Study of sorption processes of strontium on the synthetic hydroxyapatite

The sorption of strontium on synthetic hydroxyapatite was investigated using batch method and radiotracer technique. The hydroxyapatite samples were prepared by a wet precipitation process followed by calcination of calcium phosphate that precipitated from aqueous solution. Also, commercial hydroxyapatites were used. The sorption of strontium on hydroxyapatite depended on the method of preparation and it was pH independent ranging from 4 to 9 as a result of buffering properties of hydroxyapatite. The distribution coefficient K _d was significantly decreased with increasing concentration of Sr²⁺ and Ca²⁺ ions in solution with concentration above 1 × 10⁻³ mol dm⁻³. The percentage strontium sorption for commercial and by wet method prepared hydroxyapatite was in the range of 83–96%, while calcined hydroxyapatite was ranging from 10 to 30%. The experimental data for sorption of strontium have been interpreted in the term of Langmuir isotherm. The sorption of Sr²⁺ ions was performed by ion-exchange with Ca²⁺ cations on the crystal surface of hydroxyapatite. Although calcined hydroxyapatite is successfully used as biomaterial for hard tissues repair, it is not used for the treatment of liquid wastes.     

Modelling of the Sorption of Sr(II) on Hydrous Zirconium Oxide

The amphoteric acid-base behavior of hydrous zirconium oxide (HZO) was investigated by titrating HZO with 0.05M HNO₃ and NaOH at constant ionic strength. The sorption of strontium from 0.05M NaNO₃ solution was measured as a function of pH. Abrupt increase in sorption was observed at the equilibrium pH of 9. The experimental titration and strontium sorption data on HZO were evaluated using the constant capacitance model (CCM) and diffuse double layer model (DLM). Various model parameters of Surface Complexation Models (SCM) were estimated, numerically, by non-linear regression. Modeling the sorption and speciation of Sr²⁺ on HZO indicated that the hydrolysis of Sr²⁺ to lower charged SrOH⁺ is the pre-requisite for the abrupt sorption behavior at pH 9.     

Effect of fulvic acid and ionic strength on the sorption of radiostrontium on Chinese calcareous soil and its solid components

Summary The sorption and desorption of radionuclide ⁹⁰Sr²⁺were investigated on untreated calcareous soil and two treated soils to remove organic matter and calcium carbonate using batch technique. The experiments were carried out at ambient condition, pH 7.8±0.1 and in the presence of 0.001M NaCl. Effects of fulvic acid and ionic strength on the sorption of ⁹⁰Sr²⁺on calcareous soil were also studied. It was found that the sorption isotherms are linear in the strontium concentration range used herein, and the sorption of ⁹⁰Sr²⁺on the calcareous soil can be described as a reversible sorption process and the sorption mechanism is mainly ion-exchange. The sorption is dependent on ionic strength, and fulvic acid enhances the sorption of ⁹⁰Sr²⁺on calcareous soil. Organic matter present in the calcareous soil is a significant trap of ⁹⁰Sr²⁺and is responsible for the sorption.     

Zur Abtrennung des Spaltstrontiums aus Kernbrennstoffen an Ammoniummolybdatophosphat

The separation of fission strontium from solutions of prolonged cooled nuclear fuel has been performed using ammoniummolybdatophosphate (AMP) columns. The sorption mechanism of bivalent ions on AMP has been investigated by column and batch experiments. A pure ion exchange of Sr²⁺ for two H⁺ or NH ₄ ⁺ ions has been established. Conditions for the sorption and elution of fission strontium and other fission products on AMP columns are described.     

Isotherm of strontium and sodium cation exchange on iron-manganese nodules

The isotherm of ion exchange of Sr²⁺ and Na⁺ ions on iron-manganese nodules was obtained. It was suggested to describe the ion exchange by an equation analogous to the Langmuir isotherm equation. The limiting sorption and apparent ion exchange constant were calculated. The effective radius of sorbed strontium ions was determined.     

Sorption of strontium by Mexican erionite

The apparent diffusion coefficient of Sr²⁺ in natural Mexican erionite from Sonora at different pH and concentrations were determined. Neutron activation was applied to measure the sorption of strontium. The apparent diffusion coefficient values showed that the mobility of Sr²⁺ through the cavities of the erionite depended on the concentration of strontium and the pH of the solution. As a consequence the sorption of this ion by the erionite was affected by these parameters and the maximum sorption of Sr²⁺ was at pH higher than 3 and 0.0094 mol·l^–1 strontium nitrate solution.     

Adsorption of strontium ions from aqueous solution using hydrous,amorphous MnO2–ZrO2 composite: a new inorganic ion exchanger

Hydrous, amorphous MnO₂–ZrO₂ composite was prepared as a new inorganic composite material under various conditions for removal of Sr²⁺ ion from aqueous solutions. The physico-chemical characterization was carried out by Fourier transform infrared spectroscopy, X-ray powder diffraction, scanning electron microscopy and thermogravimetry. The maximum sorption capacity for synthesized composite was evaluated as 1.5 meq/g sorbent and batch experiments were carried out as a function of contact time, aqueous phase pH, temperature and initial metal ions concentration of adsorptive solution. The results indicated that under optimal conditions, Sr²⁺ ions could be efficiently removed using MnO₂–ZrO₂ composite from aqueous solutions when pH > 5. The equilibrium isotherms were determined and the sorption data were successfully modeled using Langmuir model. Kinetics of the process was studied by considering a pseudo second-order model. This model predicted chemisorption as the adsorption mechanism. The results of thermodynamic investigation reveal that the adsorption process of the studied ion is entropy driven.     

Sorption and diffusion of 90Sr2+in compacted bentonite investigated by a capillary method

Summary The effects of bentonite density and fulvic acid on the sorption and diffusion of ⁹⁰Sr²⁺in compacted bentonite were investigated by using a capillary method. The experiments were carried out at pH 7.0±0.1 in the presence of 0.01M NaClO₄. The results suggest that the sorption and diffusion of ⁹⁰Sr²⁺in compacted bentonite decreases with increasing the density of compacted bentonite. The presence of FA enhances the sorption of Sr²⁺, but reduces the diffusion of Sr²⁺in compacted bentonite. The porosity of the compacted bentonite plays an important role in the sorption and diffusion behavior of ⁹⁰Sr²⁺. Using the calculated effective diffusion coefficients the long-term relative concentration distribution of strontium was evaluated in compacted bentonite.     

Factors affecting the sorption behavior of Cs<Superscript>+</Superscript> and Sr<Superscript>2+</Superscript> using biosorbent material

In this study, saw dust has been used as precursor for production of low cost activated carbon using potassium hydroxide (KOH) and steam activation technique. The activated carbon was used to remove Cs⁺ and Sr²⁺ ions from aqueous solutions by batch operation, and the extent of adsorption was investigated as a function of solution pH, temperature, shaking time, and initial concentration. The influence of interfering ions was also investigated. The removal of metal ions was pH dependent and the adsorption capacity reaches its maximum 43% and 61.5% at pH 5.0 and 6.0 for Cs⁺ and Sr²⁺ ions, respectively. Thermodynamic studies showed different behaviours where an endothermic, non-spontaneous process was shown for Cs⁺ while an exothermic, spontaneous process was obtained for Sr²⁺. The kinetic data of both ions was described well by pseudo-second order rate equation. The two equilibrium models (Langmuir and Freundlich) have been also applied. Desorption studies indicated that HCl was the most effective desorbing eluent. The investigated adsorbent showed good results towards cesium and strontium removal from aqueous media that could be a promising method due to its low-cost and good efficiency.     

Adsorption kinetic, isotherm and thermodynamic studies of Sr2+ onto hexagonal tungsten oxide

Hexagonal tungsten oxide (hex-WO₃) with exchangeable sodium and ammonium cations located in hexagonal channel was synthesized by a facile hydrothermal treatment of sodium tungstate dihydrate in concentrated HCl solution in the presence of ammonium sulfate. An attempt was made to assess the potential of hex-WO₃ for the adsorption of Sr²⁺ ions from acidic radioactive waste solutions. Adsorption of Sr²⁺ reached equilibrium very quickly in 2 h in acidic aqueous solution. Maximum removal of Sr²⁺ ions occurred at pH 4. Equilibrium studies showed that the extent of Sr²⁺ ions uptake by hex-WO₃ was better described by the Freundlich isotherm in comparison with the Langmuir model. The thermodynamic parameters showed that the adsorption of Sr²⁺ ions onto hex-WO₃ was spontaneous and exothermic under the studied conditions.     

Adsorption behaviors of strontium using macroporous silica based hexagonal tungsten oxide

A novel macroporous silica-based hexagonal tungsten oxide (h-WO₃/SiO₂) with exchangeable sodium cations located in hexagonal tunnel structure was synthesized by a facile hydrothermal treatment of sodium tungstate dihydrate with 1 mol/L HCl solution. Utilization of the h-WO₃/SiO₂ adsorbent to remove aqueous strontium was investigated under the condition of various pH values, contact time, the initial concentration of metal ions, salt ion concentration, and coexisting ions. According to the experimental data, Sr²⁺ adsorption equilibrium was achieved within 15 min in acidic solution, and the maximum removal capacity of Sr²⁺ occurred at pH 4. The kinetic adsorption of Sr²⁺ on h-WO₃/SiO₂ was controlled by pseudo second-order model, and the saturated adsorption of Sr²⁺ on h-WO₃/SiO₂ was better described by Langmuir and Redlich-Peterson isotherm models compared with the Freundlich isotherm model. The distribution coefficient of Sr²⁺ was more than 2000 cm³/g in the presence of Ca²⁺, Mg²⁺, La³⁺, and Eu³⁺, indicating that the h-WO₃/SiO₂ showed excellent selectivity towards Sr²⁺ in pH 4.     

Effect of fulvic acid on the sorption and desorption of 90Sr2+ on red earth

Summary Sorption and desorption of radiostrontium on the red earth and its solid components in the presence and absence of fulvic acid were investigated by a batch technique under ambient conditions at pH 5.3±0.1 and T = 25±2 °C. The organic matter in the red earth is a significant trap of ⁹⁰Sr²⁺ and the presence of fulvic acid enhances the sorption of ⁹⁰Sr²⁺ on the red earth at pH 5.3. It was found that all the sorption and desorption isotherms are linear and the sorption of ⁹⁰Sr²⁺ on the red earth can be described by a reversible sorption process and the sorption mechanism is mainly ion-exchange. The effect of ionic strength on ⁹⁰Sr²⁺ sorption was also investigated.     

Radiochemical studies of the sorption behavior of strontium and barium

The sorption behavior of strontium and barium on kaolinite, bentonite and chlorite-illite mixed clay was studied by radioanalytical techniques using the batch method.⁹⁰Sr (29.1 y) and¹³³Ba (10.5 y) were used as radiotracers. Characterization of the solid matrices was done by FTIR and XRD spectrometries and specific surface area measurements. Synthetic groundwater was used as the aqueous phase. The variation of the distribution ratioR _d, as a function of metal ion loading was examined. The sorption isotherms were fitted to various isotherm models. The sorption energies were calculated to be in the range of 8–10 kJ/mol suggesting an ion exchange type of sorption mechanism. In detailed experiments, chlorite-illite mixed clay was first presaturated with K⁺, Sr²⁺, Ca²⁺ and Al³⁺ ions, respectively, prior to sorption studies with Ba²⁺ ions. The results of Ca²⁺ pretreated chlorite-illite were very similar to those of natural chlorite-illite, suggesting that the Ba²⁺ ion exchanges primarily with the Ca²⁺ ion on the clay minerals.     

Sorption of strontium on Slovak bentonites

Sorption of Sr on five Slovak bentonites of deposits has been studied with the use of batch technique. In the experiments there have been used natural, chemically modified and irradiated samples, in three different kinds of grain size. The pH influence on sorption of strontium on bentonites, pH change after sorption and influence of competitive ions have been studied. Distribution ratios have been determined for bentonite–strontium solution system as a function of contact time, pH and sorbate concentration. The data have been interpreted in term of Langmuir isotherm. The uptake of Sr has been rapid and the sorption of strontium has increased by increasing pH. The percentage sorption has decreased with increasing metal concentrations. The pH value after sorption for the natrificated forms of bentonite starts already in the alkaline area and moves to the higher values. For the natural bentonites the values occur in the neutral or in the acidic area. Sorption of Sr has been suppressed by presence of competitive cations as follows: Ba²⁺ > Ca²⁺ > Mg²⁺ > NH₄ ⁺ > K⁺ > Na⁺. By sorption on natrificated samples colloidal particles and pH value increase have been formed. The bentonite exposure as a result of interaction of γ-rays has led to expansion of the specific surface, increasing of the sorption capacity and to the change in the solubility of the clay materials.     

Removal of copper (Cu2+) from water by sulfonated cellulose

Water insoluble sulfonated cellulose was prepared and applied for Cu²⁺ removal from water. The effects of sorbent dose, initial solution pH, temperature and initial Cu²⁺ concentration on the removal performance of sulfonated cellulose were investigated. Isothermal data were modeled with the Langmuir and Freundlich isotherm models. The Cu²⁺ sorption onto sulfonated cellulose followed the Langmuir isotherm model with the maximum sorption capacity of 8.2?mg-Cu²⁺/g. Removal of Cu²⁺ showed rapid initial kinetics; in 3?min removal of Cu²⁺ reached equilibrium status. Thermodynamic study revealed an exothermic sorption process. In addition, sulfonated cellulose is a kind of green and renewable sorbent because it can be easily regenerated by 0.1?M HCl.     

Sorption of nickel on chitosan

The sorption of nickel on chitosan was studied using batch method. As a tracer was used radioisotope ⁶³Ni. The effect of pH and contact time to reach sorption equilibrium was investigated. During the sorption of Ni²⁺ ions occur mostly to ion-exchange reactions on the surface of sorbent. The time to reach the sorption equilibrium of nickel on chitosan was 14 h. The percentage of sorption after 14 h achieved the value of 84 %. On the sorption of nickel used solutions with initial pH in the range from 3.9 to 8.1. In the monitored range of pH after 24 h of contact was the sorption of nickel on chitosan >97 %. The sorption of nickel was reduced by increasing concentrations of Ni²⁺ ions in the solution. The experimental data for sorption of nickel have been interpreted in the term of Langmuir isotherm and the value of maximum sorption capacity of nickel on chitosan was 2.71 × 10^?3 mol g^?1.     

Affinity and removal of radionuclides mixture from low-level liquid waste by synthetic ferrierites

The affinity and removal efficiency of ¹³⁷Cs⁺, ¹³³Ba²⁺, ⁸⁵Sr²⁺ and ²⁴¹Am³⁺ mixture from aqueous solutions using two synthetic ferrierites HSZ 700KOA and 700KOD commercially used as a catalyst in oil industry were investigated. The uptake of metal ions as a function of different parameters has been studied using batch equilibrium technique. Kinetic curves showed that the equilibrium was mostly reached within 45 min for Cs⁺ and Ba²⁺ and revealed to be longer for Sr²⁺ and Am³⁺. Using Freundlich and Langmuir adsorption isotherms, the results showed that the affinity and adsorption capacity of 700KOA and 700KOD follow the order: Cs⁺ > Ba²⁺ > Sr²⁺ > Am³⁺ with higher values for first material. Both adsorbents exhibited significant high capacity for Cs⁺ relative to other cations giving q _max 1.97 and 1.78 mmol g⁻¹ for 700KOA and 700KOD, respectively. All metals uptake found to be concentration dependant and independent of the pH over 2 to 10 range except Am³⁺; this reveals that the adsorption mechanism is controlled mainly by pure ion exchange reaction for Cs⁺, Ba²⁺, Sr²⁺ and by surface complexation mechanism for Am³⁺. These simple nontoxic materials are recommended to be used for radioactive waste treatment especially fission product ¹³⁷Cs and activation product ¹³³Ba.     

Distribution of strontium in milk component

The distribution of strontium between the milk components, i.e., serum, casein micelles, whey and hydroxyapatite was determined. The sorption on hydroxyapatite was investigated using batch method and radiotracer technique. The aqueous phase comprised of either milk or whey. The sorption of strontium on hydroxyapatite depended on the method of its preparation and on the composition of the aqueous phase. The sorption of strontium was increased with an increase of pH. The presence of citrate species resulted in decrease of the sorption of strontium on hydroxyapatite. The sorption of ⁸⁵Sr on hydroxyapatite decreased with the increasing concentration of Ca²⁺ ions. Addition of Ca²⁺ ions to milk resulted in milk pH decrease. The decrease in pH value after calcium addition to milk is related to exchanges between added calcium and micellar H⁺. The average value of strontium sorption on casein micelles in milk with presence of hydroxyapatite was (47.3 ± 5.6) %. The average value of sorption of ⁸⁵Sr on casein micelles in milk without the addition of hydroxyapatite was (68.9 ± 2.2) %.     

Efficient Removal of Cobalt(II) and Strontium(II) Metals from Water using Ethylene Diamine Tetra‐acetic Acid Functionalized Graphene Oxide

Graphene oxide (GO) with high specific surface area was prepared and functionalized with ethylene diamine tetra‐acetic acid (EDTA). The as‐prepared GO and the functionalized one (GO‐EDTA) were characterized using high resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), and Raman spectroscopy. The as‐prepared and EDTA funcationalized GO were applied as adsorbent to remove strontium(II) and cobalt(II) from water. The results indicated that the prepared materials are efficient adsorbents for strontium(II) and cobalt(II) removal. The adsorption of Co^II and Sr^II under effects of contact time, temperature, and pH was investigated It is concluded that the maximum adsorption capacities of GO for Co^II and Sr^II were about 168 and 140 mg · g^–1, whereas of GO‐EDTA the values were about 197 and 158 mg · g^–1, respectively. It is indicated that pH 6 and temperature 40 °C are the best condition for Co^II and Sr^II removal from water. The application of Langmuir and Freundlich isotherms indicated that Langmuir isotherm is best fit for Co^II and Sr^II equilibrium adsorption. Adsorption kinetics were studied by applying pseudo first‐order, pseudo second‐order, and intraparticle diffusion models on the experimental data. The results proved that pseudo second‐order model is the best represented adsorption kinetics. Appling the intraparticle diffusion regressions on the experimental data indicated that intraparticle diffusion involved in adsorption process, which was not the only rate‐controlling step.