聚苯丙氨酸修饰低分子量聚乙烯亚胺制备高效基因载体

分别制备了以支化小分子量聚乙烯亚胺(PEI-1.8k)为引发剂,引发苯丙氨酸-NCA开环聚合得到聚乙烯亚胺-聚苯丙氨酸(PEI1.8k-g-PPhe)以及聚乙烯亚胺接枝苯丙氨酸单体(PEI1.8k-g-Phe)的系列基因载体材料.利用核磁、粒度、zeta电位仪、荧光光度计、流式细胞仪以及激光共聚焦显微镜对PEI1.8k-g-PPhe,PEI1.8k-g-Phe以及PEI1.8k-g-PPhe/DNA和PEI1.8k-g-Phe/DNA复合物颗粒进行了系统的表征.研究结果表明,最佳转染条件下,PEI1.8k-g-PPhe10/DNA复合物颗粒的粒径约为150 nm,表面电位约为16 m V.在人源宫颈癌(He La)和人源乳腺癌(MCF-7)2种细胞系中均具有较高的基因转染效率,且最佳转染效率可达到PEI-25k的12倍.MTT细胞毒性实验分别比较了PEI1.8k-g-PPhe和PEI1.8k-g-Phe对He La细胞毒性的大小.从实验结果可见,苯丙氨酸引入的方式及数量决定着其细胞毒性的大小.PEI1.8k-g-PPhe和PEI1.8k-g-Phe都具有较低的细胞毒性(材料在较高浓度1 mg/m L时的细胞存活率大于70%).内吞实验结果表明,PEI1.8k-g-PPhe由于接入了具有规则聚合链的聚苯丙氨酸,而易于被He La细胞内吞.PEI1.8k-g-PPhe10/DNA复合物颗粒相比于PEI-25k/DNA,PEI-1.8k/DNA和PEI1.8k-g-PPhe/DNA具有更高的细胞内吞效率.     

PEI基因载体靶向遮蔽体系的制备和表征

将RGD短肽接枝到聚谷氨酸(PGA)上,制备了一种靶向性的基因载体遮蔽材料PGA-RGD.通过凝胶电泳实验及体外转染实验证明得出RGD的引入增加了载体材料与细胞表面受体的特异性作用,在载体表面正电荷得到遮蔽的同时,转染效率还得到了一定程度的增加.同时,对转染了48h的三元复合物进行MTT细胞毒性测试表明,PGA遮蔽的基因载体体系(PGA/PEI/DNA)和PGA-RGD遮蔽的基因载体体系(PGA-RGD/PEI/DNA)的细胞毒性均低于PEI/DNA复合物体系.本文开发的基因载体改性方法不仅可以对复合物颗粒表面的正电荷进行遮蔽,从而降低复合物体系对非目标组织的非特性异作用;同时引入的RGD靶向短肽还可以提高载体的靶向性,这一改性策略对推动阳离子聚合物基因载体在体内的应用具有重要意义.     

阳离子基因载体的pH敏感遮蔽体系的制备及表征

合成了一种pH敏感的遮蔽体系-谷氨酸苄酯/谷氨酸共聚物(PBLG-co-PGA), 用于对DNA/阳离子基因载体复合物颗粒表面正电荷的遮蔽, 以提高其在体内的稳定性. 研究表明, PBLG-co-PGA (PGA(x), x为PGA占共聚物中摩尔百分数)具有pH敏感性. 并以pH敏感点接近生理pH值的PGA(60)为遮蔽体系进行研究. PGA(60)能够对DNA/PEI(1:1)复合物颗粒表面正电荷进行有效遮蔽. 凝胶阻滞电泳显示, 用PGA(60)对DNA/PEI复合物进行不同比例遮蔽, 没有发生与DNA的链交换作用. MTT细胞毒性测试表明, PGA(60)和三元复合物DNA/PEI/PGA(60) 在测试范围内几乎没有细胞毒性. 荧光素酶转染实验表明, 部分遮蔽后转染效率有所提高; 用PGA(60)对DNA/PEI复合物完全遮蔽为负电后, 由于同细胞表面的电荷排斥作用, 三元复合物不易被细胞内吞, 导致不发生细胞转染. 因其合适的pH响应性, PGA(60)将可能成为一种能随pH值的变化, 实现对聚阳离子基因载体进行电荷遮蔽/智能释放的遮蔽材料.     

胆固醇修饰的低分子量聚乙烯亚胺接枝化聚[L-天冬酰胺-co-L-赖氨酸]作为基因载体的性能研究

通过将低分子量的聚乙烯亚胺(PEI600)及其胆固醇衍生物与聚(L-天冬酰胺-co-L-赖氨酸)(PSL)进行开环反应, 合成了一类新型的肿瘤靶向基因载体, 研究了这类载体与DNA形成复合物的性质以及介导绿色荧光蛋白质粒pEGFP-C1转染不同细胞的性能. 结果表明, 在复合质量比大于5∶1时, 各载体均能与DNA形成结构稳定的复合物. 同时转染实验结果证明, 通过在侧链引入一定数目的胆固醇, 可以明显提高载体对于癌细胞HepG2和Hela的转染效率. 这类新型的载体具有良好的细胞相容性、较高的转染效率以及易于进行靶向修饰等特点, 在基因治疗研究领域中将具有较好的潜在应用价值.     

交联型聚乙烯亚胺智能基因载体的制备及PEG化影响

使用胱胺双丙烯酰胺(CBA)对低分子量聚乙烯亚胺(PEI)进行交联反应制备智能降解型聚阳离子基因载体.通过与聚乙二醇(PEG)反应得到不同程度PEG化的聚阳离子载体.利用核磁、黏度测试、粒度仪、zeta电位仪和凝胶电泳对聚阳离子载体及其与DNA的复合物进行了表征.研究表明随着PEG含量的增加,聚阳离子载体/DNA复合物颗粒粒径变小、表面正电荷降低,PEG具有明显的屏蔽作用,但过多的PEG也使载体与DNA复合能力下降.通过MTT细胞毒性测试和荧光素酶质粒转染实验得出,含二硫键的交联型阳离子聚合物在测试范围内显示了非常低的细胞毒性,最佳转染效率是PEI25k的4倍,PEG化后其细胞毒性得到进一步改善,转染效率却明显降低.     

多聚赖氨酸淀粉纳米颗粒基因载体的研制及应用

以可溶性淀粉为原料, 利用反向微乳液法, 加入交联剂三氯氧磷, 制备了直径为50 nm左右带负电荷的交联淀粉纳米颗粒. 以该纳米颗粒为内核, 经多聚赖氨酸修饰, 得到了多聚赖氨酸淀粉纳米颗粒(PLL-StNP). 对PLL-StNP进行了颗粒粒度、稳定性和电性的表征, 并通过颗粒的体外细胞毒性检测、颗粒与DNA结合能力及细胞转染等方面的分析, 发现多聚赖氨酸淀粉纳米颗粒(PLL-StNP)有可能作为基因载体, 在此基础上发展了多聚赖氨酸淀粉纳米颗粒基因载体的构建与基因转染技术. 作为非病毒基因载体, 赖氨酸淀粉纳米颗粒具有基因装载量大、转染率高、细胞毒性低以及可生物降解等优点.     

响应性阳离子聚合物及聚合物纳米胶束基因载体

人类多种疾病都与基因的结构或功能改变密切相关,基因治疗已经成为改善人类健康的新兴医学治疗手段,基因治疗的关键在于构筑高效的基因载体.发展生物可降解、具有高转染效率和低毒性的阳离子聚合物基因载体已经成为当今该领域的主要任务.本文主要介绍了对细胞内外的环境差异和外界刺激具有响应性的阳离子聚合物基因载体的合成方法,实现DNA在细胞内的有效释放;构筑不同拓扑结构的聚合物,运用聚合物的拓扑结构来调节DNA与聚合物组装复合体形貌,实现DNA的可控压缩和提高载体的转染效率;通过两亲性阳离子聚合物的自组装形成稳定的阳离子纳米胶束,增加聚合物表面电荷密度,从而有效增强聚合物和DNA结合能力,实现低正负电荷比条件下的DNA压缩和基因的高效表达.     

基于二氧化硅微颗粒促细胞增殖效应的基因转染新方法

报道了二氧化硅微颗粒(SiMPs)的促细胞增殖效应, 并基于该效应发展了一种以二氧化硅微颗粒为转染伴侣的基因转染新方法, 采用MTT实验证明了二氧化硅微颗粒具有促细胞增殖效应, 并以绿色荧光蛋白表达载体质粒pEGFP为报告基因, COS-7细胞为靶细胞, 在多聚-L-赖氨酸介导的基因转染中, 利用二氧化硅微颗粒的促细胞增殖效应, 加入二氧化硅微颗粒作为转染伴侣开展基因转染实验, 获得了显著增强的基因转染效率, 相比于未加入二氧化硅微颗粒为转染伴侣的基因转染方法, 该方法的转染效率提高到5倍多. 利用二氧化硅微颗粒的促细胞增殖效应, 以其作为转染伴侣的基因转染新方法不仅为相关研究提供了一种高效简便的基因转染新方法, 而且也为基因转染效率的提高提供了新的思路.     

ATRP法制备聚(甲基丙烯酸氨乙酯-co-甲基丙烯酸N,N-二乙基氨乙基酯)基因载体

为得到低毒、高效的聚阳离子基因载体,以甲基丙烯酸氨乙酯(AMA)和甲基丙烯酸N,N-二乙基氨乙基酯(DEAEMA)为单体,以2-溴代异丁酸乙酯(EBIB)为引发剂,通过原子转移自由基聚合(ATRP)制备了两种聚(甲基丙烯酸氨乙酯-co-甲基丙烯酸N,N-二乙基氨乙基酯)阳离子无规共聚物(P(AMA-co-DEAEMA),简称P).琼脂糖凝胶电泳实验结果表明聚合物P作为阳离子载体可以有效地络合DNA,通过粒径仪测定的复合物粒子的尺寸在400 ～ 600 nm之间.扫描电镜观察的P/DNA复合物形貌是分散均匀的球形颗粒.以25kDa PEI为阳性参照,利用MTT比色法考察了聚合物P对HEK293T细胞的毒性.结果表明,聚合物P的细胞毒性低于25 kDa PEI的细胞毒性.以25 kDa PEI和裸质粒DNA作为参照,我们进一步考察了聚合物P与DNA形成的复合物在HEK293T细胞中的转染效率.结果表明P/DNA复合物在HEK293T细胞中的转染效率远远高于裸质粒DNA的转染效率,并且接近于25 kDa PEI/DNA复合物的转染效率.     

PEG化壳聚糖/DNA自组装复合物的制备、表征和体外Hela细胞转染研究

通过有机合成和高分子聚合等方法将亲水性的聚乙二醇接枝到壳聚糖的氨基侧链上，得到了改性的壳聚糖—聚乙二醇接枝共聚物，应用现代波谱等技术对中间产物和最终产物进行了表征，采用绿色荧光蛋白基因质粒pEGFP—N1为DNA模型，在溶液中通过自动(静电)吸附得到PEG化的壳聚糖／DNA自组装复合物，初步研究了该自组装复合物对Hela细胞的体外转染效率。结果表明，活化的聚乙二醇被成功地接枝到壳聚糖上，使不溶于水的壳聚糖改性为水溶性的PEG化的壳聚糖。PEG化壳聚糖／DNA自组装复合物在Hela细胞体外转染率达到81％。因此，PEG化的壳聚糖有可能成为基因转染的非病毒载体。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.