Analytical Expressions for the Mixed-Order Kinetics Parameters of TL Glow Peaks Based on the two Heating Rates Method

The two heating rates method (originally developed for first-order glow peaks) was used for the first time to evaluate the activation energy (E) from glow peaks obeying mixed-order (MO) kinetics. The derived expression for E has an insignificant additional term (on the scale of a few meV) when compared with the first-order case. Hence, the original expression for E using the two heating rates method can be used with excellent accuracy in the case of MO glow peaks. In addition, we derived a simple analytical expression for the MO parameter. The present procedure has the advantage that the MO parameter can now be evaluated using analytical expression instead of using the graphical representation between the geometrical factor and the MO parameter as given by the existing peak shape methods. The applicability of the derived expressions for real samples was demonstrated for the glow curve of Li₂B₄O₇:Mn single crystal. The obtained parameters compare very well with those obtained by glow curve fitting and with the available published data.     

Anomalous thermal stability of metastable C<Subscript>20</Subscript> fullerene

The results of computer simulation of the dynamics of fullerene C₂₀ at different temperatures are presented. It is shown that, although it is metastable, this isomer is very stable with respect to the transition to a lower energy configuration and retains its chemical structure under heating to very high temperatures, T ≈ 3000 K. Its decay activation energy is found to be E _a ≈ 7 eV. Possible decay channels are studied, and the height of the minimum potential barrier to decay is determined to be U = 5.0 eV. The results obtained make it possible to understand the reasons for the anomalous stability of fullerene C₂₀ under normal conditions.     

Heat capacity of PMN near an electric-field-induced phase transition

The heat capacity of a single crystal of Pb(Mg_1/3Nb_2/3)O₃ (PMN) in an electric filed with E = 3 kV/cm applied along the [111] direction has been measured using adiabatic calorimetry over the temperature range 170–250 K. Anomalies in C _p have been found, which correspond to a field-induced phase transition from a relaxor to a ferroelectric state at 225 K under field cooling conditions or at 235–240 K on the subsequent field heating. The field-induced ferroelectric phase persists in a metastable state at low temperatures and is destroyed on zero-field heating at 210 K. The small entropy change ΔS = 0.028R in the field-induced phase transition suggests an insignificant change in the volume fraction of existing polar nanoregions.     

Phase transition in a KPb<Subscript>2</Subscript>Br<Subscript>5</Subscript> crystal

Crystals of the KPb₂Br₅compound are investigated using polarized light microscopy and calorimetry. The birefringence and the angle of rotation of the optical indicatrix are measured in the temperature range 270–620 K. It is found that the KPb₂Br₅ crystal undergoes a first-order ferroelastic phase transition at temperatures T_0↑ = 519.5 K and T_0↓ = 518.5 K with a change in the enthalpy ΔH = 1300 ± 200 J/mol. This transition is accompanied by both twinning and the symmetry change mmm ? P2₁/c. It is revealed that the angle of rotation of the optical indicatrix exhibits an unusual behavior under variations in the temperature due to a strong temperature dependence of the birefringence.     

Fine Structure of Beta Decay Strength Function and Anisotropy of Isovector Nuclear Dencity Component Oscillations in Deformed Nuclei

The experimental measurement data on the fine structure of beta-decay strength function S_β(E) in spherical, transitional, and deformed nuclei are analyzed. Modern high-resolution nuclear spectroscopy methods made it possible to identify the splitting of peaks in S_β(E) for deformed nuclei. By analogy with splitting of the peak of E1 giant dipole resonance (GDR) in deformed nuclei, the peaks in S_β(E) are split into two components from the axial nuclear deformation. In this report, the fine structure of S_β(E) is discussed. Splitting of the peaks connected with the oscillations of neutrons against protons (E1GDR), of proton holes against neutrons (peaks in S_β(E) of β⁺/EC-decay), and of protons against neutron holes (peaks in S_β(E) of β^–-decay) is discussed.     

Energy spectra of secondary particles in γ families and their sensitivity to the spectrum of primary cosmic rays

Spectra of secondary particles (γ-rays) in γ-families detected in the X-ray chambers in the Pamirs (H = 600 g cm^?2) have been analyzed. These γ-ray spectra show a bend at the energy E* _γ ≈ (ΣE _γ )^min, where (ΣE _γ )^min is the lowest total energy of γ-rays in the families above which γ-families were selected. The bend is not related to the knee in the spectrum of primary particles; it is due to the use of the ΣE _γ selection criterion. The E _γ spectrum slope is sensitive to the spectrum of the primary cosmic rays in the region E _γ ≥ (ΣE _γ )^min.     

Structure,Ferroelectric, and Magnetoelectric Properties of Bulk PZT–NiFe<Subscript>1.9</Subscript>Co<Subscript>0.02</Subscript>О<Subscript>4 – δ</Subscript> Composites

The phase composition, microstructure, and dielectric, ferroelectric, magnetic, and magnetoelectric properties of bulk ceramic (1 – x)PZT–xNiFe_1.9Co_0.02О_{4 – δ} composites with 3–0 connectivity have been studied. Using X-ray diffraction and electron microscopy, it has been established that the ferrimagnetic (spinel- like) and ferroelectric (tetragonal perovskite-like) phases separately exist in the composites of all compositions. The simultaneous existence of ferroelectric and ferrimagnetic properties in the composites is confirmed by measuring their P(E) and σ(B) hysteresis loops and studying the temperature dependences of dielectric and magnetic properties. The synthesized composites have high magnetoelectric characteristics: their voltage coefficient at x = 0.4 is 215 mV/A at a frequency of 1 kHz and 130 V/A at an electromechanical resonance frequency of 380 kHz.     

Fluorescence induction changes in bean leaves after heat treatment

The regularities in the alterations of chlorophyll a fluorescence induction curves of bean leaves after short (15 min) heating in the range of temperatures from 24 to 45°C were determined. A dramatic decrease in the relative f luorescence quenching (F_P–F_T)/F_T, as well as the F_v/_Fm ratio, were observed after heating at temperatures above 38°C, which indicates a decrease in the photochemical activity of photosystem II. The effect of an increase in the resistance of the photosynthetic apparatus to the temperature of 43°C after preheating at 37°C was demonstrated.     

Thermal annealing effect on structural and optical properties of 2,9-Bis [2-(4-chlorophenyl)ethyl] anthrax [2,1,9-def:6,5,10-d′e′f′] diisoquinoline-1,3,8,10 (2H,9H) tetrone (Ch-diisoQ) thin films

Thin films of 2,9-Bis [2-(4-chlorophenyl)ethyl] anthrax [2,1,9-def:6,5,10-d′e′f′] diisoquinoline-1,3,8,10 (2H,9H) tetrone (Ch-diisoQ) were prepared by thermal evaporation technique. Structural properties of these (as-prepared and annealed at 373, 423, 473 and 523 K) films were determined by X-ray diffraction and scanning electron microscopy, which showed that the grain sizes increasing by the annealing effect. The transmittance and reflectance of all Ch-diisoQ thin films were measured in the range 200–2500 nm. Some optical constants such as optical band gap (E _g ), dispersion energy (E _d ), single oscillator energy (E _o ) and optical dielectric constant at a higher frequency (ε _∞ ) were calculated at different annealing temperatures. The optical band gap of the samples is decreased with the increase of annealing temperatures due to the increasing of the π-dislocation. Finally, the values of the optical susceptibility, χ⁽³⁾, were found to be annealing dependence.     

On the effect of heating and cooling rates on the melting and crystallization of metal nanoclusters

The effect of heating and cooling rates on melting (T_m) and crystallization (T_c) temperatures of metal nanoclusters is investigated in terms of the isothermal molecular dynamics. We report on the results obtained for nickel nanoclusters, although analogous results were also obtained for gold and aluminum nanoclusters. It is found that T_m increases, while T_c decreases with increasing heating and cooling rates, both T_m and T_c tending to the same value for heating and cooling rates tending to zero. The results indicate that the hysteresis of melting and crystallization of nanoparticles must be completely due to nonequilibrium conditions of heating and cooling. The transition of Ni nanoclusters to the amorphous state begins at very high cooling rates exceeding 10 TK/s.     

Thermodynamic characteristics of the thermal polymerization of perfluoropropylvinyl ether at high pressures

The limiting polymerization temperatures of PFPVE at pressures 5.28–10.56 kbar (T _c = 200°C at 7.04 kbar and T _c = 240°C at 10.56 kbar) are measured. The volume of reaction ΔV and enthalpy of polymerization ΔH are determined.     

Effect of γ irradiation on the thermochromic phase transition in [(C<Subscript>2</Subscript>H<Subscript>5</Subscript>)<Subscript>2</Subscript>NH<Subscript>2</Subscript>]<Subscript>2</Subscript>CuCl<Subscript>4</Subscript> crystals (as derived from heat capacity measurements)

The heat capacity of [(C₂H₅)₂NH₂]₂CuCl₄ crystals, both nonirradiated and γ-irradiated to a dose of 10⁷R, was studied in the temperature interval 90–330 K by adiabatic calorimetry. The temperature dependence of C_p(T) was found to have a peak-shaped anomaly in the region of the thermochromic phase transition (PT) at T = 322.7 K. Smoothened experimental heat capacity data were used to calculate the changes in the thermodynamic functions. The changes in the entropy and enthalpy of the thermochromic PT were determined to be ΔS = 42 J K^?1 mol^?1 and ΔH = 13653 J mol^?1 for the nonirradiated crystals and ΔS = 39 J K^?1 mol^?1 and ΔH = 12120 J mol^?1 for the irradiated crystals, respectively. Irradiation of a [(C₂H₅)₂NH₂]₂CuCl₄ crystal by γ rays to a dose of 10⁷ R was shown to shift the PT point toward lower temperatures by ΔT ≈ 1.7 K.     

Effect of phase transitions on the exciton absorption spectrum of Rb<Subscript>x</Subscript>K<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Ag<Subscript>4</Subscript>I<Subscript>5</Subscript> superionic conductors

The absorption spectrum of thin films of solid solutions of Rb_xK_1?xAg₄I₅ superionic conductors is investigated in the energy range 3–6 eV at temperatures from 90 to 290 K upon heating and cooling. It is established that the temperature dependences of the spectral position E _m and the half-width Γ of the long-wavelength exciton band are determined by the exciton-phonon interaction and the generation of Frenkel defects at phase transitions to the superionic state. Fluctuations of the composition of solid solutions do not affect the behavior of the dependences E _m (x) and Γ(x) at 90 K, which is indicative of the localization of excitons in the AgI sublattice of these compounds. A difference in the dependences T _c 1(x) and T _c 2(x) (the γ → β and β → α phase transitions, respectively) is revealed: the curve T _c 1(x) has a minimum at x ≈ 0.5, whereas the curve T _c 2(x) shows a weak maximum.     

Dielectric relaxation and ac conductivity of sodium tungsten phosphate glasses

Studies of dielectric relaxation and ac conductivity have been made on three samples of sodium tungsten phosphate glasses over a temperature range of 77–420 K. Complex relative permitivity data have been analyzed using dielectric modulus approach. Conductivity relaxation frequency increases with the increase of temperature. Activation energy for conductivity relaxation has also been evaluated. Measured ac conductivity (σ_m(ω)) has been found to be higher than σ_dc at low temperatures whereas at high temperature σ_m(ω) becomes equal to σ_dc at all frequencies. The ac conductivity obeys the relation σ_ac(ω)=Aω ^S over a considerable range of low temperatures. Values of exponent S are nearly equal to unity at about 78 K and the values decrease non-linearly with the increase of temperature. Values of the number density of states at Fermi level (N(E _F)) have been evaluated at 80 K assuming values of electron wave function decay constant α to be 0.5 (Å)^?1. Values of N(E _F) have the order 10²⁰ which are well within the range suggested for localized states. Present values of N(E _F) are smaller than those for tungsten phosphate glasses.     

Mössbauer study of Fe-Re alloys prepared by mechanical alloying

The room temperature Mössbauer spectra of ⁵⁷Fe were measured for nanocrystalline iron-based solid solutions Fe _1?x Re _x , prepared by mechanical alloying with x in the range 0.01 ≤ x ≤ 0.04. The obtained data were analysed in terms of the binding energy E _b between two rhenium atoms in the Fe-Re system. The extrapolated value of E _b for x = 0 was used for computation of enthalpy of solution of rhenium in iron. The result was compared with that resulting from the cellular atomic model of alloys by Miedema as well as with value, derived from proper data for Fe-Re solid solutions obtained by melting in an arc furnace. From the comparison it follows that our findings are in agreement with the Miedema’s model predictions and previous Mössbauer studies.     

On the Choice of a Distributed Basis Set in Calculations of Transition-Dipole Moments in the One-Determinant Approximation

The so-called “asymptotic projection technique” developed in previous papers of the authors is applied to the calculation of electronic transition-dipole moments (TDMs) in the one-determinant approximation between states of the same spin and spatial symmetry. The basic equations of the method and specific features of their application to a TDM calculation are briefly discussed. The attention focusses on the choice of a finite one-particle basis set. For this purpose, two possible algorithms for constructing distributed basis sets are proposed. In the first of them, the construction is based on minimization of the Hartree–Fock energy (E_HF) with respect to nonlinear basis set parameters. In the second case, the parameters are determined by minimizing the functional E = E_HF + E_MP2, which includes the electron correlation through the second order of Møller–Plesset perturbation theory (Е_МР2). On the whole, the results of calculations in both basis sets are in agreement with high-accuracy calculations performed by configuration interaction methods. The basis set adapted for E = E_HF + E_MP2 significantly improves the accuracy as compared to the basis set of the first type.     

Spectra and mean energies of prompt neutrons from <Superscript>238</Superscript>U fission induced by primary neutrons of energy in the region <Emphasis Type="Italic">E</Emphasis><Subscript><Emphasis Type="Italic">n</Emphasis></Subscript><20 MeV

The time-of-flight technique is used to measure the ratios R(E, E _n )=N(E, E _n )/N_Cf(E) of the normalized (to unity) spectra N(E, E _n ) of neutrons accompanying the neutron-induced fission of ²³⁸U at primary-neutron energies of E _n =6.0 and 7.0 MeV to the spectrum N_Cf(E) neutrons from the spontaneous fission of ²⁵²Cf. These experimental data and the results of their analysis are discussed together with data that were previously obtained for the neutron-induced fission of ²³⁸U at the primary energies of E _n =2.9, 5.0, 13.2, 14.7, 16.0, and 17.7 MeV.     

Study of the initial stage of yttrium oxidation using characteristic electron-energy-loss spectroscopy

The characteristic electron-energy-loss (EEL) spectra of the pure surface of metallic yttrium and of this surface in the initial stages of oxidation are recorded. The energy of the primary electron beam E _p is 200–1000 eV. The spectra exhibit high-and low-frequency peaks. During oxidation, the positions of the basic peaks in the EEL spectra are significantly shifted. The peaks corresponding to the bulk energy loss shift toward higher energies upon oxidation. The peak corresponding to the low-frequency surface oscillations also shifts, but toward lower energies, and its intensity monotonically decreases with increasing oxygen dose. The differences between the spectra recorded at different E _p are explained as resulting from an increase in the electron escape depth with E _p .     

Energy loss of tens keV charged particles traveling in the hot dense carbon plasma

The energy loss of charged particles, including electrons, protons, and α-particles with tens keV initial energy E0, traveling in the hot dense carbon(C) plasma for densities from 2.281 to 22.81 g/cm3 and temperatures from 400 to 1500 eV is systematically and quantitatively studied by using the dimensional continuation method. The behaviors of different charged particles are readily distinguishable from each other. Firstly, because an ion is thousands times heavier than an electron, the penetration distance of the electron is much longer than that of proton and α-particle traveling in the plasma. Secondly, most energy of electron projectile with E0 100 keV deposits into the electron species of C plasma, while for the cases of proton and α-particle with E0 100 keV,about more than half energy transfers into the ion species of C plasma. A simple decreasing law of the penetration distance as a function of the plasma density is fitted, and different behaviors of each projectile particle can be clearly found from the fitted data.We believe that with the advanced progress of the present experimental technology, the findings shown here could be confirmed in ion-stopping experiments in the near future.     

Fluid synthesis and structure of a new boron nitride polymorph—hyperdiamond fulborenite B<Subscript>12</Subscript>N<Subscript>12</Subscript> (<Emphasis Type="Italic">E</Emphasis> phase)

A new boron nitride polymorph is prepared for the first time by supercritical fluid synthesis in a high-pressure gazostat at a pressure P < 200 MPa and a temperature T < 1000°C in various atmospheres. The formation of the new phase is confirmed by x-ray diffraction and infrared absorption spectroscopy. A number of lines in the x-ray diffraction patterns and infrared absorption spectra of the new phase coincide with those described in the literature for the so-called E phase. On this basis, the conclusion is drawn that the E phase of boron nitride is most likely formed during supercritical fluid synthesis. Since the structure of the E phase is as yet unknown, a model structure of the new phase is proposed in the form of a diamond-like lattice with the sites occupied by molecules of the fulborene B₁₂N₁₂. The proposed structure is confirmed by the good agreement between the calculated and experimental values of the lattice parameters (A = 1.152 and 1.114 nm, respectively), densities (ρ = 2.59 and 2.50–2.60 g/cm³, respectively), and x-ray diffraction patterns. This new boron nitride zeolite with a faujasite lattice is given the name hyperdiamond fulborenite B₁₂N₁₂. The calculated bulk modulus of the hyperdiamond fulborenite B = 658 GPa is higher than that of diamond.