Reactions of DI-η5-cyclopentadienyltricarbonyltriphenylphosphinediiron; an improved synthesis of the cyclopentadienylcarbonyliron tetramer

The compound (C₅H₅)₂Fe₂(CO)₃PPh₃, previously obtained by the photolysis of (C₅H₅)₂Fe₂(CO)₄ with PPh₃, may also be obtained by reflluxing these same reactants in benzene. The compound was isolated in pure form by means of low temperature column chromatography. It is unstable in solution in the absence of added PPh₃. Solid samples also are unstable over long periods of time. Decomposition in solution is complete within one hour at 80° yielding a mixture of (C₅H₅)₂Fe₂(CO)₄ and (C₅H₅)₄Fe₄(CO)₄. This reaction is suppressed by excess PPh₃. Heating a mixture of (C₅H₅)₂Fe₂(CO)₃PPh₃ and P(OEt)₃ gives a nearly quantitative yield of (C₅H₅)₂Fe₂(CO)₃P(OEt)₃. Refluxing a xylene solution of (C₅H₅)₂Fe₂(CO)₄ containing a slight molarr excess of PPh₃ for 7 h results in the isolation of (C₅H₅)₄Fe₄(CO)₄ in 56% yield, making this reaction by far the most convenient method for the preparation, in gram quantities, of this transition metal cluster.     

Synthesis,Thermal Isomerization in Solution and in Solid Phase of the Complexes [Pt(RCN)2Cl2]

The interaction of the clathrate Pt₆Cl₁₂ · 0.1 EtCl · 5.7H₂O with RCN nitriles results in cis-[Pt(PhCH₂CN)₂Cl₂] and in [Pt(RCN)₂Cl₂] (R = CH₂CO₂Et, Ph) complexes as a mixture of cis- and trans-isomers which separated and characterized. Cis-[Pt(MeCN)₂Cl₂] has been synthesized using a well known technique of K₂[PtCl₄] interaction with acetonitrile in water. Heating cis-[Pt(RCN)₂Cl₂] (R = Me, CH₂Ph, CH₂CO₂Et) in the solid phase leads to cis-trans isomerization. In case of cis-[Pt(PhCN)₂Cl₂] thermal conversion results in trans-[Pt(PhCN)₂Cl₂] but the process of geometrical isomerizations accompained by a considerable decomposition of starting material and/or final products. Boiling of cis-[Pt(PhCH₂CN₂)Cl₂] in mixture of EtNO₂? PhCH₂CN or cis-[Pt(EtCO₂CH₂CN)₂Cl₂] in MeNO₂ or EtNO₂ solutions results in complete cis-trans conversion. Similarily heating of cis-[Pt(RCN)₂Cl₂] (R = Me, Ph) in solution produces an equilibrium mixture of cis- and transisomers.     

Lanthanon (III) Complexes of Bifunctional Tridentate and Tetradentate Schiff Bases

Reactions of isopropoxides of praseodymium, neodymium and samarium with bifunctional tridentate and tetradentate schiff bases (i.e. salicylidene-O-aminophenol and bis-salicylaldehyde ethylenediamine) have been carried out in benzene in different stoichiometric ratios resulting in the formation of products with the formula M(OPrⁱ)(C₁₁H₉NO₂), M(C₁₃H₉NO₂)(C₁₃H₁₀NO₂). M₂(C₁₃H₉NO₂) M(OPrⁱ)(C₁₅H₁₄N₂O₂), M(C₁₆H₁₄N₂O₂)(C₁₆H₁₅N₂O₂) and M₂(C₁₆H₁₄N₂O₂)₃ (where M stands for Pr, Nd and Sm). The products were found to be yellow to orange solids soluble in benzene and alcohol. The absorption spectra of these complexes were also recorded in methanol.     

Phase equilibria and glass formation in the As2S3-TlAs2S2Se2 section of the As2S3-As2Se3-TlS system

Alloys in the As₂S₃-TlAs₂S₂Se₂ section of the As₂S₃-As₂Se₃-TlS ternary system were studied and a phase diagram was constructed using physicochemical methods (differential thermal analysis, microstructural analysis, X-ray powder diffraction, also microhardness and density measurements). The diagram in the As₂S₃-TlAs₂S₂Se₂ section is a non-quasi-binary diagonal section of the As₂S₃-As₂Se₃-TlSe quasi-ternary system. It was found that all the alloys in the section under ordinary conditions are obtained in the vitreous state. At low As₂S₃ concentrations in the section, solid solutions form up to 2.5 mol %, and at low TlAs₂S₂Se₂ concentrations, their extent is 3 mol %.     

Preparation and characterization of M(CH3)5 (M = Nb or Ta) and Ta(CH2C6H5)5 and evidence for decomposition by α-hydrogen atom abstraction

The preparations of Nb(CH₃)₅, Ta(CH₃)₅, and Ta(CH₂C₆H₅)₅ are reported in detail. The M(CH₃)₅ complexes decompose autocatalytically to give 3.4 ± 0.1 mol of methane and a non-hyclrolyzable residue with approximate composition MC_1–5H while Ta(CH₂C₆H₅)₅ decomposes in a non-autocatalytic manner to give ca. 2.6 mol of toluene per Ta. Decomposition of Nb(CD₃)₅ gave 96% CD₄ in diethyl ether while the toluene produced on decomposition of Ta(CD₂C₆H₅)₅ was at least 90%-d₃. An observed kinetic deuterium isotope effect of 2–3 in each case is evidence that an α-CH(D) bond is broken in a slow step of the decomposition. It is postulated that M(CH₃)₅ and Ta(CH₂C₆H₅)₅ decompose primarily by α-hydrogen atom abstraction though almost certainly in a complex, possibly intermolecular fashion in the case of M(CH₃)₅. In neither case (R = CH₃ or CH₂C₆H₅) was there evidence for significant homolytic cleavage of the metalcarbon bond to give free alkyl radicals.     

Studies on the formation of manganese molybdate

The reaction of MoO₃ with various oxides of manganese (MnO, Mn₂O₃, Mn₃O₄ and MnO₂) and with MnCO₃ has been studied in air and nitrogen atmospheres employing DTA, TG and X-ray diffraction methods, with a view to elucidating the conditions for the formation of MnMoO₄. Thermal decomposition of MnCO₃ has also been studied in air and nitrogen atmospheres to help understand the mechanism of the reaction between MnCO₃ and MoO₃. The studies reveal that, whereas MnO, Mn₂O₃ and MnO₂ react smoothly with MoO₃ to form MnMoO₄, Mn₃O₄ does not react with MoO₃ in the temperature range investigated (48O–6OO°C). An equimolar mixture of MnCO₃ and MoO₃ reacts in air to yield MnMoO₄, while only a mixture of Mn₃O₄ and MoO₃ remains as final product when the same reaction is carried out in nitrogen. Marker studies reveal that manganese ions are the main diffusing species in the reaction between MoO₃ and manganese oxides that result in MnMoO₄.     

Interactions in the SrS-Cu2S-Ln2S3 (Ln = Gd or Er) Systems and Phase-Formation Laws in the SrS-Cu2S-Ln2S3 (Ln = La-Lu) Systems

Structure solution has been carried out for newly synthesized compounds SrLnCuS₃ (Ln = Pr, Sm, Dy, or Er). These sulfides have orthorhombic structures of the following types: SrPrCuS₃ crystallizes in a BaLaCuS₃-type structure, space group Pnma; SrLnCuS₃ (Ln = Sm or Dy) crystallize in an Eu₂CuS₃-type structure, space group Pnma; and SrErCuS₃, in a KZrCuS₃-type structure, space group Cmcm. In studies of the SrS-Cu₂S-Ln₂S₃ (Ln = Gd or Er) systems, the following tie-lines at 1050 K were located: SrLnCuS₃-SrLn₂S₄, SrLnCuS₃-SrS, SrLnCuS₃-CuLnS₂, Cu₂S-SrLnCuS₃, SrLnCuS₃-solid solution C₀ of the Cu₂S-Gd₂S₃ (β-Cu₃ErS₃) system, and Ln₂S₃-SrLnCuS₃. In the series of the SrS-Cu₂S-Ln₂S₃ (Ln = La-Lu) systems, two tendencies are observed: monotony (decrease in the unit cell parameters and volumes and increase in the melting temperatures of SrLnCuS₃ compounds in the ranges La-Nd and Sm-Lu) and periodicity (two types of triangulation of the SrS-Cu₂S-Ln₂S₃ system, three structure types, and different space groups of SrLnCuS₃ compounds; jump in the melting temperatures of the SrLnCuS₃ compounds in the range Nd-Sm).     

Reactions of powdered silicon with some pyrotechnic oxidants

Thermogravimetry (TG) and differential scanning calorimetry (DSC) have been used to examine the thermal behaviour, in N₂ and in air, of the Si/Sb₂O₃, Si/KNO₃, Si/Fe₂O₃ and Si/SnO₂ pyrotechnic systems, in relation to the behaviour of the individual constituents.TG curves for Si powder, heated alone in air, showed that limited oxidation of Si occurred above 700°. In N₂, Sb₂O₃ sublimed completely between 500 and 900° and, in air, sublimation was accompanied by oxidation to Sb₂O₄. The Sb₂O₄ decomposed at higher temperatures. DSC curves for KNO₃ heated in N₂ showed the usual crystalline transition and melting endotherms followed by endothermic decomposition between 400 and 950°. DSC and TG curves of SnO₂and Fe₂O₃ revealed no thermal events when samples were heated to 1000° in either N₂ or air.For the Si/Sb₂O₃ system, the oxidation of Si by Sb₂O₃ between 590 and 700°, was complicated by sublimation of Sb₂O₃ in N₂ and also by the oxidation of Sb₂O₃ in air. No thermal events were observed for the Si/SnO₂and Si/Fe₂O₃ systems when heated under a variety of conditions in either N2 or in air, although these systems do sustain combustion on suitable ignition. In the Si/KNO₃ system, oxidation of Si occurs in a KNO₃ melt at temperatures above 560° in nitrogen and in air.

---

Zusammenfassung Mittels TG und DSC wurde das thermische Verhalten der pyrotechnischen Systeme Si/Sb₂O₃, Si/KNO₃, Si/Fe₂O₃ und Si/SnO₂in N₂ und in Luft im Vergleich zum Verhalten der einzelnen Komponenten untersucht.TG-Aufnahmen über das Erhitzen von Si-Pulver in Luft zeigten eine begrenzte Oxidation von Silizium oberhalb 700°C. Sb₂O₃ sublimiert in Stickstoff vollständig zwischen 500 und 900°C, in Luft wird die Sublimation durch Oxidation zu Sb₂O₄ begleitet. Sb₂O₄ zersetzt sich bei höheren Temperaturen. DSC-Aufnahmen für KNO₃ in N₂ zeigen die gewohnten Umwandlungs- und Schmelzendothermen, gefolgt von einer endothermen Zersetzung zwischen 400 und 950°C. Die DSC- und TG-Kurven für SnO₂und Fe₂O₃ zeigen bei Erhitzen bis 1000°C weder in N₂ noch in Luft den Verlauf thermische Prozesse an.Bei dem System Si/Sb₂O₃ spielt sich neben der Oxidation von Si durch Sb₂O₃ zwischen 590 und 700°C auch eine Sublimation von Sb₂O₃ in N₂ sowie eine Oxidation von Sb₂O₃ in Luft ab. Für die Systeme Si/SnO₂und Si/Fe₂O₃ konnten durch Erhitzen unter einer Reihe von Bedingungen weder in Luft noch in N₂ Thermoprozesse nachgewiesen werden, obwohl diese Systeme nach geeigneter Zündung den Brennvorgang aufrechterhalten. Im System Si/KNO₃ erfolgt sowohl in N₂ als auch in Luft oberhalb 560°C die Oxidation von Si in der KNO₃-Schmelze.

---

---

Dedicated to Professor Dr. H. J. Seifert on the occasion of his 60^th birthday     

Vibrational spectra of MII3Pb(P2O7)2 (MII = Ni,Co)

Raman and IR spectra of polycrystalline Ni₃Pb(P₂O₇)₂ and Co₃Pb(P₂O₇)₂ have been recorded and analyzed. The internal modes are assigned in terms of PO₃ and POP vibrations. The results point to a bent POP bridge configuration in Co₃Pb(P₂O₇)₂ as in Ni₃Pb(P₂O₇)₂. In the cobalt compound, the P₂O⁴⁻₇ ions are distorted. Non-coincidence of the majority of the Raman and IR bands confirms a centrosymmetric structure for Ni₃Pb(P₂O₇)₂, and Co₃Pb(P₂O₇)₂. The POP bridge angle is slightly higher in the cobalt compound than in the nickel compound.     

The systems Zr(Nb,Ti)(R)O2−δ, R=Yb, Ca—optimization of mixed conductivity and comparison with results of other systems (R=Y and Gd)

In this work we address the optimization of mixed conductivity in fluorite compounds based on zirconia. Phase relations of the new systems YbO_1.5-NbO_2.5-ZrO₂, and CaO-NbO_2.5-ZrO₂ are presented. The limit of the cubic defect fluorite phase in YbO_1.5-NbO_2.5-ZrO₂ closely resembles that of the system YO_1.5-NbO_2.5-ZrO₂, whilst in CaO-NbO_2.5-ZrO₂ is narrow extending to include composition Ca_0.255Nb_0.15Zr_0.595O_1.82 at 1500°C. The influence of dopant ion size, charge and composition on ionic conduction is assessed and parallels are drawn with the systems YO_1.5-NbO_2.5-ZrO₂ and YO_1.5-TiO₂-ZrO₂. Comparison of these results with published data on the Ti containing systems CaO-TiO₂-ZrO₂, GdO_1.5-TiO₂-ZrO₂ shows that the highest mixed conducting compositions can only be offered in the system YO_1.5-TiO₂-ZrO₂ out of all the systems here studied.     

Study of Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> interaction with solid lithium-containing electrolytes

Compatibility of the lithium-titanium spinel Li₄Ti₅O₁₂ in contact with precursors of lithium-conducting solid electrolytes of composition Li_1.3Al_0.3Ti_1.7(PO₄)₃ (LATP), Li_1.5Al_0.5Ge_1.5(PO₄)₃ (LAGP), Li_0.5La_0.5TiO₃ (LLT) was studied. It was found that, in sintering of Li₄Ti₅O₁₂ brought in contact with LATP and LAGP, a solid-phase reaction occurs to give nonconducting phases (TiO₂ and Li₃PO₄). The conductivity of the stable composite Li₄Ti₅O₁₂/LLT (10%) is higher than that of the starting Li₄Ti₅O₁₂, which makes it possible to regard the composite as a promising anode material for lithium-ion batteries.     

Reaktionen von Zinnchloriden mit Polysulfiden. Die Kristallstrukturen von (PPh4)2[SnCl2(S6)2], (PPh4)2[Sn4Cl4S5(S3)O] und (PPh4)2[SnCl6] · S8 · 2CH3CN

Reaction of Tin Chlorides with Polysulfides. Crystal Structures of (PPh₄)₂[SnCl₂(S₆)₂], (PPh₄)₂[Sn₄Cl₄S₅(S₃)O], and (PPh₄)₂[SnCl₆] · S₈ · 2CH₃CN . The reaction of PPh₄[SnCl₃] with Na₂S₄ in acetonitrile in the presence of small amounts of water yields (PPh₄)₂[Sn₄Cl₄S₅(S₃)O] and minor amounts of (PPh₄)₂[SnCl₂(S₆)₂], PPh₄Cl · 2S₈ and (PPh₄)₂[SnCl₆]. SnCl₄ is partially reduced by (PPh₄)₂S_x, PPh₄[SnCl₃] and (PPh₄)₂[SnCl₆] · S₈ · 2CH₃CN being produced. According to the X-ray crystal structure determination the [Sn₄Cl₄S₅(S₃)O]^2?-ion consists of an O atom that is coordinated by four Sn atoms which in turn are liked with one another by five single S atoms and one S₃ group. In the [SnCl₂(S₆)₂]^2?-ion the Sn atom is octahedrally coordinated by two Cl atoms in trans arrangement and by two chelating S₆ groups. Octahedral [SnCl₆]^2? ions and S₈ molecules in the crown conformation are present in (PPh₄)₄[SnCl₆] · S₈ · 2CH₃CN.     

Über die Darstellung von Verbindungen des Typs Cl3VNR

The reaction of VOCl₃ with sily-substituted amines results in the substitution of oxygen in VOCl₃ and in compounds of type Cl₃V = NR. In this way, we succeeded in isolating the pure compound Cl₃V = NCH₃ (I). The existence of compound (Cl₃VNC₆H₅)_x (II) was proved by direct synthesis from Cl₃VO and ((CH₃)₃Si)₂NC₆H₅, and by the decomposition of the new addition compounds Cl₃VO · 2 OCNC₆H₅ (III) and Cl₃VO · 2 OSNC₆H₅ (IV).     

Reactivity in the solid state between CoWO4 and RE2WO6 where RE = Sm, Eu, Gd

Reactivity in the solid state between CoWO₄ and some rare-earth metal tungstates RE₂WO₆ (RE = Sm, Eu, Gd) was investigated by the XRD method. Two families of new isostructural cobalt and rare-earth metal tungstates, Co₂RE₂W₃O₁₄ and CoRE₄W₃O₁₆, were synthesized. The Co₂RE₂W₃O₁₄ phases are formed by heating in air the CoWO₄ and RE₂WO₆ compounds mixed at the molar ratio 2:1, while the CoRE₄W₃O₁₆ phases are synthesized at the molar ratio of CoWO₄/RE₂WO₆ equals to 1:2. The Co₂RE₂W₃O₁₄ phases as well as the CoRE₄W₃O₁₆ compounds crystallize in the orthorhombic system. The Co₂RE₂W₃O₁₄ and CoRE₄W₃O₁₆ compound melt above 1150 °C. A melting manner of the Co₂RE₂W₃O₁₄ and CoRE₄W₃O₁₆ compounds was determined in an inert atmosphere. The formation of CoWO_4−x phase was observed during heating in an inert atmosphere.     

Nanostructuring in the process of the formation of mixed-anion compounds: Rare-earth borogermanates, germanophosphates, and borotungstates

Specific features of the textures (the preferred orientation of the nanometer building blocks) in the structures of mixed-anion compounds—rare-earth borogermanates, germanophosphates, and borotungstates that arise from the acid-base interaction in the Ln₂O₃-B₂O₃-GeO₂, Ln₂O₃-GeO₂-P₂O₅, and Ln₂O₃-B₂O₃-WO₃ systems (Ln = La-Gd)—have been studied. Based on characteristic texture traits, the mixed-anion compounds of early rare-earth elements can be divided into three groups: (i) Ln₂O₃: E_xO_y > 1, (ii) Ln₂O₃: E_xO_y = 1, and (iii) Ln₂O₃: E_xO_y < 1. Because of the dominant structural effect of the basic oxide Ln₂O₃ in the compounds of the first group, the structures of Nd₁₄O₈(BO₃)₆(GeO₄)₂ and Pr₁₁O₁₀(GeO₄)(PO₄)₃ are composed of infinite [LnO_n] bands and layers and discrete groups [EO_m] located in the interband and interlayer spaces. The dominant structural effect of the acid oxides [E_xO_y] in the compounds of the third group leads to the appearance of ring textures composed of [LnO_n], as well as to the appearance of chains and networks composed of [EO_m], in the structures of Ln(BGeO₅) and Ln(BO₂)(WO₄). Original Russian Text ￠ G.A. Bandurkin, N.N. Chudinova, G.V. Lysanova, K.K. Palkina, E.V. Murashcva, V.A. Krut’ko, G.M. Balagina, 2006, published in Zhurnal Neorganicheskoi Khimii, 2006, Vol. 51, No. 2, pp. 334–347.     

Pd/Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts for the selective liquid-phase hydrogenation of acetylene to ethylene

The structure of Ga₂O₃–Al₂O₃ supports and Pd/Ga₂O₃–Al₂O₃ catalysts and the performance of these catalysts in liquid-phase acetylene hydrogenation have been investigated. The deposition of Ga(NO₃)₃ onto Al₂O₃ by impregnation followed by calcination of the impregnated support at 600°C yields γ-Ga₂O₃–Al₂O₃ solid solutions containing up to 50 wt % Ga₂O₃. X-ray diffraction characterization of model palladium catalysts and their temperature-programmed reduction with hydrogen have demonstrated that, while palladium in Pd/Ga₂O₃ is in the form of a Pd₂Ga alloy, in the Pd/γ-Ga₂O₃–Al₂O₃ catalyst there is no direct interaction between PdО and Ga₂O₃ particles and palladium is in the monometallic state. The introduction of 10–20 wt % gallium oxide into Al₂O₃ lowers the activity of the supported palladium catalyst relative to that of the initial Pd/Al₂O₃ but increases the ethylene yield by enhancing the ethylene formation selectivity.     

Synthesis,Structure, and Theoretical Study of Trifluoromethyl Derivatives of C84(23) Fullerene

Trifluoromethylation of a higher fullerene mixture with CF₃I was performed in ampoules at 550 °C. HPLC separation followed by crystal growth and X‐ray diffraction study resulted in the structure elucidation of nine CF₃ derivatives of D_2d‐C₈₄ (isomer 23). The molecular structures of C₈₄(23)(CF₃)₄, C₈₄(23)(CF₃)₈, C₈₄(23)(CF₃)₁₀, C₈₄(23)(CF₃)₁₂, two isomers of C₈₄(23)(CF₃)₁₄, two isomers of C₈₄(23)(CF₃)₁₆, and C₈₄(23)(CF₃)₁₈ were discussed in terms of their addition patterns and the relative formation energies. Extensive theoretical DFT calculations were performed to identify the most stable molecular structures. It was found that the addition of CF₃ groups to the C₈₄(23) fullerene is governed by two main rules: no additions in positions of triple hexagon junctions and predominantly para additions in C₆(CF₃)₂ hexagons on the fullerene cage. The only exception with an isolated CF₃ group in C₈₄(23)(CF₃)₁₂ is discussed in more detail.     

The decomposition of the oxalate precursor and the stability and reduction of the YBa2Cu4O8 superconductor studied by TG coupled with FTIR and by XRD

The 124 superconductor YBa₂Cu₄O₈ was prepared from the oxalate precursor Y₂(C₂O₄)₃. ·4BaC₂O₄·8CuC₂O₄·xH₂O at one atmosphere oxygen pressure. In O₂ the precursor decomposes in one step at 300°C and more gradually (300°–600°C) in Ar. The stability of the superconductor is strongly dependent on the gas atmosphere: in O₂ and in air there is no significant weight change as long as the temperature does not exceed 800°C, whereas in a 1% O₂-99%N₂ mixture decomposition starts at about 670°C with the formation of CuO and YBa₂Cu₃O_x withx<7. The reduction of YBa₂Cu₄O₈ in a 5% H₂-95% Ar mixture takes place in at least four major steps with formation of products such as Y₂O₃, BaO, Cu₂O, Cu, BaY₂O₄ and Ba₄Y₂O₇.     

Trimethylphosphine complexes of tungsten(O) and (IV). X-ray crystal structures of trimethylphosphine tris (phenylacetylene) tungsten(O); bis(trimethylphosphine) tetrakis (methylisocyanide) tungsten(O), and oxodichlorotris (trimethylphosphine) tungsten (IV)

The reduction of WCl₄(PMe₃)₃ by sodium amalgam in presence of phenylacetylene gives W(PMe₃)(PhCCH)₃ (A). Reduction in presence of methylisocyanide gives W(PMe₃)₂(MeNC)₄ (B), while in presence of excess PMe₃ in tetrahydrofuran under hydrogen, WH₂Cl₂(PMe₃)₄ (C) is formed. The reaction of WCl₂(PMe₃)₄ with methanol in tetrahydrofuran gives mixtures of WH₂Cl₂(PMe₃)₄ and WOC1₂(PMe₃)₃ (D).The structures of A, B, and D have been determined by X-ray diffraction.     

Derivate von arsensubstituierten Phosphorchalkogeniden

Derivatives of Arsenic Substituted Phosphorus Chalcogenides α-AsP₃S₃I₂, α-AsP₃Se₃I₂, and three isomers of β-AsP₃S₃I₂ were observed besides several phosphorus sulfides by ³¹P NMR spectroscopy after the reaction of As_nP_4–nE₃ (E ? S; Se; n = 0–4) with I₂ in the melt or with I₂, PI₃, and N-iodosuccinimid in CS₂ solutions. The reaction of As_nP_4–nS₃ with CHI₃ in CS₂ solution yielded two isomers of β-AsP₃S₃(CHI₂)I.