Regime diagram of the development of long-wave near-wall disturbances in a hypersonic boundary layer

A regime diagram of the development of slow near-wall disturbances induced by an unsteady self-induced pressure perturbation in a hypersonic boundary layer is constructed for a disturbance wavelength greater than the boundary layer thickness. It is shown that the main factors shaping the perturbed flow are the gas enthalpy near the body surface, the intensity of the viscous-inviscid interaction, and the nature (sub- or supersonic) of the main part of the boundary layer. Nonlinear boundary-value problems are formulated for regimes in which the near-wall boundary layer region plays a decisive role. Numerical and analytical solutions are obtained in the linear approximation. It is shown that intensification of the viscous-inviscid interaction or an increase in the role of the supersonic main region of the boundary layer impart generally supersonic properties to the main part of the boundary layer, i.e. the upstream propagation of the disturbances is damped and the disturbance growth downstream becomes more intense. Damping of the viscous-inviscid interaction and an increase in the role of the subsonic main part of the boundary layer have the opposite effect. Surface cooling increases the effect of the main part of the boundary layer on the formation of pressure disturbances and surface heating leads to an increase in the effect of the near-wall boundary layer region. It is also shown that for the regimes considered disturbances propagate in a direction opposite to that of the free stream from the turbulent flow region located downstream of the local disturbance development region.Translated from Izvestiya Rossiiskoi Academii Nauk, Mekhanika Zhidkosti i Gaza, No. 6, 2004, pp. 59–71. Original Russian Text Copyright © 2004 by Bogolepov and Neiland.     

Tollmien-Schlichting Waves in a Hypersonic Boundary Layer Flow in the Neighborhood of a Cooled Surface

A nonlinear time-dependent model of the development of longwave perturbations in a hypersonic boundary layer flow in the neighborhood of a cooled surface is constructed. The pressure in the flow is assumed to be induced the combined variation of the thicknesses of the near-wall and main parts of the boundary layer. Numerical and analytic solutions are obtained in the linear approximation. It is shown that if the main part of the boundary layer is subsonic as a whole, its action reduces the perturbation damping upstream and the perturbation growth downstream, while a supersonic, as a whole, main part of the boundary layer creates the opposite effects. An analysis of the solutions obtained makes it possible to conclude that the asymptotic model proposed can describe the three-dimensional instability of the Tollmien-Schlichting waves.     

Direct numerical simulation of disturbances generated by periodic suction-blowing in a hypersonic boundary layer

A numerical algorithm and code are developed and applied to direct numerical simulation (DNS) of unsteady two-dimensional flow fields relevant to stability of the hypersonic boundary layer. An implicit second-order finite-volume technique is used for solving the compressible Navier–Stokes equations. Numerical simulation of disturbances generated by a periodic suction-blowing on a flat plate is performed at free-stream Mach number 6. For small forcing amplitudes, the second-mode growth rates predicted by DNS agree well with the growth rates resulted from the linear stability theory (LST) including nonparallel effects. This shows that numerical method allows for simulation of unstable processes despite its dissipative features. Calculations at large forcing amplitudes illustrate nonlinear dynamics of the disturbance flow field. DNS predicts a nonlinear saturation of fundamental harmonic and rapid growth of higher harmonics. These results are consistent with the experimental data of Stetson and Kimmel obtained on a sharp cone at the free-stream Mach number 8.     

Three-wave interactions between disturbances in the hypersonic boundary layer on impermeable and porous surfaces

The interaction between disturbances in the hypersonic boundary layer on impermeable and porous surfaces is considered within the framework of weakly-nonlinear stability theory. It is established that on the impermeable surface nonlinear interactions between different waves (acoustic and vortex) occur in the parametric resonance regime. The role of pumping wave is played by a plane acoustic wave. The nonlinear interactions take place over a wide frequency range and can lead to the packet growth of Tollmien-Schlichting waves. On the porous surface the analogous interactions are fairly weak and result in a slight decay of the acoustic mode and a slight amplification of the vortex mode. This leads to the dragging out of the laminar flow regime and the regions of linear disturbance growth. In this situation the low-frequency spectrum of the vortex modes may be filled on account of the nonlinear processes occurring in the three-wave systems between the vortex components.     

Numerical simulation of receptivity of a hypersonic boundary layer to acoustic disturbances

Direct numerical simulations of the evolution of disturbances in a viscous shock layer on a flat plate are performed for a free-stream Mach number M _∞ = 21 and Reynolds number Re _L = 1.44 · 10⁵. Unsteady Navier-Stokes equations are solved by a high-order shock-capturing scheme. Processes of receptivity and instability development in a shock layer excited by external acoustic waves are considered. Direct numerical simulations are demonstrated to agree well with results obtained by the locally parallel linear stability theory (with allowance for the shock-wave effect) and with experimental measurements in a hypersonic wind tunnel. Mechanisms of conversion of external disturbances to instability waves in a hypersonic shock layer are discussed. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 48, No. 3, pp. 84–91, May–June, 2007.     

Response of a hypersonic blunt cone boundary layer to slow acoustic waves with assessment of various routes of receptivity

The hypersonic boundary-layer receptivity to slow acoustic waves is investigated for the Mach 6 flow over a 5-degree half-angle blunt cone with the nose radius of 5.08 mm. The plane acoustic wave interacts with the bow shock, and generates all types of disturbances behind the shock, which may take various routes to generate the boundary-layer unstable mode. In this paper, two routes of receptivity are investigated in detail. One is through the disturbance in the entropy layer. The other is through the slow acoustic wave transmitted downstream the bow shock, which can excite the boundary-layer mode due to the synchronization mechanism. The results show that, for a low frequency slow acoustic wave, the latter route plays a leading role. The entropy-layer instability wave is able to excite the first mode near the neutral point, but its receptivity efficiency is much lower.     

Statistical laws of the pressure fluctuations in a hypersonic turbulent boundary layer

The results of measuring the pressure fluctuations on the wall of the nozzle of a hypersonic wind tunnel beneath a developed turbulent boundary layer are presented for the Mach number M_∞ = 7.5. On the basis of a statistical analysis, it is shown that the action of the turbulent flow is dynamically similar to the propagation of a random sequence of wave packets with continuously distributed temporal and spatial scales. Low-frequency disturbances are associated with large-scale structures of long duration that propagate at a mean-statistical velocity similar in value to the outer flow velocity. The continuous generation of weakly-correlated small-scale disturbances ensuring the maintenance and development of turbulence occurs chiefly in the inner region of the boundary layer. Spectral estimates of the power generated by the turbulent flow in the wall region of the boundary layer are presented.     

The effects of variable specific heat on the stability of hypersonic boundary layer on a flat plate

The gas temperature within hypersonic boundary layer flow is so high that the specific heat of gas is no longer a constant but relates to temperature. How variable specific heat influences on boundary layer flow stability is worth researching. The effect of the variable specific heat on the stability of hypersonic boundary layer flows is studied and compared with the case of constant specific heat based on the linear stability theory. It is found that the variable specific heat indeed has some effects on the neutral curves of both the first-mode and the second-mode waves and on the maximum rate of growth also. Therefore, the relationship between specific heat and temperature should be considered in the study of the stability of the boundary layer.     

Nonlinear evolution of Klebanoff type second mode disturbances in supersonic flat-plate boundary layer简

Studying the evolution of 3D disturbances is of crucial theoretical importance for understanding the transition process. The present study concerns the nonlinear evolution of second mode unstable disturbances in a supersonic boundary layer by the numerical simulation, and discusses the selectivity of 3D disturbances and possibility to transition. The results indicate that a Klebanoff type nonlinear interaction between 2D and 3D disturbances with the same frequency may amplify a band of 3D disturbances centered at a finite spanwise wavenumber. That is, certain 3D disturbances can be selectively and rapidly amplified by the unstable 2D disturbances, and certain small-scale 3D structures will appear.     

Controlling the disturbances in a hypersonic flat-plate shock layer by unsteady action from the surface

The results of a wind-tunnel experiment on the joint action of periodic acoustic fast-mode disturbances of the outer flow and disturbances generated at the leading edge of a plate on the hypersonic (M_∞ = 21) viscous shock layer on the plate are presented. The possibility of positively controlling the intensity of density fluctuations in the plate shock layer by means of disturbances introduced from the leading edge is shown. Direct numerical simulation of the suppression (enhancement) of disturbances under the simultaneous action on the shock layer of the two-dimensional fast-mode acoustic waves in the outer flow and the source of two-dimensional suction/injection disturbances near the leading edge of the plate is performed under the experimental conditions. The experimental and calculated results are shown to be in good agreement.     

Evolution of a 2-D disturbance in a supersonic boundary layer and the generation of shocklets

Through direct numerical simulation, the evolution of a 2-D disturbance in a supersonic boundary layer has been investigated. At a chosen location, a small amplitude T-S wave was fed into the boundary layer to investigate its evolution. Characteristics of nonlinear evolution have been found. Two methods were applied for the detection of shocklets, and it was found that when the amplitude of the disturbance reached a certain value, shocklets would be generated, which should be taken into consideration when nonlinear theory of hydrodynamic stability for compressible flows is to be established.     

Prediction of hypersonic boundary layer transition on sharp wedge flow considering variable specific heat

When the air temperature reaches 600 K or higher, vibration is excited. The specific heat is not a constant but a function of temperature. Under this condition, the transition position of hypersonic sharp wedge boundary layer is predicted by using the improved eN method considering variable specific heat. The transition positions with different Mach numbers of oncoming flow, half wedge angles, and wall conditions are computed condition, the nearer to the Mach number The results show that for the same oncoming flow condition and wall transition positions of hypersonic sharp wedge boundary layer move much leading edge than those of the flat plate. The greater the oncoming flow the closer the transition position to the leading edge.     

Investigation of a hypersonic crossing shock wave/turbulent boundary layer interaction

A combined theoretical and experimental study is presented for the interaction between crossing shock waves generated by (10°, 10°) sharp fins and a flat plate turbulent boundary layer at Mach 8.3. The theoretical model is the full 3-D mean compressible Reynolds-averaged Navier-Stokes RANS) equations incorporating the algebraic turbulent eddy viscosity model of Baldwin and Lomax. A grid refinement study indicated that adequate resolution of the flowfield has been achieved. Computed results agree well with experiment for surface pressure and surface flow patterns and for pitot pressure and yaw angle profiles in the flowfield. The computations, however, significantly overpredict surface heat transfer. Analysis of the computed flowfield results indicates the formation of complex streamline and wave structures within the interaction region.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1.0 and the AMS fonts, developed by the American Mathematical Society.     

Effect of disturbances at inlet on hypersonic boundary layer transition on a blunt cone at small angle of attack

To investigate the effect of different disturbances in the upstream, we present numerical simulation of transition for a hypersonic boundary layer on a 5-degree half-angle blunt cone in a freestream with Mach number 6 at 1-degree angle of attack. Evolution of small disturbances is simulated to compare with the linear stability theory （LST）, indicating that LST can provide a good prediction on the growth rate of the disturbance. The effect of different disturbances on transition is investigated. Transition onset distributions along the azimuthal direction are obtained with two groups of disturbances of different frequencies. It shows that transition onset is relevant to frequencies and amplitudes of the disturbances at the inlet, and is decided by the amplitudes of most unstable waves at the inlet. According to the characteristics of environmental disturbances in most wind tunnels, we explain why transition occurs leeside-forward and windside-aft over a circular cone at an angle of attack. Moreover, the indentation phenomenon in the transition curve on the leeward is also revealed.     

Mechanism of transition in a hypersonic sharp cone boundary layer with zero angle of attack

Firstly, the steady laminar flow field of a hypersonic sharp cone boundary layer with zero angle of attack was computed.Then,two groups of finite amplitude T-S wave disturbances were introduced at the entrance of the computational field,and the spatial mode transition process was studied by direct numerical simulation (DNS) method. The mechanism of the transition process was analyzed.It was found that the change of the stability characteristics of the mean flow profile was the key issue.Furthermore,the characteristics of evolution for the disturbances of different modes in the hypersonic sharp cone boundary layer were discussed.     

Evolution of disturbances in a laminarized supersonic boundary layer on a swept wing

Experimental data on stability of a three-dimensional supersonic boundary layer on a swept wing are presented. The experiments are performed on a swept wing model with a lenticular profile with a 40° sweep angle of the leading edge at a zero angle of attack. The supersonic boundary layer on the swept wing was laminarized with the use of distributed roughness. A pioneering study of interaction of traveling and stationary disturbances is performed. Some specific features of this interaction are identified. The main reason for turbulence emergence in a supersonic boundary layer on a swept wing is demonstrated to be secondary crossflow instability. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 49, No. 2, pp. 40–46, March–April, 2008.     

On the influence of elevated surface temperatures on hypersonic shock wave/boundary layer interaction at a heated ramp model

Although important flow parameters as Mach number, Reynolds number and total enthalpy can be reproduced in most hypersonic experiments quite well, due to different surface temperature effects in wind tunnel and flight, scaling as well as specific flow properties of shock wave/boundary layer interactions are different. This especially holds for short-duration facilities like, e.g. shock tunnels where due to short running times the models remain more or less at ambient temperature. To overcome this shortcoming, an experimental study has been conducted using a preheatable ramp model with 15° ramp angle. This allowed us to adjust the surfaces to an arbitrary temperature just before the experiment started. Pressure and heat flux measurements clearly showed the effect of varying surface and free stream temperatures. These results are supported by schlieren pictures and infrared measurements. The comparison of the measurements with theoretical and numerical results shows a good agreement. Separation bubble scaling laws proposed by Katzer and Davis have been applied and partially confirmed using the local conditions of the boundary layer at separation.     

Laminar boundary layer separation at a fin-body junction in a hypersonic flow

Planar laser-induced fluorescence (PLIF) imaging was performed to visualize the fin bow shock, separation shock, viscous shear layer and recirculation region of the flowfield at the junction of a blunt fin and a flat plate. Making use of the temperature dependence of the PLIF technique, images were made sensitive to temperature to provide qualitative information on the flowfield. The PLIF technique was also used as the basis for a flow-tagging technique, making it possible to measure a velocity component and to demonstrate the reverse flow of the separated region. Flow visualisation of the plane of symmetry allowed determination of the point of boundary layer separation, the angle of the separation shock and the bow shock standoff distance. These parameters were compared with predictions made by computational fluid dynamic simulations of the flowfield. Good agreement between theory and experiment was achieved. Comparisons between theoretical and experimental velocity measurements showed good agreement. Received 17 October 2000 / Accepted 13 November 2000     

Laminar-turbulent transition in the boundary layer on cones in a hypersonic flow at high Reynolds numbers per meter

The laminar-turbulent transition is experimentally studied in boundary-layer flows on cones with a rectangular axisymmetric step in the base part of the cone and without the step. The experiments are performed in an A-1 two-step piston-driven gas-dynamic facility with adiabatic compression of the working gas with Mach numbers at the nozzle exit M _∞ = 12–14 and pressures in the settling chamber P₀ = 60–600 MPa. These values of parameters allow obtaining Reynolds numbers per meter near the cone surface equal to Re _1e = (53–200) · 10⁶ m ⁻¹. The transition occurs at Reynolds numbers Re _tr = (2.3–5.7) · 10⁶. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 48, No. 3, pp. 76–83, May–June, 2007.     

Numerical modeling of the receptivity of a supersonic boundary layer to acoustic disturbances

The receptivity of a supersonic (M_∞ = 6) boundary layer on a flat plate to acoustic disturbances is investigated on the basis of a numerical solution of the 2D Navier-Stokes equations. Numerical results obtained for fast and slow acoustic waves impinging on the plate at zero angle agree qualitatively with asymptotic theory. Calculations carried out for other angles of incidence of the acoustic waves reveal new features of the perturbation field in the neighborhood of the leading edge of the plate. It is shown that, due to visco-inviscid interaction, the shock formed near the leading edge may significantly affect the acoustic field and the receptivity.