Nanotube and three-way nanotube formation with nonionic amphiphilic block peptides

Amphiphilic block polypeptides having a helical hydrophobic block with a uniform chain length and a hydrophilic nonionic block were newly synthesized and self-assembled into homogeneous nanotubes with ca. 60 nm diameter and ca. 200 nm length. The tubular assembly was shown to be elongated by heating over micrometer length without changing the diameter. Notably, a distinctive three-way nanotube was obtained just by mixing two kinds of amphiphilic polypeptides with the same helical hydrophobic block but different chain lengths of the hydrophilic block. The morphology of the molecular assemblies was shown to be tunable from a curved sheet-shaped assembly to a long or short nanotubular assembly and a three-way nanotubular assembly by suitable molecular design of the hydrophobic block, selection of the chain length of the hydrophilic block, mixing two-type block peptides, and processing such as heating.     

Formation of polymer vesicles by liquid crystal amphiphilic block copolymers

We report the formation of polymer vesicles (or polymersomes) by a new class of amphiphilic block copolymers in which the hydrophobic block is a side-on nematic liquid crystal polymer. Two series of these block copolymers, named PEG-b-PA444 and PEG-b-PMAazo444, with different hydrophilic/hydrophobic ratios were synthesized and characterized in detail. Polymersomes and nanotubes were formed by adding water into a solution of copolymers in dioxane. Polymersomes in water were finally obtained by dialyzing the resulting mixture against water. These self-assemblies have been studied by classical TEM and cryo-TEM. For the PEG-b-PA444 series, polymersomes were observed for hydrophilic/hydrophobic ratios ranging from 40/60 to 19/81. For PEG-b-PMAazo444 series, polymersomes were observed for hydrophilic/hydrophobic ratios ranging from 26/74 to 18/82. For a PEG-b-PA444 sample with hydrophilic/hydrophobic ratio equal to 25/75, a tubular morphology with tube diameter of typically 100 nm and tube length of up to 10 mum was also observed together with polymersomes during addition of water into the polymer solution in dioxane.     

How can azobenzene block copolymer vesicles be dissociated and reformed by light?

The underlying mechanism of UV light-induced dissociation and visible light-induced reformation of vesicles formed by an azobenzene diblock copolymer was investigated. These processes were studied in situ by monitoring changes in optical transmittance of the vesicular solution while being exposed to UV or visible light irradiation. The results indicate that the UV-induced dissociation of the vesicles results from their thermodynamic instability due to a shift of the hydrophilic/hydrophobic balance arising from the trans-cis isomerization, while their reaggregation takes place upon visible light irradiation that shifts the hydrophilic/hydrophobic balance in the opposite direction after the reverse cis-trans isomerization. The study suggests a specific design principle for obtaining UV light-dissociable and visible light-recoverable vesicles based on azobenzene block copolymers. On one hand, the structure of azobenzene moiety used in the hydrophobic block should have a small (near zero) dipole moment in the trans form and a significantly higher dipole moment in the cis form, which ensures a significant increase in polarity of the hydrophobic block under UV light irradiation. On the other hand, the hydrophilic block should be weakly hydrophilic. The conjunction of the two conditions can make the light-induced shift of the hydrophilic/hydrophobic balance important enough to lead to the reversible change in vesicular aggregation.     

Synthesis and characterization of amphiphilic diblock copolymers of methyl tri(ethylene glycol) vinyl ether and isobutyl vinyl ether

Water-soluble diblock copolymers of methyl tri(ethylene glycol) vinyl ether (hydrophilic block) and isobutyl vinyl ether (hydrophobic block) of different molecular weights and composition were synthesized by living cationic polymerization. The molecular weight and comonomer composition of these copolymers were determined by GPC and ¹H NMR spectroscopy, respectively. Aqueous solutions of the copolymers were characterized in terms of their micellar behavior using dynamic light scattering, aqueous GPC, and dye solubilization. All the copolymers formed aggregates with the exception of a diblock copolymer with only two hydrophobic monomer units. The micellar hydrodynamic size scaled with the 0.61 power of the number of hydrophobic units, in good agreement with a theoretical exponent of 0.73. An increase in the length of the hydrophobic block at constant hydrophilic block length or an increase in the overall polymer size at constant block length ratio both resulted in lower critical micelle concentrations (cmcs). The cloud points of 1% w/w aqueous solutions of the polymers were determined by turbidimetry. An increase in the length of the hydrophobic block at constant hydrophilic block length caused a decrease in the cloud points of the copolymers. However, an increase in the overall polymer size at constant block length ratio led to an increase in the cloud point. © 1996 John Wiley & Sons, Inc.     

Synthesis and characterization of multiblock copolymers based on hydrophilic disulfonated poly(arylene ether sulfone) and hydrophobic partially fluorinated poly(arylene ether ketone) for fuel cell applications

Sulfonated fluorinated multiblock copolymers based on high performance polymers were synthesized and evaluated for use as proton exchange membranes (PEMs). The multiblock copolymers consist of fully disulfonated poly(arylene ether sulfone) and partially fluorinated poly(arylene ether ketone) as hydrophilic and hydrophobic segments, respectively. Synthesis of the multiblock copolymers was achieved by a condensation coupling reaction between controlled molecular weight hydrophilic and hydrophobic oligomers. The coupling reaction could be conducted at relatively low temperatures (e.g., 105 °C) by utilizing highly reactive hexafluorobenzene (HFB) as a linkage group. The low coupling reaction temperature could prevent a possible trans‐etherification, which can randomize the hydrophilic‐hydrophobic sequences. Tough ductile membranes were prepared by solution casting and their membrane properties were evaluated. With similar ion exchange capacities (IECs), proton conductivity and water uptake were strongly influenced by the hydrophilic and hydrophobic block sequence lengths. Conductivity and water uptake increased with increasing block length by developing nanophase separated morphologies. Atomic force microscopy (AFM) and transmission electron microscopy (TEM) experiments revealed that the connectivity of the hydrophilic segments was enhanced by increasing the block length. The systematic synthesis and characterization of the copolymers are reported. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 214–222, 2010     

Selective hydrolysis of oxazoline block copolymers

Block copolymers, composed of a hydrophobic block [poly(N-t-butylbenzoyl ethylenimine) or poly(N-lauroyl ethylenimine)] and a hydrophilic block [poly(N-propionyl ethylenimine)], synthesized by cationic ring-opening polymerization of 2-substituted Δ2-oxazolines, were selectively deacylated by acid hydrolysis. The hydrolysis process was monitored by using ¹H-NMR. The results show that the propionyl groups could be removed from the hydrophilic block of the polymer chain without touching the hydrophobic block, if appropriate reaction conditions were used.     

New amphiphilic diblock copolymers: surfactant properties and solubilization in their micelles

Several series of amphiphilic diblock copolymers are investigated as macrosurfactants in comparison to reference low-molar-mass and polymeric surfactants. The various copolymers share poly(butyl acrylate) as a common hydrophobic block but are distinguished by six different hydrophilic blocks (one anionic, one cationic, and four nonionic hydrophilic blocks) with various compositions. Dynamic light scattering experiments indicate the presence of micelles over the whole concentration range from 10(-4) to 10 g x L(-1). Accordingly, the critical micellization concentrations are very low. Still, the surface tension of aqueous solutions of block copolymers decreases slowly but continuously with increasing concentration, without exhibiting a plateau. The longer the hydrophobic block, the shorter the hydrophilic block, and the less hydrophilic the monomer of the hydrophilic block is, the lower the surface tension is. However, the effects are small, and the copolymers reduce the surface tension much less than standard low-molar-mass surfactants. Also, the copolymers foam much less and even act as anti-foaming agents in classical foaming systems composed of standard surfactants. The copolymers stabilize O/W emulsions made of methyl palmitate as equally well as standard surfactants but are less efficient for O/W emulsions made of tributyrine. However, the copolymer micelles exhibit a high solubilization power for hydrophobic dyes, probably at their core-corona interface, in dependence on the initial geometry of the micelles and the composition of the block copolymers. Whereas micelles of copolymers with strongly hydrophilic blocks are stable upon solubilization, solubilization-induced micellar growth is observed for copolymers with moderately hydrophilic blocks.     

Synthesis and Self-Assembly Behaviors of Four-Arm Star Block Copolymers Poly(ϵ-caprolactone)-b-poly(2- (diethylamino) ethyl methacrylate)) in Aqueous Solution

Four-arm star block polymers consisting of hydrophobic poly(?-caprolactone) (PCL) block and hydrophilic poly(2-(diethylamino) ethyl methacrylate)) (PDEAEMA) block were successfully synthesized by ring opening polymerization (ROP) and atom transfer radical polymerization (ATRP). Chain lengths of PDEAEMA segments were varied to obtain a series of star copolymers with different hydrophilic/hydrophobic ratio, which were desired for self-assembly study. Dynamic light scattering (DLS) and transmission electron microscopic (TEM) were used to study their self-assembly behavior. In the PBS solution with different pH value, the star polymers formed micelles or nanoparticles. Furthermore, the morphologies of the micelles were also pH-dependent. Critical micelle concentrations of star copolymers changed from 5.0 to 17.5 mg/L with the increase of hydrophilic block length or the pH decrease. Moreover, a steady increase was found on the micelles diameters when the pH decreased from 7.0 to 3.0. The low CMC value and slight changes on micelle diameter indicated that the micelle remained stable under the changing external stimulus.     

Formation of block copolymer-protected nanoparticles via reactive impingement mixing

Reactive impingement mixing was employed to produce polymer-protected nanoparticles. Amphiphilic block copolymer was formed in situ by reactive coupling of hydrophobic and hydrophilic blocks. Simultaneously, a hydrophobic compound and the copolymer coprecipitated to form nanoparticles in the range of 100 nm. Specifically, beta-carotene was stabilized by the amphiphilic diblock copolymer, formed from the reaction of an amino-terminated hydrophilic block, poly(ethylene glycol) (PEG-NH2), with an acid chloride-terminated hydrophobic block, either poly(epsilon-caprolactone) (PCL-COCl) or polystyrene (PS-COCl). Spherical particles were observed by scanning and cryogenic transmission electron microscopy. Process conditions, including feed concentration of beta-carotene and feed concentrations of polymeric stabilizers, had little or no effect on average particle sizes over the range studied. Further, for Reynolds numbers greater than 500 the feed flow rates also had no effect. The effect of glass transition temperature (Tg) of the hydrophobic polymer on morphology and particle formation mechanism is discussed.     

Multicompartment micelles from silicone-based triphilic block copolymers

An amphiphilic linear ternary block copolymer was synthesised in three consecutive steps via reversible addition–fragmentation chain transfer polymerisation. Oligo(ethylene glycol) monomethyl ether acrylate was engaged as a hydrophilic building block, while benzyl acrylate and 3-tris(trimethylsiloxy)silyl propyl acrylate served as hydrophobic building blocks. The resulting “triphilic” copolymer consists thus of a hydrophilic (A) and two mutually incompatible “soft” hydrophobic blocks, namely, a lipophilic (B) and a silicone-based (C) block, with all blocks having glass transition temperatures well below 0 °C. The triphilic copolymer self-assembles into spherical multicompartment micellar aggregates in aqueous solution, where the two hydrophobic blocks undergo local phase separation into various ultrastructures as evidenced by cryogenic transmission electron microscopy. Thus, a silicone-based polymer block can replace the hitherto typically employed fluorocarbon-based hydrophobic blocks in triphilic block copolymers for inducing multicompartmentalisation.     

Multiblock copolymers of poly(2,5‐benzophenone) and disulfonated poly(arylene ether sulfone) for proton‐exchange membranes. I. Synthesis and characterization

Nanophase‐separated, hydrophilic–hydrophobic multiblock copolymers are promising proton‐exchange‐membrane materials because of their ability to form various morphological structures that enhance transport. A series of poly(2,5‐benzophenone)‐activated, telechelic aryl fluoride oligomers with different block molecular weights were successfully synthesized by the Ni(0)‐catalyzed coupling of 2,5‐dichlorobenzophenone and the end‐capping agent 4‐chloro‐4′‐fluorobenzophenone. These telechelic oligomers (hydrophobic) were then copolymerized with phenoxide‐terminated, disulfonated poly(arylene ether sulfone)s (hydrophilic) by nucleophilic, aromatic substitution to form hydrophilic–hydrophobic multiblock copolymers. High‐molecular‐weight multiblock copolymers with number‐average block lengths ranging from 3000 to 10,000 g/mol were successfully synthesized. Two separate glass‐transition temperatures were observed via differential scanning calorimetry in the transparent multiblock copolymer films when each block length was longer than 6000 g/mol. Tapping‐mode atomic force microscopy also showed clear nanophase separation between the hydrophilic and hydrophobic domains and the influence of the block length as it increased from 6000 to 10,000 g/mol. Transparent and creasable films were solvent‐cast and exhibited moderate proton conductivity and low water uptake. These copolymers are promising candidates for high‐temperature proton‐exchange membranes in fuel cells, which will be reported separately in part II of this series. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 284–294, 2007     

Polymeric vesicles with a hydrophobic interior formed by a thiophene-based all-conjugated amphiphilic diblock copolymer

The diblock copolymer, BP26, assembled into polymeric vesicles with double layers that formed a hydrophobic crystalline interior and a hydrophilic amorphous exterior in methanol, a selective solvent for the PEGT block. The vesicles were demonstrated to encapsulate a hydrophobic guest polyfluorene (PF).     

SYNTHESIS AND CHARACTERIZATION OF WATER-SOLUBLE BLOCK COPOLYMERS WITH AN END-TAGGED NAPHTHALENE PROBE

Water-soluble A-B block copolymers of 2-perfluoroethyl-2-oxazoline or 2-pentyl-2-oxazoline as hydrophobic monomers and 2-methyl-2-oxazoline as hydrophilic monomer were prepared by means of the living cationic ring-opening polymerization. The polymerization was initiated with N-methyl-2-(1-naphthyl)-2-oxazolinium trifluoromethanesulfonate as fluorescence label followed by sequential addition of the hydrophobic and the hydrophilic monomer. The polymerization was monitored by ¹H NMR spectroscopy and gel permeation chromatography (GPC) measurements. The results revealed that fluorophilic block copolymers can be prepared by this method while lipohilic block copolymers are not accessible by this monomer sequence. Micelle formation of the fluorophilic block copolymers in aqueous solution was studied by means of steady-state fluorescence spectroscopy which confirmed strong intermolecular excimer formation of the terminal bounded naphthalene moiety. In chloroform as a good solvent for both blocks, only monomer fluorescence could be observed.     

A new design for light-breakable polymer micelles

A new and general design strategy is presented for amphiphilic block copolymers whose micellar aggregates can be dissociated by light. A diblock copolymer composed of hydrophilic poly(ethylene oxide) (PEO) and a hydrophobic polymethacrylate bearing pyrene pendant groups (PPy) was synthesized using ATRP. Upon UV light irradiation of polymer micellar solutions, the photosolvolysis of pyrene moieties results in their detachment from the polymer and converts the hydrophobic PPy block into hydrophilic poly(methacrylic acid). This effect leads to complete dissociation of polymer micelles.     

Novel "star anise"-like nano aggregate prepared by self-assembling of preformed microcrystals from branched crystalline-coil alternating multi-block copolymer

Nano aggregates in aqueous medium with a novel "star anise"-like morphology were prepared from a branched alternating multi-block copolymer composed of 3-arm star-like hydrophobic poly(p-dioxanone) block and linear hydrophilic poly(ethylene glycol) block. The influence of block length on the morphology of the nano aggregate was investigated.     

Self-assembling of hydrophobic-hydrophilic copolymers in hydrophobic nanocylindrical tubes: formation of channels

By employing Monte Carlo simulations, the phase behavior of hydrophobic-hydrophilic copolymers confined in hydrophobic nanocylindrical tubes has been investigated by changing the hydrophobic-hydrophilic distribution, the ratio of the hydrophobic to hydrophilic segments, the hydrophobicity of the tube surface, and the tube diameter. The ratio of hydrophobic to hydrophilic segments, the number of blocks in a chain, and the number of segments in a block affected the generation of channels in the central region. Such channels were formed when the hydrophobicity of the tube surface was sufficiently strong for its attraction for the hydrophobic segments to overcome the attraction between the hydrophobic segments. When the numbers of hydrophobic and hydrophilic beads in a chain are constant, the number of blocks has opposite effects in small and large tubes. In the former, the formation of channels is stimulated by a larger number of blocks, while in the latter, it is stimulated by a smaller number of blocks.     

Hollow capsules prepared from all block copolymer micelle multilayers

We introduce a novel and versatile approach for preparing hollow multilayer capsules containing functional hydrophobic components. Protonated polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) and anionic polystyrene-block-poly(acrylic acid) (PS-b-PAA) block copolymer micelles (BCM) were used as building blocks for the layer-by-layer assembly of BCM multilayer films onto polystyrene (PS) colloids. After removing the PS colloids, the stabilities of the formed BCM hollow capsules were found to be strongly dependent on the charge density of the hydrophilic corona segments (i.e., P4VP and PAA block segments) as well as the relative molecular weight ratio of hydrophobic core (i.e., PS segments) blocks and hydrophilic corona shells. Furthermore, in the case of incorporating hydrophobic fluorescent dyes into the PS core blocks of micelles, the hairy/hairy BCM multilayers showed well-defined fluorescent images after colloidal template removal process. These phenomena are mainly caused by the relatively high degree of electrostatic interdigitation between the protonated and anionic corona block shells.     

The Core-Shell Approach to Formation of Ordered Nanoporous Silicas by MPEG-b-PLA Block Copolymers

Selected MPEG-b-PLA block copolymer templates have been synthesized by ring-opening polymerization, with systematic variation of the chain lengths of the hydrophilic and hydrophobic blocks. The size and shape of the micelles that spontaneously form in solution are controlled by the characteristics of the block copolymer template. Tunable pore sizes ranging from 2 to 8 nm were achieved in the templated synthesis of ordered nanoporous silica by increasing the hydrophobic chain lengths. The highest surface area observed by BET analysis was 660 m²/g. The formation mechanism of these nanoporous structures, obtained by controlling the micelle size, has been confirmed using both liquid and solid state ¹³C and ²⁹Si NMR techniques. This work verifies the formation mechanism of nanoporous structures in which the pore size and wall thickness are closely dependent on the size of the hydrophobic cores and hydrophilic shells of the block copolymer templates.     

Thermoresponsive micelles from well‐defined block copolymers synthesized via reversible addition–fragmentation chain transfer polymerization

Poly(N‐isopropylacrylamide) (PNIPAAm) homopolymers synthesized by reversible addition–fragmentation chain transfer polymerization were used as macro‐chain‐transfer agents to synthesize smart amphiphilic block copolymers with a switchable hydrophilic–hydrophobic block of PNIPAAm and a hydrophilic block of poly(N‐dimethylacrylamide). All polymers were characterized by gel permeation chromatography, ¹H NMR, and differential scanning calorimetry. The reversible micelles formed by the block copolymers of various compositions in aqueous solutions were characterized by ¹H NMR, dynamic light scattering, and tensiometry. Micelles were observed in the aqueous solutions when the temperature was increased to 40 °C because of the collapse of the PNIPAAm structure, which led to a PNIPAAm hydrophobic block. The drug loading capacity was illustrated with the use of the solvatochromic Reichardt's dye and measured by ultraviolet–visible. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3643–3654, 2005     

Synthesis and physical behavior of amphiphilic dendrimers with layered organization of hydrophilic and hydrophobic blocks

Amphiphilic carbosilane dendrimers with novel architectural layout have been synthesized. These dendrimers contain peripheral groups consisting of covalently bound promesogenic fragments and hydrophilic (oligoethyleneglycolic) linkages which are connected to a carbosilane core in two distinct ways: as spacer or as tail arrangement. Such molecules have a block structure where the hydrophilic and hydrophobic blocks are distributed within the dendrimer forming layers of different polarity. The hydrophilic layer is either enclosed between two hydrophobic parts of the molecule or is situated on the periphery. The synthetic strategy for achieving these structures is described. The interfacial properties of the dendrimers were studied and the influence of the dendritic structure’s organization on the Langmuir film formation process is assessed.