH₂N(CH₃)₂W(CO)₄.     

Ternäre Halogenide der Seltenen Erden vom Typ A2MX5 (A = K,In, NH4, Rb,Cs; X = Cl,Br, I)

Ternary Rare-Earth Halides of the A₂MX₅ Type (A = K, In, NH₄, Rb, Cs; X = Cl, Br, I) Ternary rare-earth (=M) chlorides, bromides, and iodides In₂MCl₅, (NH₄)₂MCl₅, Rb₂MCl₅, Cs₂MCl₅, CsRbMCl₅, K₂MBr₅, Rb₂MBr₅, K₂MI₅, and Rb₂MI₅ have been synthesized. Single crystals of In₂PrCl₅, Rb₂PrCl₅, K₂PrBr₅, and K₂PrI₅ were grown and the structures refined. The other halides were characterized by x-ray powder patterns. They are isotypic either with K₂PrCl₅(orthorhombic, Pnma, Z = 4, hexagonal arrangement of chains of edge-connected polyhedra [PrX₇]) or with Cs₂DyCl₅ (orthorhombic, Pbnm, Z = 4, hexagonal arrangement of cis-corner-connected octahedra [DyCl₆]) which may be discriminated in structure field diagrams. The thermal expansion was investigated für Cs₂LuCl₅ and Rb₂PrX₅ (X = Cl, Br, I).     

New Perspectives in Polyoxometalate Chemistry by isolation of compounds containing very large moieties as transferable building blocks: (NMe4)5[As2Mo8V4AsO40] · 3H2O, (NH4)21[H3Mo57V6(NO)6O183(H2O)18] · 65 H2O, (NH2Me2)18(NH4)6[Mo57V6(NO)6O183(H2O)18] · 14 H2O,and (NH4)12[Mo36(NO)4O108(H2O)16] · 33 H2O

The compounds (NMe₄)₅[As₂Mo₈V₄AsO₄₀] · 3 H₂O 2a , (NH₄)₂₁[H₃Mo₅₇V₆(NO)₆O₁₈₃(H₂O)₁₈] · 65 H₂O 3a , (NH₂Me₂)₁₈(NH₄)₆[Mo₅₇V₆(NO)₆O₁₈₃(H₂O)₁₈] · 14 H₂O 3b and (NH₄)₁₂[Mo₃₆(NO)₄O₁₀₈(H₂O)₁₆] · 33 H₂O 4a ( 3a and 4a were not correctly reported in the literature regarding to their composition, structures and the oxidation states of the metal centres) which contain large isolated anionic species, have been prepared (among them 3a, 3b , and 4a in rather high yield) and characterized by complete crystal structure analysis as well as IR/Raman, UV/VIS/NIR, ESR spectroscopy and magnetic susceptibility measurements, redox titrations, bond valence sum calculations, elemental analyses and thermogravimetric studies. Perspectives for polyoxometalate chemistry referring to the synthesis of “extremely” large nanoscaled species are discussed, together with the occurrence of a large transferable {Mo₁₇} building block in the compounds 3a, 3b and 4a which also exists in the corresponding iron compound Na₃(NH₄)₁₂[H₁₅Mo₅₇Fe₆(NO)₆O₁₈₃(H₂O)₁₈] · 76 H₂O 7a .     

Dimethylphosphinato and dimethylarsinato complexes of Sb(III) and Bi(III) and their chemistry

Abstract  

The reaction of Me₂PO₂H and Me₂AsO₂H with SbCl₃, BiCl₃, and Bi(NO₃)₃·5H₂O gave the complexes Sb(Me₂PO₂)₃, Sb(Me₂AsO₂)₃, (Me₂PO₂)₂Bi-Cl, Bi(Me₂AsO₂)₃, (Me₂PO₂)₂Bi(NO₃), and (Me₂AsO₂)₂Bi(NO₃)·H₂O, respectively. The arsinato complexes did not react with the Lewis bases pyridine, Ph₃P, and Ph₃As in acetone. The compounds Sb(Me₂AsO₂)₃ and (Me₂AsO₂)₂Bi(NO₃)·H₂O reacted to a small extent with nicotinic acid in methanol but Bi(Me₂AsO₂)₃ gave (Me₂AsO₂-BiO) _x in good yields. (Me₂AsO₂)₂Bi(NO₃)·H₂O in methanol quantitatively rearranged to new complexes with the same composition, [(Me₂AsO₂)₂Bi(NO₃)·H₂O]′ and [(Me₂AsO₂)₂Bi(NO₃)·H₂O]″ in the presence of pyridine. With thiophenol in air, Sb(Me₂AsO₂)₃ gave PhSSPh and Me₂As-SPh (1:1 mol ratio), (Me₂AsO₂-SbO) _x and some Sb(Me₂AsO₂)₃ was reformed, Bi(Me₂AsO₂)₃ gave (Me₂AsO₂-BiO) _x , PhSSPh, and Me₂As-SPh (1:0.6 mol ratio), whereas (Me₂AsO₂)₂Bi(NO₃)·H₂O quantitatively gave PhSSPh, thus acting as a catalyst for the air oxidation of thiophenol.     

Equilibrium phase behavior of aqueous two-phase systems containing 17R4/L64 and citrates

The cloud points (CPs) of the copolymers 17R4 and L64 were first measured, and then the effects of salts ((NH₄)₃C₆H₅O₇, K₃C₆H₅O₇) on 17R4 and L64 were researched. After finishing the work described above, the temperature (278.15, 283.15, and 288.15) K of aqueous two-phase systems was determined, which consist of 17R4-(NH₄)₃C₆H₅O₇, 17R4-K₃C₆H₅O₇, L64-(NH₄)₃C₆H₅O₇, and L64-K₃C₆H₅O₇. Finally, the liquid–liquid equilibrium (LLE) data of binodal curve and the tie line for 17R4-(NH₄)₃C₆H₅O₇ aqueous two- phase systems (ATPSs) 17R4-K₃C₆H₅O₇ ATPSs, L64-(NH₄)₃C₆H₅O₇ ATPSs, and L64-K₃C₆H₅O₇ ATPSs were obtained. Nonlinear fitting of the empirical equation was used for making the diagram. The results showed that the change in the size of the two-phase areas increases with the increase of temperature. The capacity of the salts to induce phase segregation follows the Hofmeister series, that is, K₃C₆H₅O₇?>?(NH₄)₃C₆H₅O₇. In addition, the findings also showed that the phase separation ability of 17R4 is better than that of L64.     

Synthesis of formamidines from 2-amino-3-methylquinazolin-4-one and its 6-nitro derivative

The condensation of 2-amino-3-methylquinazolin-4-one and its 6-nitro derivative with dialkyl-, arylalkyl-, and heterylformamides has given the corresponding formamidines of the quinazolinone series. The details of the compounds synthesized are as follows X, R, R′, yield (%), mp (°C, ethanol), R_f (chloroform-methanol (20:1) Al₂O₃): empirical formula: H, CH₃, CH₃, 77, 238–240, 0.49, C₁₂H₁₄ON₄; H, C₂H₅, C₂H₅, 65, 208–210, 0.96, C₁₄H₁₈ON₄; H, CH₃, C₆H₅, 84, 162–164, 0.54, C₁₇H₁₆ON₄; H, (CH₂)₂O(CH₂)₂, 60, 196–197, 0.43, C₁₄H₁₆O₂N₄; H, (CH₂)₅, 6.6, 196–198, 0.4, C₁₅H₁₈·ON₄; NO₂, CH₃, CH₃, 64. 194–196, 0.83, C₁₂H₁₃O₃N₅; NO₂, C₂H₅, C₂H₅, 37, 142–144, 0.8, C₁₄H₁₇O₃N₅; NO₂; CH₃, C₆H₅, 38, 298, 0.88, C₁₇H₁₅O₃N₅; NO₂, (CH₂)₂O(CH₂)₂, 60, 148–150, 0.7, C₁₄H₁₅O₄N₅. Institute of the Chemistry of Plant Substances, Academy of Sciences of the Uzbek SSR, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 680–684, September–October, 1980.     

Alternativ-Liganden. III. Koordinatives verhalten von chelatliganden des typs me2XSi(Me2)CH2XMe2 (X  N und/oder P: Me  CH3)

Co-ordinative Properties of Chelating Ligands of the Type Me₂XSi(Me₂)CH₂XMe₂ (X ? N and/or P; Me ? CH₃) The reactions of the ligands L ? Me₂XSi(Me₂)CH₂XMe₂ (X ? N and/or P; Me ? CH₃) with M(CO)₆ and M(CO)₄norbor (norbor ? norbornadiene) (M ? Cr, Mo), respectively, yield derivatives of the types M(CO)₅L, M(CO)₄L, and M(CO)₄L₂, respectively. M(CO)₅L compounds are formed from the hexacarbonyls with Me₂NSiMe₂CH₂PMe₂, whereas the ligand Me₂NSiMe₂CH₂NMe₂ does not afford analogous derivatives under the same conditions. Even on substitution of the diene-ligand in M(CO)₄norbor by Me₂NSiMe₂CH₂PMe₂ the chelate complexes M(CO)₄NMe₂SiMe₂CH₂PMe₂ are not obtained, but the cis-disubstituted products M(CO)₄[PMe₂CH₂SiMe₂NMe₂]₂ with phosphorus acting as donor atom are produced. The ligands Me₂PSiMe₂CH₂XMe₂(X ? N, P) give the chelate complexes M(CO)₄PMe₂SiMe₂CH₂XMe₂ in high yields. The new compounds were identified by analytical and spectroscopic (PMR, IR, mass spectra) methods.     

Reactions of the nitrate radical with a series of reduced organic sulphur compounds in air

A 480 L evacuable reaction chamber, equipped with FT-IR spectroscopy on-line and ion chromatography off-line, has been used to study the gas phase reaction between the nitrate radical, NO₃, and the reduced organic sulphur compounds CH₃CH₂SH, (CH₃CH₂)₂S, (CH₃CH₂)₂S₂, and CH₃CH₂SCH₃ in air. The products CH₃CH₂SO₃H, SO₂, H₂SO₄, CH₃CHO, and CH₃CH₂ONO₂ were identified and quantified in the reactions of the first three compounds, CH₃CH₂SH, (CH₃CH₂)₂S, and (CH₃CH₂)₂S₂. The reaction products were CH₃CH₂SO₃H, CH₃SO₃H, SO₂, H₂SO₄, CH₃CHO, and CH₂O in the reaction of CH₃CH₂SCH₃. On the basis of identified reaction products and intermediates observed in the infrared spectra, mechanisms are proposed for the reactions between the NO₃ radical and the four reduced organic sulphur compounds. The results of this study, together with those from previous experiments performed in this laboratory on CH₃SCH₃, CH₃SH, and CH₃SSCH₃ lead to the conclusion that all these species, in the reaction with the NO₃ radical, follow a similar degradation mechanism producing SO₂, H₂SO₄, R? SO₃H, R? CHO, and R? CH₂ONO₂, as the main reaction products. The inital step of the reaction of NO₃ with R? S? R and R? S? H type (R = CH₃, CH₂CH₃) reduced organic sulphur compounds was found to be H-atom abstraction, probably after the formation of an initial adduct. For the reaction between NO₃ and R? S? S? R type compounds, evidence for an addition-decomposition reaction, as the initial steps, was obtained. R? S·, R? S(O)·, and R? S(O)₂· appear to be formed as intermediates in all the reactions. © John Wiley & Sons, Inc.     

Synthesis and characterization of organotin complexes with dithiocarbamates and crystal structures of (4‐NCC6H4CH2)2Sn(S2CNEt2)2 and (2‐ClC6H4CH2)2 Sn(Cl)S2CNBz2

Ten organotin derivatives with dithiocarbamates of the formulae (4‐NCC₆H₄CH₂)₂Sn(S₂CNEt₂)₂ (1), (4‐NCC₆H₄CH₂)₂Sn(S₂CNBz₂)₂ (2), (4‐NCC₆H₄CH₂)₂Sn[S₂CN(CH₂CH₂)₂NCH₃]₂ (3), (2‐ClC₆H₄CH₂)₂ Sn(S₂CNEt₂)₂ (4), (2‐ClC₆H₄CH₂)₂Sn(S₂CNBz₂)₂ (5), (4‐NCC₆H₄CH₂)₂Sn(Cl)S₂CNEt₂ (6), (4‐NCC₆H₄CH₂)₂Sn(Cl)S₂CNBz₂ (7), (4‐NCC₆H₄CH₂)₂Sn(Cl)S₂CN(CH₂CH₂)₂NCH₃ (8), (2‐ClC₆H₄CH₂)₂ Sn(Cl)S₂CNEt₂ (9) and (2‐ClC₆H₄CH₂)₂Sn(Cl)S₂CNBz₂ (10) have been prepared. All complexes were characterized by elemental analyses, IR and NMR. The crystal structures of complexes 1 and 10 were determined by X‐ray single crystal diffraction. For complex 1, the central tin atom exists in a skew‐trapezoidal planar geometry defined by two asymmetrically coordinated dithiocarbamate ligands and two 4‐cyanobenzyl groups. In addition, because of the presence of close intermolecular non‐bonded contacts, complex 1 is a weakly‐bridged dimer. In complex 10, the central tin atom is rendered pentacoordinated in a distorted trigonal bipyramidal configuration by coordinating with S atoms derived from the dithiocarbamate ligand. In vitro assays for cytotoxicity against five human tumor cell lines (MCF‐7, EVSA‐T, WiDr, IGROV and M226) furnished the significant toxicities of the title complexes. Copyright © 2006 John Wiley & Sons, Ltd.     

Thiobromokomplexe von Arsen und Antimon Darstellung und Kristallstrukturen von (PPh4)2[As2SBr6] · CH2Br2 und (PPh4)2[Sb2SBr6] · CH2Br2

Thiobromo Complexes of Arsenic and Antimony. Preparation and Crystal Structures of (PPh₄)₂[As₂SBr₆] · CH₂Br₂ and (PPh₄)₂[Sb₂SBr₆] · CH₂Br₂ (PPh₄)₂[As₂SBr₆] · CH₂Br₂ is formed by the reaction of As₂S₃, PPh₄I and HI in dibromomethane. It can also be obtained, as well as (PPh₄)₂[Sb₂SBr₆] · CH₂Br₂, from (PPh₄)₂[As₂Br₈] and (PPh₄)₃[Sb₂Br₉], respectively, with bistrimethylsilylsulfide. The crystal structures of the title compounds were determined by X-ray diffraction. They are isotypic with (PPh₄)₂[As₂SCl₆] · C₂H₄Cl₂. In the anions [M₂SBr₆]^2? the M atoms (As or Sb) have a distorted octahedral coordination, the two octahedra share acommon face with one bridging S and two Br atoms; the lone electron pairs occupy the trans positions to the S atom. Crystal data: triclinic, space group P1 , Z = 2; (PPh₄)₂[As₂SBr₆] · CH₂Br₂, a = 119.1, b = 1203.6, c = 2067.5 pm α= 94.89, β = 97.78, γ = 112.20°, 3046 independent observed reflexions, R = 0.083; (PPh₄)₂[Sb₂SBr₆] · CH₂Br₂, a = 1198.9, b = 1224.3, c = 2085.5pm, α = 95.04, β = 98.48, γ = 112.13°C, 2380 reflexions, R = 0.079.     

New Phosphides with Transition and Rare-Earth Metals and Their Crystal Structures

Abstract

The interaction between components in systems M-M′- P (M -Zr, Hf, Nb, Mo, W, Mn, Re; M′-V, Cr, Fe, Co, Ni, Cu), Ln-{Fe, Co, Ni, Cu}-P (Ln-rare-earth metals) and M-{Si, B}-P (M-Cr, Mo, W, Mn, Re, Co, Ni, Cu) have been investigated and isotermal sections for 47 ternary systems have been built. 98 new phosphides have been synthesized and the crystal structure for 76 has been determined. The structures of new compounds belong to the known structure types, such as MgCu₂, Mg₆ Cu₁₆ Si₇, TiNiSi, Zr₂ Fe₁₂P₇, Hf₂ CO₄ P₃, CeAl₂ Ga₂, ZrFe₄Si₂, Nb₄ CoSi, Mo₅ SiB₂, MgZn₂, HfCuSi₂. The structures of several phosphides represent the new types: Nb₂P, α-Ni₈P₃, Zr₂Ni_l-xP, Tb,_1?xNiP, SmNi₄P₂, Nd₃Ni₇P₅, Ni₃,₃₆Si₁,₇₆P₆, Mo₂Ni₆P₃, Re_0,6, Ni_0,4P · The obtained experimental data allowed us to make the following conclusions:     

Synthesis and biological evaluation of novel indoleamide derivatives as antioxidative and antitumor agents

Novel indole amide derivatives C1-C10 were successfully synthesized and characterized by ¹H NMR, ¹³C NMR, IR, MS, and elemental analysis, and their molecular formulas were C₁₄H₁₀N₆O, C₁₃H₁₀N₄O, C₁₆H₁₃N₃O₂, C₁₉H₁₄N₂O₂, C₁₆H₁₁N₃OS, C₁₅H₁₃N₃O, C₁₂H₉N₅O, C₁₆H₁₀ClN₃OS, C₁₅H₁₇N₃O₂, and C₁₃H₁₄N₂O₃, respectively. The primary biological activities of these compounds were evaluated in vitro by the DPPH assay, H₂O₂-induced oxidative stress injury assay, and cytotoxicity assay. The results indicated that compounds C1, C2, C4, C7, and C9 exhibited DPPH·scavenging ability, while C3, C4, C5, and C8 showed potent growth-inhibitory activities against various human tumor cells, including MDA-MB-231, Hela, A549, and HT29. Interestingly, compound C4 showed potent scavenging effects on the DPPH radical and possessed protective effect on H₂O₂-induced oxidative stress injury in human neuroblastoma SH-SY5Y cells at low concentrations; however, C4 exhibited significant toxicity against four human tumor cells at a higher concentration in all treatments, and the range of IC₅₀ value was 7.91 to 13.35 μM.