Variation of the reactivity of solids near the interface reagent-product of the topochemical reaction

During the topochemical decomposition of ammonium perchlorate and copper hypophosphite an enhanced acid concentration occurs near the reagent-product interface. Concentration profiles of the acid were observed after the treatment of the partially decomposed crystals by indicator solution and by microphotometry. Profiles exhibit the diffusive characteristics. The diffusion coefficient is 10^?10 cm²/sec for ammonium perchlorate and 10^?9 cm²/sec for copper hypophosphite at 20°C. It is concluded that the variation of the reactivity near the interface is due to the enhanced acid concentration.     

Laser photolysis study of the triplet states of fulvic acids in aqueous solutions

The spectral and kinetic characteristics of short-lived intermediates formed during the photolysis of aqueous and alkaline (0.1 mol l^?1 NaOH) solutions of fulvic acids (FA) were studied by the nanosecond laser photolysis technique. Laser photolysis of FA at 337 nm leads to the formation of short-lived triplet states of FA (³FA) with a quantum yield of about 1% and different relatively long-lived intermediates (with decay rate constants in deoxygenated solutions of 1.8 × 10³–2.1 × 10⁵ and 80–160 s^?1, respectively), which are characterized by absorption spectra with maximums at λ ≤ 400 nm. ³FA are quenched by atmospheric oxygen with rate constants of 5.4 × 10⁸–1.1 × 10⁹ l mol^?1 s^?1. Introduction of phenols into the solutions at concentrations up to 0.1 mol l^?1 has no appreciable effect on the decay kinetics of the detected intermediate products of FA photolysis.     

Photolysis of poly(tert-butyl acrylate) in the region of the glass transition temperature

The thin film (1 × 10^?5 cm.) photolysis (2537 A.) of poly(tert-butyl acrylate) under 1 atm. helium pressure has been investigated in detail. Isobutene was the only significant volatile product in the temperature range 20–110°C. The reaction was demonstrated to be initially a first-order decomposition with an energy of activation of 3.3 kcal./mole in the glassy state. Above the glass transition temperature a value of 1.8 kcal./mole was found. The rate of isobutene formation is autoaccelerated when a minimum of one acrylic acid unit is generated per chain. The initial quantum yield for the formation of isobutene varies from 0.083 to 0.17 over the temperature range studied. There was no dependence of quantum yield on the exciting wavelength using sources of 1849, 2537, and 3660 A. The intensity exponent was found to be unity, consistent with first-order decomposition kinetics.     

Effect of silver and copper ions on the decomposition of ozone in water

Features of the kinetics of ozone decomposition in water at pH 2 are studied depending on the concentration of silver and copper ions that are present. The existence of a critical concentration of metal ions (??3?6 × 10^?6 M) is established, below which ions slow the rate of ozone decomposition and above which the accelerate the process. It is concluded that the first region is due to the capture of hydroxyl and other radicals by metal ions, inhibiting the chain of ozone decomposition in water. A further increase in the concentration of ions leads to dominance of their direct interaction with molecules of ozone. A mechanism for the process is proposed and the rate constants of reaction of ozone with silver ions and copper are calculated (0.033 and 0.06 M^?1 s^?1, respectively).     

Used a new aza-thia-macrocycle as a suitable carrier in potentiometric sensor of copper (II)

A new modified carbon paste electrode for determination of Cu²⁺ made in our laboratory that used a new synthesized macrocycle 7,16-diaza-1-thia-4,10,13,19-tetraoxa-6,17-dioxo-2,3;20,21-dinaphtho-cyclouneicosane as modifier. This sensor exhibits a good affinity toward copper (II) ions over a wide variety of other metal ions. The electrode exhibits a Nernstian slope of 30 (±0.5) mV per decade for copper (II) ions over a wide concentration range (1.0 × 10^?8–1.0 × 10^?2 mol L^?1), with a limit of detection of 7.0 × 10^?9 mol L^?1 (~0.45 ppb). It has a response time of 30 s and can be used for at least 3 months without any considerable divergence in responses. The potentiometric response of the electrode is independent of the pH of test solution in the pH range 3.5–7.5. Finally, it was successfully used as an indicator electrode for determination of copper (II) in real samples such as Karoun river and tap water.     

Novel Copper(II)‐Selective Membrane Electrode Based on a New Synthesized Schiff Base

A PVC membrane electrode for copper(II) ion based on a recently synthesized Schiff base as a suitable ion carrier was constructed. The electrode exhibits a Nernstian slope of 28.3 ± 0.6 mV per decade of Cu²⁺ over a wide concentration range of 7.0 × 10^?6‐2.6 × 10^?2 M with a detection limit of 5.0 × 10^?6M in the pH range of 4.2–5.8. The response time is about 10s and it can be used for at least 1 month without any considerable divergence in potential. It was successfully applied as an indicator electrode in the potentiometric titration of copper ions.     

Thermoanalytical investigation of the synthesis of pyrazine and bipyrazine via the pyrolysis of the bis(pyrazinecarboxylate)copper(II) complex

The pyrolysis of hydrated bis(pyrazinecarboxylate)copper(II) under an argon atmosphere proceeds via the loss of the water molecules at 84–95°C, ΔH=40.4 kJ (mol H₂O)^?1 followed by the thermal decomposition of the complex at 284–325°C, ΔH=97.0 kJ·mol^?1, yielding 0.72 mole of pyrazine, 0.28 mole of bipyrazine, and 2 mole of CO₂ per mole of complex.     

没食子酸的激光光解研究

The transient species of gallic acid(GA)have been studied by 266 nm nanosecond laser flash photolysis inaqueous solution and acetonitrile.The intermediate with absorption at 320 nm was identified as excited triplet state(~3GA~*),the decay rates of which were obtained in aqueous solution and acetonitrile respectively.Energy transferfrom ~3GA~* to β-carotene was observed and the energy transfer rate constant k_(ent)was determined to be 2.2×10~9mol~(-1)·L·s~(-1).GA underwent photoionization during photolysis and the quantum yield of photoionization was de-termined to be 0.12 at room temperature with KI as a reference.     

Palladium metal electrode and its analytical application to precipitation and acid–base analysis in aqueous and non-aqueous media

Electrochemical characterization of palladium electrode has been reported. The investigated electrode showed a linear dynamic response for p-toluensulfonic acid and iodide ions in the concentrations range between 5?×?10^?1 and 1?×?10^?5 mol L^?1 with a Nernstian slope of 55 mV for p-toluensulfonic acid and 63 mV per decade for iodide ions in water, as well as 53 mV for p-toluensulfonic acid and 51 mV per decade for iodide ions in dioxane. The response time of the electrodes was less than 10 s in the used solvents. Some potential analytical applications of the sensors have been pointed. Palladium electrode for the potentiometric titrations of acids (citric, barbituric, and p-toluensulfonic acid), bases (N,N’-diphenylguanidine, tributylamine, and 2,2'–bipyridine), halides, and some real samples in aqueous and non-aqueous solutions were studied. Тetrabutylammonium hydroxide, perchloric acid, and silver nitrate proved to be very suitable titrating agents for these titrations. The standard deviation of the determination of the investigated compounds was less than 0.9 % from those obtained with a glass electrode, i.e., silver electrode.     

Application of Dipon, (1,4,8,11-Tetraazacyclotetradecane-4,11-bis(methylphosphonic acid) as Selective Complexing Agent for Determination of Copper(II)

A new macrocyclic ligand, 1,4,8,11-tetraazacyclotetradecane-1,8-bis(methylphosphonic acid)(dipon), is selective complexing agent for copper(II) over other transition metal ions. The ligand was tested for analytical applications of copper(II) determination. Spectrophotometric determination under optimal experimental conditions (?log [H⁺]= 5.5, c _L≈ 5 × 10^?4 mol L^?1, λ= 310 nm) is valid in dynamic range (5–200)× 10^?6 mol L^?1 with detection limit 2.2 × 10^?6 mol L^?1, i.e. 0.14 μg ml^?1. Volumetric determination of copper(II) with standardized dipon solution was used for copper(II) determination at micromolar concentration level without any necessity to sequester interfering metal ions. A sharp end point of titration was detected by UV/VIS spectrophotometry. Both methods were tested on artificial and real samples (spiked mineral water, alloys) and gave satisfactory results without any systematic error. The advantage of both methods is their simplicity, rapidity and no sensitivity to the presence of other metal ions.     

The kinetics and mechanism of n-butyraldehyde photolysis in the vapor phase at 313 nm

The photolysis was investigated at 313 nm wavelength, 253–529 K temperatures, and 4 × 10^?11-2 × 10^?9 mol·photon/cm²·sec light intensities by determining the quantum yields of 20 reaction products. Primary quantum yields for the seven primary processes and rate constant ratios, rate constants, and Arrhenius parameters for secondary processes were derived on the basis of the suggested reaction scheme. The dependence of the quantum yields of the four major primary processes on experimental conditions was established.     

Studies on the oxygen atom transfer reactions of peroxomonosulfate: Catalytic effect of hemiacetal

The reaction of peroxomonosulfate (PMS) with glycolic acid (GLYCA), an alpha hydroxy acid, in the presence of Ni(II) ions and formaldehyde was studied in the pH range 4.05–5.89 and at 31°C and 38°C. When formaldehyde and Ni(II) ions concentrations are ～5.0 × 10^?4 M to 10.0 × 10^?4 M, the reaction is second order in PMS concentration. The rate is catalyzed by formaldehyde, and the observed rate equation is (?d[PMS])/dt = (k′₂[HCHO][Ni(II)][PMS]²)/{[H⁺](1+K₂[GLYCA])}. The number of PMS decomposed for each mole of formaldehyde (turnover number) is 5–10, and the major reaction product is oxygen gas. The first step of the reaction mechanism is the formation of hemiacetal by the interaction of HCHO with the hydroxyl group of nickel glycolate. The peroxomonosulfate intermediate of the Ni‐hemiacetal reacts with another molecule of PMS in the rate‐limiting step to give the product. This reaction is similar to the thermal decomposition of PMS catalyzed by Ni(II) ions. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 41: 642–649, 2009     

Poly(vinylpyrrolidone)‐based films grown on copper surfaces

The influence of molecular weight and the amount of the poly(vinylpyrrolidone) (PVP) on the growth of poly(vinylpyrrolidone)–based films on copper surfaces was studied by electrochemical, infrared and electronic spectroscopy, and thermogravimetric methods. Complex polymer/metal ions were deposited onto a copper surface, as the result of the electrochemically generated reaction of copper cations with PVP and SCN^?, in sulfuric acid media. Spontaneous film growth on copper surfaces was generated and characterized as a Cu(II)/PVP/SCN^? complex. Infrared spectra and thermal gravimetric curves of the films generated at + 0.7 V were compared with the chemically synthesized complex, and show the same patterns. The oxidation process can be described as: Cu(0)→Cu(I) and Cu(I)→Cu(II), and the copper complex formed at more positive potentials was characterized as Cu(II)/PVP/SCN^?, with copper bonded to the oxygen atom of PVP and thiocyanate ligand N‐linked. This study focuses on the complex formation on a copper surface in acid media and its characterization through electrochemical and spontaneously generated reactions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2206–2214, 2009     

Thermal decomposition kinetics of potassium iodate

The effect of gamma ray irradiation on the rate and kinetics of thermal decomposition of potassium iodate (KIO₃) has been studied by thermogravimetry (TG) under non-isothermal conditions at different heating rates (3, 5, 7, and 10 K min^?1). The thermal decomposition data were analyzed using isoconversional methods of Flynn–Wall–Ozawa, Kissinger–Akahira–Sunose, and Friedman. Irradiation with gamma rays increases the rate of the decomposition and is dependent on the irradiation dose. The activation energy decreases on irradiation. The enhancement of the rate of the thermal decomposition of KIO₃ upon irradiation is due to the combined effect of the production of displacements and extended lattice defects and chemical damage in KIO₃. Non-isothermal model fitting method of analysis showed that the thermal decomposition of irradiated KIO₃ is best described by the contracting sphere model equation, with an activation energy value of ~340 kJ mol^?1.     

Mass spectrometry of π-complexes of transition metals XVIII. Products of addition of hydrogen and deuteroexchange in mass spectra of some π-complexes of transition metals

In the mass spectra of some π-complexes of transition metals, obtained by their simultaneous evaporation with organic molecules and deuteroanalogues, protonated (deuterated) molecular and fragment ions have been discovered. They are formed as a result of ion—molecule reactions in the ionization chamber of the mass spectrometer at pressures of 10^?510^?4mmHg as well as during the interactions of neutral molecules.     

CdS/ZnS core-shell quantum dots capped with mercaptoacetic acid as fluorescent probes for Hg(II) ions

We have synthesised water soluble CdS/ZnS core-shell quantum dots (QDs) capped with mercaptoacetic acid (MAA). They were characterised by UV–vis absorption spectroscopy, fluorescence spectroscopy, FT-IR and transmission electron microscopy. Such QDs can be used as fluorescent probes for the determination of metal ions because they quench the fluorescence of the QDs. The QDs exhibit absorption and emission bands at 345?nm and 475?nm respectively, which is more longer wavelength compared to MAA-capped CdS QDs and obviously is the result of the larger particle size. The fluorescence intensity of CdS-based QDs is strongly enhanced by coating them with a shell of ZnS. In addition, such functionalised QDs are more sensitive to Hg(II) ions. Parameters such as pH, temperature and concentration of the QDs have been optimised. A high selectivity and sensitivity toward Hg(II) ions is obtained at pH 7.4 and a concentration of 12.0?mg of QDs per L. Under optimum conditions, the fluorescence intensity of CdS/ZnS QDs is linearly proportional to the concentration of Hg(II) in the range from 2.5 to 280?nM, with a detection limit of 2.2?nM. The effect of potentially interfering cations was examined and confirmed the high selectivity of this material.

Amino Acid–Porphyrin Conjugates: Synthesis and Study of their Photophysical and Metal Ion Recognition Properties

Synthesis, photophysical and metal ion recognition properties of a series of amino acid‐linked free‐base and Zn‐porphyrin derivatives (5–9) are reported. These porphyrin derivatives showed favorable photophysical properties including high molar extinction coefficients (>1 × 10⁵ m ^?1 cm^?1 for the Soret band), quantum yields of triplet excited states (63–94%) and singlet oxygen generation efficiencies (59–91%). Particularly, the Zn‐porphyrin derivatives, 6 and 9 showed higher molar extinction coefficients, decreased fluorescence quantum yields, and higher triplet and singlet oxygen quantum yields compared to the corresponding free‐base porphyrin derivatives. Further, the study of their interactions with various metal ions indicated that the proline‐conjugated Zn‐porphyrins (6 and 9) showed high selectivity toward Cu²⁺ ions and signaled the recognition through changes in fluorescence intensity. Our results provide insights on the role of nature of amino acid and metallation in the design of the porphyrin systems for application as probes and sensitizers.     

Physico‐Chemical Studies on Cu(II) Complexes of Acrylate Chelating Polymers

Abstract

Metal chelating polymers containing amide and carboxylic groups were prepared by gamma‐radiation polymerization of acrylic acid (AA) monomers in the presence of polyacrylamide (PAM). The resins obtained were loaded by copper ions and characterized by FT‐IR spectroscopy, electron spin resonance (ESR), thermogravimetric analysis (TGA), and differential scanning calorimetery (DSC). The IR spectra indicated a lower frequencies shift in the carbonyl bands due to copper ion chelation with carbonyl groups in the polymer resins. Also, the IR spectra reveal a splitting in the band at 3600–3200?cm^?1 that due to the coordination of the NH and OH groups with copper ions. The ESR spectrum was anisotropic with hyperfine structure having the following values 2.3808 and 2.07218 for g _∥ and g _⊥, respectively. These spectra for copper ions have square planar coordination with two nitrogen and two oxygen atoms. TGA and DSC studies show that radiation crosslinking and complexation with copper ion increase the thermal stability of PAM–AA resins. Meanwhile, resin complexes with copper ion showed a higher thermal stability than pure resin. The increase in thermal stability may be correlated with the metal ions coordination with NH and OH groups; this coordination prevents the splitting of ammonia and water molecules. Also, the metal ions providing a coordination crosslink between polymer chains could increase thermal stability.     

The fate of the hydroxyalkoxy radical in the OH‐initiated oxidation of isoprene

Rate constants for several intermediate steps in the OH‐initiated oxidation of isoprene were determined using laser‐photolysis/laser‐induced fluorescence of OH radicals at total pressures between 3 and 4 Torr at 295 K. The rate constant for decomposition of the hydroxyalkoxy radical was determined to be (3.0 ± 0.5) × 10⁴ s^?1 in this pressure range, which is in fair agreement with previous work. The presence of a prompt alkoxy decomposition pathway was also investigated and found to contribute less than 10% to the total hydroxyalkoxy radical decomposition. The rate constant for the reaction of the hydroxyperoxy radical with NO was determined to be (2.5 ± 0.5) × 10^?11 cm³ molecule^?1 s^?1, which is moderately higher than previously reported. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 255–261, 2002     

The influence of CaCO3 filler component on thermal decomposition process of PP/LDPE/DAP ternary blend

Polypropylene‐low density polyethylene (PP‐LDPE) blends involving PP‐LDPE (90/10 wt%.) with (0.06 wt%) dialkyl peroxide (DAP) and different amounts (5, 10, 20 wt%) of calcium carbonate (CaCO₃) were prepared by melt‐blending with a single‐screw extruder. The effect of addition of CaCO₃ on thermal decomposition process and kinetic parameters, such as activation energy and pre‐exponential factor of PP‐LDPE blend with DAP matrix, was studied. The kinetics of the thermal degradation of composites was investigated by thermogravimetric analysis in dynamic nitrogen atmosphere at different heating rates. TG curves showed that the thermal decomposition of composites occurred in one weight‐loss stage. The apparent activation energies of thermal decomposition for composites, as determined by the Tang method (TM), the Kissinger–Akahira–Sunose method (KAS), the Flynn–Wall–Ozawa method (FWO), and the Coats–Redfern (CR) method were 156.6, 156.0, 159.8, and 167.7 kJ.mol^?1 for the thermal decomposition of composite with 5 wt% CaCO₃, 191.5, 190.8, 193.1, and 196.8 kJ.mol^?1 for the thermal decomposition of composite with 10 wt% CaCO₃, and 206.3, 206.1, 207.5, and 203.8 kJ mol^?1 for the thermal decomposition of composite with 20 wt% CaCO₃, respectively. The most likely decomposition process for weight‐loss stages of composites with CaCO₃ content 5 and 10 wt% was an A_n sigmoidal type. However, the most likely decomposition process for composite with CaCO₃ content 20 wt% was an R_n contracted geometry shape type in terms of the CR and master plots results. It was also found that the thermal stability, activation energy, and thermal decomposition process were changed with the increase in the CaCO₃ filler weight in composite structure. Copyright © 2009 John Wiley & Sons, Ltd.