Effect of NaOH and NaCl on the disodiumn-decane phosphonate micellar aggregation number

The diffusion coefficient of disodiumn-decane phosphonate micelles was studied by polarography at 25°C in NaCl and in NaOH solutions, and the size and aggregation number of the micelles was computed as a function of Na⁺ concentration. All other conditions being equal, the addition of NaCl produces micelles with an aggregation number one order of magnitude larger than the NaOH addition. This is due to the increase of the effective charge per micellized head group produced by the reaction of OH- with the hydrolized head groups which are mainly present as-PO₃H- in the micellar Stern layer.     

Interfacial and aggregation properties of the binary mixture of decanoyl-N-methyl-glucamide and hexadecyltriphenylphosphonium bromide

The interfacial and aggregation behavior of the nonionic surfactant decanoyl-N-methyl-glucamide (Mega-10) with the cationic surfactant hexadecyltriphenylphosphonium bromide (HTPB) have been studied using interfacial tension measurements and fluorescence techniques. From interfacial tension measurements, the critical micellar concentrations (cmc) and various interfacial thermodynamic parameters have been evaluated. The experimental results were analyzed in the context of the pseudophase separation model, the regular solution theory, and the Maeda’s approach. These approaches allowed us to determine the interaction parameter and composition in the mixed state. By using the static quenching method, the mean micellar aggregation numbers of pure and mixed micelles of HTPB+Mega-10 were obtained. It was found that that the aggregation number decreases with increasing mole fraction of HTPB. This behavior is attributed to the presence of the bulky head group of HTPB, which creates steric head group incompatibility and/or electrostatic repulsion. The micropolarity of the micelle was monitored with pyrene fluorescence intensity ratio. It was observed that the increasing participation of HTPB induces the formation of micelles with a hydrated structure. The polarization of the fluorescent probe Rhodamine B was monitored in micellar medium and found to increase with the increase of ionic content. This behavior suggests the formation of mixed micelles with a more ordered or rigid structure.     

Rheological behavior of viscoelastic wormlike micelles in mixed sodium dodecyl trioxyethylene sulfate–monolaurin aqueous system

Rheological behavior of viscoelastic wormlike micelles in an aqueous system of mixed sodium dodecyl trioxyethylene sulfate (SDES)–monolaurin (ML) is presented. Dilute aqueous solution of SDES has a high fluidity and follows Newtonian liquid-like behavior due to formation of small globular type of micellar structure. Addition of lipophilic nonionic cosurfactant ML to dilute or semidilute solution of SDES decreases the interfacial curvature of the aggregates favoring one dimensional micellar growth, and hence, viscosity increases. After a certain concentration of ML, the elongated micelles get entangled with each other leading to the formation of viscoelastic wormlike micelles. The viscoelastic solution follows Maxwell model of a single stress relaxation mode at low-frequency region. Further addition of ML decreases the viscosity of the solution due to formation of micellar joints in the network structure. The viscosity of the viscoelastic wormlike micelles decreases upon heating, and the system with poor viscoelastic character is observed at higher temperatures.     

Formation and Characterization of Reversed Micelles Composed of Phospholipids and Fatty Acids

The formation of reversed micellar systems composed of phosphatidylcholine (PC) and fatty acid was newly demonstrated by a significant increase in water content in the organic ethyl oleate phase when the micelles were prepared by the contact method. The solubilized water concentration in the reversed micellar organic phase reached 3 wt%. The new systems are expected to be used as highly biocompatible reversed micellar systems. The structure of the reversed micelles composed of PC and oleic acid was characterized by determining the water concentration and by small-angle X-ray scattering analysis. The reversed micelles composed of PC and oleic acid formed in ethyl oleate were spherical. The radius of gyration was between 30 and 50 Å. The size of the reversed micelles decreased with an increase in the oleic acid concentration and was independent of the PC concentration. Experimental results indicated that the structure of the reversed micellar system was determined by the oleic acid concentration. An increase in the PC concentration caused an increase in the number of reversed micelles of the same size. These reversed micellar systems are expected to be used as solubilization media in pharmaceutical and food industries because they are not toxic.     

Interaction and Stability of Mixed Micelle and Monolayer of Nonionic and Cationic Surfactant Mixtures

Interaction and stability of binary mixtures of cationic surfactants hexadecyltrimethylammonium bromide (HTAB) or hexadecylpyridinium bromide (HPyBr) with nonionic surfactant decanoyl-N-methyl-glucamide (Mega-10) have been studied at different mole fraction of cationic surfactants by using interfacial tension measurements and fluorescence probe techniques. From interfacial tension measurements, the critical micellar concentration and various interfacial thermodynamic parameters have been evaluated. The experimental cmc's were analyzed with the pseudophase separation model, the regular solution theory, and the Maeda's approach. These approaches allowed us to determine the interaction parameter and composition in the mixed state. By using the static quenching method, the mean micellar aggregation numbers of pure and mixed micelles of HTAB + Mega-10 were obtained. It has been observed that the aggregation number of mixed micelles deviates negatively from the ideal behavior. The micropolarity of the micelle was monitored with pyrene fluorescence intensity ratio and found to be increase with the increase of ionic content. The polarization of fluorescence probe Rhodamine B was monitored at different mole fraction of cationic surfactants.     

Mixed micellization and interfacial properties of dodecyltrimethylammonium bromide and tetraethyleneglycol mono-n-dodecyl ether in absence and presence of sodium propionate

Mixed micelle formation and interfacial properties of aqueous binary surfactant combinations of dodecyltrimethylammonium bromide (C12TAB) and tetraethyleneglycol mono-n-dodecyl ether (C12E4) at 30 degrees C in absence and presence of sodium propionate (NaPr) have been investigated. The critical micelle concentration, aggregation number, micropolarity and interfacial adsorption have been quantitatively estimated by surface tension and steady-state fluorescence measurements. The micellar and adsorption characteristics like composition, activity coefficients and mutual interaction parameters have been estimated following different theoretical treatments like that of Clint, Rubingh, Rodenas, Maeda, Blankschtein and Rosen. The analysis reveals very small mole fraction of cationic surfactant in both the mixed micelles and mixed monolayer inspite of synergism. Blankschtein's model predicts a continuous decrease in synergism due to the salt effect of NaPr; Rubingh's approach, on the contrary, indicates an increase in it above 30 mM of NaPr concentration. Aggregation number variation with NaPr indicates the same. Mixed monolayer shows better synergism compared to that in mixed micelles which increases with the addition of sodium propionate above 30 mM concentration.     

Coexistence and growth of micellar species in a sugar-based surfactant/phenol mixture studied by analytical ultracentrifugation

Knowledge of the shape and size of surfactant micelles in the presence of small organic molecules is important for understanding the solubilization properties of micellar phases. In this work, structural information on micelles of mixed n-dodecyl-beta-d-maltoside (DM) and phenol, including the aggregation number, diffusion coefficient, and effective radius, was obtained using an analytical ultracentrifugation technique. The micelles were found to increase in size and undergo shape transition from quasispherical to cylindrical with an increase in the surfactant and phenol concentrations in the micellar phase. Importantly, the coexistence of different micellar species was observed in certain cases with the larger species double the size of the smaller one. Based on the results obtained, a two-step micellar growth model is proposed to describe the micelles shape transition in the system. In the first step, the micelles expand continuously, whereas in the second step, it undergoes a sudden shift from the existing micellar species to a larger species causing the coexistence of two micellar species. This micellar growth is attributed to molecular packing and intermicellar interaction energy parameters. The mechanism proposed can be applied to other mixed systems and utilized for devising chemicals for the efficient removal of pollutants.     

Effects of organic solvent addition on the aggregation and micellar growth of cationic dimeric surfactant 12-3-12,2Br-

The micellization and micellar growth of cationic dimeric surfactant propanediyl-alpha-omega-bis(dodecyldimethylammonium) bromide, 12-3-12,2Br-, have been studied in several water-organic solvent mixtures. The organic solvents were ethylene glycol, glycerol, 1,2-propylene glycol, 1,3-propylene glycol, acetonitrile, dioxane, formamide, and N,N-dimethylformamide. Results showed that the aggregation process was less favored in the binary mixtures than in pure water, which was explained by considering the influence of the solvophobic effect on micellization. The addition of organic solvents was accompanied by a diminution in the average aggregation number, Nagg, of the dimeric micelles. This diminution was due to the decrease in the interfacial Gibbs energy contribution, Delta G0interfacial, to the Gibbs energy of micellization caused by the decrease in the hydrocarbon/bulk-phase interfacial tension. As a result of the micelle size diminution, the concentration at which the sphere-to-rod transition occurred, C*, was higher in the mixtures than in pure water. Micelle size reduction is accompanied by a decrease in the ionic interactions and in the extra packing contribution to the deformation of the surfactants tails, making the formation of cylindrical micelles less favorable.     

Kinetics of Simultaneous Adsorption of Poly(vinylpyrrolidone) and Sodium Dodecyl Sulfate on Alumina Particles

The effect of Cibacron Blue 3GA (CB) and bovine serum albumin (BSA) as guest molecules on the microstructure of reversed micelles has been investigated with electrical conductivity measurements. CB as an affinity ligand was directly introduced to reversed micelles formed with a cationic surfactant, cetyltrimethylammonium bromide. The anionic CB has electrostatic interactions with the cationic surfactant and also has a strong binding affinity to BSA. The conductivity of reversed micellar systems increases gradually with the increase of temperature either with or without the addition of CB. The conductivity of reversed micellar systems increases with the addition of tributyl phosphate to the organic phase. No electrical percolation appears with an increase of temperature or water concentration. The conductivity of reversed micellar systems decreases with the addition of CB and decreases further with the addition of both CB and BSA. The conductivity of the organic phase is 3 orders of magnitude lower than that of the aqueous phase under the same CB concentration, which indicates that CB is probably confined to the closed microdomains of reversed micellar systems. The conductivity behavior of reversed micelles has not shown much difference with the methods used for the addition of CB either by the injection method or by phase transfer. Copyright 2000 Academic Press.     

Direct preparation of core cross-linked micelles in a nonselective solvent

This is the first light scattering study demonstrating that the size of micelles, the aggregation number, and the mobility of the core blocks of the micelles could be controlled by the length of the cross-linker in the micellar cores. The core cross-linked micelles were prepared using a poly[(4-pyridinemethoxy-methyl)styrene]-block-polystyrene (PPySt-b-PSt) diblock copolymer and perfluoroalkyl dicarboxylic acid. The PPySt-b-PSt copolymer formed the micelles in THF, a nonselective solvent, in the presence of the perfluoroalkyl dicarboxylic acid. The light scattering studies demonstrated that the micellar size and aggregation number were dependent on the chain length of the perfluoroalkyl dicarboxylic acid. Perfluoroazelaic acid produced micelles with a larger hydrodynamic radius and higher aggregation number than tetrafluorosuccinic acid. The micellization proceeded through the formation of the pyridinium carboxylate and the cross-linkage between the PPySt blocks via the dicarboxylic acid. The core cross-linked micelles were thermally stable and maintained its structure with changes in the temperature. A ¹H NMR analysis revealed that the micelles prepared by perfluoroazelaic acid had more mobility of the core blocks than those by tetrafluorosuccinic acid.     

Unusual micellar properties of multiheaded cationic surfactants in the presence of strong charge neutralizing salts

The aggregation properties of single-chain surfactants bearing one (H1), two (H2), and three (H3) trimethylammonium head groups have been studied by small-angle neutron scattering (SANS). Growth of aggregates was observed to decrease dramatically with an increase in the number of head groups in the surfactants. The micelles grow progressively smaller with every increase in the number of head groups of the surfactants. Aggregation number (N) continuously decreases and the fractional charge (alpha) gradually increases with the increase in the number of head groups. The semiminor axis (a) and semimajor axis (b=c) of the micelle decrease strongly with the increase in the number of head groups. In the case of H1, dramatic micellar growth is observed on addition of salts such as KBr and sodium salicylate, but this type of micellar growth is not observed in the cases of H2 and H3 when the above salts are added to their micellar solutions. Aggregation number and size of the micelles remain almost the same, even after addition of KBr at a concentration as high as 100 mM. This observation with multiheaded cationic surfactants is unusual. Clearly, the charge density at the head group level of surfactants markedly influences their micellar aggregation properties.     

Effect of N-glycinylmaleamic acid on microstructural characteristics and solubilization properties of sodium dodecyl sulfate micellar assemblies

The cosurfactant activity of N-glycinylmaleamic acid (NGMA) in sodium dodecyl sulfate (SDS) micelles has been demonstrated. The complementary techniques of electron spin resonance (ESR) and fluorescence spectroscopy have been used to draw information on hydration index (H), microviscosity (eta), and aggregation number (N) of micellar assemblies. The estimate of the critical micelle concentration of SDS in the presence of NGMA suggests a synergistic effect of NGMA. The enhanced solubilization of butyl propionate in the presence of NGMA in SDS micelles is explained on the basis of availability of larger interfacial area calculated from a simple spherical geometric model, combined with a low hydrophilicity index as estimated from ESR. Thus, addition of NGMA contributes to an increase of about 50% in ratio of area of polar shell (AP)/volume of hydration (Vh) ratio. The decrease in H accompanied by a decrease in eta with the incorporation of butyl propionate probably arises from solubilization of a butyl component inside the core with the adsorption of propionate ester on the interface.     

Liquid—liquid distribution in reversed micellar systems

The equilibrium distribution of a hydrophilic solute (M^z+ between an aqueous phase and a reversed micellar organic phase (consisting of a surfactant HA with aggregation number x, and dissolved in a hydrocarbon diluent) is analyzed quantitatively by treating the reversed micelles as a pseudophase. It is shown that when the M—A complex is strongly solubilized by the micellar pseudophase, the distribution coefficient (D) has a first-order dependence on the concentration of micellized surfactant (C_s). On the other hand, when the M—A complex is not solubilized by the reversed micelles, a plot of log D versus log C_s has a slope of (z/x); in this case the monomeric species HA is the active extractant and any effect that decreases surfactant aggregation (e.g. low aggregation number, small aggregation equilibrium constant) leads to an increase in the distribution coefficient.     

Self-assembly control of a pyridine-containing diblock copolymer by perfluorinated counter anions during salt-induced micellization

The micelle formation of poly[(4-pyridinemethoxymethyl)styrene]-block-polystyrene (PPySt-b-PSt) was studied in the nonselective solvent using perfluoroalkyl carboxylic acids. PPySt-b-PSt showed no self-assembly into micelles in THF, because this solvent was nonselective for the copolymer. Dynamic light scattering demonstrated that the diblock copolymer formed the micelles in the solvent in the presence of perfluoroalkyl carboxylic acids in which the number of carbons in the perfluoroalkyl chains was over eight. ¹H NMR revealed that the micellization proceeded through the salt formation of the pyridinium perfluoroalkyl carboxylate and through the aggregation of the perfluoroalkyl chains in the counter anions. The hydrodynamic radius and the aggregation number of the micelles increased with an increase in the length of the perfluoroalkyl chain. The copolymer needed less carboxylic acid with longer perfluoroalkyl chain to form the micelles. The copolymer produced the micelles with lower aggregation number and higher critical micelle concentration at higher temperature, although the micellar size was almost independent of the temperature. The micelles were unstable with respect to the variation in the temperature, and were dissociated into the unimers with the increase in the temperature. The micelles, however, were reconstructed by decreasing the temperature. This dissociation–reconstruction of the micelles was controlled reversibly not only by the temperature but also by the concentration of the perfluoroalkyl carboxylic acid. An increase in the acid concentration suppressed the dissociation into the unimers, while promoting the reconstruction of the micelles.     

SOLUBILIZATION IN MIXED REVERSE MICELLAR SYSTEMS OF AOT/NONIONIC SURFACTANTS/n-HEPTANE

Solubilization of water and aqueous NaCl solutions in mixed reverse micellar systems of anionic surfactant AOT and nonionic surfactants in n-heptane was studied. It was found that the maximum solubilization capacity of water was higher in the presence of certain concentrations of NaCl electrolyte, and these concentrations increased with the increase of nonionic surfactant content and their EO chain length. Soluibilization capacity was enhanced by mixing AOT with nonionic surfactants. The observed phenomena were interpreted in terms of the stability of the interfacial film of reverse micellar microdroplet and the packing parameter of the surfactant that formed mixed reverse micelles.     

Effects of ethylene glycol addition on the aggregation and micellar growth of gemini surfactants

Micellization of three didodecyl dicationic dibromide gemini surfactants with different methylene spacer lengths, 12-s-12,2Br- where s = 3-5 methylene groups, has been investigated in water-ethylene glycol, EG, mixtures with weight percentages of EG up to 50%. Subsequently, effects of the addition of the organic solvent on the micellar growth of these surfactants and on the surfactant concentration range where sphere-to-rod transitions occur were studied by means of steady-state and time-resolved fluorescence quenching and spectroscopic measurements. Results show that an increase in the weight percentage of ethylene glycol added to aqueous 12-s-12,2Br- (s = 3-5) micellar solutions causes the sphere-to-rod transition to occur at higher surfactant concentrations than in pure water. The diminution in the average aggregation number, N(agg), when wt % EG increases, provoked by the decrease in the interfacial Gibbs energy contribution to DeltaG degrees M, is the main factor responsible for this observation. The decrease in N(agg) is accompanied by a decrease in the ionic interactions and the extra packing contribution to the deformation of the surfactants tails, making formation of cylindrical micelles less favorable. Besides, an increase in the solvent content and polarity of the interfacial region does not favor formation of direct ion pairs, decreasing the tendency of micelles to grow.     

离子液体表面活性剂1-丁基-3-甲基咪唑烷基硫酸酯的合成及其在水溶液中的聚集行为

采用离子交换法,由1-丁基-3甲基咪唑氯盐（C4mimCl）和烷基硫酸钠合成了一系列无卤素的阴离子表面活性离子液体—1-丁基-3-甲基咪唑烷基硫酸酯[C4mim][CnH2n 1SO4](n=8,12,16),利用表面张力仪、稳态荧光光谱等手段考察了表面活性离子液体在水溶液表面及体相中的聚集行为,结果表明,与传统无机反离子相比,有机咪唑阳离子[C4mim] 作为反离子的离子液体型表面活性剂具有较高的表面活性,[C4mim] 产生的氢键引起的抑制分子规则排列的作用小于其促进分子有序排列的疏水作用。长烷基链的阴离子是界面膜及胶束的主要组成成分,阴离子疏水烷基碳链的增长虽然可促进胶束的形成,但却在一定程度上抑制[C4mim] 离子参与界面或胶束的形成;阴离子所带烷基链越长,越不利于阳离子[C4mim]＋参与界面膜或胶束的形成,界面膜或胶束中表面活性剂排布越松散,即界面张力越大,体系中胶束聚集数较小。     

Micellization of Sodium Dodecyl Sulfate in Glycerol Aqueous Mixtures

The effect of glycerol on both micellar formation and the structural evolution of the sodium dodecyl sulfate (SDS) aggregates in the context of the action mechanism of the cosolvent has been studied. The critical micelle concentration and the degree of counterion dissociation of the surfactant over a temperature range from 20°C to 40°C were obtained by the conductance method. The thermodynamic parameters of micellization were estimated by using the equilibrium model of micelle formation. The analysis of these parameters indicated that the lower aggregation of the surfactant is mainly due to a minor cohesive energy of the mixed solvent system in relation to the pure water. The effect of glycerol on the mean aggregation number of the micelles of SDS was analyzed by the static quenching method. It was found that the aggregation number decreased with the glycerol content. This reduction in the micellar size seems to be controlled by an increase in the surface area per headgroup, which was ascribed to a participation of glycerol in the micellar solvation layer. Studies on the micropolarity of the aggregates, as sensed by the probe pyrene, indicated that this microenvironmental parameter is almost unaffected by the presence of glycerol in the mixture. However, an increase in the micellar microviscosity at the surface region was observed from the photophysical behavior of two different probes, rhodamine B and auramine O. These results suggest a certain interaction of the cosolvent in the micellar solvation of SDS micelles.     

Influence of a hydrophobic diol on the micellar transitions of Pluronic P85 in aqueous solution

Micellization behavior of an amphiphilic ethylene oxide-propylene oxide-ethylene oxide tri-block copolymer Pluronic P85 [(EO)(26)(PO)(39)-(EO)(26)] in aqueous solution and in the presence of a hydrophobic C(14)diol (also known as Surfynol104) was examined by physico-chemical methods such as viscometry, cloud point (CP) and scattering techniques viz. dynamic light scattering (DLS) and small angle neutron scattering (SANS). The addition of diol decreases the cloud point and gelation temperature of aqueous Pluronic P85 copolymer solution. DLS and SANS measurements of the polymer in aqueous solution indicated micellar growth and sphere to rod transition in the presence of diol. Surfynol 104 is a sparingly water soluble diol surfactant with a solubility of approximately 0.1 wt%. However, up on addition to Pluronic solution, diol gets incorporated in the block copolymer micelles and leads to structural transition of the micelles. An increase in the temperature and the presence of added sodium chloride in the solution further enhances this effect. The addition of hydrophobic C(14)diol increases the hydrodynamic size and aggregation numbers of the micellar system. The micellar parameters for the copolymer in the presence of C(14)diol are reported at different temperatures and added sodium chloride concentrations.