Elaboration of thin colloidal silica films with controlled thickness and wettability

Silica films with controlled thickness and wettability have been formed by sequential adsorption of colloidal silica nanoparticles and a cationic polyelectrolyte (poly(allylamine hydrochloride) or poly(diallyldimethylammonium chloride)) was used as the binding agent. Whatever be the conditions used, the structure of films appeared dense and non-porous. Thicknesses varying from 12 to 430 nm and wettability varying from 5 to 60° were obtained when the pH or concentration of the silica solution was varied. Quartz crystal microbalance measurements evidenced the formation of regular and reproducible thin films mainly composed of silica nanoparticles. These films contained few polycations due to the formation of long-distance charge pairs between silica nanoparticles and polycations.     

Sol–gel-derived titania-hydroxypropylcellulose hybrid thin films of high refractive indices: solution components affecting the refractive index and uncracking critical thickness

Optically transparent, ca. 200–800 nm thick TiO₂-hydroxypropylcellulose (HPC) hybrid thin films were prepared from Ti(OC₃H₇ⁱ)₄–HPC–HCl–H₂O–C₃H₇ⁱOH solutions by the sol–gel method, where the as-deposited films were dried at 120 °C. The effects of the amount of HPC, H₂O and HCl in the starting solutions on the refractive index and uncracking critical thickness of the films were studied, where the effects on the critical thickness was discussed on the basis of in situ stress measurements during heating. The increase in HPC content increased the critical thickness and lowered the refractive index. The increase in HCl content resulted in a decrease in critical thickness and an increase in refractive index. Larger H₂O contents gave rise to a maximum in critical thickness while the refractive index was unaffected. Such variation in critical thickness with varying solution compositions was demonstrated to result from the differences in in-plane stress generated during heating. By optimizing the processing parameters an 810 nm thick TiO₂–HPC hybrid film of a refractive index of 1.84 was obtained.     

Preparation of thin polymer films with controlled drug release

Poly(N-isopropylacrylamide) (PAAm) is a thermal responsive polymer that undergoes a structural change in aqueous solution at its lower critical solution temperature (LCST). PAAm-modified silicon substrates were prepared and the effect of PAAm density on the thermal response of the modified surface was examined in terms of changes in the water contact angle as a basis for applying the structural change of the polymer to controlled drug release. Changes with temperature in the ability to load and release of the modified layer for drug were also examined using 2-acetoxybenzoic acid (aspirin) as a model drug. The amount of PAAm was found to greatly affect the thermal response and the ability to load and release of the modified layer for aspirin.     

Preparation of hollow silica microspheres with controlled shell thickness in supercritical fluids

This article presents a novel route to prepare hollow silica microspheres with well-defined wall thickness by using cross-linked polystyrene (PS) microspheres as templates with the assistance of supercritical carbon dioxide (SC-CO₂). In this approach, the cross-linked PS templates can be firstly prepared via emulsifier-free polymerization method by using ethylene glycol dimethacrylate or divinylbenzene as cross-linkers. Then, the silica shell from the sol–gel process of tetraethyl orthosilicate (TEOS) which was penetrated into the PS template with the assistance of SC-CO₂ was obtained. Finally, the hollow silica spheres were generated after calcinations at 600 °C for 4 h. The shell thickness of the hollow silica spheres could be finely tuned not only by adjusting the TEOS/PS ratio, which is the most frequently used method, but also by changing the pressure and aging time of the SC-CO₂ treatment. Fourier transform infrared spectroscopy, transmission electron microscopy, and scanning electron microscope were used to characterize these hollow silica spheres.     

Preparation and characterization of mesoporous silica thin films from polyethoxysiloxanes

Tetraethoxysilane (TEOS) and polyethoxysiloxanes (PEOSs; prepared by the acid‐catalyzed hydrolytic polycondensation of TEOS) were subjected to the sol–gel process in the presence of cetyltrimethylammonium bromide (CTAB), respectively. The PEOSs with M_w 700–26,000, as prepared by sol–gel coating of TEOS and PEOS under various conditions, were used. Uniform and crack‐free thin films of thickness 276–613 nm were prepared by spin‐coating of a PEOS solution containing CTAB. When the coating films were sintered at 400 °C, the combustion of ethoxy groups and CTAB took place to provide porous silica thin films. The structure of the thin films was found to be dependent on the molecular weight of PEOS and the molar ratio of CTAB/Si: lamellar or hexagonal phase was observed for M_w less than 15,000 and for CTAB/Si molar ratios greater than 0.10. Honeycomb structures were observed for M_w less than 5000 and for CTAB/Si molar ratios of 0.15. The honeycomb structure was also observed by atomic force microscopy and transmission electron microscope. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2542–2550, 2006     

Induced refractive index in thin films of polymeric organosilanes under UV irradiation

Changes in the refractive indices of thin films of three polymeric organosilanes at wavelengths of 400-1500 nm, occurring under UV radiation, were examined.     

Preparation of amino-functionalized mesoporous silica thin films with highly ordered large pore structures

Highly ordered amino-functionalized mesoporous silica thin films have been directly synthesized by co-condensation of tetraethoxysilane (TEOS) and 3-aminopropyltriethoxysilane (APTES) in the presence of triblock copolymer Pluronic P123 surfactant species under acidic conditions by sol-gel dip-coating. The effect of the sol aging on thin films organization is systematically studied, and the optimal sol aging time is obtained. The amino-functionalized mesoporous silica thin films exhibit a long-range ordering of 2D hexagonal (p6mm) mesostructure with a large pore size of 8.3 nm, a large Brunauer–Emmett–Teller (BET) specific surface area of 680 m² g⁻¹ and a large pore volume of 1.06 cm³ g⁻¹ following surfactant extraction as demonstrated by X-ray diffraction (XRD), Transmission electron microscope (TEM), and physical adsorption techniques. Based on BET surface area and weight loss, the surface coverage of amino-groups for the amino-functionalized mesoporous silica thin films is calculated to be 3.2 amino-groups per nm². Moreover, the functionalized thin films display improved properties for immobilization of cytochrome c in comparison with pure-silica mesoporous thin films.     

Highly transparent superhydrophobic thin film with low refractive index prepared by one-step coating of modified silica nanoparticles

An easy and effective method to prepare superhydrophobic thin film has been developed. The film with optically transparent and low refractive index was composed by one-step coating with modified silica nanoparticles. The silica nanoparticles were prepared by sol–gel process of hydrolysis and condensation of alkoxysilane compounds and then surface modification silica nanoparticles, 50 ± 10 nm, were accomplished using methoxytrimethylsilane (MOTMS). Water contact angle of film increased with the weight of MOTMS of silica sol. When the weight of MOTMS was optimized, the water contact angle and sliding angle of film were 152.8° and less than 10°, respectively. The transmittance of film was also increased as compared to the un-coated microscope glass slide, from 91 to 93.5 %. The refractive index of the film was approximately 1.09 as measured by ellipsometer. The superhydrphobic thin film was also successfully made by using spray coating and the water contact angle of this film was more than 160°. Surface morphology of difference coating methods, dip and spray, were studied. Our result suggests that the film can be applied for superhydrophobicity and optical applications.     

Micellar transitions in solvent-annealed thin films of an amphiphilic block copolymer controlled with tunable surface fields

We investigated the response of symmetric poly(styrene-block-4vinylpyridine) P(S-b-4VP) diblock copolymer micelles to surface fields of variable strength at free surfaces and substrate interfaces when the micelles as spun were subjected to solvent annealing. Free surface interactions were controlled with solvent annealing in solvents of varied selectivity. On exposure to vapors of a solvent strongly selective for PS, the micelles retained their spherical shape but grew into cylindrical micelles or lamellar nanostructures via fusion on exposure to slightly selective or neutral solvent vapors. Giant 2D disks that completely wetted PS-grafted substrates resulted when spherical micelles were exposed to vapors of a highly selective solvent for P4VP. The interfacial interactions were controlled through subjecting them to UV/ozone (UVO) substrates initially coated with an end-grafted layer of short PS chains, with which the grafted PS chains became oxidized, degraded, or totally removed through UVO treatment for a controlled duration. When thin films were annealed in vapors of THF, the structural transition from spherical to cylindrical micelles depended on the interfacial field. On applying selective UVO exposure of optimal duration, we fabricated a substrate with two interfacial chemistries that promoted varied micellar species (spherical and cylindrical micelles) with a sharp boundary developed within thin films through solvent annealing for a controlled duration.     

Fabrication of lotus-leaf-like nanoporous silica flakes with controlled thickness

Lotus-leaf-like silica flakes with a three-dimensionally (3D) connected nanoporous structure and controllable thickness have been facilely synthesized; the flakes produced exhibited superior performance in adsorbing enzymes to their microspheric analogues.     

Preparation and photochromism of Keggin-type molybdphosphoric acid/silica mesoporous composite thin films

Using tetraethoxysilane and 3-aminopropyltriethoxysilane as the silica sources, amino-functionalized organic/inorganic hybrid mesoporous silica thin films with 2-dimensional hexagonal structure have been synthesized by evaporation induced self-assembly process in the presence of cetyltrimethyl ammonium bromide templates under acid conditions. The Keggin-type molybdphosphoric acid (PMo) is incorporated into the mesoporous silica thin films with amino-groups by wetness impregnation, and the PMo/silica mesoporous composite thin films are obtained. The results of X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), and Fourier transform infrared (FTIR) spectra indicate the PMo molecules maintain Keggin structure and are homogeneously distributed inside mesopores. The composite thin films possess excellent reversible photochromic properties, and change from colorless to blue under ultraviolet irradiation. The photochromic mechanism of the composite thin films is studied by ultraviolet-visible (UV-vis), electron spin resonance (ESR) and X-ray photoelectron spectroscopy (XPS) spectra. It is shown that intervalence charge transfer (IVCT) and ligand-to-metal charge transfer (LMCT) are the main reasons of photochromism. PMo anions interact strongly with amino-groups of the mesoporous suface via hydrogen bond and electrostatic force. After ultraviolet irradiation, the charge transfer occurs by reduction of heteropolyanions accompanying the formation of heteropolyblues with multivalence Mo(VI, V), and the bleaching process of composite thin films is closely related to the presence of oxygen.     

In situ infrared spectroscopy study on imidization reaction and imidization-induced refractive index and thickness variations in microscale thin films of a poly(amic ester)

Poly(amic ester) (PAE) is a soluble precursor of polyimide that has attracted interest from both the microelectronic and the flat-panel display industries because of its several important advantages, including excellent solubility, high hydrolytic stability, and solvent-free film formation, over the polyimide precursor, poly(amic acid), for which monomer-polymer equilibration always occurs in solution due to its carboxylic acid groups. In this study, poly(3,4'-oxydiphenylene pyromellitamic diethyl ester) (PMDA-3,4'-ODA PAE) was chosen as a PAE precursor, and its thermal imidization behavior in microscale thin films was investigated quantitatively for the first time using time-resolved infrared (IR) spectroscopy. In addition, the variations of the film refractive index and thickness with temperature and time were determined in detail from the time-resolved IR spectra and are fully interpreted in this paper by considering the imidization kinetics of the precursor.     

Synthesis of core-shell structured dual-mesoporous silica spheres with tunable pore size and controllable shell thickness

Core-shell structured dual-mesoporous silica spheres (DMSS) that possess smaller pores (2.0 nm) in the shell and larger tunable pores (12.8-18.5 nm) in the core have been successfully synthesized by utilizing an amphiphilic block copolymer (polystyrene-b-poly (acrylic acid), PS-b-PAA) and cetyl trimethyl ammonium bromide (CTAB) as cotemplates. The thickness of the shells and the larger pore size in the core could be easily tuned by changing the amounts of TEOS and the hydrophobic block (PS) length during synthesis, respectively. By encapsulating hydrophobic magnetite nanoparticles into the cores, superparamagnetic dual-mesoporous silica spheres were obtained. Drug storage and release testing results showed that the diffusing rate of the stored drug could be efficiently controlled by changing the shell thickness of DMSS.     

Photochemically-induced refractive index and fluoresence patterning on polymer films

The molecular design for large photo-induced refractive index changes in transparent visible light region was proposed and realized with norbornadiene polymers and poly(vinyl cinnamate). The patterning of pure refractive-index contract on their transparent films was made with near-field scanning optical microscopy (NSOM). Reversible fluorescence patterning on polymer films is also presented by using controlled energy transfer from a fluorescent pyromethene to a photochromic diarylethene.     

Mechanism of a self-templating synthesis of monodispersed hollow silica nanospheres with tunable size and shell thickness

This study clarifies the mechanism of the hollow structure formation in the simple self-templating preparation of monodispersed hollow silica structures; the role of the polarity of washing solvent in creating the hollow structure is emphasized.     

Light induced refractive index changes in PMMA films doped with styrene

Solutions of poly(methyl methacrylate) in styrene are used to produce thin polymer films (1m–20m) saturated with styrene monomer. In the illuminated areas refractive index changes up to 10^–2 are achieved by photoinduced polymerisation. The index patterns may be fixed by annealing treatments removing the residual monomer.We thank P. Hertel, M. Kopietz, M. D. Lechner and D. Steinmeier for valuable discussions. Financial support of the Stiftung Volkswagenwerk is gratefully acknowledged.     

Control of refractive index of sol-gel tungsten oxide films

Tungsten oxide films were prepared by a complexing agent-assisted sol-gel process. All the films were at 500°C were crystalline and transparent. The refractive index n and extinction coefficient k of the films were calculated from the transmittance and reflectance spectra in the visible and infrared regions. The values of n were lowered to depend on the organic ligands used in the preparation of the sols. The use of such ligands may be a mean to control the refractive index of coatings.