羟基喜树碱-类水滑石纳米杂化的共组装制备及表征

采用共组装法在水溶液中制备羟基喜树碱(HCPT)-层状双金属氢氧化物(LDH)纳米杂化物.先利用微通道反应器通过共沉淀法制备了Zn₂Al-NO₃ LDH纳米片,然后与羧酸盐型HCPT在水介质中共组装,制备了HCPT插层LDH的纳米杂化物.利用酸处理,可将层间HCPT由非生物活性的羧酸盐型转化为生物活性的内酯型,这对高生物活性HCPT-LDH纳米杂化物的绿色制备具有重要意义.共组装法制备HCPT-LDH纳米杂化物,耗时短、载药量高、分散性好,且利用原料配比可方便地调控载药量. HCPT分子在LDH层间以其长轴倾斜于层板呈双层排列.所制备的HCPT-LDH纳米杂化物具有良好的药物缓释性能,颗粒内部扩散是药物释放过程的控速步骤.药物释放过程可用准二级动力学模型描述.可以用于构筑LDH基药物输送-控释体系.     

氟尿苷-层状双金属氢氧化物纳米杂化物制备及表征

采用共沉淀法将抗癌药物氟尿苷插入Mg-Al层状双金属氢氧化物(LDHs)的层间,合成了氟尿苷-LDHs纳米杂化物。依据氟尿苷分子大小和杂化物通道高度推测,氟尿苷分子是以长轴垂直或略倾斜于LDHs层片在LDHs层间呈双层排列。分别在pH=4.8和7.2的介质中研究了药物释放动力学,表明符合准二级动力学方程;释放速率随载药量增大而降低;氟尿苷-LDHs纳米杂化物具有良好的缓释效果。     

10-羟基喜树碱-癸二酸-LDH杂化物的制备及性能

采用二次插层法成功制备了10-羟基喜树碱(HCPT)-癸二酸(SC)插层的层状双金属氢氧化物(LDH). 先采用共沉淀法制备SC柱撑LDH杂化物(SC-LDH), 再在乙醇介质中将HCPT插入LDH层间形成HCPT-SC-LDH纳米杂化物. 依据SC和HCPT的分子尺寸和纳米杂化物的通道高度, 推测SC分子在层间可能为双层排列, SC分子两端的羧基同时键合在同一个LDH层片表面上; HCPT分子插入(或溶入)SC分子碳氢链形成的疏水区中. 所制备的纳米杂化物既可稳定HCPT的内酯环, 又可明显提高HCPT的溶解度, 还具有明显的药物缓释效果, 其释放动力学过程符合准二级动力学方程.     

喜树碱/氧化石墨烯/类水滑石纳米杂化物的制备及表征

采用共组装法成功制备了电中性疏水抗癌药物喜树碱（CPT）/氧化石墨烯（GO）/Mg-Al类水滑石（HTlc）纳米杂化物. 先将CPT负载于荷负电的GO纳米片表面上制备成CPT/GO复合物,再与荷正电的HTlc纳米片（HNS）共组装,形成CPT/GO/HTlc纳米杂化物,其中GO纳米片和HNS相间叠加,CPT负载于层间. 采用X-射线衍射、透射电子显微镜、原子力显微镜、扫描电子显微镜-能量色谱仪、傅里叶变换红外光谱、紫外-可见分光光度计和热重/差示扫描量热分析等技术对纳米杂化物进行了表征. 37 ℃下分别在pH 7.4和4.0的磷酸缓冲液中,考察了CPT/GO/HTlc纳米杂化物的药物释放行为. 结果表明,CPT/GO/HTlc纳米杂化物的药物释放过程符合准二级动力学方程,且具pH响应性,在酸性（pH 4.0）介质中的释放速率和释放率明显高于中性（pH 7.4）介质. 共组装法是构筑药物/ GO/HTlc纳米杂化物的简便方法,该纳米杂化物在药物输送领域具有良好的应用前景.     

利用有机改性的类水滑石缓释阿维菌素

采用蒸发溶剂促进插层(evaporating solvent enhanced intercalation)的方法把农药阿维菌素(Avermectin, AVM)插层到十二烷基硫酸钠(SDS)改性的类水滑石(Hydrotalcite-like compound, HTlc)层间，合成了AVM-SDS-HTlc纳米杂化物。研究发现其能够很好的控制阿维菌素的释放，表明AVM-SDS-HTlc纳米杂化物是一种很有潜力的农药控释剂型。AVM-SDS-HTlc纳米杂化物的释放受pH、温度和电解质的影响，酸性介质、较高温度以及有电解质存在会提高其缓释速率。释放过程符合准一级释放动力学，释放的活化能为279 kJ/mol。     

剥离-共组装法制备葫芦素插层类水滑石纳米杂化物

采用剥离-共组装法制备了电中性疏水药物葫芦素(CA)插层类水滑石(HTlc)纳米杂化物. 先用胆酸钠(Ch)包覆修饰葫芦素, 再与剥离的HTlc薄片共组装, 形成CA-Ch-HTlc纳米杂化物. 采用小角X射线散射、 傅里叶变换红外吸收光谱、 透射和扫描电子显微镜、 Zeta电位和元素分析等技术对样品进行了表征. 所制备纳米杂化物的载药量达到7.06%, 表明该方法可以实现电中性疏水药物在HTlc上的有效负载. 依据胆酸离子和葫芦素尺寸及纳米杂化物通道高度推测, 胆酸离子在HTlc层间为双层排列, 其长轴几乎垂直于HTlc层板; 葫芦素分子插入(或“溶入”)胆酸离子双层中. CA-Ch-HTlc纳米杂化物具有良好的药物缓释效果, 其药物释放过程符合准二级动力学方程.     

大黄素/Mg-Al-LDHs纳米杂化物的制备及缓释性能研究

以Mg-Al型层状双金属氢氧化物(Mg-Al-LDHs)为载体,将大黄素分子通过二次组装法成功插入其层间,得到大黄素/Mg-Al-LDHs纳米杂化物。XRD结果显示,Mg-Al-LDHs粒子层间距由0.48 nm增大到3.35 nm。差热曲线(DTA曲线)分析结果表明,该纳米杂化物分子中大黄素的分解温度比纯大黄素的分解温度高50℃。分别在pH 4.8和pH 7.5的缓冲溶液中测定了大黄素/LDHs的缓释性能,结果表明大黄素/LDHs的药品释放速率明显低于二者的物理混合物,并探讨了释放机理。     

Fe3 O4@(TF-LDHs)纳米复合体的制备及药物缓释性能

采用共沉淀法, 以替加氟(Tegafur, TF)插层层状双金属氢氧化物(LDHs)纳米杂化物(TF-LDHs)包覆磁性基质Fe3O4, 得到了具有核/壳结构的纳米复合体[Fe3O4@(TF-LDHs)], 采用XRD, FTIR, TEM, VSM和元素分析等技术对样品的化学组成、 晶体结构\, 形貌及磁性等进行了表征, 探讨了药物分子在LDHs层间的存在状态, 考察了其药物释放行为. 结果表明, Fe3O4@(TF-LDHs)纳米复合体具有顺磁性, 其比饱和磁化强度随磁性基质含量的增大而增强; TF分子在LDHs层间以长轴略倾斜于LDHs层板的方式呈双层排布; Fe3O4@(TF-LDHs)纳米复合体具有明显的药物缓释性能, 其释放动力学过程符合准二级动力学方程, 颗粒内部扩散为释放过程的速率控制步骤.     

(羟基喜树碱@胆酸钠)-层状双金属氢氧化物纳米杂化物的组装及表征

采用“药物修饰-共组装”法制备了(羟基喜树碱@胆酸钠)-层状双金属氢氧化物纳米杂化物. 先用胆酸钠(SCL)包裹羟基喜树碱(HCPT)形成胶束, 再与微反应器制备的层状双氢氧化物(LDH)纳米片共组装形成纳米杂化物, 其载药量可达12.9%, 杂化物中HCPT以高生物活性的内酯形式存在. 采用聚乙二醇(PEG)和羧甲基纤维素(CMC)分别对所制备的(HCPT@SCL)-LDH纳米杂化物进行了表面修饰, 结果表明, 纳米杂化物的分散性得到明显改善; PEG的修饰效果优于CMC, 所获得的PEG-(HCPT@SCL)-LDH杂化物的平均粒径可小至约70 nm, 具有良好的分散性和药物缓释效果. 其药物释放过程可用准二级动力学方程描述, 颗粒内部扩散是药物释放过程的控制步骤.     

甲氨蝶呤/层状双金属氢氧化物的粒径调控及缓释性能研究

在乙醇-水混合体系中, 以氨水为沉淀剂共沉淀合成了甲氨蝶呤/层状双金属氢氧化物(MTX/LDH)纳米复合物, 首次采用控制沉淀剂滴加速率的方式来调控其粒径. 利用X-射线衍射(XRD)、透射电镜(TEM)和红外光谱(FT-IR)等表征手段, 对其结构及形貌进行了表征. 研究表明: MTX分子以单层倾斜方式插入LDH层间, 随着滴加速率不同, MTX在层间的倾斜角度发生了变化; 沉淀剂滴加速率对产物的结晶度、粒径和层间排列方式都有影响, 当沉淀剂滴加速率为0.100 mL/s时, 得到的MTX/LDH纳米复合物的结晶度最高, 粒径最大. 在磷酸缓冲液中考察了不同粒径MTX/LDH纳米复合物的缓释性能, 结果表明: 小粒径的MTX/LDH纳米复合物的载药量要高于大粒径的; 当MTX阴离子在层间的倾斜角度相似时, 粒径小的粒子释放速率较慢, 缓释效果优于粒径大的. 尤为重要的是我们探索出一条保证复合物阴离子在层间的倾斜角度相似的情况下, 制备不同粒径纳米复合物的新途径.     

Synthesis and characterization of 5-fluorocytosine intercalated Zn-Al layered double hydroxide

In this paper, the intercalation of 5-fluorocytosine (5-FC) into a layered inorganic host, Zn-Al layered double hydroxide (LDH), has been carried out using coprecipitation method to obtain 5-FC/LDH nanohybrids. The intercalated amount (A_In) of 5-FC into the LDH is remarkably dependent on the molar ratio (R_F/M) of 5-FC to metal ions and the pH of coprecipitation system. The morphology of 5-FC molecules in 5-FC/LDH nanohybrids is dependent on the A_In. It is interestingly found that the morphology of the nanohybrid particles may be changed with the increase of R_F/M from hexagonal plate particles to threadlike particles. The in vitro drug release from the nanohybrids is remarkably lower than that from the corresponding physical mixture and pristine 5-FC at either pH 4.8 or pH 7.5. In addition, the release rate of 5-FC from the nanohybrid at pH 7.5 is remarkably lower than that at pH 4.8, this is due to a possible difference in the release mechanism. The obtained results show these drug-inorganic nanohybrids can be used as a potential drug delivery system.     

Zn/Al/Tyr摩尔比对Tyr/Zn-Al-LDH纳米复合物的影响

The intercalation of amphoteric amino acid tyrosine （Tyr） into LDH by co-precipitation method was systematically studied. The influence of initial molar ratios （R） of LDH to Tyr has also been examined. Powder X-ray diffraction, Fourier transform infrared spectroscopy, specific surface areas and pore size distributions, and thermal analysis have been employed for the characterization of the nanocomposites. The nanohybrids were found to have an expanded layered structure except the samples prepared with low R values, indicating that the biomolecules were intercalated into the gallery as anions. The intercalation of amino acids resulted in the increase of the surface areas and pore volumes, and the value of surface areas and pore volumes increased with enhancement of biomolecules intercalated. TEM analysis revealed that with increasing biomolecules into the gallery, the nanohybrids were changed from hexagonal particles to spherical ones. Moreover, the configuration of Tyr anions was varied under different R values, changed from monolayer to bilayers with more biomolecules intercalating into the gallery.     

Synthesis and release behavior of composites of camptothecin and layered double hydroxide

A simple method, reconstruction of calcinated layered double hydroxides (CLDH) in an organic (ethanol)-water mixed solvent medium containing drug, was developed to intercalate partially a non-ionic and poorly water-soluble drug (camptothecin) into the gallery of layered double hydroxides (LDHs) to form the drug-LDH composites. The purpose of choosing organic-water mixed solvent is to increase remarkably the solubility of camptothecin (CPT) in the reconstruction medium. A probable morphology of CPT molecules in the gallery of LDHs is that CPT molecules arrange as monolayer with the long axis parallel to the LDH layers. The in vitro drug release from the composites was remarkably lower than that from the corresponding physical mixture, which shows these drug-inorganic composites can be used as a potential drug delivery system.     

Studies on Mechanochemical Method to Synthesize LDH Nanoparticles

Magnesium‐ferrum layered double hydroxide (Mg‐Fe‐LDH) and zinic‐aluminum layered double hydroxide (Zn‐Al‐LDH) compounds were prepared through a mechanochemical method. The influence of molar ratio of M²⁺ to M³⁺ (R value) on the property of LDH nanoparticles has been studied and the results showed that R=3:1 is the optimum value for the both samples. Besides pure water, the mixture of water and ethanol with the volume ratio of 3:1 is also used to wash the precipitates and used as suspending agent during the peptization process and our results showed that the addition of ethanol can improve the monodispersity of LDH nanoparticles greatly.     

Synthesis and characterization of Naproxen intercalated Zn–Al layered double hydroxides

In this paper, naproxen was intercalated into Zn–Al layered double hydroxides (LDHs) by ion exchange method to obtain naproxen/LDHs nanohybrids. The effects of the contact time, the composition, and the structural charge density (σ _S,T ) and the specific surface area of LDHs, and pH value on the uptake of naproxen on LDHs, and the release of naproxen from the naproxen/LDHs nanohybrids were investigated. The adsorption isotherm curves of naproxen on the LDHs obey the Langmuir equation, and apparent monolayer capacity (A _m) in units of mmol m⁻² increases with the increase of the σ _S,T value of the LDHs samples. The release rate of naproxen from the naproxen/LDHs nanohybrids decreases with the increase of the σ _S,T value of the LDHs samples and is much lower than that of naproxen troche, indicating that the naproxen/LDHs nanohybrid is an efficient drug-controlled release system. In the pH range of 6~11.5, the uptake amount (A _eq) of naproxen on the LDHs decreases with the increase of pH value. The A _m values of LDHs(Cl⁻) are much higher than that of , which may contribute to that LDHs(Cl⁻), which has a stronger anion exchange ability than . The naproxen molecules are possibly adsorbed on each surface of the basal layer of LDHs. In other words, a bilayer is formed in the gallery of LDHs.     

Synthesis and characterization of 10-hydroxycamptothecin – sebacate – layered double hydroxide nanocomposites

10-Hydroxycamptothecin (HCPT) as a hydrophobic anticancer drug brings many challenges in the clinical applications due to its poor water solubility and the presence of a chemically unstable lactone ring. In this work, the nanocomposites of HCPT intercalated layered double hydroxide (LDH) were prepared by a secondary intercalation method, and the encapsulated HCPT could keep the biologically active lactone form. A Zn–Al–NO₃ LDH was pillared with sebacate anions by a co-precipitation method in an aqueous medium, and then HCPT was intercalated into the LDH's gallery via hydrophobic interaction in an ethanol medium. The parallel alkyl chains of perpendicularly arranged sebacate anions in the LDH gallery provide a hydrophobic space for the drug intercalation. The in vitro release kinetics of HCPT from the nanocomposites could be fitted with the pseudo-second-order kinetic model, and the diffusion of HCPT through the LDH particles played an important role in controlling the drug release. The nanocomposites can be considered as a potential drug delivery system.     

One‐pot Synthesis of CdS Nanocrystals Hybridized with Single‐Layer Transition‐Metal Dichalcogenide Nanosheets for Efficient Photocatalytic Hydrogen Evolution

Exploration of low‐cost and earth‐abundant photocatalysts for highly efficient solar photocatalytic water splitting is of great importance. Although transition‐metal dichalcogenides (TMDs) showed outstanding performance as co‐catalysts for the hydrogen evolution reaction (HER), designing TMD‐hybridized photocatalysts with abundant active sites for the HER still remains challenge. Here, a facile one‐pot wet‐chemical method is developed to prepare MS₂–CdS (M=W or Mo) nanohybrids. Surprisedly, in the obtained nanohybrids, single‐layer MS₂ nanosheets with lateral size of 4–10 nm selectively grow on the Cd‐rich (0001) surface of wurtzite CdS nanocrystals. These MS₂–CdS nanohybrids possess a large number of edge sites in the MS₂ layers, which are active sites for the HER. The photocatalytic performances of WS₂–CdS and MoS₂–CdS nanohybrids towards the HER under visible light irradiation (>420 nm) are about 16 and 12 times that of pure CdS, respectively. Importantly, the MS₂–CdS nanohybrids showed enhanced stability after a long‐time test (16 h), and 70 % of catalytic activity still remained.     

Porous film fabricated by a thermoresponsive polymer poly(N-isopropylacrylamide-co-butylmethacrylate) with enhanced hydrophobicity

In this paper, two charge-neutral and poorly water-soluble bactericides (BC), hexaconazole and triadimenol, were first encapsulated in micelles derived from anionic surfactant, calcium dodecylbenzenesulfonate (DBS), and then were successfully intercalated into the gallery of Mg–Al layered double hydroxides (LDHs) by using ion exchange, coprecipitation and reconstruction methods, respectively, to obtain BC–LDHs nanohybrids. The loading amounts of hexaconazole-LDHs nanohybrids are obviously higher than those of triadimenol-LDHs nanohybrids. The release kinetics of bactericides from the nanohybrids was investigated. It was found that the bactericide release kinetic processes of the nanohybrids can be described with pseudo-second-order model. The initial release rates and equilibrium percent releases of the nanohybrids are obviously dependent of synthesis methods. The nanohybrids can well control the release of bactericides, showing they are a potential pesticide controlled-release formulation.