Individual sample conditioning in flow analysis. Determination of N-total in plant materials

A flow-batch system allowing in-line individual sample matrix matching is proposed for analysis of sample lots with high variability in acidity. The feasibility of the approach is demonstrated in the spectrophotometric determination of total nitrogen in Kjeldahl digests, using a column with a slightly soluble reagent (AgCl). The solutions are sequentially injected by means of an 8-port selecting valve and processed in a mixing chamber that is also used as a monitoring unit. The system yields reproducible results (r.s.d. usually < 2.5%) and the sampling rate is 14 samples/h. The analytical curve is linear within 1.00 and 6.00% N (dry basis), and the regression coefficient is > 0.999 (n = 6). Results are in agreement with certified values of standard reference materials and with results obtained by conductometry. Received: 5 April 2000 / Revised: 6 June 2000 / Accepted: 13 June 2000     

Bead-injection determination of total mercury in river water samples.

A bead-injection system is proposed for total mercury determination in river-water samples. The procedure is based on the introduction of a defined quantity of a resin suspension in the flow system. The selected beads are packed inside of a flow cell and the formed resin mini-column constitutes the optical path. The sample volume is then selected, and its passage by the mini-column allows retention of the mercury ions on the surfaces of the beads. The introduction of a spectrophotometric reagent in the flow system leads to the formation of a colored Hg-dithizone complex on the surface of the bead, which is spectrophotometricaly monitored. The spent beads are directed to waste, allowing the system to become ready to process another sample. The proposed system handles about 20 measurements per hour, consuming 1000 microl of the sample, 1 mg of Chelex 100 resin and 1.25 microg of Dithizone per determination. When 1000 microl of the sample is injected, a linear analytical curve is obtained (A = 0.0052[Hg] + 0.1028, from 0 up to 30 microg l(-1), R2 = 0.995); the detection limit is estimated to be 0.9 microg l(-1). The results are precise, r.s.d. < 9%; spiked sample recoveries within 91.2 and 109% are found.     

A simple procedure for hydrodynamic injection in flow injection analysis applied to the atomic absorption spectrometry of chromium in steels

The proposed technique for hydrodynamic injection is based on commutation in a simple flow-injection system with only one peristaltic pump. Precise results (usually r.s.d. < 1%) are attained even when injected volumes are small (1–10 μl). Dead-volume effects are associated with the mechanical flexibility of the system and with diffusion; differences between effective sample size and the dimensions of the injection duct are emphasized, particularly for small volumes. The proposed technique is checked for a spectrophotometric model system and confirmed by the atomic absorption spectrometry of chromium in steels. With a sampling rate of 120 h^?1, the precision is better than 99% for chromium contents in the 0.0–30.0% (w/w) range. The results agree well with those obtained by i.c.p./a/e/s. and conventional a.a.s.     

On-line determination of manganese in solid seafood samples by flame atomic absorption spectrometry

Manganese is extracted on-line from solid seafood samples by a simple continuous ultrasound-assisted extraction system (CUES). This system is connected to an on-line manifold, which permits the flow-injection flame atomic absorption spectrometric determination of manganese. Optimisation of the continuous leaching procedure is performed by an experimental design. The proposed method allows the determination of manganese with a relative standard deviation of 0.9% for a sample containing 23.4 μg g⁻¹ manganese (dry mass). The detection limit is 0.4 μg g⁻¹ (dry mass) for 30 mg of sample and the sample throughput is ca. 60 samples per hour. Accurate results are obtained by measuring TORT-1 certified reference material. The procedure is finally applied to mussel, tuna, sardine and clams samples.     

Automatic determination of insolubles in lubricating oils by flow injection analysis employing an LED-photometer detector

A flow injection system is presented for the determination of the insolubles content in used lubricating oil samples. The system is based on the injection of an aliquot of the sample in a stream of organic solvent where it is dispersed, and measurement of the scattered radiation (measured as apparent absorbance) in the visible range (λ = 640 nm). An LED-based photometer was used for this purpose. The whole system including sample injection and data acquisition was controlled by a personal computer. Calibration curves exhibited good linearity (h = 0.415 ± 0.016C + 0.00 ± 0.03, r² = 0.9995, confidence level of 95%) in the range up to 2.68% (insolubles in pentane). Detection and quantification limits were respectively 0.07% and 0.16% (w/w). The method was validated by analysis of 25 real samples by the proposed method and the FTIR method finding high correlation. Waste generation and reactive consumption is much less than in the official method (ASTM D-893). The proposed method employs 25 mL of kerosene per sample while the official method employs 200 mL of pentane.     

An improved monosegmented continuous-flow system for sample introduction in flame atomic spectrometry

A monosegmented system for sample introduction which does not require air removal is proposed. The sample is intercalated into an unsegmented carrier stream together with air plugs. Segmentation involving the placement of a single air plug in the tailed portion of the sample is also investigated and compared with the original approach in which the sample is introduced between two air bubbles. Effects of sample volume (25–1000 μl) and length of the air plugs (5–200 cm) on the recorded peak and measurement reproducibility are discussed. Flame instability caused by the air plugs is not a problem with the larger samples. The single-line system proposed for determination of zinc in plant digests is very stable. Limited dispersion is achieved by injecting only about 100 μl of sample; a sampling rate of 400 measurements per hour at the 1% carryover level can be attained. Precise results (r.s.d. ca. 1%) in agreement with those obtained by conventional atomic absorption spectrometry (a.a.s.) are achieved. The advantages of the proposed system compared to a conventional flow-injection system for a.a.s. are emphasized. The determination of calcium in natural waters demonstrates the feasibility of monosegmentation when a reagent solution must be added. Lanthanum solution can be added by merging zones or by confluence, either before or after the sample injection. The accuracy, precision, sample consumption and system stability attained are favourable.     

Determination of urea in serum by using naturally immobilized urease in a flow injection conductimetric system

A flow injection method was developed, aimed at the determination of urea in human serum. The system makes use of the naturally immobilized urease present in Canavalia ensiformis DC (jack bean). A column is filled with small pieces of this bean, and the sample (50 microliters) containing urea passes through it carried by a 1% NaCl solution. On leaving the column the stream is merged with an alkaline reagent (0.5 mol dm-3 NaOH; 0.5% disodium dihydrogen ethylenediaminetetraacetate). The ammonium ions, arising from the enzymatic reaction that occurs inside the column, are changed into the molecular form, which permeates a polytetrafluoroethylene membrane and is received in a de-ionized water acceptor stream. The ammonia ionizes causing an increase in the conductance, which is proportional to the urea content of the sample. About 40 samples can be processed in 1 h with negligible carry-over and with a relative standard deviation of 1% or less. The results are in agreement with those obtained by a standard spectrophotometric method.     

Determination of the total acidity in soft drinks using potentiometric sequential injection titration

A potentiometric SI titration system for the determination of total acidity in soft drinks is proposed. The concept is based on the aspiration of the acid soft drink sample between two base zones into a holding coil with the volume of the first base zone twice to that of the second one and channelled by flow reversal through a reaction coil to a potentiometric sensor. A solution of 0.1 mol l⁻¹ sodium chloride is used as ionic strength adjustment buffer in the carrier stream. The system has been applied to the analysis of some South African soft drinks having a total acidity level of about 0.2–0.3% (w/v). The method has a sample frequency of 45 samples per h with a linear range of 0.1 and 0.6% (w/v). It is easy to use, fully computerised, and gives the results that are comparable to both automated batch titration and manual titration.     

Comprehensive two-dimensional liquid chromatography in the analysis of antioxidant phenolic compounds in wines and juices

A novel comprehensive two-dimensional liquid chromatographic (LC×LC) system was developed for the quantification of antioxidant phenolic compounds in wine and juice. The system allows parts of the sample that are well separated in the first column to pass directly to the detector after the first column, while the rest of the sample proceeds to the second column. The optimised LC×LC system employed a combination of two C18 columns, the latter column with an ion-pair reagent (tetrapentylammonium bromide). The relative standard deviations (RSD) for the retention times were better than 0.01% in the first dimension and on average 6.3% in the second. The RSD values of the peak volumes varied from 3% (protocatechuic acid) to 13% (caffeic acid, n = 3, 10 μg/ml).     

A novel strategy to verification of adulteration in alcoholic beverages based on Schlieren effect measurements and chemometric techniques

A novel strategy to evaluation of adulteration in alcoholic beverages based on the measurement of the Schlieren effect using an automated FIA system with photometric detection is proposed. The assay is based on the Schlieren effect produced when beverage samples are injected in a single-line FIA system that uses water as carrier stream and a light-emitting diode-phototransistor photometer controlled by microcomputer as detector. The flow system presents limited mixing conditions which make possible to create gradients of refractive index (Schlieren effect) in the injected sample zone. These gradients are reproducible, characteristic of each alcoholic beverage and undergo specific modifications when adulterations with water or ethanol are imposed. Schlieren effect data of brandies, cachaças, rums, whiskies and vodkas were treated by SIMCA to elaborate class models applied in the evaluation of alcoholic beverages adulteration. Samples of the original matrix of each sort of beverages were adulterated in laboratory by adding water, methanol and ethanol in levels of 5% and 10% (v/v). These samples were used as test set to validate SIMCA class models. The verification of authenticity using Schlieren effect measurements presented good results making possible to identify 100% of the beverages samples adulterated in laboratory and 93% of the actual adulterated alcoholic beverages with confidence levels of 95%. As principal advantage, the automated system does not use reagents to carry out the analysis.     

Ultrasonic nebulization extraction coupled with on-line gas chromatography for determination of trans-anethole in spices

Ultrasonic nebulization extraction (UNE) coupled with on-line gas chromatography (GC) was proposed for the determination of trans-anethole in fruits of Illicium verum Hook. f. and Foeniculum vulgare Mill. The extraction was performed in a common self-made extraction system. In the UNE the analyte was transferred and enriched from the solid sample to gas phase. The sample gas containing analyte obtained by UNE was introduced into the sampling loop with the purging gas (N₂). And then the sample gas in the sampling loop was introduced into the GC column. Several experimental parameters of on-line UNE-GC, including sampling time, flow rate of purging gas, standstill time and temperature of tubing, were optimized. The calibration curve ranging from 0.05 to 1.5 mg g⁻¹ for determining the trans-anethole was obtained. The recoveries for determining trans-anethole are between 99.2% and 111.2% and RSDs are less than 8.3% when the UNE was applied. The analytes can rapidly be extracted and transferred from the solid sample to gas phase. The analytes in the gas phase are easier to be introduced into GC system than those in the solid and liquid phase. Compared with off-line systems, the proposed on-line system is more suitable to detect volatile compounds.     

Flow injection titration basing on the merging-zone technique

The proposed approach relies on titration of a sample that is gradually diluted in strictly controlled way in the flow injection system developed. On each step of sample dilution equal volumes of the sample and titrant solutions are simultaneously injected into two carrier streams and the zones are merged with each other. Then, they are mixed completely in the mixing chamber, merged with a stream of indicator and directed to a detector. It has been revealed that the method provides the results with accuracy better than ±3.3% (RE) and with mean repeatability lower than 1.0% (RSD). When the analyte concentration in a sample is too low to be determined directly, the procedure of titration with standard addition is exploited. The proposed approach has been successfully applied to the determination of total acidity in vinegars and magnesium and calcium in pharmaceutical products. The results obtained were comparable with those provided by the reference methods. The proposed procedure is characterized by low consumption of sample (usually less than 2 mL), titrant (about 3 mL) and indicator (about 0.6 mL). Average time of a single analysis is similar to time of traditional batch analysis.     

Spectrophotometric flow-injection determination of sucrose and total reducing sugar in sugar-cane juice and molasses

A flow-injection system with two sample carrier streams, one of them for on-line sucrose inversion, is proposed for the determination of sucrose and total reducing sugar. The method is based on the unselective oxidation of sugars by alkaline hexacyanoferrate(III) at ca. 95°C; the resulting hexacyanoferrate(II) is measured spectrophotometrically after addition of 1,10-phenanthroline and iron(III) sulphate. Two signals are recorded per cycle, reflecting the reducing sugar content of the sample before and after sucrose inversion. A debubber chamber removes the gases produced inside the heated reactors. Boiling water under reflux is used for heating. The effects of experimental variables and possible interferents are reported. The proposed system permits the analysis of about 40 samples per hour (80 measurements). Precise results (r.s.d.<1%) in agreement with those obtained with classical methods are achieved. Simplifications of the system are discussed.     

Multisyringe flow injection system for total inorganic selenium determination by hydride generation-atomic fluorescence spectrometry

A new multisyringe flow injection system for total inorganic selenium determination by hydride generation-atomic fluorescence spectrometry (HGAFS) has been proposed. The flow methodology is based on the simultaneous injection of sample in the acid media (50% HCl), a reducing sodium tetrahydroborate solution (0.18%) and a solution of hydrochloric acid (50%) which are dispensed into a gas-liquid separation cell by using a multisyringe burette coupled with one multiport selection valve. The usage of the time-based injection increases the sample throughput and provides precise known volumes of sample. The hydride of selenium is delivered into the flame of an atomic fluorescence spectrometer by means of an argon flow. A hydrogen flow has been used to support the flame.The technique can be applied over a wide range of concentrations of selenium between 0.1 and 3.5 μg l⁻¹ with good repeatability (relative standard deviation (R.S.D.) values 4.6-7% for 1 μg l⁻¹ of Se). The detection limit of the developed technique (3σ_b/S) was 0.01 μg l⁻¹. A sample throughput was 28 samples per hour (84 injections). The multisyringe technique has been validated by means of reference solid (sea lettuce) and water (hard drinking water) materials with good agreement with certified values. The analytical features were compared with those obtained by using of the commercial flow injection analysis (FIA) system. The proposed method provides a higher sampling frequency and a significant reduction of reagent and sample consumption in front the flow injection application.     

Arsenic determination in marine sediment using ultrasound for sample preparation.

This work deals with As determination in marine sediment using ultrasound for sample preparation. It is shown that As can be quantitatively extracted from marine sediment using 20% (v/v) HCl and sonication. The slurry is centrifuged and the analyte is determined in the supernatant by hydride generation atomic absorption spectrometry (HG AAS). A flow injection (FI) system is employed for hydride generation, with 0.5% (m/v) NaBH(4) used as reducdant and a 20% (v/v) HCl used as sample carrier. The limit of quantification is 1.6 microg g(-1) of As, which is based on 800 microl of sample solution and 0.200 g of sample mass in a volume of 50 mL. Certified and non certified marine sediment samples were analyzed; the results were in accordance with the certified or reference values. Speciation analysis by HPLC-ICP-MS showed that As(V) is the only detectable As species present in the supernatant of the centrifuged sample.     

Robust flow-batch coulometric/biamperometric titration system: determination of bromine index and bromine number of petrochemicals

A flow–batch system was constructed and evaluated to perform coulometric titrations with biamperometric end point detection. The flow section of the system is employed for sampling by injecting a sample volume (50–300 μL) in a flow injection-like system. About 1.5 mL of a suitable carrier solution is delivered by a peristaltic pump in order to quantitatively transfer the sample to the system titration cell (2.0 mL total inner volume). The carrier contains the coulometric precursor for the titrant species. The cell contains two pairs of platinum electrodes used for coulometric generation of reagent and biamperometric detection and is actively stirred. The titrant species is generated and the titration is performed by the usual batch procedure with the excess of titrant being detected by biamperometry following the analysis of the titration curve. System operation is computer controlled and all operations are automated, including titration curve analysis and cell cleaning after the titration is ended. The system is characterized by its robustness because its operation does not depend on flow rates, and the work using coulometric methods which generate gases at the counter-electrode is not troublesome. The flow–batch system has been evaluated for determination of bromine index and bromine number (relative to the total reactive olefin content) in petrochemicals according to an ASTM procedure. Typical precision (R.S.D.) is between 0.5 and 6% for different petrochemicals whose bromine number/index vary from 1000 to 10 mg of bromine per 100 g of sample, respectively. Recoveries for standard additions are between 92 and 123% for 10 mg of Br₂ per 100 g increments and 98 to 101% for 100 mg per 100 g increments. Accuracy of the proposed system was evaluated against results obtained by the standard ASTM with no significant difference detected at 95% confidence level.     

Lead in micro-samples of whole blood by Rhenium-cup in-torch vaporization-inductively coupled plasma-atomic emission spectrometry (ITV-ICP-AES)

A method is described for screening of lead in diluted micro-samples of whole blood by a Re-cup, in-torch vaporization (ITV) sample introduction system for inductively coupled plasma-atomic emission spectrometry (ICP-AES). The method required minimum sample preparation. For example, blood was diluted with water and Triton X-100 in 0.5% HNO₃ and, 5 μL were deposited on the Re-cup of the ITV sample introduction system. Samples were dried and charred in-situ prior to vaporization. Levels 1, 2, 3 and 4 (Pb concentration: 4.04, 10.3, 20.59 and 39.36 μg/dL) of NIST Standard Reference Material 955b ‘lead in bovine blood’ were used to test accuracy and precision. Accuracy was acceptable and precision was below 10% for levels 2–4 and 15% for level 1.     

Rapid and Simple Technique for the Quantitation of Polyamines in Biological Samples

Abstract

A rapid and simple technique has been developed to quantify putrescine, spermidine, and spermine in biological tissue. The method, based upon several published procedures, involves protein precipitation with perchloric acid followed by dansylation with 5-dimethylamino-1-naphthalenesulfonyl chloride (dansyl chloride). After extraction on a Waters C₁₈ Sep-Pak cartridge, the samples are analyzed by high pressure liquid chromotography using a step solvent change and a 3μ C₁₈ reverse phase column. The chromotographic conditions allowed complete analysis of the three polyamines within 10 min with a total run time of 13 min (sample injection and re-equilibrium of column). Standard curves were linear up to 1 μg polyamine and the coefficient of variation for the assay ranged from 4% at l μg polyamine per sample to 11% at 50 ng polyamine per sample. The assay is therefore both rapid and simple. Moreover, unlike other available methods, the present technique does not require duel pumps, ion pairing agents, solvent extraction or a gradient control system. The concentrations of putrescine, spermidine and spermine in rat lung, liver and kidney are reported.     

Determination of aliphatic amines in air by on-line solid-phase derivatization with HPLC-UV/FL

An easy, rapid, and efficient method using on-line solid-phase derivatization in HPLC is developed for the trace determination of aliphatic amines in air. Some fundamental studies on stop-flow, on-line, solid-phase derivatizations in HPLC are also investigated, such as optimization of the reaction detection HPLC system and band broadening. Air is sampled with silica gel tubes from different sites, including sewage areas, fish cleaning and processing rooms, and an organoleptic lab of the U.S. Food & Drug Administration (FDA). The trapped amines are desorbed with an acidic aqueous-organic solution, followed by pH adjustment of the eluates to pH 10. The resulting solution is directly injected into an on-line, precolumn, solid-phase derivatization and reversed-phase HPLC-UV/FL system, not requiring any further sample workup steps. The percent derivatizations are as high as 88 +/- 5% (n = 3) for primary amines, and 75 +/- 4% (n = 3) for diethylamine under optimized conditions (60 degrees C for 10 min). The recoveries for all amines are above 90%. The method is validated by a single-blind, spiked experiment with 1.1-4.4% relative standard deviation (RSD) in the range of 15-47 ppm. These results are confirmed by a GC-FID method performed in another lab. Amines are quantitated via calibration plots, with final concentrations from 0.02 to 0.38 mg/m3 air. It is suggested that this newer approach for the determination of amines and polyamines, using polymeric solid-phase reagents on-line, precolumn in HPLC, should prove generally successful for other amines and other sample types in the future.     

A Dilute and Shoot Strategy for Determining Alternaria Toxins in Tomato-Based Samples and in Different Flours Using LC-IDMS Separation

Alternaria toxins are emerging mycotoxins whose regulation and standardization are in progress by the European Commission and the European Committee for Standardization. This paper describes a dilute and shoot approach to determine five Alternaria toxins in selected food samples using liquid chromatography–tandem mass spectrometry (LC-MS/MS). The strategy involves sample extraction with acidified aqueous methanol, followed by a solvent change accomplished via sample evaporation and reconstitution. The quantification is based on isotope dilution, applying all corresponding isotopically labeled internal standards to compensate possible matrix effects of the analysis. The main advantages of the present method over other existing methods includes simple and effective sample preparation, as well as detection with high sensitivity. The five-fold sample dilution can decrease matrix effects, which were evaluated with both external and internal standard methods. The results demonstrated a limit of quantification lower than 1.0 µg/kg for all five analytes for the first time. The newly presented method showed acceptable accuracy (52.7–111%) when analyzing naturally contaminated and spiked standard samples at the described levels. The method was validated for tomato-based and flour samples (wheat, rye, and maize). The absolute recovery ranged from 66.7% to 91.6% (RSD < 10%). The developed method could be an alternative approach for those laboratories that exclude sample cleanup and pre-concentration of state-of-the-art instruments with enhanced sensitivity.