Thermodynamics and thermochemistry of kinetic (real) phase diagrams involving solids

A theoretical analysis of the formation of materials with metastable microstructures under non-ideal and highly non-equilibrium conditions is presented.

---

Zusammenfassung Es wird eine theoretische Untersuchung der Bildung von Stoffen mit metastabilen MikroStrukturen unter nichtidealen Bedingungen weitab vom Gleichgewicht dargelegt.

---

.

     

Excess heat of mixing of binary mixtures of pyridine withn-alkanes at 313.15 K

The molar excess enthalpies of binary mixtures of pyridine with C₆–C₉ n-alkanes have been measured at 313.15 K in the entire composition range. The measuredH ^E values were compared with those calculated by means of the Prigogine-Flory-Patterson theory and by the ERAS method.

---

Zusammenfassung Die molaren Überschußenthalpien binärer Mischungen von Pyridin mit C₆–C₉ n-Alkanen wurden bei 313,15 K im ganzen Zusammensetzungsbereich gemessen. Die gemessenenH ^E Werte wurden mit denen verglichen, die mit Hilfe von Prigogine-Flory-Patterson Theorie und nach der ERAS-Methode berechnet wurden.

---

313,5 n- (₆-₉) ce . -- (ERAS).

     

Precipitation of iron catalysts for the Fischer-Tropsch synthesis

The batch Fischer-Tropsch wise precipitation of iron catalysts for the synthesis in the pH range of 4.60 to 7.91 is described in detail. Each step of the precipitation has been controlled by measurements of the relevant parameters to produce definite catalysts. Factors influencing the reproducibility are shortly discussed.

---

- pH=4,60–7,91. . , .

     

Interaction of super-finely dispersed Al powders with water

Interaction of super-finely dispersed Al powders (SFDP) with water is characterized by the presence of a considerable section on the kinetic curves, where the conversion rate is maximum and its degree is as high as =0.5–0.7. It is suggested that the essential factor accounting for the conversion kinetics and the phase composition of its products is the self-heating of Al particles.

---

() , , () 0,5–0,7. , .

     

Chemical oscillations in the uncatalyzed bromate oxidation of hydroquinone and nitrophenols

Chemical oscillatory behavior in the uncatalyzed bromate oxidation of hydroquinone and nitrophenols is reported. The reaction is strongly inhibited by stirring. Effect of one-electron redox couples (EZ catalysts) on the system is described.

---

. . - ( EZ) .

     

[Fe(phen)3]2+ aquation in aqueous polyacrylamide solution

The aquation of tris(1, 10-phenanthroline) iron(II) has been studied in aqueous polyacrylamide solutions. The rate increases up to 2.8 times at low polymer concentrations, and subsequently decreases. These effects are attributed to changes in the local water activity in the region of the complex.

---

(1, 10-) (II) . 2,8 , . .

     

Reduction of higher polymethylbenzenes by the rapid cation exchange of H-mordenite in the conversion of methanol to hydrocarbons

The product distribution in methanol conversion on mordenite is changed by potassium ion exchange depending on the method of ion exchange. The rapid exchange method was the most effective to suppress the formation of higher polymethylbenzenes.

---

. .

     

Discrimination of active sites for ethylene homologation and ethylene metathesis on molybdena silica catalyst

Active sites for ethylene homologation (3C₂H₄2C₃H₆) and ethylene metathesis (C₂H₄–¹²C₂+C₂H₄–¹³C₂2C₂H₄–¹³C₁) were discriminated by adding platinum to a reduced molybdena silica catalyst, and the former was presumed to be composed of several molybdenum species, while the latter was presumed to be composed of one molybdenum species.

---

(3C₂H₄2C₃H₆) (C₂H₄–¹²C₂+C₂H₄–¹³C₂2C₂H₄–¹³C₁) . , , .

     

An addition scheme of heat capacities of linear macromolecules

The prior developed addition scheme of heat capacities is expanded to macromolecules that contain non-C-bonds in the backbone. Tables for 31 groups are given. 713 data points which have been averaged for group contributions for which more than one measurement was available showed a deviation of 0.1±1.5% (internal consistency). Calculated heat capacities of homopolymers and copolymers for which independent measurements have been made showed average errors of 0.60% and a standard deviation of ±2.35% (177 data points).

---

Zusammenfassung Das früher entwickelte Additionsschema für Wärmekapazitäten wird auf Makromoleküle erweitert, die Nicht-C-Bindungen im Stützgerüst enthalten. Tabellen für 31 Gruppen sind angegeben. Von 713 Meßdaten wurden für Gruppenbeiträge, für die mehr als ein Meßwert zur Verfügung stand, Mittelwerte berechnet, wobei sich eine Abweichung von 0.1±1.5% (interne Konsistenz) ergab. Berechnete Wärmekapazitäten von Homopolymeren und Kopolymeren, für die unabhängige Messungen ausgeführt wurden, weisen einen mittleren Fehler von 0.60% bei einer Standardabweichung von 2.35% auf (177 Meßwerte).

---

, . 31 . 713 , , 0.1±1.58% ( ). , , 0,60% ±2,35% (177 ).

---

---

This work was supported by the National Science Foundation of the US, Polymers Program, Grant # DMR 8317097.     

Investigation of thermal degradation of polymers containing chlorine by thermogravimetry

The thermal degradation of chlorine-containing polymers used in a rubber technology has been investigated in a nitrogen atmosphere. The characteristics of degradation have been compared on the basis of thermogravimetry, carbon residues and chlorine elimination. The observed structure-dependent differences in degradation of the investigated polymers are discussed.

---

Zusammenfassung Die thermische Zersetzung von in der Kautschuk-Technologie verwendeten chlorhaltigen Polymeren wurde unter Stickstoff untersucht.Die Charakteristika der Zersetzung durch die Thermogravimetrie, Kohlenrückstand und Chlorabspaltung wurden verglichen. Die in der Zersetzung der untersuchten Polymere in Abhängigkeit von ihrer Struktur beobachteten Unterschiede wurden diskutiert.

---

Résumé On a étudié, en atmosphère d'azote, la dégradation thermique des polymères contenant du chlore, utilisés dans la technologie du caoutchouc.On a comparé les caractéristiques de la dégradation par thermogravimétrie, formation d'un résidu de carbone et élimination du chlore. On discute les différences observées dans la dégradation des polymères étudiés suivant leur structure.

---

, . . .

     

Collisional energy transfer in the decomposition of 2-methyloxetane and 3-methyloxetane, II. Gas/wall collisions

The variable encounter method has been applied for the study of gas/wall vibrational energy transfer in the thermal decomposition of 2-methyloxetane and 3-methyloxetane. The average probability of reaction per collision was deduced from the data and was compared with stochastic calculations based on gaussian and exponential energy transfer probability models. The gaussian model fits the experimental data best. Using this model, the average down step energies were 2600 and 2690 cm^–1 for 2-methyloxetane and 3-methyloxetane, respectively, at 750 K, and they decreased with increasing temperature.

---

/ 2- 3-. , . . , 2600 2690 ^–1 750 K 2- 3-, . .

     

Thermal studies on titanyl,zirconyl and hafnyl dithiocarbamato complexes

The dithiocarbamato complexes of titanyl(IV), zirconyl(IV) and hafnyl(IV), abbreviated as MO(S₂CNRR)₂·nH₂O(M=Ti, Zr or Hf,R=H,R=C₅H₉;R=H,R=C₇H₁₁,n=1 for Ti andn=2 for Zr and Hf), were prepared in aqueous medium and characterized by elemental analyses, magnetic susceptibility measurements and IR spectral studies. The thermal behaviour of these compounds under non-isothermal conditions was investigated by thermogravimetric, derivative thermogravimetric and differential scanning calorimctric techniques in nitrogen and oxygen atmospheres. The intermediates obtained at the end of various thermal decomposition steps were identified on the basis of analyses and IR spectral studies. Kinetic parameters, such as apparent activation energy and order of reaction, were determined by the graphical method of Coats and Redfern. The heats of reaction for the different decomposition steps were calculated from the DSC curves.

---

Zusammenfassung Die Thiocarbamato-Komplexe von Titanyl(IV), Zirkonyl(IV) und Hafnyl(IV) der allgemeinen Formel MO(S₂CNRR)₂·n H₂O (M=Ti, Zr oder Hf;R=H, R=C₅H₉;R=H, R=C₇H₁₁;n=1 für Ti undn=2 für Zr und Hf) wurden in wässrigem Medium hergestellt und durch Elementaranalyse, Messung der magnetischen Suszeptibilität und IR-Spektraluntersuchungen charakterisiert. Das thermische Verhalten dieser Verbindungen unter nicht-isothermen Bedingungen wurde durch TG, DTG und DSC in Stickstoff- und Sauerstoffatmosphäre untersucht. Die nach verschiedenen thermischen Zersetzungsschritten erhaltenen Zwischenprodukte wurden durch chemische Analyse und IR-Spektroskopie identifiziert. Kinetische Parameter, wie die scheinbare Aktivierungsenergie und die Reaktionsordnung, wurden nach der graphischen Methode von Coats und Redfern bestimmt. Für die einzelnen Zersetzungsschritte wurden die Reaktionswärmen aus den DSC-Kurven berechnet.

---

, . MO(S₂CNRR)₂·nH₂O (M=I, Zr, Hf,R=H,R ¹=C₅H₉, C₇H₁₁,n=1 I =2 ) , . , . , , . - . .

---

---

The authors are grateful to Dr. Shyam Kumar for helpful discussions.     

Differential scanning calorimetry of chloroquine sulphate exposed to sun,heat and ultraviolet radiation

Chloroquine sulphate, like the phosphate, is an antimalarial formulation widely used in the tropics. The stability of such formulations is therefore of interest in the combat against malaria. A DSC study has been made of the effects of exposure to the sun, heat and UV radiation on the stability of chloroquine sulphate, similarly as performed earlier for chloroquine phosphate. When freshly recrystallized from a water-acetone mixture, chloroquine sulphate exhibits two endothermic peaks, at 169.4° and 204.7°, for the expulsion of crystal water (one molecule) and for the melting process, respectively. The exposure of chloroquine sulphate to the sun, heat and UV radiation leads to splitting of the peak for melting.

---

Zusammenfassung Chloroquine-Sulfat ist ebenso wie das entsprechende Phosphatderivat ein in den Tropen weitverbreitet angewandtes Antimalaria-Präparat. Die Stabilität dieses Präparates hat damit Bedeutung für die Malariabekämpfung. Die vorliegende Arbeit ist eine Erweiterung einer Untersuchung über den Effekt der Einwirkung.von Sonne, Hitze und UV-Strahlen auf die Stabilität von Chloroquine-Phosphat auf Chloroquine-Sulfat. Aus Wasser-Aceton-Mischungen frisch kristallisiertes Chloroquine-Sulfat zeigt zwei endotherme Peaks bei 169,4 und 204,7 °C, die durch Abgabe von Kristallwasser (ein Molekül) bzw. durch den Schmelzvorgang bedingt sind. Wird Chloroquine-Sulfat der Sonne, Wärme oder UV-Licht ausgesetzt, so wird der dem Schmelzvorgang zuzuscheibende Peak aufgespalten.

---

, -, , . . , . , , 169,4 204,7°, , , . , .

     

Studies on the catalytic oxidation of propylene on ferric molybdate

Ferric molybdate is less selective in the partial oxidation of propylene than bismuth molybdate. Its catalytic behavior is similar to that observed on other transition metal molybdates. The intrafacial nature of the reaction is established through kinetic and adsorption measurements.

---

, . . .

     

Influence of the amount of structurally decomposed Y zeolite on the activity of platinum hydrocracking catalysts

On the basis of n-decane transformation, the activity and selectivity of platinum catalysts containing HNaY, as a component of the carrier, were compared. The catalysts differed in the amount of the preserved crystalline structure of the Y-zeolite.

---

- , HNaY . Y.

     

Thermogravimetry. Fast methods for evaluation of kinetic parameters

The paper discusses three fast methods for determination of the reaction order, as follows: the single-point method proposed by Kissinger, Horowitz and Metzger, an original two-point method, and the three-point method suggested by a Gorbachev's paper. These methods cannot elucidate the reaction mechanism, but they can help in the rapid derivation of the apparent kinetic parametersn andE.

---

Zusammenfassung Es wurden drei Methoden zur Schnellbestimmung von Reaktionsordnungen ausgewertet: eine Einpunktmethode von Kissinger, Horowitz und Metzger, eine Zweipunktmethode und eine Dreipunktmethode nach einer Anregung von Gorbachev. Mittels dieser Methoden kann man zwar nicht den Reaktionsmechanismus bestimmen, wohl aber eine schnelle Bestimmung der kinetischen Scheinparametern undE durchführen.

---

: , , , , . , n .

     

The lability of carbon monoxide adsorbed on rhodium

Carbon monoxide which is retained by a rhodium surface after heating to 573 K exchanges with gas phase carbon monoxide at 293 K. The retained species is postulated as *–C=O–*.

---

, 573 , 293 . *–C=O–*.

     

Toluene disproportionation and coke formation over fluorided alumina and hydrogen-mordenite

Toluene transformation was investigated on a fluorided alumina and a protonic mordenite under hydrogen (0.8, 12 bar) and under nitrogen (12 bar). Hydrogen pressure considerably improves the catalytic stability of H-mordenite by inhibiting the formation of coke. Moreover, hydrogen eliminates part of the coke deposited by reaction under nitrogen, and regenerates the activity of the mordenite. On the contrary, hydrogen has no effect in the case of fluorided alumina. The particular behavior of the mordenite is attributed to its very strong acidity.

---

(0,8, 12 ) (12 ). -, . , , , . , - . .

     

Methane synthesis from CO/H2O mixture on supported nickel catalysts, I. Influence of the support on the catalytic properties

The behavior of some supported Ni catalysts for methane synthesis from CO and steam in correlation with the specific metal-support interactions is discussed.

---

CO . .