Kinetic study of crystallization of PHB in presence of hydroxy acids

Poly(3-hydroxybutyrate), PHB, has been structurally modified through reaction with hydroxy acids (HA) such as tartaric acid (TA) and malic acid (MA). The crystallization kinetic of the samples was evaluated by isoconversional method through nonlinear fitting to obtain the estimation for activation energy (E _a ) and pre-exponential (A) values. The thermal behavior of the crystallization temperature, 44.8 and 58.9 °C at 5 °C/min, and results obtained to the average activation energy, 73 ± 9 kJ mol⁻¹ and 63 ± 1 kJ mol⁻¹, to PHB/MA and PHB, respectively, are suggesting that malic acid may be deriving plasticizer units from its own PHB chain. PHB/TA show increase in the medium value of E _a, 119 ± 2 kJ mol⁻¹ and T _c = 48.2 °C (at 5 °C/min), indicating that tartaric acid is probably interacts in different way to the of PHB chain (E _a=73 ± 9 kJ mol⁻¹, T _c = 44.8 °C at 5 °C/min).     

Development of a liquid chromatography-mass spectrometry method for the determination of ursolic acid in rat plasma and tissue: application to the pharmacokinetic and tissue distribution study

A fast and sensitive liquid chromatography–mass spectrometry method was developed for the determination of ursolic acid (UA) in rat plasma and tissues. Glycyrrhetinic acid was used as the internal standard (IS). Chromatographic separation was performed on a 3.5 μm Zorbax SB-C18 column (30 mm × 2.1 mm) with a mobile phase consisting of methanol and aqueous 10 mM ammonium acetate using gradient elution. Quantification was performed by selected ion monitoring with (m/z)⁻ 455 for UA and (m/z)⁻ 469 for the IS. The method was validated in the concentration range of 2.5 − 1470 ng mL⁻¹ for plasma samples and 20 − 11760 ng g⁻¹ for tissue homogenates. The intra- and inter-day assay of precision in plasma and tissues ranged from 1.6% to 7.1% and 3.7% to 9.0%, respectively, and the intra- and inter-day assay accuracy was 84.2 − 106.9% and 82.1 − 108.1%, respectively. Recoveries in plasma and tissues ranged from 83.2% to 106.2%. The limits of detections were 0.5 ng mL⁻¹ or 4.0 ng g⁻¹. The recoveries for all samples were >90%, except for liver, which indicated that ursolic acid may metabolize in liver. The main pharmacokinetic parameters obtained were T _max = 0.42 ± 0.11 h, C _max = 1.10 ± 0.31 μg mL⁻¹, AUC = 1.45 ± 0.21 μg h mL⁻¹ and K _a = 5.64 ± 1.89 h⁻¹. The concentrations of UA in rat lung, spleen, liver, heart, and cerebellum were studied for the first time. This method is validated and could be applicable to the investigation of the pharmacokinetics and tissue distribution of UA in rats.     

Boronic acid-facilitated α-hydroxy-carboxylate anion transfer at liquid/liquid electrode systems: the EICrev mechanism

The transfer of the α-hydroxy-carboxylates of glycolic, lactic, mandelic and gluconic acid from the aqueous electrolyte phase into an organic 4-(3-phenylpropyl)-pyridine (PPP) phase is studied at a triple-phase boundary electrode system. The tetraphenylporphyrinato complex MnTPP dissolved in PPP is employed to drive the anion transfer reaction and naphthalene-2-boronic acid (NBA) is employed as a facilitator. In the absence of a facilitator, the ability of α-hydroxy-carboxylates to transfer into the organic phase improves, consistent with hydrophobicity considerations giving relative transfer potentials (for aqueous 0.1 M solution) of gluconate>glycolate>lactate>mandelate. In the presence of NBA, a shift of the reversible transfer potential to more negative values is indicating fast reversible binding (the mechanism for the electrode process is EIC_rev) and the binding constants are determined as K _glycolate = 2 M⁻¹, K _mandelate = 60 M⁻¹, K _lactate = 130 M⁻¹ and K _gluconate = 2,000 M⁻¹. The surprisingly strong interaction for gluconate is rationalised based on secondary interactions between the gluconate anion and NBA.     

Catalytic and Thermodynamic Characterization of Endoglucanase (CMCase) from <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> cmc-1

Monomeric extracellular endoglucanase (25 kDa) of transgenic koji (Aspergillus oryzae cmc-1) produced under submerged growth condition (7.5 U mg⁻¹ protein) was purified to homogeneity level by ammonium sulfate precipitation and various column chromatography on fast protein liquid chromatography system. Activation energy for carboxymethylcellulose (CMC) hydrolysis was 3.32 kJ mol⁻¹ at optimum temperature (55 °C), and its temperature quotient (Q ₁₀) was 1.0. The enzyme was stable over a pH range of 4.1–5.3 and gave maximum activity at pH 4.4. V _max for CMC hydrolysis was 854 U mg⁻¹ protein and K _m was 20 mg CMC ml⁻¹. The turnover (k _cat) was 356 s⁻¹. The pK _a1 and pK _a2 of ionisable groups of active site controlling V _max were 3.9 and 6.25, respectively. Thermodynamic parameters for CMC hydrolysis were as follows: ΔH* = 0.59 kJ mol⁻¹, ΔG* = 64.57 kJ mol⁻¹ and ΔS* = −195.05 J mol⁻¹ K⁻¹, respectively. Activation energy for irreversible inactivation ‘E _a(d)’ of the endoglucanase was 378 kJ mol⁻¹, whereas enthalpy (ΔH*), Gibbs free energy (ΔG*) and entropy (ΔS*) of activation at 44 °C were 375.36 kJ mol⁻¹, 111.36 kJ mol⁻¹ and 833.06 J mol⁻¹ K⁻¹, respectively.     

Improved properties of polymer electrolyte by ionic liquid PP1.3TFSI for secondary lithium ion battery

A new kind of polymer electrolyte is prepared from N-methyl-N-propylpiperidinium bis (trifluoromethanesulfonyl) imide (PP1.3TFSI), polyethylene oxide (PEO), and lithium bis (trifluoromethanesulfonyl) imide (LiTFSI). IR and X-ray diffraction results demonstrate that the addition of ionic liquid decreases the crystallization of PEO. Thermal and electrochemical properties have been tested for the solid polymer electrolytes, the addition of the room temperature molten salt PP1.3TFSI to the conventional P(EO)₂₀LiTFSI polymer electrolyte leads to the improvement of the thermal stability and the ionic conductivity (x = 1.27, 2.06 × 10⁻⁴ S cm⁻¹ at room temperature), and the reasonable lithium transference number is also obtained. The Li/LiFePO₄ cell using this polymer electrolyte shows promising reversible capacity, 120 mAh g⁻¹ at room temperature and 164 mAh g⁻¹ at 55 °C.     

Synthesis and electrochemical characterization of aPEO-based polymer electrolytes

In this paper, the preparation and purification of an amorphous polymer network, poly[oxymethylene-oligo(oxyethylene)], designated as aPEO, are described. The flexible CH₂CH₂O segments in this host polymer combine appropriate mechanical properties, over a critical temperature range from −20 to 60 °C, with labile salt-host interactions. The intensity of these interactions is sufficient to permit solubilisation of the guest salt in the host polymer while permitting adequate mobility of ionic guest species. We also report the preparation and characterisation of a novel polymer electrolyte based on this host polymer with lithium tetrafluoroborate, LiBF₄, as guest salt. Electrolyte samples are thermally stable up to approximately 250 °C and completely amorphous above room temperature. The electrolyte composition determines the glass transition temperature of electrolytes and was found to vary between −50.8 and −62.4 °C. The electrolyte composition that supports the maximum room temperature conductivity of this electrolyte system is n = 5 (2.10 × 10⁻⁵ S cm⁻¹ at 25 °C). The electrochemical stability domain of the sample with n = 5 spans about 5 V measured against a Li/Li⁺ reference. This new electrolyte system represents a promising alternative to LiCF₃SO₃ and LiClO₄-doped PEO analogues.     

FAD-modified SiO2/ZrO2/C ceramic electrode for electrocatalytic reduction of bromate and iodate

SiO₂/ZrO₂/C carbon ceramic material with composition (in wt%) SiO₂ = 50, ZrO₂ = 20, and C = 30 was prepared by the sol–gel-processing method. A high-resolution transmission electron microscopy image showed that ZrO₂ and the graphite particles are well dispersed inside the matrix. The electrical conductivity obtained for the pressed disks of the material was 18 S cm⁻¹, indicating that C particles are also well interconnected inside the solid. An electrode modified with flavin adenine dinucleotide (FAD) prepared by immersing the solid SiO₂/ZrO₂/C, molded as a pressed disk, inside a FAD solution (1.0 × 10⁻³ mol L⁻¹) was used to investigate the electrocatalytic reduction of bromate and iodate. The reduction of both ions occurred at a peak potential of −0.41 V vs. the saturated calomel reference electrode. The linear response range (lrr) and detection limit (dl) were: BrO₃ ⁻, lrr = 4.98 × 10⁻⁵–1.23 × 10⁻³ mol L⁻¹ and dl = 2.33 μmol L⁻¹; IO₃ ⁻, lrr = 4.98 × 10⁻⁵ up to 2.42 × 10⁻³ and dl = 1.46 μmol L⁻¹ for iodate.     

The Fed-Batch Production of a Thermophilic 2-Deoxyribose-5-Phosphate Aldolase (DERA) in <Emphasis Type="Italic">Escherichia coli</Emphasis> by Exponential Feeding Strategy Control

2-Deoxyribose-5-phosphate aldolase (DERA) catalyzes a sequential aldol reaction useful in synthetic chemistry. In this work, the effect of a feeding strategy on the production of a thermophilic DERA was investigated in fed-batch cultures of recombinant Escherichia coli BL21 (pET303-DERA008). The predetermined specific growth rate (μ _set) was evaluated at 0.20, 0.15, and 0.10 h⁻¹, respectively. The DERA concentration and volumetric productivity were associated with μ _set. The cells synthesized the enzyme most efficiently at μ _set = 0.15 h⁻¹. The maximum enzyme concentration (5.12 g/L) and total volumetric productivity (0.256 g L⁻¹ h⁻¹) obtained were over 10 and five times higher than that from traditional batch cultures. Furthermore, the acetate concentration remained at a relatively low level, less than 0.4 g/L, under this condition which would not inhibit cell growth and target protein expression. Thus, a specific growth rate control strategy has been successfully applied to induce fed-batch cultures for the maximal production of the thermophilic 2-deoxyribose-5-phosphate aldolase.     

Sequestering Ability of Dicarboxylic Ligands Towards Dioxouranium(VI) in NaCl and KNO<Subscript>3</Subscript> Aqueous Solutions at <Emphasis Type="Italic">T</Emphasis>=298.15 K

The formation constants of dioxouranium(VI)-2,2′-oxydiacetic acid (diglycolic acid, ODA) and 3,6,9-trioxaundecanedioic acid (diethylenetrioxydiacetic acid, TODA) complexes were determined in NaCl (0.1≤I≤1.0 mol⋅L⁻¹) and KNO₃ (I=0.1 mol⋅L⁻¹) aqueous solutions at T=298.15 K by ISE-[H⁺] glass electrode potentiometry and visible spectrophotometry. Quite different speciation models were obtained for the systems investigated, namely: ML⁰, MLOH⁻, ML₂²⁻, M₂L₂(OH)⁻, and M₂L₂(OH)₂²⁻, for the dioxouranium(VI)–ODA system, and ML⁰, MLH⁺, and MLOH⁻ for the dioxouranium(VI)–TODA system (M=UO₂²⁺ and L = ODA or TODA), respectively. The dependence on ionic strength of the protonation constants of ODA and TODA and of both metal-ligand complexes was investigated using the SIT (Specific Ion Interaction Theory) approach. Formation constants at infinite dilution are [for the generic equilibrium pUO₂²⁺+q(L²⁻)+rH⁺ ⇌(UO₂²⁺) _p (L) _q H _r ^(2p−2q+r);β _pqr ]: log ₁₀ β ₁₁₀=6.146, log ₁₀ β ₁₁₋₁=0.196, log ₁₀ β ₁₂₀=8.360, log ₁₀ β ₂₂₋₁=8.966, log ₁₀ β ₂₂₋₂=3.529, for the dioxouranium(VI)–ODA system and log β ₁₁₀=3.636, log ₁₀ β ₁₁₁=6.650, log ₁₀ β ₁₁₋₁=−1.242 for dioxouranium(VI)–TODA system. The influence of etheric oxygen(s) on the interaction towards the metal ion was discussed, and this effect was quantified by means of a sigmoid Boltzman type equation that allows definition of a quantitative parameter (pL ₅₀) that expresses the sequestering capacity of ODA and TODA towards UO₂²⁺; a comparison with other dicarboxylates was made. A visible absorption spectrum for each complex reaching a significant percentage of formation in solution (KNO₃ medium) has been calculated to better characterize the compounds found by pH-metric refinement.     

Determination of heat capacities of PbCrO4(s), Pb2CrO5(s), and Pb5CrO8(s)

Abstract  

Heat capacities of PbCrO₄(s), Pb₂CrO₅(s), and Pb₅CrO₈(s) were measured by differential scanning calorimetry. The measured heat capacities as a function of temperature are expressed as C _p <PbCrO₄> J K⁻¹ mol⁻¹ = 150.37 + 27.74 × 10⁻³ T − 2.80 × 10⁶ T ⁻² (T = 300–750 K), C _p <Pb₂CrO₅> J K⁻¹ mol⁻¹ = 194.55 + 76.09 × 10⁻³ T − 4.64 × 10⁶ T ⁻² (T = 300–700 K), and C _p  <Pb₅CrO₈> J K⁻¹ mol⁻¹ = 323.35 + 184.80 × 10⁻³ T − 5.48 × 10⁶ T ⁻² (T = 300–600 K). From the measured heat capacity data, thermodynamic functions such as enthalpy increments, entropies, and Gibbs energy functions were derived.     

Crystallization study of Sn additive Se–Te chalcogenide alloys

Calorimetric study of Se_85−x Te₁₅Sn _x (x = 0, 2, 4 and 6) glassy alloys have been performed using Differential Scanning Calorimetry (DSC) under non-isothermal conditions at four different heating rates (5, 10, 15 and 20 °C/min). The glass transition temperature and peak crystallization temperature are found to increase with increasing heating rate. It is remarkable to note that a second glass transition region is associated with second crystallization peak for Sn additive Se–Te investigated samples. Three approaches have been employed to study the glass transition region. The kinetic analysis for the first crystallization peak has been taken by three different methods. The glass transition activation energy, the activation energy of crystallization, and Avrami exponent (n) are found to be composition dependent. The crystallization ability is found to increase with increasing Sn content. From the experimental data, the temperature difference (T _p − T _g) is found to be maximum for Se₈₃Te₁₅Sn₂ alloy, which indicates that this alloy is thermally more stable in the composition range under investigation.     

Crystalline phase content and ionic conductivity correlation in LATP glass–ceramic

Li₂O–Al₂O₃–TiO₂–P₂O₅ (LATP) glass was fabricated by conventional melt quenching route. Glass transition temperature (T _g = 296 °C) and crystallization temperatures (T _C1,2) were obtained from thermal analysis. LATP glass was converted to glass–ceramic by heat treatment in the range 550–950 °C for 6 h. X-ray diffraction analysis revealed LiTi₂(PO₄)₃ as a major phase. Ionic conductivity increased monotonically with concentration, reaching a maximum of ~10⁻⁴ S/cm. AlPO₄ phase was detected in samples heat-treated above 850 °C. Its presence decreased the conductivity, suggesting LiTi₂(PO₄)₃ phase as main contributor to high ionic conductivity. NMR spectra confirmed the presence of mobile ⁷Li ions in the entire sample series and also gave some information on the structure and dynamics of conductivity.     

Electrochemical solid phase micro-extraction and determination of salicylic acid from blood samples by cyclic voltammetry and differential pulse voltammetry

The electrochemical solid phase micro-extraction of salicylic acid (SA) at graphite-epoxy-composed solid electrode surface was studied by cyclic voltammetry. SA was oxidized electrochemically in pH 12.0 aqueous solution at 0.70 V (vs. saturated calomel electrode) for 7 s. The oxidized product shows two surface-controlled reversible redox couples with two proton transferred in the pH range of 1.0∼6.0 and one proton transferred in the pH range of 10.0∼13.0 and is extracted on the electrode surface with a kinetic Boltzman function of i _p = 3.473–4.499/[1 + e^{(t − 7.332)/6.123}] (χ ² = 0.00285 μA). The anodic peak current of the extracted specie in differential pulse voltammograms is proportional to the concentration of SA with regression equation of i _p = −5.913 + 0.4843 c (R = 0.995, SD = 1.6 μA) in the range of 5.00∼200 μM. The detection limit is 5.00 μM with RSD of 1.59% at 60 μM. The method is sensitive and convenient and was applied to the detection of SA in mouse blood samples with satisfactory results.     

Segregation of human prostate tissues classified high-risk (UK) versus low-risk (India) for adenocarcinoma using Fourier-transform infrared or Raman microspectroscopy coupled with discriminant analysis

Vibrational spectroscopy techniques can be applied to identify a susceptibility-to-adenocarcinoma biochemical signature. A sevenfold difference in incidence of prostate adenocarcinoma (CaP) remains apparent amongst populations of low- (e.g. India) compared with high-risk (e.g. UK) regions, with migrant studies implicating environmental and/or lifestyle/dietary causative factors. This study set out to determine the biospectroscopy-derived spectral differences between risk-associated cohorts to CaP. Benign prostate tissues were obtained using transurethral resection from high-risk (n = 11, UK) and low-risk (n = 14, India) cohorts. Samples were analysed using attenuated total reflection Fourier-transform infrared (FTIR) spectroscopy, FTIR microspectroscopy and Raman microspectroscopy. Spectra were subsequently processed within the biochemical cell region (1,800⁻¹–500 cm^–1) employing principal component analysis (PCA) and linear discriminant analysis (LDA) to determine whether wavenumber–absorbance/intensity relationships might reveal biochemical differences associated with region-specific susceptibility to CaP. PCA-LDA scores and corresponding cluster vector plots identified pivotal segregating biomarkers as 1,582 cm⁻¹ (Amide I/II trough); 1,551 cm⁻¹ (Amide II); 1,667 cm⁻¹ (Amide I); 1,080 cm⁻¹ (DNA/RNA); 1,541 cm⁻¹ (Amide II); 1,468 cm⁻¹ (protein); 1,232 cm⁻¹ (DNA); 1,003 cm⁻¹ (phenylalanine); 1,632 cm⁻¹ [right-hand side (RHS) Amide I] for glandular epithelium (P < 0.0001) and 1,663 cm⁻¹ (Amide I); 1,624 cm⁻¹ (RHS Amide I); 1,126 cm⁻¹ (RNA); 1,761, 1,782, 1,497 cm⁻¹ (RHS Amide II); 1,003 cm⁻¹ (phenylalanine); and 1,624 cm⁻¹ (RHS Amide I) for adjacent stroma (P < 0.0001). Primarily protein secondary structure variations were biomolecular markers responsible for cohort segregation with DNA alterations exclusively located in the glandular epithelial layers. These biochemical differences may lend vital insights into the aetiology of CaP.     

Kinetics of crystallization of Zr52Cu18Ni14Al10Ti6 metallic glass

Metallic glasses have received considerable attention in comparison to normal metallic materials due to their superior physical and mechanical properties. These systems possess large under cooled region, ∆T (∆T = T _x − T _g where, T _x is crystallization temperature and T _g is glass transition temperature) and hence increased thermal stability against crystallization. Due to this, the study of their crystallization kinetics is important and interesting. It is interesting because of the fact that, crystallization becomes multi-step process due to several components present in these systems. In this paper, we report the experimental investigations of crystallization of Zr₅₂Cu₁₈Ni₁₄Al₁₀Ti₆ glassy alloy system, which is among the best non-beryllium containing glasses, using differential scanning calorimetry (DSC). The crystallization, as expected, consists of multiple steps. Interestingly, the peak heights of these steps vary with heating rate. At lower heating rates, first peak is most prominent and subsequently diminishes with increase in heating rate with last peak prominence visible at highest heating rate. Both, iso-kinetic and iso-conversional methods of analysis of kinetics of crystallization have been used to evaluate the activation energy and Avrami exponents and consistent results are obtained.     

A new amperometric H<Subscript>2</Subscript>O<Subscript>2</Subscript> biosensor based on nanocomposite films of chitosan–MWNTs,hemoglobin, and silver nanoparticles

A new H₂O₂ biosensor was fabricated on the basis of nanocomposite films of hemoglobin (Hb), silver nanoparticles (AgNPs), and multiwalled carbon nanotubes (MWNTs)–chitosan (Chit) dispersed solution immobilized on glassy carbon electrode (GCE). The immobilized Hb displayed a pair of well-defined and reversible redox peaks with a formal potential (E ^θ′) of −22.5 mV in 0.1 M pH 7.0 phosphate buffer solution. The apparent heterogeneous electron transfer rate constants (k _s) in the Chit–MWNTs film was evaluated as 2.58 s⁻¹ according to Laviron’s equation. The surface concentration (Γ*) of the electroactive Hb in the Chit–MWNTs film was estimated to be (2.48 ± 0.25) × 10⁻⁹ mol cm⁻². Meanwhile, the Chit–MWNTs/Hb/AgNPs/GCE demonstrated excellently electrocatalytical ability to H₂O₂. Its apparent Michaelis–Menten constant (K _M^app) for H₂O₂ was 0.0032 mM, showing a good affinity. Under optimal conditions, the biosensors could be used for the determination of H₂O₂ ranging from 6.25 × 10⁻⁶ to 9.30 × 10⁻⁵ mol L⁻¹ with a detection limit of 3.47 × 10⁻⁷ mol L⁻¹ (S/N = 3). Furthermore, the biosensor possessed rapid response to H₂O₂ and good stability, selectivity, and reproducibility.     

Absolute integrated intensities of vapor-phase hydrogen peroxide (H2O2) in the mid-infrared at atmospheric pressure

We report quantitative infrared spectra of vapor-phase hydrogen peroxide (H₂O₂) with all spectra pressure-broadened to atmospheric pressure. The data were generated by injecting a concentrated solution (83%) of H₂O₂ into a gently heated disseminator and diluting it with pure N₂ carrier gas. The water vapor lines were quantitatively subtracted from the resulting spectra to yield the spectrum of pure H₂O₂. The results for the ν₆ band strength (including hot bands) compare favorably with the results of Klee et al. (J Mol. Spectrosc. 195:154, 1999) as well as with the HITRAN values. The present results are 433 and 467 cm^-2 atm⁻¹ (±8 and ±3% as measured at 298 and 323 K, respectively, and reduced to 296 K) for the band strength, matching well the value reported by Klee et al. (S = 467 cm⁻² atm⁻¹ at 296 K) for the integrated band. The ν₁ + ν₅ near-infrared band between 6,900 and 7,200 cm⁻¹ has an integrated intensity S = 26.3 cm⁻² atm⁻¹, larger than previously reported values. Other infrared and near-infrared bands and their potential for atmospheric monitoring are discussed.     

Determination of butoxyacetic acid (biomarker of ethylene glycol monobutyl ether exposure) in human urine candidate reference material

Ethylene glycol monobutyl ether (EGBE), an industrial solvent, is absorbed by the body not only by inhalation but also by dermal absorption (liquid or vapour). EGBE is metabolized to butoxyacetic acid (BAA). Pooled freeze-dried urine candidate reference material (RM) was prepared from urine obtained from persons occupationally exposed to EGBE. This material has the advantage of containing butoxyacetic acid in both the free and conjugated (glutamine and glycine) forms, as found in native urine. In all GC method modifications used, acid hydrolysis was used to release BAA from its conjugated form. The amount of butoxyacetic acid in homogeneity and stability testing was measured by GC after derivatisation with N-tert-butyldimethylsilyl-N-methyltrifluoroacetamide. Detection was by MS in EI mode, in the authors’ laboratory. For interlaboratory comparison of the reference material GC methods with MS, FID, and ECD were used. Different extraction solvents (dichloromethane–isopropanol 2:1, ethyl acetate, or dichloromethane) and derivatisation reagents (trimethylsilyldiazomethane, N-tert-butyldimethylsilyl-N-methyltrifluoroacetamide) were used. Using ANOVA (at the statistical level α = 0.05) no changes were found in the concentration of butoxyacetic acid during fifteen month isochronous stability testing, or in homogeneity testing. The uncertainty contributions were u _h = 8.8 mg L⁻¹ and u _s = 6.5 mg L⁻¹. The concentration of butoxyacetic acid in freeze-dried urine RM was evaluated from the results of eight laboratory data sets within an interlaboratory comparison by use of the interactive statistical software IPECA. The contribution to total uncertainty derived from interlaboratory comparison was u _i = 12.7 mg L⁻¹. The reference value (c = 273 ± 33 mg L⁻¹) is an unweighted arithmetic average of accepted results. The value is traceable to the pure butoxyacetic acid (98% w/w; Acros Organic #257760010) used as calibrant. The uncertainty given is combined expanded uncertainty derived from the results from interlaboratory comparison, and from homogeneity and stability tests (k = 2). The reference material will be used to verify method performance in the biological monitoring of occupational exposure to EGBE.     

DODAB and DODAC bilayer-like aggregates in the micromolar surfactant concentration domain

In the millimolar concentration domain (typically 1 mM), dioctadecyldimethylammonium bromide and chloride (DODAX, X representing Br⁻ or Cl⁻ counterions) molecules assemble in water as large unilamellar vesicles. Differential-scanning calorimetry (DSC) is a suitable technique to obtain the melting temperature (T _m) characteristic of surfactant bilayers, while fluorescence spectroscopy detects formation of surfactant aggregates, like bilayers. These two techniques were combined to investigate the assembly of DODAX molecules at micromolar concentrations, from 10 to 100 μM. At 1 mM surfactant, T _m ≈ 45 °C and 49 °C, respectively, for DODAB and DODAC. DSC and fluorescence of Nile Red were used to show the formation of DODAX aggregates, at the surfactant concentration as low as 10 μM, whose T _m decreases monotonically with increasing DODAX concentration to attain the value for the ordinary vesicles. The data indicate that these aggregates are organized as bilayer-like structures.     

Synthesis and characterization of mesoporous Mn–Ni oxides for supercapacitors

Mesoporous Mn–Ni oxides with the chemical compositions of Mn_1-x Ni _x O _δ (x = 0, 0.2, and 0.4) were prepared by a solid-state reaction route, using manganese sulfate, nickel chloride, and potassium hydroxide as starting materials. The obtained Mn–Ni oxides, mainly consisting of the phases of α- and γ-MnO₂, presented irregular mesoporous agglomerates built from ultra-fine particles. Specific surface area of Mn_1–x Ni _x O _δ was 42.8, 59.6, and 84.5 m² g⁻¹ for x = 0, 0.2, and 0.4, respectively. Electrochemical properties were investigated by cyclic voltammetry and galvanostatic charge/discharge in 6 mol L⁻¹ KOH electrolyte. Specific capacitances of Mn_1-x Ni _x O _δ were 343, 528, and 411 F g⁻¹ at a scan rate of 2 mV s⁻¹ for x = 0, 0.2, and 0.4, respectively, and decreased to 157, 183, and 130 F g⁻¹ with increasing scan rate to 100 mV s⁻¹, respectively. After 500 cycles at a current density of 1.24 A g⁻¹, the symmetrical Mn_1–x Ni _x O _δ capacitors delivered specific capacitances of 160, 250, and 132 F g⁻¹ for x = 0, 0.2, and 0.4, respectively, retaining about 82%, 89%, and 75% of their respective initial capacitances. The Mn_0.8Ni_0.2O _δ material showed better supercapacitive performance, which was promising for supercapacitor applications.