含有载流子传输功能基团咔唑和噁二唑的有机铕(Ⅲ)配合物的合成及其发光性能

合成了一种含有载流子传输功能基团咔唑和噁二唑的有机铕(Ⅲ)配合物. 在研究了光致发光等性能的同时, 制备了结构为ITO/NPB(40 nm)/2.5%铕(Ⅲ)配合物: CBP(30 nm)/BCP(10 nm)/Alq3(30 nm)/LiF(1 nm)/Al(100 nm)的电致发光器件, 器件在612 nm处有半峰宽为4 nm的高纯度的明亮红光发射, 起亮电压约为6 V, 在17.3 V时达到最大亮度1778 cd/m2.     

混合蓝色和绿色发射的高亮度白色有机电致发光器件

使用星形六苯芴类新材料1,2,3,4,5,6-hexakis(9,9-diethyl-9H-fluoren-2-yl)benzene (HKEthFLYPh)分别制备了三种不同结构的有机电致发光器件. 在结构为indium-tin oxide (ITO)/NPB (40 nm)/HKEthFLYPh (10 nm)/Alq3(50 nm)/Mg:Ag (200 nm)的器件中, 获得了两个电致发光谱峰分别位于435 和530 nm处的明亮白光. HKEth-FLYPh是能量传输层; N,N’-bis-(1-naphthyl)-N,N’-diphenyl-(1,1’-biphenyl)-4,4’-diamine (NPB)是空穴传输层和蓝色发光层; tris(8-hydroxyquinoline)aluminum (Alq3)是电子传输层和绿色发光层. 结果表明, 当驱动电压为15 V时, 器件的最大亮度达到8523 cd·m-2; 在5.5 V时, 器件达到最大流明效率为1.0 lm·W-1. 在电压为9 V时, CIE色坐标为(0.29, 0.34). 此外, 通过改变HKEthFLYPh层的厚度, 发现蓝色发射的相对强度随着HKEthFLYPh层厚度的增加而增强.     

混合蓝色和绿色发射的高亮度白色有机电致发光器件

使用星形六苯芴类新材料1,2,3,4,5,6-hexakis(9,9-diethyl-9H-fluoren-2-y1)benzene(HKEthFLYPh)分别制备了三种不同结构的有机电致发光器件.在结构为indium-tin oxide(ITO)/NPB(40nm)/HKEthFLYPh(10nm)/Alq3(50nm)/Mg:Ag(200nm)的器件中,获得了两个电致发光谱峰分别位于435和530nm处的明亮白光.HKEthFLYPh足能量传输层;N,N'-bis-(1-naphthyl)-N,N'-diphenyl-(1,1'-biphenyl)-4,4'-diamine(NPB)是空穴传输层和蓝色发光层;tris(8-hydroxyquinoline)aluminum(Alq3)是电子传输层和绿色发光层.结果表明,当驱动电压为15V时,器件的最大亮度达到8523cd·m-2;在5.5V时,器件达到最大流明效率为1.01m·W-1.在电压为9V时,CIE色坐标为(0.29,0.34).此外,通过改变HKEthFLYPh层的厚度,发现蓝色发射的相对强度随着HKEthFLYPh层厚度的增加而增强.     

红色磷光喹喔啉铂(II)配合物及其有机电致发光器件的制备

利用2,3-二苯基喹喔啉和氯亚铂酸钾(K2PtCl4)反应, 合成了一种新型喹喔啉铂的配合物(DPQ)Pt(acac), 通过元素分析, 1H NMR测定对配合物结构进行了表征, 结果显示得到的是目标化合物. 利用紫外光谱和荧光光谱对配合物进行了研究. 利用该材料作为磷光染料制备了结构为ITO/NPB (21 nm) /NPB∶7%(DPQ)Pt(acac) (17.5 nm) /BCP (7 nm)/ Alq3 (21 nm)/ Mg∶Ag(10∶1)(120 nm)/Ag(10 nm)的有机电致发光器件(OLED). 结果表明, 该配合物在442和485 nm处存在单重态1MLCT(金属到配体的电荷跃迁)和三重态3MLCT的吸收峰; 在632 nm 处有较强的金属配合物三重态的磷光发射; 该器件的启动电压是5.0 V, 器件的最大亮度为1516 cd·m-2, 外量子效率为0.66%, 流明效率为0.26 lm·W-1, 是一种红色磷光材料.     

红色磷光喹喔啉铂(II)配合物及其有机电致发光器件的制备

利用2,3-二苯基喹喔啉和氯亚铂酸钾(K2PtCl4)反应,合成了一种新型喹喔啉铂的配合物(DPQ)Pt(acac),通过元素分析,1HNMR测定对配合物结构进行了表征,结果显示得到的是目标化合物.利用紫外光谱和荧光光谱对配合物进行了研究.利用该材料作为磷光染料制备了结构为ITO/NPB(21nm)/NPB∶7%(DPQ)Pt(acac)(17.5nm)/BCP(7nm)/Alq3(21nm)/Mg∶Ag(10∶1)(120nm)/Ag(10nm)的有机电致发光器件(OLED).结果表明,该配合物在442和485nm处存在单重态1MLCT(金属到配体的电荷跃迁)和三重态3MLCT的吸收峰;在632nm处有较强的金属配合物三重态的磷光发射;该器件的启动电压是5.0V,器件的最大亮度为1516cd·m-2,外量子效率为0.66%,流明效率为0.26lm·W-1,是一种红色磷光材料.     

氧化铟锡(ITO)自组装修饰及其对有机电致发光器件性能的影响

设计合成了一种新型的有机硅氧烷Cz-Si,并将其用于ITO自组装修饰。制备的Cz-Si具有较好的稳定性,可以在空气中对ITO进行自组装修饰,实验操作简单。为考察ITO自组装修饰对有机电致发光器件性能的影响,分别以修饰后的ITO(ITO/SAM)及不修饰的ITO(unmodified)作阳极,制备了一系列有机电致发光器件ITO/SAM(orunmodified)/NPB(40~50nm)/Alq₃(60nm)/LiF(1.0nm)/Al。实验结果表明,ITO自组装修饰后器件性能可以得到显著提升,研究认为这与其调控ITO/有机层界面的电子能级、粗糙度以及界面一致性有关。     

氧化铟锡(ITO)自组装修饰及其对有机电致发光器件性能的影响

设计合成了一种新型的有机硅氧烷Cz-Si,并将其用于ITO自组装修饰。制备的Cz-Si具有较好的稳定性,可以在空气中对ITO进行自组装修饰,实验操作简单。为考察ITO自组装修饰对有机电致发光器件性能的影响,分别以修饰后的ITO(ITO/SAM)及不修饰的ITO(unmodified)作阳极,制备了一系列有机电致发光器件ITO/SAM(or unmodified)/NPB(40~50 nm)/Alq₃(60 nm)/LiF(1.0 nm)/Al。实验结果表明,ITO自组装修饰后器件性能可以得到显著提升,研究认为这与其调控ITO/有机层界面的电子能级、粗糙度以及界面一致性有关。     

多芳胺取代均三嗪的合成及其光电性能的研究

设计合成了一个新的带有三支链的均三嗪衍生物分子: 2,4,6-三[4-(N,N-二对甲苯基)-苯胺乙基]均三嗪(TBTN); 用1H NMR, 13C NMR, IR, MS (MALDI-TOF)和元素分析确认了化合物的结构. 研究了该化合物的紫外吸收光谱、荧光光谱、电致发光光谱等性能, 用TBTN组装发光器件, 实验结果显示TBTN为发光层时, 该器件能发出稳定白光. 器件结构为ITO/2-TNATA (30 nm)/NPB (20 nm)/TBTN (30 nm)/Alq3 (30 nm)/LiF (0.5 nm)/Al, 在电压为15 V获得最大亮度是1523 cd/m2, 在驱动电压范围内CIE(国际照明委员会)坐标稳定并在白色等能区内.     

基于N-对甲氧苯基咔唑-2-乙烯基-8-羟基喹啉锌的白色和黄色有机电致发光器件的性能

通过研究新型荧光染料N-对甲氧苯基咔唑-2-乙烯基-8-羟基喹啉锌(MoBCzHQZn)的电致发光(EL)特性, 发现MoBCzHQZn具有较强的发光特性和空穴传输特性, 利用此特性制备了非掺杂型的有机电致白光器件和掺杂型的有机电致黄光器件. 白光器件的结构为ITO/2T-NATA(20 nm)/MoBCzHQZn(25 nm)/NPBX(13 nm)/BCP(8nm)/Alq3(34 nm)/LiF(0.5 nm)/Al, 器件在15 V电压下实现了白光发射, 色坐标为(0.3719, 0.3275), 最大发光亮度为3414 cd·m-2, 在14 V 电压下的最大发光效率为1.69 cd·A-1、黄光器件的结构为ITO/2T-NATA(20 nm)/CBP:6%Ir(ppy)3:10%MoBCzHQZn(25 nm)/TPBi:6%Ir(ppy)3(47 nm)/LiF(0.5 nm)/Al, 器件在15 V电压下实现了黄绿光发射, 色坐标为(0.3590, 0.5787), 最大发光亮度为11073 cd·m-2, 在9 V电压下的最大发光效率为2.51 cd·A-1.     

稀土配合物的光致和电致发光性能的研究

合成了一种新型的稀土配合物Tb(acac)3dad, 讨论了其光致发光的性质 . 以其为发射层制备了结构为ITO/TPD (50 nm)/Tb(acac)3dad (75 nm)/PBD (50 nm)/Al (400 nm) 的电致发光器件, 该器件的启动电压为7 V, 18 V时得到了最大亮度为62 cd·m -2, 发现器件的电致发光光谱与配合物Tb(acac)3dad的光致发光光谱有明显不同.     

Bright White Organic Light-emitting Device Based on 1,2,3,4,5,6-Hexakis（9,9-diethyl-9H-fluoren-2-yl）benzene

Organic light-emitting devices(OLEDs) with the structure of indium-tin-oxide(ITO)/N,N'-bis-(1-naphthyl)-N,N'-diphenyl-(1,1'-biphenyl)-4,4'-diamine(NPB)/2,9-dimenthyl-4,7-diphenyl-1,10-phenanthroline(BCP)/tris(8-hydroxyquinoline)aluminum(Alq3)/Mg:Ag or that of ITO/NPB/1,2,3,4,5,6-hexakis(9,9-diethyl-9H-fluoren-2-yl)benzene(HKEthFLYPh)/Alq3/Mg:Ag were studied.White light emission was achieved with the two devices when the thicknesses of BCP and HKEthFLYPh were 1.5 nm(device B) and 5 nm(device II),respectively...     

Optimization of high-performance blue organic light-emitting diodes containing tetraphenylsilane molecular glass materials

Molecular glass material (4-(5-(4-(diphenylamino)phenyl)-2-oxadiazolyl)phenyl)triphenylsilane (Ph(3)Si(PhTPAOXD)) was used as the blue light-emitting material in the fabrication of high-performance organic light-emitting diodes (OLEDs). In the optimization of performance, five types of OLEDs were constructed from Ph(3)Si(PhTPAOXD): device I, ITO/NPB/Ph(3)Si(PhTPAOXD)/Alq(3)/Mg:Ag, where NPB and Alq(3) are 1,4-bis(1-naphylphenylamino)biphenyl and tris(8-hydroxyquinoline)aluminum, respectively; device II, ITO/NPB/Ph(3)Si(PhTPAOXD)/TPBI/Mg:Ag, where TPBI is 1,3,5-tris(N-phenylbenzimidazol-2-yl)benzene; device III, ITO/Ph(2)Si(Ph(NPA)(2))(2)/Ph(3)Si(PhTPAOXD)/TPBI/Mg:Ag, where Ph(2)Si(Ph(NPA)(2))(2) is bis(3,5-bis(1-naphylphenylamino)phenyl)-diphenylsilane, a newly synthesized tetraphenylsilane-containing triarylamine as hole-transporting material; device IV, ITO/Ph(2)Si(Ph(NPA)(2))(2)/NPB/Ph(3)Si(PhTPAOXD)/TPBI/Mg:Ag; device V, ITO/CuPc/NPB /Ph(3)Si(PhTPAOXD)/Alq(3)/LiF/Al, where CuPc is Cu(II) phthalocyanine. Device performances, including blue color purity, electroluminescence (EL) intensity, current density, and efficiency, vary drastically by changing the device thickness (100-600 A of the light-emitting layer) and materials for hole-transporting layer (NPB and/or Ph(2)Si(Ph(NPA)(2))(2)) or electron-transporting material (Alq(3) or TPBI). One of the superior OLEDs is device IV, showing maximum EL near 19 000 cd/m(2) with relatively low current density of 674 mA/cm(2) (or near 3000 cd/m(2) at 100 mA/cm(2)) and high external quantum efficiency of 2.4% (1.1 lm/W or 3.1 cd/A). The device possesses good blue color purity with EL emission maximum (lambda(max)(EL)) at 460 nm, corresponding to (0.16, 0.18) of blue color chromaticity on CIE coordinates. In addition, the device is reasonably stable and sustains heating over 100 degrees C with no loss of luminance on the basis of the annealing data for device V. Formation of the exciplex at the interface of NPB and Ph(3)Si(PhTPAOXD) layers is verified by EL and photoluminescence (PL) spectra studies on the devices with a combination of different charge transporting materials. The EL due to the exciplex (lambda(max)(EL) at 490-510 nm) can be properly avoided by using a 200 A layer of Ph(3)Si(PhTPAOXD) in device I, which limits the charge-recombination zone away from the interface area.     

吡唑啉衍生物作为空穴传输层在电致发光材料中的应用

我们曾报道过有关1,3二苯基吡唑啉衍生物的光谱和光物理行为^[1,2],并详细地研究了它们在受激发后的辐射和非辐射衰变过程.该类化合物作为一种良好的光致发光材料,由于存在着分子内共轭的电荷转移结构,因此表现出较强的光诱导分子极化能力,可用作为有机非线性光学材料^[3]、光折变材料等.此外,还发现该类化合物在组合型光导器件中可用作空穴传输层材料.既然这类化合物兼具光致发光和空穴传输功能,很自然的会考虑到,它是否也能用作为一种有机的电致发光(EL)材料.有机电致发光材料的重要性自不待言,特别近年来许多科学家致力于此,因此进展很快.但寻找新的高效材料,不论是用作主要的发光层或其它的辅助性化合物,仍在继续.本简报即是对上述化合物用作EL材料的初步研究.     

Metal-free phthalocyanine single crystal: Solvothermal synthesis and near-infrared electroluminescence

A metal-free purple H₂Pc single crystal was synthesized by a facile solvothermal method, and its solubility and near-infrared (NIR) optical properties were also investigated due to its potential applications as a light-emitting layer for OLEDs. The H₂Pc single crystal is insoluble in 1-chlorine naphthalene and other organic solvents. It gives a wide absorption in the range from 620 nm to 679 nm and a wide emission in near 922 nm. As an active light-emitting layer, H₂Pc was employed to fabricate electroluminescent (EL) devices with a structure of ITO/NPB (30 nm)/Alq₃:H₂Pc (30 nm)/BCP (20 nm)/Alq₃ (20 nm)/Al. The emission center is at 936 nm when the H₂Pc doping concentration is 20 wt%. The doping concentration strongly governs the emission intensity. When doping concentration decreases from 10 wt% to 1 wt%, the emission intensity remarkably fades, and simultaneously the emission center undergoes a blue shift.     

Efficient red-emitting cyclometalated Iridium(III) complexes containing lepidine-based ligands

Heteroleptic cyclometalated iridium(III) complexes featuring lepidine-based ligands and acetyl acetone auxiliary ligand are synthesized. Multiple lowest energy absorption bands are observed for these complexes indicating substantial mixing of the singlet and triplet levels. All the complexes emit orange or red color in dichloromethane solutions with lifetimes in the range 1.6-3.7 micros. The emission in the complexes probably originates from the (3)MLCT state. The complexes are applied as emitting guests in LED devices of the structure ITO/HTL(BPAPF or NPB)/6% Ir in CBP/BCP/Alq(3)/LiF/Al. They exhibit excellent device characteristics with an orange to red EL profile.     

Synthesis,structures, and electroluminescence properties of a 1D zinc(II) coordination polymer containing both dicyanamide and pyrazinamide ligands

A 1D coordination polymer, {[Zn(μ_1,5-dca)₂(PZA)₂](PZA)₂}_n (1), has been synthesized and characterized by single-crystal X-ray crystallography. The coordination modes of the dicyanamide (dca) and the pyrazinamide (PZA) were inferred by IR spectroscopy. The complex was applied to organic electroluminescent (EL) devices as the emitting materials. The electroluminescent device of ITO/NPB (40 nm)/Zn polymer: CBP (30 nm) (30 nm)/BCP (15 nm)/Alq (30 nm)/LiF (1 nm)/Al (100 nm) was fabricated. The EL device emits cyan light originating from this complex with high brightness and efficiencies. For 1, a maximum luminance of 34.9 cd/A was achieved at 9 V.     

中位四(1-苯基吡唑-4-基)卟啉掺杂空穴传输材料的红色有机电致发光器件(英文)

使用中位-四(1-苯基吡唑-4-基)卟啉(TPPyPH2)掺杂空穴传输材料N,N′-二苯基-N,N′-双(4-甲苯基)-1,1′-二苯基-4,4′-二胺(TPD)制备了红色有机电致发光器件.因为TPD的发射光谱与TPPyPH2的吸收光谱具有更大的光谱重叠,为了得到更为有效的从主体材料TPD向红光染料TPPyPH2的能量传递,我们使用TPD代替传统的8-羟基喹啉铝(Alq3)作为主体发光材料.器件在680nm处具有纯的红光发射峰;通过使用Alq3电子传输层以及使用Alq3共掺杂发光层的方法,使器件的发光性能得到了改善,结构为ITO/Alq3+TPPyPH2+TPD(50nm)/Alq3(30nm)/Al的器件的最大发光亮度为177cd/m2.