Tysonite-type solid solutions in the BiF<Subscript>3</Subscript>-BiOF-BaF<Subscript>2</Subscript> system: Polymorphism and anionic conductivity

Tysonite solid solutions Bi_1−x Ba _x O _y F_3−x−2y in the BiF₃-BiOF-BaF₂ system were obtained by solid-phase synthesis in sealed copper tubes in an argon atmosphere at 873 K with subsequent quenching. The solid solutions were studied by X-ray diffraction, electron diffraction, and impedance spectroscopy. On the basis of X-ray powder diffraction data, the homogeneity ranges of the tysonite solid solutions were determined and the scheme of their location in the BiF₃-BiOF-BaF₂ system at 873 K was suggested. Aliovalent substitutions in both the cation and anion sublattices Ba²⁺ → Bi³⁺ and O²⁻ → F⁻ made it possible to vary the concentration of anion vacancies. It was found that, at a high concentration of anion defects at 873 K, the hexagonal tysonite modification with space group P6₃/mmc is stable. With a decrease in the defect concentration, the trigonal tysonite modification with space group $ P\bar 3c1 $ P\bar 3c1 becomes stable. An ordered monoclinic tysonite-type modification BiO _y F_{3 − 2y} (0.13 < y < 0.23) was revealed. For the homogeneity ranges of all tysonite phases, dependences of the unit cell parameters and conductivity on the composition along the sections with a constant barium or oxygen content were reported. The most probable location of oxygen anions and anion vacancies in the tysonite structure is discussed.     

Structure and electric properties of Na<Subscript>2</Subscript>SO<Subscript>4</Subscript>-NaPO<Subscript>3</Subscript> glasses

The influence of the SO₄²⁻ ion on the temperature and concentration dependences of electric conductivity and the structure of sodium phosphate oxide glasses was studied. The increased electric conductivity of sulfate-phosphate glasses was explained by the formation of mixed sulfate-phosphate fragments with terminal SO₄²⁻ ions in the structure of glasses in the Na₂SO₄-NaPO₃ system. The dissociation energies of the sodium sulfate fragments are lower than those of pure oxide sodium phosphate structural units. As a result, the number of dissociated sodium ions increases, the activation energy of electric conductivity falls, and the conductivity (at 25°C) increases approximately 270-fold relative to the conductivity of NaPO₃. The arrangement of SO₄²⁻ ions in the structure was evaluated from the IR spectra of the glasses.     

Determination of the enthalpy of fusion of K<Subscript>3</Subscript>TaO<Subscript>2</Subscript>F<Subscript>4</Subscript> and KTaF<Subscript>6</Subscript>

Areas of fusion and crystallization peaks of K₃TaO₂F₄ and KTaF₆ were measured using the DSC mode of a high-temperature calorimeter (SETARAM 1800 K). On the basis of these quantities, considering the temperature dependence of the calorimeter sensitivity, values of the fusion enthalpy of K₃TaO₂F₄ at the fusion temperature of 1181 K of (43 ± 4) kJ mol⁻¹ and of KTaF₆ at the fusion temperature of 760 K of (8 ± 1) kJ mol⁻¹ were determined.     

Ion mobility,phase transitions,and conductivity of crystal phases in KF-CsF-SbF<Subscript>3</Subscript>-H<Subscript>2</Subscript>O system according to data of NMR and impedance spectroscopy

The methods of NMR, thermogravimetric analysis, and impedance spectroscopy were used to study ion mobility, phase transitions, and ion conductivity in crystal phases in the KF-CsF-SbF₃-H₂O system. Analysis of ¹⁹F NMR spectra allowed tracing the dynamics of ion movement in the fluoride sublattice under temperature variations, determining their types and temperature ranges, in which they are implemented. The observed phase transitions in potassium-cesium fluoroantimonates(III) are phase transitions to the superionic state. It is found that the predominant form of ion movement in the high-temperature modifications formed as a result of phase transitions becomes diffusion of fluoride ions. According to the results of electrophysical studies the K_{1 − x} Cs _x SbF₄ (x ≤ 0.2) high-temperature phases are superionic. Their conductivity reaches the values of ∼10⁻² to 10⁻³ S/cm at 463–483 K. The high-temperature phases are stabilized under cooling, which results in a significant increase in conductivity at the room temperature.     

The impedance of the Ag-CeF<Subscript>3</Subscript>/CeF<Subscript>3</Subscript> bicrystal-Ag system

The impedance spectra of CeF₃/CeF₃ bicrystal (two single crystals separated by a single intercrystalline boundary) between Ag-electrodes are studied over a 135 to 410 K temperature interval (including temperatures below room temperature). The bicrystal was prepared by thermal-diffusion welding under a pressure of 1.5 × 10⁷ Pa at 1473 K in vacuum (∼10⁻² Pa). It is shown that the intercrystalline boundary affects but insignificantly the bicrystal bulk impedance. The CeF₃/CeF₃ ionic conductivity is 3 × 10⁻⁶ S/cm at 293 K; it is mainly determined by transfer processes in the single crystal bulk.     

Lithium-conducting solid electrolytes of Li<Subscript>4</Subscript>GeO<Subscript>4</Subscript>-Li<Subscript>3</Subscript>PO<Subscript>4</Subscript> system with additions of zirconium ions

The effect of partial substitution of Zr⁴⁺ ions for Ge4+ ions in highly conducting lithium-cationic solid electrolyte Li_3.75Ge_0.75P_0.25O₄ is studied. It is found that the introduction of zirconium ions considerably raises the conductivity of basic electrolyte in the high-temperature range. For the optimal composition, the conductivity is 2.82 × 10⁻¹ S cm⁻¹ at 400°C and 1.55 S cm⁻¹ at 700°C. Possible reasons for the effects are discussed.     

Enthalpy of formation of BaCe<Subscript>0.9</Subscript>In<Subscript>0.1</Subscript>O<Subscript>3−δ</Subscript>(s)

Enthalpy of formation of the perovskite-related oxide BaCe_0.9In_0.1O_2.95 has been determined at 298.15 K by solution calorimetry. Solution enthalpies of barium cerate doped with indium and mixture of BaCl₂, CeCl₃, InCl₃ in ratio 1:0.9:0.1 have been measured in 1 M HCl with 0.1 M KI. The standard formation enthalpy of BaCe_0.9In_0.1O_2.95 has been calculated as −1611.7±2.6 kJ mol⁻¹. Room-temperature stability of this compound has been assessed in terms of parent binary oxides. The formation enthalpy of barium cerate doped by indium from the mixture of binary oxides is Δ_ox H ⁰ (298.15 K)=−36.2±3.4 kJ mol⁻¹.     

A Novel Uranyl Complex with Dimeric Lacunary Polyoxoanion: [(A-α-SiW<Subscript>9</Subscript>O<Subscript>33</Subscript>)<Subscript>2</Subscript>K{UO<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)}<Subscript>2</Subscript>]<Superscript>11−</Superscript>

A novel uranyl complex with dimeric lacunary polyoxoanion like open-mouthed clam, Na₅[(A-α-SiW₉O₃₃H₃)₂K{UO₂(H₂O)}₂], was prepared and characterized by elemental analysis, infrared and ultraviolet–visible spectroscopy and single crystal X-ray diffraction. In the anion, two A-α-SiW₉O₃₄¹⁰⁻ groups share two terminal oxygen atoms O_d′ derived from removal of three corner-shared W atoms from saturated α-Keggin anion, forming a dimeric anion with an open mouth in which potassium ion and uranyl ions are coordinated. Uranium atom adopts a pentagonal bipyramidal geometry. The coordinating anions are linked by sodium ions via coordination of terminal or bridging oxygen atoms, forming two-dimensional layer arrangement. Between the layers are the hydrogen bonds from which a supramolecular architecture is created. UV–VIS spectrum gives W–O and U–O charge transfer transitions at 230–265 and 432 nm, showing the change of geometry of the polyanion and weakening of the U–O bonds of the uranyl cation. Electronic supplementary material The online version of this article () contains supplementary material, which is available to authorized users.     

Kinetic studies on the hydrogenation of nitrate in water using Rh/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and Rh-Cu/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

Liquid-phase reduction NO ₃ ⁻ using monometallic and bimetallic catalysts (5% Rh/Al₂O₃, 5% Rh-0.5% Cu/Al₂O₃, 5% Rh-1.5% Cu/Al₂O₃, 5% Rh-5% Cu/Al₂O₃ and a physical mixture of 5% Rh/Al₂O₃ and 1.5% Cu/Al₂O₃) was studied in a slurry reactor operating at atmospheric pressure. Kinetic measurements were performed for a low concentration of nitrate (0.4 × 10⁻³−3.2 × 10⁻³ mol dm⁻³) and the temperature range 293–313 K. From the experimental data, it was found that the reduction of nitrate is first order with respect to nitrate. On the basis of the rate constants, the apparent activation energy was established using a graphic method. Published in Russian in Kinetika i Kataliz, 2007, Vol. 48, No. 6, pp. 881–886. This article was submitted by the authors in English.     

Electrical conductivity studies in the system Li<Subscript>2</Subscript>TiO<Subscript>3</Subscript>-Li<Subscript>1.33</Subscript>Ti<Subscript>1.67</Subscript>O<Subscript>4</Subscript>

Electrical conductivity in the monoclinic Li₂TiO₃, cubic Li_1.33Ti_1.67O₄, and in their mixture has been studied by impedance spectroscopy in the temperature range 20–730 °C. Li₂TiO₃ shows low lithium ion conductivity, σ₃₀₀≈10^–6 S/cm at 300 °C, whereas Li_1.33Ti_1.67O₄ has 3×10^–8 at 20 °C and 3×10^–4 S/cm at 300 °C. Structural properties are used to discuss the observed conductivity features. The conductivity dependences on temperature in the coordinates of 1000/T versus log_e(σT) are not linear, as the conductivity mechanism changes. Extrinsic and intrinsic conductivity regions are observed. The change in the conductivity mechanism in Li₂TiO₃ at around 500–600 °C is observed and considered as an effect of the first-order phase transition, not reported before. Formation of solid solutions of Li_{2– x} Ti_{1+ x} O₃ above 900 °C significantly increases the conductivity. Irradiation by high-energy (5 MeV) electrons causes defects and the conductivity in Li₂TiO₃ increases exponentially. A dose of 144 MGy yields an increase in conductivity of about 100 times at room temperature. Electronic Publication     

Determination of the enthalpy of fusion of K<Subscript>3</Subscript>NbO<Subscript>2</Subscript>F<Subscript>4</Subscript>

Areas of fusion and crystallization peaks of K₃NbO₂F₄ were measured using the DCS mode of a high-temperature calorimeter (SETARAM 1800 K). On the basis of these quantities, considering the temperature dependence of the calorimeter sensitivity, the value of the fusion enthalpy of K₃NbO₂F₄ of (98 ± 6) kJ mol⁻¹ was determined at the fusion temperature of 1257 K.     

Local structure and photoluminescent characteristics of Eu<Superscript>3+</Superscript> in ZnO–SiO<Subscript>2</Subscript> glasses

The photoluminescence properties of xZnO–(100−x)SiO₂ (x = 0, 5, 10, 20) containing 1% Eu₂O₃ prepared by a sol–gel method were systematically investigated. The results indicated that the relative proportion of f–f transitions to charge transfer (CT) absorption decreased with the increase of ZnO concentration. The intensity of ⁵D₀–⁷F_J transitions of Eu³⁺ ions was enhanced with the increase of ZnO content due to local structure changes and decreased quantities of Eu³⁺ ions clusters. The results of fluorescence line narrow (FLN) spectra indicated that Eu³⁺ ions occupied one site in SiO₂ glass and two sites in ZnO–SiO₂ glasses. The second-order crystal field parameters were calculated. B₂₀ and B₂₂ for site 1 increased with excitation energy, while ones hardly changed for site 2.     

Synthesis of ammonia from natural gas at atmospheric pressure with doped ceria–Ca<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>–K<Subscript>3</Subscript>PO<Subscript>4</Subscript> composite electrolyte and its proton conductivity at intermediate temperature

A new type of oxide–salt composite electrolyte, yttrium doped ceria YDC–Ca₃(PO₄)₂–K₃PO₄, was developed and demonstrated for its promising use for ammonia synthesis. Using this composite electrolyte, ammonia was synthesized from nitrogen and natural gas at atmospheric pressure in the solid-state proton conducting cell reactor, and the optimal condition for ammonia production was determined . The evolved rate of ammonia is up to 6.95×10⁻⁹ mol s⁻¹ cm⁻².     

Solid electrolytes based on CeO<Subscript>2</Subscript> for medium-temperature electrochemical devices

CeO₂-based solid solutions with a fluorite structure are promising materials as electrolytes of medium-temperature electrochemical devices: electrolytic cells, oxygen sensors, and solid oxide fuel cells. In this work, studies are presented of the effect of the dopant cation radius and its concentration on the physico-chemical properties of the Ce_{1 − x} Ln _x O_{2 − δ} solid solutions (x = 0–0.20; Ln = La, Nd, Sm, Eu, Gd, Dy, Ho, Er, Yb) and also of multicomponent solid solutions of Ce_{1 − x} Ln _x/2Ln′ _x/2O_{2 − δ} (x = 0–0.20; Ln = Sm, La, Gd and Ln′ = Dy, Nd, Y) and Ce_{1 − x − y} Sm _x M _y O_{2 − δ} (M = Ca, Sr, Ba) obtained using the solid-phase synthesis technique. Electric properties of the samples were studied in the temperature range of 623–1173 K and in the oxygen partial pressure range of 0.01–10⁻²² MPa. The values of oxygen critical pressure ( p_O2 ^* )\left( {p_{O_2 }^* } \right) are presented, at which the ionic and electron conductivity values are equal. The values were calculated on the basis of experimental dependences at 1023 K at the assumption that the ionic conductivity value is determined only by the dopant concentration and its effective ionic radius and is independent of the oxygen partial pressure.     

Synthesis,structure, and electric properties of oxygen-deficient perovskites Ba<Subscript>3</Subscript>In<Subscript>2</Subscript>ZrO<Subscript>8</Subscript> and Ba<Subscript>4</Subscript>In<Subscript>2</Subscript>Zr<Subscript>2</Subscript>O<Subscript>11</Subscript>

Perovskite phases Ba₃In₂ZrO₈ and Ba₄In₂Zr₂O₁₁ with the nominal concentration of structural oxygen vacancies 1/9 and 1/12, respectively, were synthesized by solid-phase and solution methods. X-ray diffraction showed cubic symmetry of both phases with the unit cell parameter a = 0.4193(2) and 0.4204(3) nm, respectively. The absence of superstructural lines resulted in the conclusion on statistical arrangement of oxygen vacancies. Thermogravimetry and mass spectrometry proved that both phases can reversibly absorb water from gas phase (pH₂O = 2 × 10⁻² atm) with observed correlation between the concentration of oxygen vacancies and amount of absorbed water. The total water amount was up to 0.9 mol per formula unit or, if recalculated for perovskite unit ABO₃, 0.3 and 0.23 mol H₂O, respectively. The temperature curves of coductivity in the atmosphere with various partial water vapor pressures (pH₂O = 3 × 10⁻⁵ and 2 × 10⁻² atm) showed significantly higher conductivity and lower activation energy (0.52 eV) in humid atmosphere due to proton transfer. The proton conductivity is up to 5 × 10⁻⁴ Ohm⁻¹ cm⁻¹ at 300°C for Ba₃In₂ZrO₈ specimen. IR spectrometry showed that protons in the structure exist primarily in OH-groups.     

Determination of europium by using the chemical oscillating system of Ce(IV)-KBrO<Subscript>3</Subscript>-acetone-oxalic acid-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>

A sensitive and convenient method for the determination of trace europium ions using an oscillating chemical reaction involving Ce(IV) - KBrO₃ - acetone - oxalic acid - H₂SO₄ was proposed. The results indicated that the changes in oscillating period (T) was linearly proportional to the negative logarithmic concentration of Eu³⁺ (-log C) in the range of 1.41 × 10⁻⁸ ˜ 1.41 × 10⁻⁴ mol L⁻¹ (r = 0.9982) with a detection limit of 1.04 × 10⁻⁹ mol L⁻¹. The recoveries were limited to the range of 99.5% to 100.8%. Under the same conditions, other rare earth ions did not interfere with the determination of Eu³⁺. In addition, a perturbation mechanism was also discussed briefly.      

Solid electrolytes with cesium-cationic conduction in the Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-TiO<Subscript>2</Subscript>-Cs<Subscript>2</Subscript>O system

New cesium-conducting solid electrolytes based on cesium monoferrite in the Fe₂O₃-TiO₂-Cs₂O system are synthesized and studied. It is found that the introduction of titanium dioxide significantly reduces the electronic component of conductivity, which prevails in pure CsFeO₂, and raises the ionic conductivity. The latter becomes predominant with increasing concentration of TiO₂. The effect of dimensional factor on the characteristics of electrolyte is shown. The optimal compositions studied have very high cesium-cationic conductivity: it is above 10⁻² S cm ⁻¹ at 300°C.     

Measurement of the rate constants of the reactions of the chlorine atom with C<Subscript>3</Subscript>F<Subscript>7</Subscript>I and CF<Subscript>3</Subscript>I using the resonance fluorescence of chlorine atoms

The rate constants of the reactions of the chlorine atom with C₃F₇I (k ₁) and CF₃I (k ₂) have been measured using the resonance fluorescence of chlorine atoms in a flow reactor at 295 K: k ₁ = (5.2 ± 0.3) × 10⁻¹² cm³ molecule⁻¹ s⁻¹ and k ₂ = (7.4 ± 0.6) × 10⁻¹³ cm³ molecule⁻¹ s⁻¹. No iodine atoms have been detected in the reaction products.     

Gas phase structure of micro-hydrated [Mn(ClO<Subscript>4</Subscript>)]<Superscript>+</Superscript> and [Mn<Subscript>2</Subscript>(ClO<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>+</Superscript> ions probed by infrared spectroscopy

Gas-phase infrared photodissociation spectroscopy is reported for the microsolvated [Mn(ClO₄)(H₂O) _n ]⁺ and [Mn₂(ClO₄)₃(H₂O) _n ]⁺ complexes from n = 2 to 5. Electrosprayed ions are isolated in an ion-trap where they are photodissociated. The 2600–3800 cm⁻¹ spectral region associated with the OH stretching mode is scanned with a relatively low-power infrared table-top laser, which is used in combination with a CO₂ laser to enhance the photofragmentation yield of these strongly bound ions. Hydrogen bonding is evidenced by a relatively broad band red-shifted from the free OH region. Band assignment based on quantum chemical calculations suggest that there is formation of water—perchlorate hydrogen bond within the first coordination shell of high-spin Mn(II). Although the observed spectral features are also compatible with the formation of structures with double-acceptor water in the second shell, these structures are found relatively high in energy compared with structures with all water directly bound to manganese. Using the highly intense IR beam of the free electron laser CLIO in the 800–1700 cm⁻¹, we were also able to characterize the coordination mode (η²) of perchlorate for two clusters. The comparison of experimental and calculated spectra suggests that the perchlorate Cl—O stretches are unexpectedly underestimated at the B3LYP level, while they are correctly described at the MP2 level allowing for spectral assignment.     

Two color up-conversion emissions of Er<Superscript>3+</Superscript>-doped Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanopowders prepared by non-aqueous sol-gel method

Er³⁺-doped Al₂O₃ nanopowders have been prepared by the non-aqueous sol-gel method using the aluminum isopropoxide as precursor, acetylacetone as a chelating agent, nitric acid as a catalyzer, and hydrated erbium nitrate as a dopant under isopropanol environment. The different phase structure, including three crystalline types of (Al, Er)₂O₃ phases, α, γ, θ, and an Er–Al–O stoichiometric compound phase, Al₁₀Er₆O₂₄, was observed for the 0.01–0.5 mol% Er³⁺-doped Al₂O₃ nanopowders at the sintering temperature of 1,000 °C. The green and red up-conversion emissions centered at about 523, 545 and 660 nm, corresponding respectively to the ²H_11/2, ⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 transitions of Er³⁺, were detected by a 978 nm semiconductor laser diodes excitation. With increasing Er³⁺ doping concentration from 0.01 to 0.1 mol%, the intensity of the green and red emissions increased with a decrease of the intensity ratio of the green to red emission. When the Er³⁺ doping concentration rose to 5 mol%, the intensity of the green and red emissions decreased with an increase of their intensity ratio. The maximum intensity of both the green and red emissions with the minimum of intensity ratio was obtained, respectively, for the 0.1 mol% Er³⁺-doped Al₂O₃ nanopowders composed of a single α-(Al,Er)₂O₃ phase. The intensity ratio of the green emission at 523 and 545 nm increased monotonously for all Er³⁺ doping concentrations. The two-photon absorption up-conversion process was involved in the green and red up-conversion emissions of the Er³⁺-doped Al₂O₃ nanopowders.