Novel pH sensitive block copolymer micelles for solvent free drug loading

Novel pH sensitive biodegradable block copolymers (MPEG-PDLLA-OSM) composed of mono-methoxy poly(ethylene glycol) (MPEG), poly (D,L-lactide) (PDLLA) and sulfamethazine oligomer (OSM) were synthesized via ring-opening polymerization and a dicyclohexyl carboimide (DCC) coupling reaction. These copolymers had a relatively low critical micelle concentration (CMC) due to the strong hydrophobic properties of non-ionized OSM at pH 7.0. Also, the pH sensitive block copolymers showed the micelle-unimer transition due to the ionization-non-ionization of OSM in the pH range (pH 7.2-8.4) above the CMC. Due to the pH sensitive properties of the block copolymer, the hydrophobic drug paclitaxel (PTX) was incorporated into a pH sensitive block copolymer micelle by the pH induced micellization method, without using an organic solvent. The block copolymer micelle prepared by pH induced micellization showed a relatively high PTX loading efficiency, and good stability for 2 d at 37 degrees C. Furthermore, the PTX loaded micelle showed a sustained release of PTX with a small burst in vitro over 2 d. The present results suggest that the pH induced micellization method due to the micelle-unimer transition of the pH sensitive block copolymer would be a novel and valuable drug incorporation tool for hydrophobic and protein drugs, since no organic solvent is involved in the formulation.     

Molecule-responsive block copolymer micelles

Ring-opening metathesis polymerization was used to generate an ABC triblock copolymer, containing complementary diamidopyridine (DAP) and thymine (THY) outer blocks, which assembles into spherical aggregates held together by DAP-THY noncovalent interactions. Addition of THY-containing small guest molecules results in complete opening and deaggregation of the block copolymer micelle. This molecular recognition and macroscopic response shows high selectivity to the guest structure, and tolerates only a small amount of conformational mobility in the THY guest. On the other hand, addition of a small DAP-containing guest does not break the aggregates, but instead, results in new micelles which show a different selectivity profile from the parent morphology. We have examined the effect of a number of structural features in the block copolymers, on both the extent and selectivity of their macroscopic response to guests (that is, opening of the micelle). This study has resulted in a set of structural guidelines, which help in the design of effective molecule-responsive micelles for applications in selective drug delivery, sensing, and surface patterning.     

Block copolymer micelles conjugated with anti‐EGFR antibody for targeted delivery of anticancer drug

Antiepidermal growth factor receptor antibody (anti‐EGFR antibody) was conjugated with the block copolymer micelle based on poly(ethylene glycol) (PEG) and poly(ε‐caprolactone) (PCL) for active targeting to EGFR overexpressing cancer cells. Doxorubicin (DOX) was encapsulated in the core of the block copolymer (MePEG‐b‐PCL) micelle (DOX‐micelle). The mean diameters of the DOX‐micelle and the anti‐EGFR‐PEG‐b‐PCL copolymer micelles loaded with DOX (DOX‐anti‐EGFR‐micelle) were about 25 and 31 nm, respectively. The RKO human colorectal cancer cells expressing moderate degree of EGFR were incubated with free DOX, DOX‐micelle, or DOX‐anti‐EGFR‐micelle to study the distribution of DOX in the cells. When cells were incubated with free DOX, moderate degree of DOX fluorescence was observed in the nuclei. In the cells treated with DOX‐micelle, the DOX fluorescence intensity in the cytoplasm was much greater than that in the nuclei. On the other hand, the nuclei of the cells treated with DOX‐anti‐EGFR‐micelle exhibited DOX fluorescence intensity similar to that in the cytoplasm. The cytotoxicity of DOX‐anti‐EGFR‐micelle to induce apoptosis in RKO cells was significantly greater than that of free DOX or DOX‐micelle. These results demonstrated that the presence of anti‐EGFR antibody on the DOX‐micelle surface (DOX‐anti‐EGFR‐micelle) increased the internalization of the DOX‐micelle and nuclear accumulation of DOX, and enhanced the DOX‐induced cell death. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7321–7331, 2008     

Control of block copolymer morphology: An example of selective morphology induced by self‐assembly formation condition

An example case of selective morphology by simply varying pH and heating profile based on a diblock copolymer, i.e., poly(N‐isopropylacrylamide) (PNIPAAM) and poly[2‐(dimethylamino)ethyl acrylate] (PDMAEA) is reported. A variation of pH induces an aggregation of the block copolymers in either micelles or vesicles. In a subsequent step, temperature variation triggers the formation of vesicular structures. This demonstrates not only the temperature but also the heating rate that tunes the nanostructures from micelles to vesicles. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Micelles and reverse micelles with a photo and thermo double‐responsive block copolymer

A novel photo and thermo double‐responsive block copolymer was developed to fabricate micelles and reverse micelles in aqueous solution. The block copolymer was synthesized by ATRP block copolymerization of a spiropyran‐ containing methacrylate (SPMA) with di(ethylene glycol) methyl ether methacrylate (DEGMMA). By facile control of the photo irradiation and solution temperature, PSPMA‐core and PDEGMMA‐core micelles can be obtained, respectively. The thermo‐ and photo‐responsive micelles were used as smart polymeric nanocarriers for controlled encapsulation, triggered release, and re‐encapsulation of model drug coumarin 102. The double‐responsive self‐assembly and disassembly were tracked by dynamic light scattering, transmission electron microscopy, and fluorescence spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2855–2861, 2010     

UV‐induced crosslinking of ring opening metathesis block copolymer micelles

Statistical and amphiphilic block copolymers bearing cinnamoyl groups were prepared by ring opening metathesis polymerization (ROMP). The UV‐induced [2 + 2] cycloaddition reaction of polymer bound cinnamic acid groups was studied in polymer thin films as well as in block copolymer micelles. In both cases, exposure to UV‐light for 10 min led to a crosslinking conversion of about 60%, as determined by FT‐IR spectroscopy and UV–vis absorption measurements. Time based IR‐spectroscopy revealed a maximum conversion of 78% reached after an irradiation time of about 16 min. For micelles obtained from polymers bearing 5 mol % or more cinnamoyl groups, the crosslinking reaction proceeded smoothly, yielding in crosslinked particles which were stable in a non‐selective solvent (CHCl₃). Diameters determined by dynamic light scattering in the selective solvent (MeOH) were similar for both, non‐crosslinked and crosslinked micelles, whereas diameters of crosslinked micelles in the non‐selective solvent (CHCl₃) were significantly larger compared to MeOH samples. This strategy of direct self assembly of block‐copolymers in a selective solvent followed by “clean” crosslinking, without the need for additional crosslinking reagents or crosslinking initiators, provides a straight forward approach toward ROMP‐based polymeric nano‐particles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2402–2413, 2008     

pH‐responsive destabilization and facile bioconjugation of new hydroxyl‐terminated block copolymer micelles

New hydroxyl‐terminated amphiphilic block copolymers (HO‐ABPs) having pendant t‐butyl groups for pH‐responsiveness and terminal OH groups for bioconjugation are reported. These HO‐ABPs consist of hydrophilic poly(oligo(ethylene oxide) monomethyl ether methacrylate) and hydrophobic poly(t‐butyl methacrylate) blocks and were synthesized by a consecutive atom transfer radical polymerization in the presence of an OH‐terminated bromine initiator. Aqueous self‐assembly of HO‐ABPs resulted in colloidally stable micellar aggregates being capable of encapsulating hydrophobic guest molecules. They were nontoxic to cells and destabilized in response to low pH. A facile bioconjugation of HO‐ABP micelles for active targeting is demonstrated by conjugation with biotin (vitamin H) and competitive assay exhibiting >93% ABP chains conjugated with biotin in each micelle. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Dual‐responsive crosslinked micelles of a multifunctional graft copolymer for drug delivery applications

A novel multifunctional amphiphilic graft copolymer has been synthesized consisting of a biodegradable poly(l ‐aspartic acid) backbone that was decorated by water‐soluble poly(ethylene glycol) (PEG) and pH‐responsive poly(N,N‐diethylaminoethyl methacrylate) (PDEAEMA) side‐chains as well as thiol pendant groups. This graft copolymer together with doxorubicin (DOX) formed micelles in water at pH = 10.0 with PDEAEMA and DOX acting as the core and PEG serving as the micellar corona. Upon oxidation, the thiol groups dimerized to form disulfide bonds, thus “locking in” the micellar structure. These crosslinked micelles expanded as the pH was decreased from 7.4 to 5.0 or upon the addition, at pH = 7.4, of glutathione (GSH), a thiol‐containing oligopeptide that is present in cancerous cells and cleaves disulfide bonds. At pH = 5.0, GSH addition triggered the disassembly of the micelles. The expansion and disassembly of the micelles have been determined via in vitro experiments to evaluate their DOX release behavior. More importantly, the graft copolymer micelles could enter cells by means of endocytosis and deliver DOX to the nuclei of ovarian cancer BEL‐7402 cells. Thus, this polymer and its micelles are promising candidates for drug delivery applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1536–1546     

Complexes of cationic block copolymer micelles with DNA: histone/DNA complex mimetics

The formation of complexes between cationic polymeric micelles of PS-b-PQ2VP amphiphilic block copolymers and DNA molecules in aqueous solutions is investigated at pH = 7. The physicochemical characteristics of the "polyplexes" at different DNA/polymer ratios were characterized in terms of mass, size and charge using static, dynamic and electrophoretic light scattering and AFM. The complexes are spherical and assume their maximum size and mass around the charge stoichiometric ratio. After addition of increased amounts of salt in the solutions, partial dissociation of the systems was observed. The present systems can be considered as mimetics of histone/DNA complexes formed under physiological conditions in living cells.     

Metallo‐supramolecular block copolymer micelles: Improved preparation and characterization

Micelles prepared from amphiphilic block copolymers in which a poly(styrene) segment is connected to a poly(ethylene oxide) block via a bis‐(2,2′:6′,2″‐terpyridine‐ruthenium) complex have been intensely studied. In most cases, the micelle populations were found to be strongly heterogeneous in size because of massive micelle/micelle aggregation. In the study reported in this article we tried to improve the homogeneity of the micelle population. The variant preparation procedure developed, which is described here, was used to prepare two “protomer”‐type micelles: PS₂₀‐[Ru]‐PEO₇₀ and PS₂₀‐[Ru]‐PEO₃₇₅. The dropwise addition of water to a solution of the compounds in dimethylformamide was replaced by the controlled addition of water by a syringe pump. The resulting micelles were characterized by sedimentation velocity and sedimentation equilibrium analyses in an analytical ultracentrifuge and by transmission electron microscopy of negatively stained samples. Sedimentation analysis showed virtually unimodal size distributions, in contrast to the findings on micelles prepared previously. PS₂₀‐[Ru]‐PEO₇₀ micelles were found to have an average molar mass of 318,000 g/mol (corresponding to 53 protomers per micelle, which is distinctly less than after micelle preparation by the standard method) and an average hydrodynamic diameter (d_h) of 18 nm. For PS₂₀‐[Ru]‐PEO₃₇₅ micelles, the corresponding values were M = 603,000 g/mol (31 protomers per micelle) and d_h = 34 nm. The latter particles were found to be identical to the “equilibrium” micelles prepared in pure water. Both micelle types had a very narrow molar mass distribution but a much broader distribution of s values and thus of hydrodynamic diameters. This indicates a conformational heterogeneity that is stable on the time scale of sedimentation velocity analysis. The findings from electron microscopy were in disagreement with those from the sedimentation analysis both in average micelle diameter and in the width of the distributions, apparently because of imperfections in the staining procedure. The preparation procedure described also may be useful in micelle formation from other types of protomers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4458–4465, 2004     

Practical implementation of order parameter calculation for directed assembly of block copolymer thin films

A computational procedure is presented to quantify the order achieved in assembled block copolymer films when no disruptive defects are present (i.e., dislocations or disclinations). Both simulated and real systems were used to show that sub‐nm variation in the domain position, as well as the corresponding reciprocal lattice vectors, can reduce the accuracy in the quantification of the order of the system. The computational procedure in this work was based on fitting to the measured spatial location of the domain centroids, and incorporated a tolerance factor to account for domain position variation. The procedure was used to analyze the translational and orientational order parameters of block copolymer films assembled on a chemical pattern as well as their corresponding autocorrelation functions. The procedure was applied to a patterned substrate during three stages of a template forming process: an e‐beamed patterned photoresist, the domains of a block copolymer directed to assemble on this pattern, and the underlying structure after lift‐off. Use of the procedure demonstrated that the order of the block copolymer film could be retained in subsequent processing of the underlying template. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Biomimetic pH/redox dual stimuli‐responsive zwitterionic polymer block poly(L‐histidine) micelles for intracellular delivery of doxorubicin into tumor cells

A series of pH/redox dual stimuli‐responsive poly(2‐methacryloyloxyethyl phosphorylcholine)₂₅‐block‐poly(l ‐histidine)_n (p[MPC])₂₅‐b‐p[His]_n, n = 20, 35, 50, and 75) copolymers consisting of a pH‐responsive p(His)_n block and a biocompatible phospholipid analog p(MPC) block connected by a redox‐responsive disulfide linker have been synthesized. The block copolymers are self‐assembled into uniform micelles (～100 nm) in which doxorubicin (Dox) is efficiently encapsulated. The in vitro release profile shows an enhanced release of Dox at low pH (5.0) in 10 mM glutathione (GSH). The in vitro cell viability assays performed using various cell lines show that the blank hybrid micelles have no acute or intrinsic toxicity. A pH‐dependent cytotoxicity is observed with the Dox‐loaded micelles, especially at pH 5.0. Moreover, confocal microscopy images and flow cytometry results show the pH‐dependent cellular uptake of Dox‐loaded micelles. Therefore, the Dox‐loaded micelles can be considered a good candidate for cancer therapy. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2061–2070     

Light scattering study of solubilization of organic molecules by block copolymer micelles in aqueous media

Block copolymers, when dissolved in a selective solvent, form spherical micelles. These micelles can selectively solubilize organic molecules otherwise insoluble in the pure solvent. In this study, we report solubilization of organic molecules by styrene-methacrylic acid block copolymer micelles in aqueous buffers. A light scattering technique was developed to determine the extent of micellar solubilization. Our results indicate that the extent of micellar solubilization depends on the chemical nature of organic molecules, specifically, on the interactions between the organic compound and polystyrene. A thermodynamic model has been developed to describe micellar solubilization. The theoretical calculation agrees reasonably well with the experimental results for two micellar samples examined. ©1995 John Wiley & Sons, Inc.     

Novel double hydrophilic block copolymers based on poly(p‐hydroxystyrene) derivatives and poly(ethylene oxide)

The synthesis of three series of double hydrophilic block copolymers (DHBCs), consisting of poly(ethylene oxide) as the neutral water soluble block and a second polyelectrolyte block of variable chemistry, is described. The synthetic scheme involves the anionic polymerization of poly(p‐tert‐butoxystyrene‐b‐ethylene oxide) (PtBOS‐PEO) amphiphilic block copolymer precursors followed by the acidic hydrolysis of the hydrophobic poly(p‐tert‐butoxystyrene) (PtBOS) block to an annealed anionic polyelectrolyte poly(p‐hydroxystyrene) (PHOS) block. The PHOS block was subsequently transformed into a high charge density annealed cationic polyelectrolyte namely poly[3,5‐bis(dimethylaminomethylene) hydroxystyrene] (NPHOS), via aminomethylation. Finally, the NPHOS block was transformed into a quenched polyelectrolyte, namely quaternized poly[3,5‐bis(dimethylaminomethylene) hydroxystyrene] (QNPHOS) block by reaction with CH₃I. The solution properties of the different series of the above block polyelectrolyte copolymers have been investigated using static, dynamic and electrophoretic light scattering, turbidimetry, and fluorescence spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5790–5799, 2007     

Improved numerical algorithm for exploring block copolymer mesophases

We present an improved algorithm of the self‐consistent mean‐field implementation that has been recently proposed for the calculation of block copolymer self‐assembly. Without requiring prior knowledge of the symmetry of the mesophase segregation, the algorithm is numerically stable and significantly faster than previously proposed methods. These advantages provide a valuable tool for combinatorial screening of novel stable and metastable structural phases of block copolymers. We apply the method and demonstrate complex mesophases in linear, asymmetric triblock copolymer melts. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1777–1783, 2002     

Preparation of block copolymer vesicles in solution

Block copolymer vesicles can be prepared in solution from a variety of different amphiphilic systems. Polystyrene‐block‐poly(acrylic acid), polystyrene‐block‐poly(ethylene oxide), and many other block copolymer systems can produce vesicles of a wide range of sizes; those in the range of 100–1000 nm have been explored extensively. Different factors, such as the absolute and relative block lengths, the presence of additives (ions, homopolymers, and surfactants), the water content in the solvent mixture, the nature and composition of the solvent, the temperature, and the polydispersity of the hydrophilic block, provide control over the types of vesicles produced. Their high stability, resistance to many external stimuli, and ability to package both hydrophilic and hydrophobic compounds make them excellent candidates for use in the medical, pharmaceutical, and environmental fields. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 923–938, 2004     

Complex micelles formed from two diblock copolymers for applications in controlled drug release

Double‐responsive core‐shell‐corona complex micelles for applications in drug release were formed from self‐assembly of two diblock copolymers PtBA‐b‐ PNIPAM and PtBA‐b‐P4VP. The two diblock copolymers coaggregated into core‐shell complex micelles in acidic water with the hydrophobic PtBA blocks as the common core and soluble PNIPAM/P4VP blocks as the mixed shell. Increasing temperature or pH value, the micelles converted into core‐shell‐corona micelles because of the collapse of PNIPAM or P4VP blocks as the inner shell and soluble P4VP or PNIPAM chains stretching outside as the outer corona. The anti‐inflammation drug naproxen (NAP) was loaded as the model drug in micelles in acidic water and released because of the ionization of NAP in alkaline solutions. Compared with pure core‐shell micelles, release of NAP from core‐shell‐corona complex micelles avoided the burst diffusion and the release rate is more easily controlled by tuning the composition of the mixtures or by adjusting the pH of the medium. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1804–1810, 2009     

Thermosensitive t‐PLA‐b‐PNIPAAm tri‐armed star block copolymer nanoscale micelles for camptothecin drug release

Thermosensitive polylactide‐block‐poly(N‐isopropylacrylamide) (t‐PLA‐b‐PNIPAAm) tri‐armed star block copolymers were synthesized by atom transfer radical polymerization (ATRP) of monomer NIPAAm using t‐PLA‐Cl as macroinitiator. The synthesis of t‐PLA‐Cl was accomplished by esterification of star polylactides (t‐PLA) with 2‐chloropropionyl chloride using trimethylolpropane as a center molecule. FT‐IR, ¹H NMR, and GPC analyses confirmed that the t‐PLA‐b‐PNIPAAm star block copolymers had well‐defined structure and controlled molecular weights. The block copolymers could form core‐shell micelle nanoparticles due to their hydrophilic‐hydrophobic trait in aqueous media, and the critical micelle concentrations (CMC) were from 6.7 to 32.9 mg L^?1, depending on the system composition. The as‐prepared micelle nanoparticles showed reversible phase changes in transmittance with temperature: transparent below low critical solution temperature (LCST) and opaque above the LCST. Transmission electron microscopy (TEM) observations revealed that the micelle nanoparticles were spherical in shape with core‐shell structure. The hydrodynamic diameters of the micelle nanoparticles depended on copolymer compositions, micelle concentrations and media. MTT assays were conducted to evaluate cytotoxicity of the camptothecin‐loaded copolymer micelles. Camptothecin drug release studies showed that the copolymer micelles exhibited thermo‐triggered targeting drug release behavior, and thus had potential application values in drug controlled delivery. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4429–4439