Di-tert-butyl(N-pyrrolyl)phosphane,-sulfide, and-selenide, studied by multinuclear magnetic resonance

 Di-tert-butyl(N-pyrrolyl)phosphane (1),-sulfide (2) and-selenide (3) were studied by ¹H, ¹³C, ¹⁵N, ³¹P and ⁷⁷Se NMR spectroscopy in solution. Restricted rotation about the P–N bond was observed for 1 (ΔG^≠ _C≈58.5 kJ/mol) and 2, 3 (ΔG^≠ _C≈45 kJ/mol) by ¹H and ¹³C NMR at variable temperature. The fairly high pyrrolyl rotation barrier in 1 is ascribed to the expected steric effects exerted by the tert-butyl groups and to repulsion between the lone pairs of electrons at the phosphorus and nitrogen atoms. These repulsive forces are reduced in 2 or 3, or in di-tert-butyl(phenyl) phosphane (ΔG^≠ _C≈44 kJ/mol). Signs of coupling constants ⁿJ(³¹P, ¹³C) and ⁿ⁺¹J(³¹P, ¹H) (n=2, 3) were determined by two-dimensional (2D) ¹³C/¹H heteronuclear shift correlations. The preferred orientation of the pyrrolyl group in 1 is evident from the coupling constants ²J(³¹P, ¹³C(2))=+35.4 Hz and ²J(³¹P, ¹³C(5))=−9.3 Hz, typical of C(2) in syn and C(5) in anti position with respect to the assumed axis of the phosphorus lone pair. Hahn-echo extended (HEED) polarization transfer pulse sequences served for measuring ¹J(³¹P, ¹⁵N) and isotope induced chemical shifts ¹Δ^15/14N(³¹P) from ³¹P NMR spectra. Received: 4 April 1996/Revised: 6 May 1996/Accepted: 11 May 1996     

Isokinetic relationships in unimolecular heterolysis. Mechanism of ionization of covalent bond

Various types of isokinetic (isoparametric) relationships in heterolytic reactions were summarized and critically analyzed. It was presumed that the series of substrate reactivity is reversed after passing the isoparametric point, and the bimolecular reaction mechanism changes to unimolecular: S_N2-S_N1, S_N2-E1, S_E2-S_E1, S_E2-S_N1, and S_N2(SSIP)-S_N2(C⁺). Three particular cases of isoparametric relationships are discussed: (1) isoentropy (ΔS ^≠ = const) which reflects formation of contact ion pair; (2) isoenthalpy (ΔH ^≠ = const) which reflects formation of space-separated ion pair; and (3) isoenergy (ΔG ^≠ = const), when ΔH ^≠ = ΔG ^≠ = ΔE _r. The rate of heterolysis in cyclohexane does not depend on the substrate nature, and a universal minimal rate of heterolysis exists, k25 ≈ 10⁻¹⁰ s⁻¹, τ_1/2 = 220 years. There is no nucleophilic assistance by the solvent in unimolecular heterolysis.     

Regioselective hydrolysis of ketenimines derived from NH-acids and acetylenic esters in the presence of <Emphasis Type="Italic">tert</Emphasis>-butyl isocyanide under neutral conditions

The regioselective hydrolysis of ketenimines derived from NH-acids, such as 2,2,2-trichloro-N-phenylacetamide or ethyl-2-anilino-2-oxoacetates and acetylenic esters in the presence of tert-butyl isocyanide in a THF/H₂O system (1/1) without any catalysis leads to a diastereomeric mixture of dialkyl 2-[(tert-butylamino)carbonyl]-3-[(2,2,2-trichloroacetyl)anilino]succinates and dialkyl 2-[(tert-butylamino)carbonyl]-3-[2-ethoxy-2-oxoacetyl)anilino]-succinates in good yields. Dynamic NMR effects were observed in the ¹³C NMR spectra of diethyl 2-[(tert-butylamino)carbonyl]-3-[(2,2,2-trichloroacetyl)anilino]succinate as a result of restricted rotation around the N-aryl single bond. The free energy of activation (ΔG ^#) for this process is 37.9 kJ mol⁻¹ which leads to an observable atropisomerism. Correspondence: Dr. Farough Nasiri PhD, Department of Chemistry, Faculty of Sciences, University of Kurdistan, P.O. Box 66315-416, Sanandaj, Iran.     

Synthesis,Characterization, and Crystal Structures of Metal Amide Cage Complexes Containing a M<Subscript>4</Subscript>O<Subscript>4</Subscript> (M = Nb,Ta) Core Unit

Metal cage complexes [(Me₂N)₃MO]₄ (M = Nb, 3; Ta, 4) have been prepared from the reactions of M(NMe₂)₅ (M = Nb, 1; Ta, 2) with water. Single crystal X-ray diffraction studies of 3 and 4 reveal that they adopt cubane-like structures with M–O bridges. Variable-temperature NMR studies of –NMe_AMe_B rotations in 3 and 4 have been performed to give the following activation parameters for the exchanges: ΔH ^≠ = −1.4(1.1) kJ/mol, ΔS ^≠ = −209(8) J/mol K, \Updelta G _{30 8  \textK} ¹ = 6 4( 2)  \textkJ/\textmol \Updelta G_{{_{{ 30 8\;{\text{K}}}} }}^{{^{ \ne } }} = 6 4\left( 2\right)\;{\text{kJ}}/{\text{mol}} for 3, and ΔH ^≠ = −0.9(1.2) kJ/mol, ΔS ^≠ = −2.1(0.2) × 10² J/mol K, \Updelta G _{30 8  \textK} ¹ = 6 3( 6)  \textkJ/\textmol \Updelta G_{{ 30 8\;{\text{K}}}}^{{^{ \ne } }} = 6 3\left( 6\right)\;{\text{kJ}}/{\text{mol}} for 4.     

Regioselective hydrolysis of ketenimines derived from NH-acids and acetylenic esters in the presence of tert -butyl isocyanide under neutral conditions

The regioselective hydrolysis of ketenimines derived from NH-acids, such as 2,2,2-trichloro-N-phenylacetamide or ethyl-2-anilino-2-oxoacetates and acetylenic esters in the presence of tert-butyl isocyanide in a THF/H₂O system (1/1) without any catalysis leads to a diastereomeric mixture of dialkyl 2-[(tert-butylamino)carbonyl]-3-[(2,2,2-trichloroacetyl)anilino]succinates and dialkyl 2-[(tert-butylamino)carbonyl]-3-[2-ethoxy-2-oxoacetyl)anilino]-succinates in good yields. Dynamic NMR effects were observed in the ¹³C NMR spectra of diethyl 2-[(tert-butylamino)carbonyl]-3-[(2,2,2-trichloroacetyl)anilino]succinate as a result of restricted rotation around the N-aryl single bond. The free energy of activation (ΔG ^#) for this process is 37.9 kJ mol⁻¹ which leads to an observable atropisomerism.     

Synthesis,molecular structure,non-isothermal decomposition kinetics and adiabatic time to explosion of 3,3-dinitroazetidinium 3,5-dinitrosalicylate

The title compound 3,3-dinitroazetidinium (DNAZ) 3,5-dinitrosalicylate (3,5-DNSA) was prepared and the crystal structure has been determined by a four-circle X-ray diffractometer. The thermal behavior of the title compound was studied under a non-isothermal condition by DSC and TG/DTG techniques. The kinetic parameters were obtained from analysis of the TG curves by Kissinger method, Ozawa method, the differential method and the integral method. The kinetic model function in differential form and the value of E _a and A of the decomposition reaction of the title compound are f(α)=4α^3/4, 130.83 kJ mol⁻¹ and 10_13.80s⁻¹, respectively. The critical temperature of thermal explosion of the title compound is 147.55 °C. The values of ΔS ^≠, ΔH ^≠ and ΔG ^≠ of this reaction are −1.35 J mol⁻¹ K₋₁, 122.42 and 122.97 kJ mol⁻¹, respectively. The specific heat capacity of the title compound was determined with a continuous C _p mode of mircocalorimeter. Using the relationship between C _p and T and the thermal decomposition parameters, the time of the thermal decomposition from initiation to thermal explosion (adiabatic time-to-explosion) was obtained.     

Spectroscopic characterization and <Emphasis Type="Italic">Ab initio</Emphasis> calculations of new diazaphosphole and diazaphosphorinane

Phosphoryl chloride is used as a starting material to synthesize new diazaphosphole, (1) and diazaphosphorinane, (2). The products are characterized by ¹H, ¹³C, ³¹P NMR, and IR spectroscopy. A high value ² J(PNH) = 17.0 Hz, 17.2 Hz is measured for two non-equivalent NH protons of endocyclic nitrogen atoms in compound 1, while it greatly decreases to 4.5 Hz in 2. Also, great amounts are obtained for two ² J(P,C) as well as two ³ J(P,C) in the ¹³C NMR spectrum of 1, but they are zero in 2. Here, the effect of ring strain and ring size on the structural and spectroscopic parameters is observed. The ³¹P NMR spectra reveal that δ(³¹P) of compound 1 is far much more downfield (12.63 ppm) relative to that of compound 2 (−10.39 ppm). Furthermore, ab initio quantum chemical calculations are performed to optimize the structures of these molecules by density functional theory (B3LYP) and Hartree-Fock (HF) methods, using the standard 6−31+G** basis set. The stabilization energies are calculated by the equation ΔE _{stabilization} = E _molecule − ΣE _i , where i = atom. To obtain the atomic hybridizations, NBO computations are made at the B3LYP/6−31+G** level. Also, by NMR calculations the ¹H, ¹³C, ³¹P chemical shifts are obtained and compared with the experimental ones.     

Synthesis and tautomeric transformations of 2-(tert-butyl)-1,2,4-benzotriazine-3(2H)-thiones

Treatment of 2-(tert-butyl)-1,2,3,4-benzotetrazinium tetrafluoroborates with sodium thiocyanate afforded 2-(tert-butylazo)phenyl isothiocyanates 3, which exist in equilibrium with 2-(tert-butyl)-1,2,4-benzotriazine-3(2H)-thiones 3′. The equilibrium depends on the substituents R in the benzene ring: the percentage of the open isomer 3 is about 20% for R = H or Me; for R = Cl or Br, the equilibrium is completely shifted to cyclic isomer 3′. The equilibrium is slow on the time scale of the ¹H and ¹³C NMR experiments. For compounds 3a/3′a (R = H), the spectra at 24 °C show two sets of signals, while those at 0 °C contain only signals for isomer 3′a. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1192–1195, July, 2006.     

Rearrangements of cyclopentadienyl cyanates,isocyanates and their thio-,seleno-, and telluro-analogs

Dynamic NMR spectroscopy revealed that pentaphenylcyclopentadienyl isoselenocyanate undergoes reversible hetero-Cope rearrangement (ΔG ^≠ _{408 K} ∼ 22 kcal mol⁻¹, C₆D₅CD₃) giving isomeric selenocyanate in which 1,5-sigmatropic shifts of the SeCN group along the perimeter of the cyclopentadiene ring occur (ΔG ^≠ _{298 K} = 16.7 kcal mol⁻¹, C₆D₅CD₃). On the contrary, pentaphenylcyclopentadienyl iso(thio)cyanates Ph₅C₅NCO and Ph₅C₅NCS are structurally rigid compounds on the NMR time scale. The energy barrier to the 3,3-shift of the isoselenocyanate group in pentaphenylcyclopentadienyl derivative Ph₅C₅NCSe (ΔG _{298 K} ^≠ = 17.9 kcal mol⁻¹) caclulated using the B3LYP/6-31G** method is 7.6 kcal mol⁻¹ lower than for the unsubstituted analog H₅C₅NCSe.     

In situ study of the interaction between <Emphasis Type="Italic">tert</Emphasis>-butyl chloride and aluminum activated with liquid In-Ga eutectic

The interaction between tert-butyl chloride and activated aluminum was studied by attenuated total reflectance Fourier transform infrared spectroscopy near room temperature (18–25°C). A long induction period of ∼240–260 min was observed. The ionic aluminum chloride complexes [Al _n Cl_3n+1]⁻ (n = 1, 2) and the molecular species AlCl₃ were identified at the activated aluminum/tert-butyl chloride interface during the reaction. The formation of the ion in the AlCl₄⁻ ion in the liquid medium and the presence of the same ion and a molecular AlCl₃-tert-butyl chloride complex in the resinous products of the reaction were confirmed by ²⁷Al NMR spectroscopy. The reaction products were analyzed qualitatively by GC/MS. The reactivities of activated aluminum and anhydrous aluminum chloride toward tert-butyl chloride under the same conditions were compared. A distinctive feature of the interaction activated aluminum and tert-butyl chloride is the dominant formation of the AlCl₄⁻ ion. By contrast, the interaction between aluminum chloride and tert-butyl chloride yields the polynuclear ion Al₂Cl₇⁻ and, likely, Al₃Cl₁₀⁻.     

Copper (II) complexes of sterically hindered o-diphenol derivatives: synthesis, characterization and microbiological studies

Cu (II) complexes with the sterically hindered diphenol derivatives 3,5-di(tert-butyl)-1,2-benzenediol (I), 4,6-di(tert-butyl)-1,2,3-benzenetriol (II) and the sulfur-containing 4,6-di(tert-butyl)-3-(2-hydroxyethylsulfanyl)-1,2-benzenediol (III) and 2-[4,6-di(tert-butyl)-2,3-dihydroxyphenylsulfanyl]acetic acid (IV) have been synthesized and characterized by elemental analysis, TG/DTA, FT-IR, ESR, XPS, XPD and conductivity measurements. Compounds I–III can coordinate in their singly deprotonated forms and act as bidentate ligands. These compounds yield Cu (II) complexes of the stoichiometry Cu(L)₂, which have square planar geometry (g_| > g_⊥ > g_e). Unlike them, compound IV behaves as a terdentate ligand, and its complex Cu(L^IV)₂ has distorted octahedral geometry. According to ESR data, only the Cu(L^II)₂ complex contains a very small amount of phenoxyl radicals. Antimicrobial activities of these ligands and their respective Cu (II) complexes have been determined with respect to Gram-positive and Gram-negative bacteria, as well as on yeasts. Their phytotoxic properties against Chlorella vulgaris 157 were also examined.     

Synthesis,crystal structures and thermal decomposition kinetics of four new lanthanide complexes with 3,4-dimethylbenzoic acid and 1,10-phenanthroline

A new series of lanthanide complexes [Ln(3,4-DMBA)₃phen]₂ [Ln(III) = Nd(1), Sm(2), Tb(3) and Dy(4), 3,4-DMBA = 3,4-dimethylbenzoate, phen = 1,10-phenanthroline] have been synthesized and characterized by elemental analysis, infrared spectra and TG-DTG techniques. The single crystals of the complexes 3 and 4 have been obtained and their structures have been determined by single-crystal X-ray diffraction. In the complexes 3 and 4, each Ln(III) ion is coordinated by four bidentate-bridging 3,4-DMBA ligands, one bidentate-chelating 3,4-DMBA group and one bidentate-chelating phen ligand, giving a coordination number of eight. The complex 3 shows bright green luminescence under ultraviolet light in the solid state. Thermal analysis of the complexes 1–4 are discussed by TG-DTG and IR techniques. The non-isothermal kinetics of the complexes 1–4 are investigated by using double equal-double step method. The thermodynamic parameters (ΔH ^≠ , ΔG ^≠ and ΔS ^≠ ) and kinetic parameters (activation energy E and the pre-exponential factor A) of the four complexes are also calculated.     

Structure of Low-Coordinated Phosphorus (III) Compounds Including Phosphorus-Nitrogen Multiple Bond: 13C, 15N and 31P NMR Investigation

Abstract

A wide series of low-coordinated phosphorus (III) compounds including iminophosphines 1, two- 2 or mono-coordinated 3 phosphorus-containing cations, and anion 4, where Mes? = 2,4,6-tris-(tert-butyl)phenyl, has been investigated by ¹³C, ¹⁵N and ³¹P NMR spectroscopy. The spectral parameters obtained are considered in connection with the ab initio (6–31G?) calculation data of the model compounds.     

Crystal structures, luminescent properties and thermal decomposition kinetics of some binuclear lanthanide complexes with 2,3-dichlorobenzoic acid anion and 2,2′-bipyridine

Some binuclear lanthanide complexes with the general formula [Ln(2,3-DClBA)₃bipy]₂ (Ln = Sm(1), Eu(2), Tb(3), Dy(4), and Ho(5); 2,3-DClBA = 2,3-dichlorobenzoate; bipy = 2,2′-bipyridine) were synthesized and characterized by elemental analysis, molar conductance, infrared, ultraviolet, luminescent spectroscopy, thermogravimetry, and different thermogravimetry (TG–DTG) techniques. The single crystals of the complexes have been obtained except the complex 2 and their structures have been determined by single-crystal X-ray diffraction. The four complexes are isostructural and the rare earth ions are all nine coordinated. The two rare earth ions in each complex are linked by two bridging bidentate and two chelating-bridging tridentate carboxylate groups. Under ultraviolet light excitation, the europium and terbium complexes exhibited characteristic red fluorescence of Eu³⁺ ion and green fluorescence of Tb³⁺ ion at room temperature. The non-isothermal kinetics was investigated by using the integral isoconversional non-linear (NL-INT) and the Popescu methods. The mechanism functions of the first decomposition step of the complexes 3–5 were determined. Meanwhile, the thermodynamic parameters (ΔG ^≠ , ΔH ^≠, and ΔS ^≠) at DTG peak temperatures were also calculated.     

Stable Monopyrrole Atropisomers

 Malonic ester derivatives of ethyl and methyl 3,5-dimethyl-4-(1′-iodoneopentyl)-1H-pyrrole-2-carboxylate exhibit restricted rotation about the pyrrole C(4)–C(1′) bond due to the bulky 1′-tert-butyl and malonic ester groups and the ortho effect at C(4) of the sterically crowded 3,5-dimethylpyrrole. The malonates belong to a rare class of atropisomers with restricted rotation about an sp³–sp² C–C bond, and they undergo diastereomeric separation by TLC and crystallization: the diastereomers are stable in solution at room temperature. A crystal of one of the diastereomers, suitable for X-ray crystallography, gave the relative configuration of the chiral axis and stereogenic center at C(1′). Dynamic NMR studies of the purified diastereomers provide kinetic and thermodynamic parameters associated with the atropisomerism: ΔG ^‡ = 132–134 kJ/mol (∼32 kcal/mol) at 383 K in C₂D₂Cl₄ solvent.     

Oxidation of 1,3,7-trimethylxanthine by hypochlorite ion

The kinetics of the oxidative conversion of 1,3,7-trimethylxanthine upon treatment with hypochlorite ions (OCl⁻) in aqueous medium at 283–298 K and pH 8.2 was studied. The reaction order with respect to each component was determined and proved to be 1. It was established that the temperature dependence of the reaction rate follows the Arrhenius equation. The activation parameters of the reaction were measured: E _a = 33.58 kJ/mol, ΔH ^≠ = 31.12 kJ/mol, ΔS ^≠ = −170.02 J/(K mol), ΔG ^≠ = 81.45 kJ/mol. The stoichiometry of the reaction was studied, and the chemistry of the oxidative conversion of caffeine treated with OCl⁻ is discussed.     

Substituent effects on the activation parameters of S<Subscript>N</Subscript>ar reactions

The reaction constants δΔH ^≠ and δΔS ^≠ derived from the dependences of the ΔH ^≠ and ΔS ^≠ activation parameters on substituent constants σ in S_NAr reactions of substituted benzenes with anionic and neutral nucleophiles in various solvents were found to be linearly related upon variation of substituents in the substrate and nucleophile. The δΔH ^≠—δΔS^≠ dependences make it possible to estimate the contribution of the internal enthalpy δΔH^≠ _t into the enthalpy reaction constant δΔH ^≠. The δΔH ^≠ _int values are linearly related to the Hammett p values. Deviations from the linear dependence δΔH≠ _int—n were interpreted in terms of change of the reaction mechanism. Substituent effect on the development of charge in the transition state is determined by the δΔH ^≠ _int value.     

Kinetic study of the promazine oxidation to promazine 5-oxide by trisoxalatocobaltate(III) in basic aqueous media

The kinetics of the oxidation of promazine by trisoxalatocobaltate(III) were studied in the presence of a large excess of the cobalt(III) in tris buffer solution using u.v.–vis spectroscopy ([Co^III] = (0.6 − 2) × 10⁻³ M, [ptz] = 6 × 10⁻⁵ M, pH = 6.6–7.8, I = 0.1 M (NaCl), T = 288−308 K, l = 1 cm). The reaction proceeds via two consecutive reversible steps. In the first step, the reaction leads to formation of cobalt(II) species and a stable cationic radical. In the second step, cobalt(III) is reduced to cobalt(II) ion and a promazine radical is oxidized to the promazine 5-oxide. Linear dependences of the pseudo-first-order rate constants (k ₁ and k ₂) on [Co^III] with a non-zero intercept were established for both redox processes. Rates of reactions decreased with increasing concentration of the H⁺ ion indicating that the promazine and its radical exist in equilibrium with their deprotonated forms, which are reactive reducing species. The activation parameters for reactions studied were as follows: ΔH^≠ = 44 ± 1 kJ mol⁻¹, ΔS^≠ = −100 ± 4 JK⁻¹ mol⁻¹ for the first step and ΔH^≠ = 25 ± 1 kJ mol⁻¹, ΔS^≠ = −169 ± 4 J K⁻¹ mol⁻¹ for the second step, respectively. Mechanistic consequences of all the results are discussed.     

Synthesis,spectroscopic and configurational study,and ab initio calculations of new diazaphospholanes

New 2-substituted diazaphospholane-2-oxides (I-III, V-VIII) and diazaphosphorinane-2-oxide (IV) were synthesised and characterised by ¹H, ¹³C, and ³¹P NMR, IR spectroscopy, and elemental analysis. The presence of chiral diamino groups in compounds II and V–VIII gives rise to various diastereomers so that the ³¹P{¹H} NMR spectra demonstrated three and two peaks with different ratios, respectively. Also, the ¹H and ¹³C{¹H} NMR spectra of compounds II and V–VIII revealed three and two sets of signals for the related conformers (diastereomers). Interestingly, the ³¹P NMR spectrum of V in D₂O indicated a great upfield shift (Δδ = 19.0) for ³¹P relative to the value obtained in DMSO-d₆ (solvent effect). The two signals in V split further to three signals in the presence of β-cyclodextrin. Moreover, conformational analysis of diazaphospholane V was studied by ab initio calculations at the HF and B3LYP levels of theory using the Gaussian 98 program. Results indicated that among four suggested diastereomers (C1–C4) of V, C1 and C3 containing methyl group in the equatorial position are the most stable forms.     

Correlated rotation of aryl substituents in diarylmethyl-, diarylphosphine- and related fragments. An empirical force field study

Summary Ground state structures and conformational interconversion mechanisms of 25 diaryl compoundsAr ₂ Z (Z=CH₂, CHR, CH(OH), P-CH₃) were analyzed. For tetra(ortho-alkyl)substituted diaryls the cogwheeling mechanism was found as the threshold mechanism. A shift from the cogwheeling mechanism to interconversions via 2-ring flips is found in di(ortho-alkyl)substituted compounds. The ground state structures and interconversion mechanisms of diarylmethylphosphines are very similar to those of the related 1,1-diarylethanes. The interconversion barrier for correlated conrotation of the aryl rings in di(tert-butylphenyl)methanol (20) was measured by low temperature NMR and is in excellent agreement with the calculated value for the 2-ring flipT₂ (G (exp.)=48 kJ mol^–1; G (calc.)=54 kJ mol^–1).

---

Korrelierte Rotation von Arylringen in Diarylmethyl-, Diarylphosphin- und verwandten Fragmenten. Eine Untersuchung mit Hilfe der empirischen Kraftfeldmethode

Zusammenfassung Die Grundzustandskonformationen und die konformativen Interkonversions-mechanismen von 25 DiarylverbindungenAr ₂ Z (Z=CH₂, CHR, CH(OH), P-CH₃) wurden analysiert. Für tetra(ortho-alkyl)substituierte Diaryle wurde der cogwheeling-Mechanismus als der Interkonversionsmechanismus niedrigster Energie ermittelt. In di(ortho-alkyl)substituierten Verbindungen werden nicht der cogwheeling-Mechanismus sondern 2-ring flips als Interkonversionsmechanismen gefunden. Die Grundzustände und Interkonversionsmechanismen für Diarylmethylphosphine sind sehr ähnlich jenen der verwandten 1,1-Diarylethane. Die Interkonversionsbarriere für die korrelierte Bewegung der Arylringe von Di(tert-butylphenyl)methanol (20) wurde mittels Tieftemperatur-NMR-Spektroskopie ermittelt und ist in sehr guter Übereinstimmung mit dem berechneten Wert für den 2-Ring flipT₂ (G (exp.)=48 kJ mol^–1; G (calc.)=54 kJ mol^–1).