利用高阶分区并行算法实现直接数值模拟

在基于MPI环境的分布式内存机群上,结合高阶WENO-RF格式的特点,实现了5阶WENO-RF格式的分区并行计算方法,计算精度不受分区和节点数量影响。使用该分区并行算法以三维可压缩时间发展混合层为例进行了直接数值模拟,验证了并行算法的准确性,表明机群并行运算可以显著扩展微机的计算能力,并行效率高,减少了计算的墙上时间,适合在小型高速局域网内进行大规模数值模拟计算。     

高阶紧致格式求解二维粘性不可压缩复杂流场

提出了一种求解二维不可压缩复杂流场的高精度算法．控制方程为原始变量、压力Ｐｏｉｓｓｏｎ方程提法．在任意曲线坐标下，采用四阶紧致格式求解Ｎａｖｉｅｒ－Ｓｔｏｋｅｓ方程组，时间推进采用交替方向隐式（ＡＤＩ）格式，在非交错网格上用松弛法求解压力Ｐｏｉｓｓｏｎ方程．对于复杂的流场，采用了区域分解方法，并在每一时间步对各子域实施松弛迭代使之能精确地反映非定常流场．利用该算法计算了二维受驱空腔流动，弯管流动和垂直平板的突然起动问题．计算结果与实验结果和其他研究者的计算结果相比较吻合良好．对于平板起动流动，成功地模拟了流场中旋涡的生成以及Ｋａｒｍａｎ涡街的形成     

浅水方程组合型超紧致差分格式

提出一族组合型超紧致差分格式(CSCD),对CSCD的数值特性作了分析,并同其他中心型差分格式进行比较。从定性角度,得出同阶中心差分格式中,CSCD格式的截断误差系数最小的结论。从定量角度,利用Fou-rier分析方法分析了CSCD格式的分辨率,并同其他中心型差分格式比较,得出CSCD格式有较高的分辨率的结论。把10阶CSCD格式应用于KdV-Burgers方程和浅水方程的数值模拟,给出两个应用算例。数值实验表明CSCD格式不仅有理论上的高精度,而且有良好的稳定性和收敛性。     

加权型紧致格式与加权本质无波动格式的比较

线性紧致格式和加权本质无波动格式是两种典型的高阶精度数值格式,它们各有优缺点.线性紧致格式在具有高阶精度的同时,格式的分辨率也比较高,耗散低,是计算多尺度流场结构的较好格式,但是不能计算具有强激波的流场.加权本质无波动格式是一种高阶精度捕捉激波格式,鲁棒性好,但耗散比较高,分辨率也不理想.近年来,在莱勒的线性紧致格式基础上,采用加权本质无波动格式捕捉激波思想,发展了一系列加权型紧致格式.本文较全面地比较了加权型紧致格式和加权本质无波动格式,包括构造方法、鲁棒性、分辨率、耗散特性、收敛特性以及并行计算效率.结果表明,现有的加权型紧致格式基本保持了加权本质无波动格式的性质,对于气动力等宏观量的计算,比加权本质无波动格式没有明显的优势.      

高精度加权紧致非线性格式的研究进展

综述了高精度加权紧致非线性格式WCNS在理论分析以及复杂流动应用方面的研究进展. 首先回顾了国内外高精度格式研究的概况, 然后介绍了WCNS的研究与发展历程. 在对WCNS进行了Fourier分析和渐近稳定性分析后, 给出了WCNS求解多维复杂流动的算例.      

基于HWCNS格式的紧致插值方法研究

在保证良好间断捕捉能力的前提下,能够达到更高的分辨率,一直是有限差分方法努力的方向。基于HWCNS格式构造思想,发展了一种高精度非线性紧致插值方法,构造了紧致七阶HWCNS格式,分析了其频谱特性,利用多个典型算例对所构造的格式性能进行了考察。结果表明,在模拟包含间断和多尺度流动结构的长时间演化问题中,本文发展的方法在计算结果精度和综合计算效率方面优于显式五阶HWCNS和七阶WENO格式,与频谱分析结论一致。     

污染扩散方程高精度紧致格式及其稳定性分析

针对污染扩散方程提出了时间任意阶精度的显式格式,并对该格式的稳定性和精度进行了分析,理论结果表明:一阶精度的计算格式是传统的显格式,其稳定条件为:s≤1/2(s=D.Δt/Δx2,D为扩散系数,Δt为时间步长,Δx为空间步长),随着保留精度阶数的增加,稳定性范围也会随之增大;当保留无穷阶精度时,格式是无条件稳定的。这也就从一个侧面揭示了稳定性与时间精度之间的关系,为高性能数值计算格式的构思提供了可以借鉴的原则。数值算例的结果表明,本文格式具有一定的实用性。     

数值求解Navier—Stokes方程的迎风紧致差分格式

从迎风紧致逼近^[1]出发,提出数值求解可压Navier-Stokes方程的一种高精度的数值方法。利用Steger-Warming的通量分裂技术^[2]将守恒型方程中的流通向量分裂成两部分,在此基础上据风向构造逼近于无粘项的三阶迎风紧致有限差分格式。对方程中的粘性部分采用通常的二阶差分逼近。所建立的差分格式被用来数值求解了三维粘性绕流问题。     

应用于计算气动声学的优化有限紧致格式

对于含间断的计算气动声学问题,数值计算的格式不仅要求低耗散低色散的设计,对短波具有较高的分辨率,还要求能捕捉激波.中心紧致格式具有高精度,具有无耗散和低色散特征,但不能捕捉间断和激波;WENO格式处理间断较为成功,而耗散和色散误差相对较大.有限紧致格式可以将紧致格式与WENO格式相结合构造成混合格式,利用光滑因子之间的关系对激波区域进行自动判断,将传统的全域求解的紧致格式划分为有限的局部紧致求解,间断点上的激波捕捉铜梁自动作为局部紧致求解的边界通量,在在光滑区域具有紧致格式的高精度低耗散性质,在激波附近不产生非物理振荡.本文利用有限紧致格式思想,构造了新的适合于气动声学问题的优化有限紧致格式,将其应用于计算气动声学一维标准测试问题,对相关格式的模拟性能进行了评估,显示该格式在宽频声波传播和含有间断的声波传播模拟方面具有优势.     

尺度无关高阶WCNS格式

高速流场的数值模拟中, 既要保证对小尺度结构的高保真分辨, 又要实现对激波稳定、无振荡地捕捉.当前工程中广泛应用的高精度数值格式虽然都能一定程度地满足上述两种要求, 但仍与理想目标存在较大差距.例如, 模拟雷诺应力模型等小尺度问题时, 高精度格式在间断解附近易产生数值振荡.基于高精度格式所存在的上述问题, 本文引入去尺度函数, 探索了一种更加简单稳定的非线性权重构造方法, 并将其应用于7阶精度加权紧致非线性格式WCNS, 提出了一种尺度无关的7阶WCNS格式.该格式的性能与灵敏度参数和尺度因子的选择无关, 并且在小尺度下仍可以有效捕捉流场激波.同时, 该格式在间断处具有基本无振荡性质, 且在任意尺度函数下保持尺度无关, 并且在极值点处也能保持最优精度.本文还推导了7阶D权函数的形式.最后, 在一维线性对流方程中验证了新格式在流场光滑区能够达到设计精度, 并通过一系列数值实验证明了尺度无关的7阶WCNS格式在激波捕捉能力上具有良好表现, 为WCNS格式改进和解决可压缩湍流等非线性问题提供了一种新途径.      

An improved parallel compact scheme for domain-decoupled simulation of turbulence

An improved domain-decoupled compact scheme for first and second spatial derivatives is proposed for domain-decomposition-based parallel computational fluid dynamics. The method improves the accuracy of previously developed decoupled schemes and preserves the accuracy and bandwidth properties of fully coupled compact schemes, even for a very large degree of parallelism, and enables the Navier-Stokes equations to be solved independently on each processor. The scheme is analysed using Fourier analysis and error analysis, and tested on one-dimensional wave-packet propagation, a two-dimensional vortex convection problem, and in the direct numerical simulation of the three-dimensional Taylor-Green vortex problem and turbulent channel flow. Our results demonstrate the scheme's effectiveness in performing direct numerical simulation of turbulence in terms of accuracy and scalability.     

Study of a staggered fourth‐order compact scheme for unsteady incompressible viscous flows

The objective of this paper is the development and assessment of a fourth‐order compact scheme for unsteady incompressible viscous flows. A brief review of the main developments of compact and high‐order schemes for incompressible flows is given. A numerical method is then presented for the simulation of unsteady incompressible flows based on fourth‐order compact discretization with physical boundary conditions implemented directly into the scheme. The equations are discretized on a staggered Cartesian non‐uniform grid and preserve a form of kinetic energy in the inviscid limit when a skew‐symmetric form of the convective terms is used. The accuracy and efficiency of the method are demonstrated in several inviscid and viscous flow problems. Results obtained with different combinations of second‐ and fourth‐order spatial discretizations and together with either the skew‐symmetric or divergence form of the convective term are compared. The performance of these schemes is further demonstrated by two challenging flow problems, linear instability in plane channel flow and a two‐dimensional dipole–wall interaction. Results show that the compact scheme is efficient and that the divergence and skew‐symmetric forms of the convective terms produce very similar results. In some but not all cases, a gain in accuracy and computational time is obtained with a high‐order discretization of only the convective and diffusive terms. Finally, the benefits of compact schemes with respect to second‐order schemes is discussed in the case of the fully developed turbulent channel flow. Copyright © 2008 John Wiley & Sons, Ltd.     

Finite‐difference 4th‐order compact scheme for the direct numerical simulation of instabilities of shear layers

An algorithm based on the 4th‐order finite‐difference compact scheme is developed and applied in the direct numerical simulations of instabilities of channel flow. The algorithm is illustrated in the context of stream function formulation that leads to field equation involving 4th‐order spatial derivatives. The finite‐difference discretization in the wall‐normal direction uses five arbitrarily spaced points. The discretization coefficients are determined numerically, providing a large degree of flexibility for grid selection. The Fourier expansions are used in the streamwise direction. A hybrid Runge–Kutta/Crank–Nicholson low‐storage scheme is applied for the time discretization. Accuracy tests demonstrate that the algorithm does deliver the 4th‐order accuracy. The algorithm has been used to simulate the natural instability processes in channel flow as well as processes occurring when the flow is spatially modulated using wall transpiration. Extensions to three‐dimensional situations are suggested. Copyright © 2005 John Wiley & Sons, Ltd.     

High‐order compact scheme for Boussinesq equations: implementation and numerical boundary condition issue

Application of the three‐point fourth‐order compact scheme to spatial differencing of the vorticity‐stream function‐density formulation of the two‐dimensional incompressible Boussinesq equations is presented. The details for the derivation of difference relations at boundaries to generate accurate and stable solutions are also given. To assess the numerical accuracy, two linear prototype test problems with known exact solution are used. The two‐dimensional planar and cylindrical lock‐exchange flow configurations are used to conduct the numerical experiments for the Boussinesq equations. Quantitative measures for the two linear prototype test problems and comparison of the results of this work with the published results for the planar lock‐exchange flow indicates the validity and accuracy of the three‐point fourth‐order compact scheme for numerical solution of two‐dimensional incompressible Boussinesq equations. In addition, the study of using different high‐order numerical boundary conditions for the implementation of the no‐penetration boundary condition for the density at no‐slip walls is considered. It is shown that the numerical solution is sensitive to the choice of difference relation for the density at boundaries and using an inappropriate difference relation leads to spurious numerical solution. Copyright © 2011 John Wiley & Sons, Ltd.     

Numerical schemes with high order of accuracy for the computation of shock waves

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｃｏｍｐｕｔａｔｉｏｎｏｆｆｌｏｗｆｉｅｌｄｗｉｔｈｓｈｏｃｋｗａｖｅｓｈａｓｂｅｅｎｔｈｅｓｕｂｊｅｃｔｏｆｒｅｓｅａｒｃｈｆｏｒｍａｎｙｙｅａｒｓ.Ｔｈｅｒｅａｒｅｂａｓｉｃａｌｌｙｔｗｏｃａｔｅｇｏｒｉｅｓｏｆｍｅｔｈｏｄｓ,ｎａｍｅｌｙ,ｓｈｏｃｋｆｉｔｔｉｎｇｍｅｔｈｏｄａｎｄｓｈｏｃｋｃａｐｔｕｒｉｎｇｍｅｔｈｏｄ.Ｔｈｅｆｏｒｍｅｒｄｉｖｉｄｅｓｔｈｅｃｏｍｐｕｔａｔｉｏｎａｌｄｏｍａｉｎｉｎｔｏｓｕｂ＿ｄｏｍａｉｎｓｂｙｔｈｅｓｈｏｃｋｗａｖｅｓ.Ｉｎｅ…     

A parallel implicit domain decomposition algorithm for the large eddy simulation of incompressible turbulent flows on 3D unstructured meshes

We present a parallel fully implicit algorithm for the large eddy simulation (LES) of incompressible turbulent flows on unstructured meshes in three dimensions. The LES governing equations are discretized by a stabilized Galerkin finite element method in space and an implicit second-order backward differentiation scheme in time. To efficiently solve the resulting large nonlinear systems, we present a highly parallel Newton-Krylov-Schwarz algorithm based on domain decomposition techniques. Analytic Jacobian is applied in order to obtain the best achievable performance. Two benchmark problems of lid-driven cavity and flow passing a square cylinder are employed to validate the proposed algorithm. We then apply the algorithm to the LES of turbulent flows passing a full-size high-speed train with realistic geometry and operating conditions. The numerical results show that the algorithm is both accurate and efficient and exhibits a good scalability and parallel efficiency with tens of millions of degrees of freedom on a computer with up to 4096 processors. To understand the numerical behavior of the proposed fully implicit scheme, we study several important issues, including the choices of linear solvers, the overlapping size of the subdomains, and, especially, the accuracy of the Jacobian matrix. The results show that an exact Jacobian is necessary for the efficiency and the robustness of the proposed LES solver.     

Implicit large eddy simulation of a supersonic flat-plate boundary layer flow by weighted compact nonlinear scheme

The performance of implicit large eddy simulation (ILES) of a supersonic flat-plate turbulent boundary layer flow by weighted compact nonlinear scheme (WCNS) has been investigated. In view of features of WCNS and ILES, it was expected that ILES by WCNS could be an efficient approach to perform LES of supersonic turbulent flows. The flowfield calculated by WCNS was of lower turbulent intensity compared with an explicit LES data obtained by a numerical scheme of the same order of accuracy on a computational grid of similar resolution. It was concluded that the numerical dissipation inherent in WCNS is so large that applying WCNS to ILES of this flowfield is inefficient compared with explicit LES.     

A time‐implicit high‐order compact differencing and filtering scheme for large‐eddy simulation

This work investigates a high‐order numerical method which is suitable for performing large‐eddy simulations, particularly those containing wall‐bounded regions which are considered on stretched curvilinear meshes. Spatial derivatives are represented by a sixth‐order compact approximation that is used in conjunction with a tenth‐order non‐dispersive filter. The scheme employs a time‐implicit approximately factored finite‐difference algorithm, and applies Newton‐like subiterations to achieve second‐order temporal and sixth‐order spatial accuracy. Both the Smagorinsky and dynamic subgrid‐scale stress models are incorporated in the computations, and are used for comparison along with simulations where no model is employed. Details of the method are summarized, and a series of classic validating computations are performed. These include the decay of compressible isotropic turbulence, turbulent channel flow, and the subsonic flow past a circular cylinder. For each of these cases, it was found that the method was robust and provided an accurate means of describing the flowfield, based upon comparisons with previous existing numerical results and experimental data. Published in 2003 by John Wiley & Sons, Ltd.