Single picosecond UV pulse generation by mode-locking of an excimer laser-pumped dye laser

A single picosecond ultraviolet pulse has been generated based on mode-locking of a dye laser pumped by a long pulse XeCl laser to serve as the input source for a high-power ps KrF laser system. A short-pulse uv dye laser (BBQ) pumped by an additional XeCl laser was used to selectively amplify a single pulse from a mode-locked pulse train with the pulse separation of 3.2 ns. The amplified single pulse was frequency-doubled to 248 nm with the pulse duration of 20 ps.     

Pulse properties of a synchronously mode-locked,cavity dumped,picosecond dye laser system

A synchronously mode-locked, cavity-dumped picosecond dye laser is described. The structure and intensity of the picosecond pulses measured under different conditions are reported. It was found that the structure of the pulses from the synchronously pumped dye laser depends critically on the length of the Ar⁺ laser pulses. At the shortest Ar⁺ laser pulses of about 70 ps the dye pulses are as short as 1.1 ps. With Ar⁺ laser pulses of 200 ps the dye laser pulses contains a broad satellite pulse which contains a large fraction of the total intensity. When a cavity dumper is added to the system one gets dye laser pulses 15–20 ps long with a substructure, which indicates incomplete mode-locking. Well mode-locked 1.5–2.0 ps pulses were obtained in the red part of the dye laser action spectrum, i.e. 620–650 nm for R6G, 595–608 nm for R 110 and 657–662 nm for RB, respectively. Addition of mode-locking dyes also improved the pulse quality at some wavelengths.     

10 ps High Power Laser System at 248 nm

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｉｎｒｅｃｅｎｔｙｅａｒｓｔｈｅｒｅｈａｓｂｅｅｎａｎｉｎｔｅｎｓｉｖｅｅｆｆｏｒｔｄｉｒｅｃｔｅｄｔｏｗａｒｄｔｈｅｐｒｏｄｕｃｔｉｏｎｏｆｓｈｏｒｔｐｕｌｓｅ,ｈｉｇｈ ｐｏｗｅｒＵＶｌａｓｅｒｓｙｓｔｅｍｓ .ＫｒＦｌａｓｅｒ,ｗｉｔｈｉｔｓ～ 2ｎｍｂａｎｄｗｉｄｔｈ ,ｈｉｇｈｅｌｅｃｔｒｉｃａｌ ｔｏ ｏｐｔｉｃａｌｃｏｎｖｅｒｓｉｏｎｅｆｆｉｃｉｅｎｃｙａｎｄｉｔｓｕｎｂｏｕｎｄ ｇｒｏｕｎｄｓｔａｔｅ ,ｉｓａｎａｔｔｒａｃｔｉｖｅｃａｎｄｉｄａｔｅｆｏｒｔｈｅ…     

10 ps High Power Laser System at 248 nm

A simple 10 ps KrF laser system consisting of quenched dye laser oscillator pumped by a XeCl laser, a distributed feedback dye laser (DFDL), a three-stage dye amplifier and a two-stage KrF amplifier are described. The output of the laser system is 140 mJ with 10 ps pulse width by using polarization-multiplexing amplification. A focused output laser intensity of about 4×1015 W/cm2 is obtained. The saturation fluence for KrF laser is obtained with this laser.     

A self-quenching picosecond distributed feedback dye laser pumped by a picosecond laser pulse

A tunable single short pulse laser system with a transform–limited bandwidth pumped by a picosecond Nd:YAG laser (ca. 120 ps pulse width) is demonstrated. With this configuration, the relaxation oscillations coming from a distributed feedback dye laser cavity are completely removed. Because the pumping pulsewidth is shorter than the lifetime of dye molecule on the upper laser state, the gain of the laser medium is depleted by the first pulse. The laser wavelength could be precisely tuned with the transform-limited bandwidth (for example, a linewidth of 0.02 nm). After amplification, we obtain a single short laser pulse energy up to 500 μJ at the pulsewidth of 8.2 ps.     

Simple generation of high-power,picosecond, tunable excimer laser pulses

A single excimer laser (a modified commercial oscillation-amplifier combination) is used to pump a dye laser generating a single ps pulse at twice the excimer wavelength and to amplify the frequency-doubled pulse to high peak powers. With XeCl at 308 nm an output pulse energy of 10 mJ with <5 ps pulse width was achieved with <5% ASE energy.     

Generation of tunable subnanosecond laser pulses with a nitrogen laser pumped dye laser amplifier system

A simple method for generating single tunable subnanosecond dye laser pulses is described. A Rhodamin 6G dye laser is transversely pumped by a subnanosecond UV pulse of a TEA nitrogen laser. The narrowband output of the dye laser is amplified and shortened in a synchronously pumped amplifier. Narrowband pulses with a duration of 30–40 ps (fwhm) and a pulse power of 30 kW are obtained. They are tunable over the range of 580–600 nm.     

溴化亚铜激光泵浦的可调谐微微秒染料激光

本文首次报道了利用脉宽为25ns重复率为10kHz的溴化亚铜激光泵浦混有饱和吸收体DODCI的超短腔染料激光,产生出30ps光脉冲.在理论上对混入DODCI的超短腔染料激光脉冲压缩效应作了分析计算,计算结果与实验基本一致.在实验上又通过一个放大-色散系统实现对此染料激光脉冲的同步放大和调谐,并达到傅里叶变换极限.     

Fluctuations in synchronously mode-locked dye lasers

We present detailed experimental data on random fluctuations of the pulse properties of a cw rhodamine 6G dye laser synchronously pumped by an acousto-optically mode-locked argon ion laser. It is shown that quantitative information about the fluctuations of the energy, the pulse repetition time and the duration of the pulses can be obtained from the power spectrum of the laser intensity which is measured with the use of an electronic spectrum analyser. This method is capable of revealing small, subpicosecond temporal pulse jitter. We show that the dye laser pulses exhibit an absolute r.m.s. jitter of 20 ps which is induced by the pump laser. The relative jitter in a dual system can be less than 1 ps because well defined correlations of the output fluctuations exist when two lasers are pumped by a common source.     

Excimer-laser-pumped ps-dye laser

Generation of single dye laser pulses of 12 ps pulse width (FWHM) and 1.2 mJ pulse energy is described using only one XeCl-excimer laser as pump source. At 1 Hz pulse repetition rate the stability of amplitude and pulse width of these pulses is excellent.     

Simple picosecond dye laser system pumped by a frequency doubled,optically compressed Q-switched mode-locked Nd:YAG laser

Using the frequency doubled output of the 3 ps pulses from a temporally compressed cw Q-switched and mode-locked Nd:YAG laser, a simple synchronously pumped dye laser was constructed to give frequency tunable operation with short pulses in the 5–10 ps range and peak powers of ～ 15 kW. A circularly scanning streak camera operating in stroboscopic mode was also used to examine pulse formation in the dye laser.     

300 Femtosecond pulses at 497 nanometer generated by an excimer laser pumped cascade of distributed feedback dye lasers

The setup is a cascade of 3 lasers: A competing cavity dye laser pumped by a XeCl excimer laser, followed by two distributed feedback dye lasers. The typical durations of the pulses from the lasers are 100 ps, 5 ps, and 300 fs, respectively. The output pulses at 497 nm are amplified up to 500 MW. The shortest pulse duration obtained was 198 fs.     

Dual picosecond dye lasers synchronously pumped by a mode locked cw yag laser

The performance of a novel dual dye laser system synchronously pumped by the frequency doubled output of a mode-locked CW-YAG laser is evaluated in relation to pulsewidth, pulse substructure, pulse spectral width and timing jitter. The behavior of the system is adequately described by a theoretical model which includes the time dependent gain and losses due to frequency bandwidth, cavity length mismatch and output coupler. The jitter is significantly reduced from that obtained with CW gas laser pumping as a result of the shorter pump pulse (50 ns instead of ≈100 ps). A routine operating condition uses 2-plate birefringen filters, 0.8 W pump power at 532 nm, to yield two 2.0 ps pulses having a cross correlation width of 3.8 ps, and 30 mW average power from each laser.     

A picosecond dye laser tunable in the 1.1μ m region

We report in this letter the characteristic of a picosecond dye laser, tunable in the 1.08–1.12 μm range. The dye is pumped by the fundamental of a mode-locked Nd-YAG laser. The energy conversion efficiency is higher than 10% and the pulse duration is less than 10 ps.     

A mode-locked dye laser pumped by a xenon ion laser

Passive mode-locking of a rhodamine 6G dye laser has been achieved, using a pulsed xenon ion laser as a pumping source. A pulse width of 5 ps and a peak power of 4 kW have been obtained. Thermal problems were encountered, which adversely affected the operation of the dye laser. Work is in progress to improve these results.     

同步泵浦PML飞秒激光研究

采用CW锁模YAG倍频激光器同步泵浦PML飞秒染料激光器,产生了平均脉宽约55fs、功率为15mW的光脉冲。文章在理论和实验上还研究了同步泵浦飞秒激光脉冲产生技术。     

High power subpicosecond pulse generation from a synchronously pumped dye laser combined with an external compressor

A new scheme of subpicosecond pulse generation based on a dye laser is described. Output pulses of 15 ps from a rhodamine-6G laser pumped synchronously by a frequency-double mode-locked Nd: YAG laser are compressed into 0.8 ps pulses of 2 MW by two passes of saturable absorber (DODCI) and saturable amplifier (rhodamine-6G). The technique is useful for generating widely tunable, high power repetitive subpicosecond pulses.     

Travelling-wave amplified spontaneous emission excited in a prismatic geometry

A new experimental realisation of the travelling-wave amplified spontaneous emission (TWASE) is described utilising a prismatic arrangement to get the pulse front delay in the pump beam. Rhodamine dye solutions were pumped by the amplified 25 ps long 555 nm pulses of a distributed feedback dye laser. The pulse shortening in the TWASE resulted in 12 ps output pulses with 18% energy efficiency. The observed spectrum showed numerous lines, and it contained the amplified Raman line of the pump beam. Several spots were found in the far-field zone of the generated TWASE.     

Picosecond and subpicosecon pulse generation in synchronously pumped mode-locked cw dye lasers

Generation of tunable near-infrared picosecond and subpicosecond pulses in a synchronously pumped cw mode-locked Oxazine-1-perchlorate dye laser has been investigated for different values of the important system parameters. The experimental results confirm the predictions of a simple theoretical model which describes the steady-state pulse duration in terms of gain modulation strength, pump power, intracavity bandwidth, pump pulse length and cavity detuning. For a pump-pulse length of 100 ps and a bandwidth of more than 500 Å for the intracavity tuning element dye-laser pulses as short as 0.35 ps have been obtained. Under these conditions up to 100 mW of average output power were provided. In addition, mode-locking of an Oxazine 750 dye laser by synchronous pumping with the cw train of pulses obtained from the Oxazine-1-Perchlorate laser is reported.     

Simple generation of 400–700 nm picosecond dye laser pulses with nanosecond laser pumping

New results in the experimental study of the spectro-temporal selection (STS) method to produce picosecond dye laser pulses are presented. Adjustability of the picosecond pulse wavelength, possibility of extension of the STS method to different dyes and to UV pump wavelength, stability of the output pulse duration and intensity, and the concentration effect on pulse duration, are reported for the first time. From these results, production of high power picosecond (50–100 ps) dye laser pulses spectrally adjustable between 400 and 700 nm is obtained with a standard nanosecond pump laser, in a compact and simple device.