Molecular structure of <Emphasis Type="Italic">N</Emphasis>-(<Emphasis Type="Italic">o</Emphasis>-and <Emphasis Type="Italic">p</Emphasis>-hydroxybenzyl)cytisine

The molecular structures of N-(o-and p-hydroxybenzyl)cytisine were investigated by NMR spectroscopy, x-ray structure analysis, and molecular modeling. It was found that NMR resonances of the OH and aromatic protons in N-(o-hydroxybenzyl)cytisine were doubled because of the presence of two conformers in solution. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 165–168, March–April, 2008.     

Mono-<Emphasis Type="Italic">meso</Emphasis>-<Emphasis Type="Italic">tert</Emphasis>-butylporphyrin

Summary. Treatment of meso-tetra(tert-butyl)porphyrin with sulfuric acid/n-butanol affords a mixture of porphyrin and mono-tert-butylporphyrin in relatively high yield.     

Conducting materials prepared by the oxidation of <Emphasis Type="Italic">p</Emphasis>-phenylenediamine with <Emphasis Type="Italic">p</Emphasis>-benzoquinone

p-Phenylenediamine was oxidized with p-benzoquinone in the aqueous solutions of methanesulfonic acid (MSA). The conductivity of the products increased with increasing concentration of MSA from 1.5?×?10^?12 S cm^?1 in 0.1 M MSA up to 3.4?×?10^?4 S cm^?1 in 5 M MSA. The low-molecular-weight products are basically composed of one p-benzoquinone and two p-phenylenediamine molecules. Their molecular structure is discussed on the basis of mass, Fourier-transform infrared, Raman, NMR and electron paramagnetic resonance (EPR) spectroscopies. The formation of 2,5-di(p-phenylenediamine)-p-benzoquinone protonated with methanesulfonic acid best complies with the information provided by spectroscopic techniques. Its conversion to hydroquinone tautomer explains the formation of unpaired spins observed by EPR and their potential contribution to the conduction.     

Convenient synthesis and NMR spectral studies of variously substituted <Emphasis Type="Italic">N</Emphasis>-methylpiperidin-4-one-<Emphasis Type="Italic">O</Emphasis>-benzyloximes

Abstract  A series of variously substituted N-methylpiperidin-4-one-O-benzyloximes were synthesized by three different methods. Among them, the direct conversion of 2,6-diarylpiperidin-4-ones into the corresponding oxime ethers (method A) was proved to be better than the other two methods in the sense of good yield, convenience, easy work-up and quick reaction time. All the synthesized compounds are characterized by IR, Mass and NMR (¹H NMR, ¹³C NMR, ¹H-¹H COSY, ¹H-¹³C COSY and HMBC) spectral studies. The conformational preference of the synthesized oxime ethers with/without alkyl and aryl substituents at C-3/C-5 and C-2/C-6 is discussed using the spectral data. The observed chemical shifts and coupling constants suggest that the synthesized oxime ethers adopt chair conformation with equatorial orientation of all the substituents, whereas 1-methyl-3-isopropyl-2,6-diphenylpiperidin-4-one-O-benzyloxime also exists in boat conformation. Based on the NMR data, the effects of oximination on ring carbons and their associated protons and alkyl substituents are discussed. In addition, the effect of NMe group on the 2,6-diarylpiperidin-4-one-O-benzyloximes was also studied. Graphical abstract        

4<Emphasis Type="Italic">p</Emphasis><Superscript>2</Superscript> resonances in photoionization from 4<Emphasis Type="Italic">s</Emphasis>4<Emphasis Type="Italic">p</Emphasis> levels in neutral zinc

In neutral zinc the 4p ² configuration lies above the 3d ¹⁰4s ionization limit and its levels become perturbers in the continuum. Lines have been identified in the Zn I spectrum for the multiplet, whereas no lines have been found for transitions to 4p ^{2 1} D or ¹ S. In this paper, cross sections for photoionization from 4s4p levels are reported that reveal the positions and widths of the 4p ² resonances. Calculations were performed using the multiconfiguration Hartree-Fock (MCHF) and B-spline R-matrix (BSR) method. Results from Breit–Pauli calculations that ignore the background continua are also presented. Included in the latter are energies for the levels and transition data (transition energies, line strengths, f-values, and A-rates) for all E1 transitions between these levels. Transition energies and the agreement in the length and velocity values, particularly for allowed transitions, indicate the accuracy of the computational model. Line widths are compared with other estimates. Contribution to the Serafin Fraga Memorial Issue.     

Pathways of decomposition of <Emphasis Type="Italic">N</Emphasis>-cyclopropyl <Emphasis Type="Italic">N</Emphasis> nitrosoureas in methanol

Decomposition of a series of N-cyclopropyl-N-nitrosoureas (CNU) in CD₃OD was studied. These decompose much more rapidly than N-methyl-N-nitrosourea, one of the decomposition pathways being denitrosation, which is atypical of alkylnitrosoureas under the reaction conditions used. The nature of substituents in the cyclopropane ring has a great effect on the stability of CNU and the product ratio. In the presence of H₂ SO₄, decomposition occurs much more rapidly. Possible pathways of the formation of the major decomposition products of CNU are proposed based on the experimental data.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 359–370, February, 2005.     

Horseradish peroxidase-catalyzed polymerization of<Emphasis Type="Italic"> p</Emphasis>-hydroxycinnamic acid for synthesis of reactive microspheres

In this article, we report the experimental synthesis of reactive polymer microspheres of poly(p-hydroxycinnamic acid). Enzyme-catalyzed polymerization of poly(p-hydroxycinnamic acid) using horseradish peroxidase as a catalyst and hydrogen peroxide as an oxidant took place in a mixture solution of methanol and phosphate buffer solution; it was found that the fraction of methanol in the mixture solution strongly affected the yield of powdery polymer materials. The chemical structure of the polymers was characterized by ¹H-NMR and FT-IR spectroscopies, and the molecular weight was measured by gel permeation chromatography. The ¹H-NMR chart of the obtained polymer was almost the same as that of the monomer; FT-IR spectra indicated the existence of carboxyl groups. The weight-average molecular weight of the soluble part in tetrahydrofuran was found to be 1,451. Dispersion polymerization of p-hydroxycinnamic acid was carried out in a mixture solution of methanol and phosphate buffer solution by adding a dispersion stabilizer. Of the several such polymers tested, poly(vinyl alcohol) was found to be the most effective in producing reactive poly(p-hydroxycinnamic acid) microspheres.     

Inducing Geometrical Changes of Biliverdin Chromophores by 23<Emphasis Type="Italic">N</Emphasis>-Methylation

Summary. Transfer of sterical hindrance from the periphery to the center of biliverdins by placing a methyl group at N23 and hydrogens at the -carbons in position 12 and 13 changes the conformation of the chromophore from (10syn,14syn) to (10anti,14anti). Additional reduction of sterical hindrance by placing a further hydrogen at the -carbon in position 8 induces a change in configuration from (9Z) to (9E).     

Cycloascauloside b from <Emphasis Type="Italic">Astragalus caucasicus</Emphasis>

The structure of a new cycloartane glycoside isolated from leaves of Astragalus caucasicus Pall. (Leguminosae) was elucidated using chemical transformations and spectral data. Cycloascauloside B is 20R, 25-epoxy-24S-cycloartan-3β,6α,16β,24-tetraol 3-O-[α-L-rhamnopyranosyl-(1å2)]-β-D-glucopyranoside.     

<Emphasis Type="Italic">p</Emphasis>-<Emphasis Type="Italic">tert</Emphasis>-Butylcalix[8]arene loaded silica gel for preconcentration of uranium(VI) via solid phase extraction

This paper reports silica gel loaded with p-tert-butylcalix[8]arene as a new solid phase extractor for determination of trace level of uranium. Effective extraction conditions were optimized in column methods prior to determination by spectrophotometry using arsenazo(III). The results showed that U(VI) ions can be sorbed at pH 6 in a mini-column and quantitative recovery of U(VI) (>95–98%) was achieved by stripping 0.4 mol L⁻¹ HCl. The sorption capacity of the functionalized sorbent is 0.072 mmol uranium(VI) g⁻¹ modified silica gel. The relative standard deviation and detection limit were 1.2% (n = 10) for 1 μg uranium(VI) mL⁻¹ solution and 0.038 μg L⁻¹, respectively. The method was employed to the preconcentration of U(VI) ions from spiked ground water samples.     

Arabinogalactomannan from <Emphasis Type="Italic">Gleditsia macracantha</Emphasis> seeds

A polysaccharide with MW 25,000 consisting of arabinose, galactose, and mannose units in a 1:2.8:3.2 ratio was isolated from Gleditsia macracantha seeds. Chemical and spectral methods established that the polysaccharide was a branched galactomannan with side branches consisting of arabinose units. Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 128-130, March-April, 2009.     

Production of lipase by a newly isolated <Emphasis Type="Italic">Bacillus coagulans</Emphasis> under solid-state fermentation using melon wastes

Summary An extracellular lipase was produced by Bacillus coagulans by solid-state fermentation. Solid waste from melon was used as the basic nutrient source and was supplemented with olive oil. The highest lipase production (78,069 U/g) was achieved after 24h of cultivation with 1% olive oil enrichment. Enzyme had an optimal activity at 37°C and pH 7.0, and sodium dodecyl sulfate increased lipase activity. NH ₄NO₃ increased enzyme production, whereas organic nitrogen had no effect. The effect of the type of carbon sources on lipolytic enzyme production was also studied. The best results were obtained with starch and maltose (148,932 and 141,629 U/g, respectively), whereas a rather low enzyme activity was found in cultures grown on glucose and galactose (approx 118,769 and 123,622 U/g, respectively). Enzyme was inhibited with Mn⁺² and Ni⁺² by 68 and 74%, respectively. By contrast, Ca⁺² enhanced enzyme production by 5%.     

Synthesis of 6-methyl-8<Emphasis Type="Italic">H</Emphasis>-dibenzo[<Emphasis Type="Italic">a</Emphasis>,<Emphasis Type="Italic">g</Emphasis>]quinolizin-8-imines <Emphasis Type="Italic">via Reissert</Emphasis> compounds

Alkylation of Reissert compounds derived from 3-methylisoquinolines with several 2-cyanobenzylbromides followed by hydrolytic cleavage provided the corresponding 1-benzyl-3-methylisoquinolines. Treatment of the latter with methylmagnesiumiodide caused cyclization to the title compounds rather than formation of 2-acetylbenzylisoquinolines.     

DFT-calculated structure of protonated tetraphenyl <Emphasis Type="Italic">p</Emphasis>-<Emphasis Type="Italic">tert</Emphasis>-butylcalix[4]arene tetraketone

Using DFT calculations, two of the most probable structures (A, B) of the tetraphenyl p-tert-butylcalix[4]arene tetraketone·H₃O⁺ cationic complex species were derived. The hydroxonium ion H₃O⁺, placed in the coordination cavity formed by the calix[4]arene lower-rim groups, is bound by strong hydrogen bonds to the phenoxy oxygen atoms of the calix[4]arene ligand (structures A, B) and also to one carbonyl oxygen (structure B). Correspondence: Emanuel Makrlík, Faculty of Applied Sciences, University of West Bohemia, Pilsen, Czech Republic.     

Synthesis and NMR spectroscopy investigations of functionalized 8,8,10-trimethyl-4-phenyl-7,8-dihydro-2<Emphasis Type="Italic">H</Emphasis>,6<Emphasis Type="Italic">H</Emphasis>-pyrano[3,2-<Emphasis Type="Italic">g</Emphasis>]chromene-2,6-diones and their spirothiadiazole derivatives

New functionalized derivatives of 8,8,10-trimethyl-4-phenyl-7,8-dihydro-2H,6H-pyrano[3,2-g]-chromene-2,6-dione – analogues of the natural compound graveolone – possessing hydrazine, hydroxylamine, and thiosemicarbazide residues were synthesized and their reactions with acetic anhydride were studied. The structure of the obtained compounds was confirmed by NMR spectroscopy. Correspondence: Viktoria Moskvina, Chemistry Department, Kyiv National Taras Shevchenko University, 60, ul. Vladimirskaya, 01033 Kyiv, Ukraine.     

The Unusual Transformation of an Aromatic 1<Emphasis Type="Italic">H</Emphasis>-Imidazole into a Non-Aromatic 2<Emphasis Type="Italic">H</Emphasis>-Imidazole

2H-Imidazole derivative 5 has been synthesized and characterized by the X-ray diffraction (XRD) method. The compound crystallizes in the monoclinic space group Cc with cell parameters a = 19.398(1), b = 8.890(1), c = 10.247(1), β = 110.76(1), Z = 4. The molecules are inter-linked through C–H⋅sO and C–H⋅sπ interactions forming infinite chains.     

5<Emphasis Type="Italic">p</Emphasis>-4<Emphasis Type="Italic">d</Emphasis> Emission spectrum with a cascade decay of the 3<Emphasis Type="Italic">d</Emphasis> vacancy in the Xe atom

The 5p-4d emission spectrum, obtained during cascade de-excitation of the initial deep 3d vacancy in the Xe atom, was calculated by directly constructing a decay tree in a stepwise manner. The cascade decay tree was constructed with allowance for all radiative and nonradiative channels of decay for the initial and all intermediate ionic configurations of the cascade. The probabilities of branching and transition energies were calculated in a one-electron approximation with averaging over configurations. The 5p-4d cascade emission spectrum has a complex structure with many components, which reflects the transitions from the wide variety of the many-hole intermediate configurations generated by the cascade. The calculated data agree well with the experiment.     

Adsorption of<Emphasis Type="Italic"> N</Emphasis>-dodecyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethyl-3-ammonio-1-propanesulfonate (DDAPS), a model zwitterionic surfactant,on the Au(111) electrode surface

Electrochemical measurements including cyclic voltammetry, differential capacity, and chronocoulometry have been used to characterize the adsorption behaviors of the zwitterionic surfactant N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (DDAPS) on the Au(111) electrode surface. The thermodynamics of the ideally polarized electrode have been employed to determine the Gibbs excess and the Gibbs energy of adsorption. The results show that the adsorption of DDAPS has a multistate character. The first two states are observed at potentials close to zero charge. At low bulk DDAPS concentrations, it corresponds to the formation of a film of nearly flat adsorbed molecules. At higher concentrations it is converted into a hemimicellar state. The second state is formed at negative potentials and charge densities close to 0 C cm^–2. It corresponds to a film of tilted molecules oriented with the hydrocarbon tail towards the metal and the polar head toward the solution.Dedicated to Professor Zbigniew Galus on the occasion of his 70^th birthday and in recognition of his many contributions to electrochemistry.     

Mass spectrometric studies of the gas phase retro-<Emphasis Type="Italic">Michael</Emphasis> type fragmentation reactions of 2-hydroxybenzyl-<Emphasis Type="Italic">N</Emphasis>-pyrimidinylamine derivatives

The gas-phase fragmentation reactions of 2-hydroxybenzyl-N-pyrimidinylamine derivatives (Compounds 1 to 6), the O-N-type acid-catalyzed Smiles rearrangement products of 2-pyrimidinyloxy-N-arylbenzylamine derivatives, have been examined via positive ion matrix-assisted laser desorption/ionization (MALDI) infrared multiphoton dissociation (IRMPD) mass spectrometry in FT-ICR MS and via negative ion electrospray ionization (ESI) in-source collision-induced dissociation (CID) mass spectrometry, respectively. The major fragmentation pathway of protonated 1 to 6 gives the F ions under IRMPD; theoretical results show that the retro-Michael reaction channel is more favorable in both thermodynamics and kinetics. This explanation is supported by H/D exchange experiments and the MS/MS experiment of acetylated 1. Deprotonated 1 to 6 give rise to the solitary E ions (aromatic nitrogen anions) in the negative ion in-source CID; theoretical calculations show that a retro-Michael mechanism is more reasonable than a gas-phase intramolecular nucleophilic displacement (SN2) mechanism to explain this reaction process.     

Novel terpolymers of poly(<Emphasis Type="Italic">p</Emphasis>-dioxanone-<Emphasis Type="Italic">co</Emphasis>-trimethylene carbonate-<Emphasis Type="Italic">co</Emphasis>-L-phenylalanine): Synthesis,characterization, thermal properties and copolymerization mechanism

In order to exploit the biological functions of materials, a series of new random terpolymers were synthesized by the ring-opening polymerization of p-dioxanone, trimethylene carbonate, and L-phenylalanine N-carboxyanhydride (L-Phe- NCA) in the presence of stannous octoate. The terpolymers were characterized by ¹H-NMR, ¹³C-NMR, FTIR, and gel permeation chromatography. The effects of the reactant ratio, catalyst dosage, reaction temperature and time on the copolymerization were investigated, and were found to regulate the composition of the terpolymer. Increases in the reaction temperature, polymerization time, L-Phe-NCA monomer amount, and catalyst content generated a product with a slightly decreased molecular weight. The crystallinity of the terpolymer was investigated by differential scanning calorimetry and polarized optical microscopy. A reasonable mechanism for the polymerization was proposed based on the obtained results.