PIV measurements in a weakly separating and reattaching turbulent boundary layer

A high Reynolds number flat plate turbulent boundary layer was studied in a wind-tunnel experiment using particle image velocimetry (PIV). The flow is subjected to an adverse pressure gradient (APG) which is designed such that the boundary layer separates and reattaches, forming a weak separation bubble. With PIV we are able to get a more complete picture of this complex flow phenomenon. The view of a separation bubble being composed of large scale coherent regions of instantaneous backflow occurring randomly in a three-dimensional manner in space and time is verified by the present PIV measurements. The PIV database was used to test the applicability of various velocity scalings around the separation bubble. We found that the mean velocity profiles in the outer part of the boundary layer, and to some extent also the Reynolds shear-stress, are self-similar when using a velocity scale based on the local pressure gradient. The same can be said for the so called Perry–Schofield scaling, which suggests that the two velocity scales are connected. This can also be interpreted as an experimental evidence of the claimed relation between the latter velocity scale and the maximum Reynolds shear-stress.     

Turbulent separated reattached flow in a two-dimensional curved-wall diffuser

A turbulent separation-reattachment flow in a two-dimensional asymmetrical curved-wall diffuser is studied by a two-dimensional laser doppler velocimeter. The turbulent boundary layer separates on the lower curved wall under strong pressure gradient and then reattaches on a parallel channel. At the inlet of the diffuser, Reynolds number based on the diffuser height is 1.2×10⁵ and the velocity is 25.2m/s. The results of experiments are presented and analyzed in new defined streamline-aligned coordinates. The experiment shows that after Transitory Detachment Reynolds shear stress is negative in the near-wall backflow region. Their characteristics are approximately the same as in simple turbulent shear layers near the maximum Reynolds shear stress. A scale is formed using the maximum Reynolds shear stresses. It is found that a Reynolds shear stress similarity exists from separation to reattachment and the Schofield-Perry velocity law exists in the forward shear flow. Both profiles are used in the experimental work that leads to the design of a new eddy-viscosity model. The length scale is taken from that developed by Schofield and Perry. The composite velocity scale is formed by the maximum Reynolds shear stress and the Schofield-Perry velocity scale as well as the edge velocity of the boundary layer. The results of these experiments are presented in this paper.     

Influence of adverse pressure gradient on rough-wall turbulent flows

This paper presents an experimental investigation of adverse pressure gradient turbulent flow over two rough surfaces and a reference smooth surface. The adverse pressure gradient was produced in an asymmetric diffuser whose opening angle was 3°. The rough surfaces comprised sand grains and gravels of nominal mean diameters of 1.55 mm and 4.22 mm, respectively. The tests were conducted at an approach flow velocity of 0.5 m/s and the momentum thickness Reynolds number varied from 900 to 3000. A particle image velocimetry technique was used for the velocity measurements. Profiles of the mean velocity, turbulent intensities, Reynolds stress ratios, mixing length, eddy viscosity and the production terms were then obtained to document the effects of adverse pressure gradient (APG) on low Reynolds number rough-wall turbulent boundary layers. The results indicate that APG thickens the boundary layer and roughness sublayer. The APG and surface roughness also enhanced the production of turbulence as well as the turbulence level when compared with the smooth-wall data.     

Turbulent flow in a conical diffuser: A review

This is a review of experimental studies of turbulent flow in a conical diffuser by eight Ph.D. students, eleven M.Sc. students, one M.Eng. student, and myself in the past 29 years. During this time, two conical diffusers were constructed: the first was of cast aluminum construction, and the second was of plastic fabrication. These two diffusers were basically the same in geometry except that the pipe section was constructed as an integral part of the plastic diffuser to avoid the lip at the junction of the inlet pipe and the diffuser. The conical diffuser had a total divergence angle of 8°, an area ratio of 4:1, and an inlet diameter of 0.1016 m (4 in.).

The flow at the inlet of the diffuser was usually fully developed pipe flow, but sometimes it was boundary layer grown on the pipe wall. Hot-wire and pulse-wire anemometry together with computer facilities were used to obtain the results of complex flow present in the conical diffuser. Mean velocity profiles were obtained throughout the diffuser, which in turn were used to obtain strain rates and their principal direction. Turbulence moments up to fourth order were measured. The results were used to assess momentum, turbulent kinetic energy, and shear stress equations. Other features such as instantaneous flow reversals in the wall region, relative strength of large eddies, extra strain rate, and the production of kinetic energy also were investigated to find the dynamical picture in the diffuser flow.     

Aerodynamics and heat transfer in a separated flow in an axisymmetric diffuser with sudden expansion

Results of a numerical study of the influence of a positive pressure gradient in an axisymmetric diffuser with sudden expansion of a circular tube on aerodynamics and turbulent heat transfer in regions of flow separation, reattachment, and relaxation are reported. The air flow prior to separation is assumed to be fully turbulent and to have a constant Reynolds number Re _D1 = 2.75 · 10⁴. The tube expansion degree is 1.78, and the apex half-angle of the diffuser is varied from 0 to 5°. It is found that an increase in the pressure gradient leads to a decrease in the heat transfer intensity in the separation region, and the maximum heat release point moves away from the flow separation point. The calculated results are compared with experimental data. It is shown that the behavior of the separated flow behind the step becomes significantly different as the streamwise pressure gradient changes.     

Numerical prediction of turbulent flow in a conical diffuser usingk-ε model

Fully developed incompressible turbulent flow in a conical diffuser having a total divergence angle of 8° and an area ratio of 4∶1 has been simulated by ak-ε turbulence model with high Reynolds number and adverse pressure gradient. The research has been done for pipe entry Reynolds numbers of 1.16×10⁵ and 2.93×10⁵. The mean flow velocity and turbulence energy are predicted successfully and the advantage of Boundary Fit Coordinates approach is discussed. Furthermore, thek-ε turbulence model is applied to a flow in a conical diffuser having a total divergence angle of 30° with a perforated screen. A simplified mathematical model, where only the pressure drop is considered, has been used for describing the effect of the perforated screen. The optimum combination of the resistance coefficient and the location of the perforated screen is predicted for high diffuser efficiency or the uniform velocity distribution.     

Computing axisymmetric,laminar internal flows

A simple computational scheme is developed to compute laminar flows inside axisymmetric ducts. It is based on the Keller box method where the equations are approximated at the centre of the downstream face of each computational box. The coupling between the pressure gradient and the velocities for internal flow has been observed to introduce stability problems for the Keller box method that are not present for external, boundary layer flow problems. The difference scheme for the velocities is coupled to an iterative scheme to solve for the pressure gradient at each axial step. Example results for developing flow in a pipe and in a 2° conical diffuser are presented.     

Oscillating flow in a 2-D diffuser

Separating oscillating flows in an internal, adverse pressure gradient geometry are studied experimentally. Simultaneous velocity and pressure measurements demonstrate that the minor losses associated with oscillating flow in an adverse pressure gradient geometry can be smaller or larger than those for steady flow. Separation is found to begin high in the diffuser and propagate downward. The flow is able to remain attached further into the diffuser with larger Reynolds numbers, small displacement amplitudes, and smaller diffuser angles. The extent of separation grows with L ₀/h. The minor losses grow with increasing displacement amplitude in the measured range 10 < L ₀/h < 40. Losses decrease with increasing Re _δ in the measured range of 380 < Re _δ < 740. It is found that the losses increase with increasing diffuser angle over the measured range of 12° < θ < 30°. The nondimensional acoustic power dissipation increases with Reynolds number in the measured range and decreases with displacement amplitude.     

Effect of an adverse pressure gradient on the streamwise Reynolds stress profile maxima in a turbulent boundary layer

It is widely accepted that in a turbulent boundary layer （TBL） with adverse pressure gradient （APG） an outer peak usually appears in the profile of streamwise Reynolds stress. However, the effect of APG on this outer peak is not clearly understood. In this paper, the effect of APG is analysed using the numerical and experimental results in the literature. Because the effect of upstream flow is inherent in the TBL, we first analyse this effect in TBLs with zero pressure gradient on flat plates. Under the individual effect of upstream flow, an outer peak already appears in the profile of streamwise Reynolds stress when the TBL continues developing in the streamwise direction. The APG accelerates the appearance of the outer peak, instead of being a trigger.     

Near-wall behaviors of oblique-shock-wave/turbulent-boundary-layer interactions

A direct numerical simulation(DNS) on an oblique shock wave with an incident angle of 33.2?impinging on a Mach 2.25 supersonic turbulent boundary layer is performed. The numerical results are confirmed to be of high accuracy by comparison with the reference data. Particular efforts have been made on the investigation of the near-wall behaviors in the interaction region, where the pressure gradient is so significant that a certain separation zone emerges. It is found that, the traditional linear and logarithmic laws, which describe the mean-velocity profiles in the viscous and meso sublayers,respectively, cease to be valid in the neighborhood of the interaction region, and two new laws of the wall are proposed by elevating the pressure gradient to the leading order. The new laws are inspired by the analysis on the incompressible separation flows, while the compressibility is additionally taken into account. It is verified by the DNS results that the new laws are adequate to reproduce the mean-velocity profiles both inside and outside the interaction region. Moreover, the normalization adopted in the new laws is able to regularize the Reynolds stress into an almost universal distribution even with a salient adverse pressure gradient(APG).     

Riblet drag reduction in mild adverse pressure gradients: A numerical investigation

Riblet films are a passive method of turbulent boundary layer control that can reduce viscous drag. They have been studied with great detail for over 30 years. Although common riblet applications include flows with Adverse Pressure Gradients (APG), nearly all research thus far has been performed in channel flows. Recent research has provided motivation to study riblets in more complicated turbulent flows with claims that riblet drag reduction can double in mild APG common to airfoils at moderate angles of attack. Therefore, in this study, we compare drag reduction by scalloped riblet films between riblets in a zero pressure gradient and those in a mild APG using high-resolution large eddy simulations. In order to gain a fundamental understanding of the relationship between drag reduction and pressure gradient, we simulated several different riblet sizes that encompassed a broad range of s⁺ (riblet width in wall units), similarly to many previously published experimental studies. We found that there was only a slight improvement in drag reduction for riblets in the mild APG. We also observed that peak values of streamwise turbulence intensity, turbulent kinetic energy, and streamwise vorticity scale with riblet width. Primary Reynolds shear stresses and turbulence kinetic energy production however scale with the ability of the riblet to reduce skin-friction.     

Effects of Reynolds number on physiological‐type pulsatile flows in a pipe with ring‐type constrictions

The effects of Reynolds number on the physiological‐type of laminar pulsatile flow fields within the vicinity of mechanical ring‐type constriction in small pipes were studied numerically. The parameters considered are: the Reynolds number (Re) in the range of 50–1500; Strouhal number (St) in the range of 0.00156–3.98; Womersley number (Nw) from 0.0 to 50.0. The pulsatile flows considered were physiological‐type of simulated flows. Within a pulsating cycle, detailed flow characteristics were studied through the pulsating contours of streamline (ψ), vorticity (Ω), shear stress (τ) and isobar. The relations between the instantaneous flow rate (Q) and instantaneous pressure gradients (dp/dz) are observed to be elliptic. The relations between the instantaneous flow rate (Q) and pressure loss (P_loss) are quadratic. Linear relations were observed between the instantaneous flow rate (Q) and the maximum velocity, maximum vorticity and maximum shear stress. The Reynolds number of the flow in a pulsating cycle was found to have significant effects on the recirculation length and the pressure gradient within the pulsatile flow regime. Copyright © 1999 John Wiley & Sons, Ltd.     

The Influence of Periodic Excitation on a Turbulent Separation Bubble

Turbulent separation limits the performance in many engineering applications, for example creating pressure losses in diffuser like flows or stall on aircraft wings. In the present study the turbulent boundary layer flow over a flat plate separating due to an adverse pressure gradient is studied as a model problem and the effect of periodic excitation in both time and space is investigated through direct numerical simulations. Linear stability analysis is used to analyse the sensitivity of the flow with respect to time-periodic excitations. The dependence on position, amplitude and frequency of the forcing is investigated. For a certain frequency range at sufficiently high amplitudes, it is possible to eliminate the separated region. Furthermore, three-dimensional effects are studied by applying a steady spanwise forcing as well as a both time-dependent and spanwise varying forcing. A forcing varying in spanwise direction is shown to be the most effective in eliminating the separated region, whereas two-dimensional time-periodic excitation was not as efficient as it was expected.     

Sensitivity of an asymmetric 3D diffuser to vortex-generator induced inlet condition perturbations

Modifications of the turbulent separated flow in an asymmetric three-dimensional diffuser due to inlet condition perturbations were investigated using conventional static pressure measurements and velocity data acquired using magnetic resonance velocimetry (MRV). Previous experiments and simulations revealed a strong sensitivity of the diffuser performance to weak secondary flows in the inlet. The present, more detailed experiments were conducted to obtain a better understanding of this sensitivity. Pressure data were acquired in an airflow apparatus at an inlet Reynolds number of 10,000. The diffuser pressure recovery was strongly affected by a pair of longitudinal vortices injected along one wall of the inlet channel using either dielectric barrier discharge plasma actuators or conventional half-delta wing vortex generators. MRV measurements were obtained in a water flow apparatus at matched Reynolds number for two different cases with passive vortex generators. The first case had a pair of counter-rotating longitudinal vortices embedded in the boundary layer near the center of the expanding wall of the diffuser such that the flow on the outsides of the vortices was directed toward the wall. The MRV data showed that the three-dimensional separation bubble initially grew much slower causing a rapid early reduction in the core flow velocity and a consequent reduction of total pressure losses due to turbulent mixing. This produced a 13% increase in the overall pressure recovery. For the second case, the vortices rotated in the opposite sense, and the image vortices pushed them into the corners. This led to a very rapid initial growth of the separation bubble and formation of strong swirl at the diffuser exit. These changes resulted in a 17% reduction in the overall pressure recovery for this case. The results emphasize the extreme sensitivity of 3D separated flows to weak perturbations.     

Flow characteristics in the downstream region of a conical diffuser

Using the Navier-Stokes equations in conjunction with the k-? model of turbulence, the characteristics of flow in the region downstream of a conical diffuser with 5° angle of inclination are calculated. Two representative stations 1D₂ and 10D₂ after the diffuser exit are selected for comparison against experimental results. The calculations indicate an underestimation of mean velocity and turbulence kinetic energy at the first station, while satisfactory agreement is obtained for the mean velocity at the second station. The use of a modified k-? model sensitive to adverse pressure conditions improves the predictions considerably. The effect of inlet properties and Reynolds number on the flow characteristics at the above stations is studied using various inlet profiles and a range of Reynolds numbers based on the inlet diameter from 50 000 to 280 000.     

Higher-order moments and spectra of velocity fluctuations in adverse-pressure-gradient turbulent boundary layer

The characteristics of turbulent boundary layer flows with adverse pressure gradients (APGs) differ significantly from those of canonical boundary layers. We have investigated the effects of an APG on the higher-order moments and spectra of velocity fluctuations. The local wavelet spectra reveal a large difference in energy-containing frequencies of streamwise and wall-normal components of turbulent velocities, which results in smaller Reynolds shear stress production. Moreover, an analysis of bispectra in the Fourier space has revealed that non-local interactions, consisting of streamwise fluctuating velocity with low frequency and wall-normal velocity with high frequency, occur in the APG flow. However, the small-scale motions are not affected by imposing an APG.     

The effect of Reynolds number on boundary layer turbulence

A new facility for studying high Reynolds number incompressible turbulent boundary layer flows has been constructed. It consists of a moderately sized wind tunnel, completely enclosed by a pressure vessel, which can raise the ambient air pressure in and around the wind tunnel to 8 atmospheres. This results in a Reynolds number range of about 20:1, while maintaining incompressible flow. Results are presented for the zero pressure gradient flat plate boundary layer over a momentum thickness Reynolds number range 1500–15?000. Scaling issues for high Reynolds number non-equilibrium boundary layers are discussed, with data comparing the three-dimensional turbulent boundary layer flow over a swept bump at Reynolds numbers of 3800 and 8600. It is found that successful prediction of these types of flows must include length scales which do not scale on Reynolds number, but are inherent to the geometry of the flow.     

Direct Numerical Simulation and Theory of a Wall-Bounded Flow with Zero Skin Friction

We study turbulent plane Couette-Poiseuille (CP) flows in which the conditions (relative wall velocity ΔU _w ≡ 2U _w , pressure gradient dP/dx and viscosity ν) are adjusted to produce zero mean skin friction on one of the walls, denoted by APG for adverse pressure gradient. The other wall, FPG for favorable pressure gradient, provides the friction velocity u _τ , and h is the half-height of the channel. This leads to a one-parameter family of one-dimensional flows of varying Reynolds number Re ≡ U _w h/ν. We apply three codes, and cover three Reynolds numbers stepping by a factor of two each time. The agreement between codes is very good, and the Reynolds-number range is sizable. The theoretical questions revolve around Reynolds-number independence in both the core region (free of local viscous effects) and the two wall regions. The core region follows Townsend’s hypothesis of universal behavior for the velocity and shear stress, when they are normalized with u _τ and h; on the other hand universality is not observed for all the Reynolds stresses, any more than it is in Poiseuille flow or boundary layers. The FPG wall region obeys the classical law of the wall, again for velocity and shear stress. For the APG wall region, Stratford conjectured universal behavior when normalized with the pressure gradient, leading to a square-root law for the velocity. The literature, also covering other flows with zero skin friction, is ambiguous. Our results are very consistent with both of Stratford’s conjectures, suggesting that at least in this idealized flow turbulence theory is successful like it was for the classical logarithmic law of the wall. We appear to know the constants of the law within a 10% bracket. On the other hand, that again does not extend to Reynolds stresses other than the shear stress, but these stresses are passive in the momentum equation.