Synthesis and Characterization of β‐Diketiminate Zinc Complexes

The monomeric β‐diketiminate zinc complex (Mes)NacNacZnMe 1 (MesNacNac = {[2,6‐(2,4,6‐Me₃‐C₆H₂)N(Me)C)]₂CH}) was obtained in almost quantitative yield from the reaction of ZnMe₂ with (Mes)NacNacH. Reaction of 1 with either Me₃NHCl or a solution of HCl in Et₂O yielded (Mes)NacNacZnCl 2 , whereas (Mes)NacNacZnI 3 was obtained from the reaction of 1 with I₂. 1 – 3 were characterized by elemental analyses, mass and multinuclear (¹H, ¹³C{¹H}) NMR spectroscopy, 3·THF also by single crystal X‐ray analysis.     

Synthesis and Characterization of Gallium(III) and Germanium(II) Chlorides Bearing the C6F5‐Substituted β‐Diketiminate HC[(CMe)(NC6F5)]2 Ligand

The germanium(II) and gallium(III) organochlorides containing the C₆F₅‐substituted β‐diketiminate ligand LGeCl ( 2 ) and LGaCl₂ ( 3 ) (L = HC[(CMe)(NC₆F₅)]₂) were synthesized. Salt elimination reactions of the C₆F₅‐substituted β‐diketiminato lithium salt with the corresponding germanium(II) and gallium(III) chlorides led to the organochlorides respectively. Compounds 2 and 3 were characterized by spectroscopic and elemental analyses, and 2 was further investigated by single crystal X‐ray structural analysis.     

Syntheses,and Crystal Structures of Indium Complexes with η2‐Piperidinyldithiocarbamate and η2‐Pyridine‐2‐Thionate Containing Ligands: Structures of [In(η2‐S2CNC5H10)3] and [In(η2‐pyS)3]

The η²‐thio‐indium complexes [In(η²‐thio)₃] (thio = S₂CNC₅H₁₀, 2 ; SNC₄H₄, (pyridine‐2‐thionate, pyS, 3 ) and [In(η²‐pyS)₂(η²‐acac)], 4 , (acac: acetylacetonate) are prepared by reacting the tris(η²‐acac)indium complex [In(η²‐acac)₃], 1 with HS₂CNC₅H₁₀, pySH, and pySH with ratios of 1:3, 1:3, and 1:2 in dichloromethane at room temperature, respectively. All of these complexes are identified by spectroscopic methods and complexes 2 and 3 are determined by single‐crystal X‐ray diffraction. Crystal data for 2 : space group, C2/c with a = 13.5489(8) Å, b = 12.1821(7) Å, c = 16.0893(10) Å, β = 101.654(1)°, V = 2600.9(3) ų, and Z = 4. The structure was refined to R = 0.033 and Rw = 0.086; Crystal data for 3 : space group, P2₁ with a = 8.8064 (6) Å, b = 11.7047 (8) Å, c = 9.4046 (7) Å, β = 114.78 (1)°, V = 880.13(11) ų, and Z = 2. The structure was refined to R = 0.030 and Rw = 0.061. The geometry around the metal atom of the two complexes is a trigonal prismatic coordination. The piperidinyldithiocarbamate and pyridine‐2‐thionate ligands, respectively, coordinate to the indium metal center through the two sulfur atoms and one sulfur and one nitrogen atoms, respectively. The short C‐N bond length in the range of 1.322(4)–1.381(6) Å in 2 and C‐S bond length in the range of 1.715(2)–1.753(6) Å in 2 and 3 , respectively, indicate considerable partial double bond character.     

Synthesis and Characterization of β‐Diketiminate Aluminum Compounds and Their Use in the Ring‐Opening Polymerization of ε‐Caprolactone

Four aluminum alkyl compounds, [CH{(CH₃)CN‐2,4,6‐MeC₆H₂}₂AlMe₂] ( 1 ), [CH{(CH₃)CN‐2,4,6‐MeC₆H₂}₂AlEt₂] ( 2 ), [CH{(CH₃)CN‐2‐iPrC₆H₄}₂AlMe₂] ( 3 ), and [CH{(CH₃)CN‐2‐iPrC₆H₄}₂AlEt₂] ( 4 ), bearing β‐diketiminate ligands [CH{(Me)CN‐2,4,6‐MeC₆H₂}]₂ (L¹H) and [CH{(Me)CN‐2‐ⁱPrC₆H₄}]₂ (L²H) were obtained from the reactions of trimethylaluminum, triethylaluminum with the corresponding β‐diketiminate, respectively. All compounds were characterized by ¹H NMR and ¹³C NMR spectroscopy, single‐crystal X‐ray structural analysis, and elemental analysis. Compounds 1 – 4 were found to catalyze the ring‐opening polymerization (ROP) of ε‐caprolactone (ε‐CL) with good activity.     

Synthesis and Structures of β‐Diketoiminate Complexes of Magnesium

The reaction of the β‐diketoiminate lithium complex (dipp)NacNacLi · OEt₂ ((dipp)NacNac = 2‐((2,6‐diisopropylphenyl)amino)‐4‐((2,6‐diisopropylphenyl)imino)‐pent‐2‐enyl) with iPrMgCl and MgI₂ yield the corresponding (dipp)NacNacMgiPr · OEt₂ ( 1 ) and (dipp)NacNacMgI · OEt₂ ( 2 ). The reaction of 2 with NaBH₄ in diethylether gives (dipp)NacNacMg(μ‐H)₃BH · OEt₂ ( 3 ). The core element of compounds 1 – 3 is a six‐membered ring formed by N(1)–C(1)–C(2)–C(3)–N(2) and magnesium. The structures of 1 and 2 show the β‐diketoiminate backbone in a boat‐conformation with the tetrahedrally coordinated metal center at the prow and the opposing carbon atom at the stern. The magnesium atom in 3 is octahedrally coordinated and out of the β‐diketoiminate plane.     

Synthesis and X‐ray Crystal Structures of Zinc Dichloride Complexes Supported by a β‐Diimine Ligand

β‐Diimine zinc dichloride complexes [CH₂{C(Me)NAr}₂]ZnCl₂ [Ar = Mes ( 1 ), Dipp ( 2 )] were obtained from the reactions of ZnCl₂ with the corresponding β‐iminoamines [ArN(H)C(Me)CHC(Me)NAr]. Complexes 1 and 2 were characterized by multinuclear NMR (¹H, ¹³C) and IR spectroscopy, elemental analyses as well as by single‐crystal X‐ray diffraction. The energy differences between the enamine‐imine tautomers of the β‐iminoamines were quantified by quantum chemical calculations.     

Synthesis of β‐Haloketones by β‐Addition Reactions of α,β‐Unsaturated Ketones with BX3 (X = Br,Cl) as Halide Source

A series of β‐bromoketones and β‐chloroketones were synthesized by the addition reactions of α,β‐unsaturated ketones under BX₃ (X = Br, Cl) and ethylene glycol reaction system. The α,β‐unsaturated ester also was successfully converted to its corresponding β‐bromoester under the reaction condition.     

Synthesis and Crystal Structures of the Molybdenum(II) Complexes with the N,N‐dimethylthiocarbamoyl Containing Ligand: Crystal Structures of β [Mo(CO)2{η2‐S2P(OEt)2}(η2‐SCNMe2)(PPh3)] and [Mo(CO)2(η3‐Tp)(η2‐SCNMe2)(PPh3)]

Reactions of the thiocarbamoyl‐molybdenum complex [Mo(CO)₂(η²‐SCNMe₂)(PPh₃)₂Cl] 1 , and ammonium diethyldithiophosphate, NH₄S₂P(OEt)₂, and potassium tris(pyrazoyl‐1‐yl)borate, KTp, in dichloromethane at room temperature yielded the seven coordinated diethyldithiophosphate thiocarbamoyl‐molybdenum complexe [Mo(CO)₂{η²‐S₂P(OEt)₂}(η²‐SCNMe₂)(PPh₃)] β‐3 , and tris(pyrazoyl‐1‐yl)borate thiocabamoyl‐molybdenum complex [Mo(CO)₂(η³‐Tp)(η²‐SCNMe₂)(PPh₃)] 4 , respectively. The geometry around the metal atom of compounds β‐3 and 4 are capped octahedrons. The α‐ and β‐isomers are defined to the dithio‐ligand and one of the carbonyl ligands in the trans position in former and two carbonyl ligands in the trans position in later. The thiocabamoyl and diethyldithiophosphate or tris(pyrazoyl‐1‐yl)borate ligands coordinate to the molybdenum metal center through the carbon and sulfur and two sulfur atoms, or three nitrogen atoms, respectively. Complexes β‐3 and 4 are characterized by X‐ray diffraction analyses.     

Synthesis,Structure, and Catalytic Behavior of Ytterbium Complexes Derived from a Linked Bis(β‐ketoiminato) Ligand

Ytterbium complexes supported by a linked bis(β‐ketoiminato) ligand, N,N′‐ethylenebis(benzoylacetoimine) (H₂L), were synthesized and their catalytic behavior was explored. The reaction of YbCl₃ with 1 equiv. of LLi₂ afforded the mononuclear ytterbium chloride LYbCl(THF)₂ ( 1 ) in high yield. Complex 1 can be used as starting material to prepare β‐ketoiminate‐ytterbium derivatives. Treatment of complex 1 with NaN(SiMe₃)₂ produced the dimeric ytterbium amide {LYb[N(SiMe₃)₂]}₂ ( 2 ), while the similar reaction of complex 1 with NaOAr (ArO = 2, 6‐tBu‐4‐MeC₆H₂O) led to the mononuclear ytterbium aryloxide LYbOAr(THF) ( 3 ). The three complexes were well detected by elemental analysis and single‐crystal X‐ray analysis. It was found that complexes 2 and 3 can initiate the ring‐opening polymerization of ?‐caprolactone with moderate activity.     

Synthesis of new optically active α,α′,β‐trisubstituted‐β‐lactones as monomers for stereoregular biopolyesters

Various optically active (4R)‐alkyloxycarbonyl‐3,3‐dialkyl‐2‐oxetanones as monomers were synthesized from L‐(S)‐malic acid in six steps to prepare a new family of stereopolyesters for biomedical applications. The synthesis began with an esterification followed of a dialkylation in the aim to introduce hydrophobic groups as methyl or reactive group as allyl. Then, a saponification has permitted to obtain the corresponding diacids that reacted with appropriate alcohols to furnish different monoesters. The last and most important step was activation of hydroxyl group of monoesters with the asymmetric carbon configuration inversion according to the Mitsunobu reaction. Thus, this reaction has provided lactones from monoesters with 100% enantiomeric excess which was confirmed by ¹H NMR and by the synthesis of corresponding isotactic and semicrystalline homopolyesters. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2586–2597     

Microwave‐Assisted Synthesis of β‐Lactams and Cyclo‐β‐dipeptides

Different cyclo‐β‐dipeptides were prepared from corresponding N‐substituted β‐alanine derivatives under mild conditions using PhPOCl₂ as activating agent in benzene and Et₃N as base. To evaluate β³‐substituent influence, the amino acids 7 – 26 were synthesized, and a β‐lactam formation reaction was carried out instead of cyclo‐β‐dipeptide formation. The crystal structures of three derivatives of cyclo‐β‐peptides and one β‐lactam are presented.     

Synthesis of ferrocene‐containing N‐aryloxo β‐ketoiminate lanthanide complexes and polymerization of ε‐caprolactone

The synthesis, characterization and ε‐caprolactone polymerization behavior of lanthanide amido complexes stabilized by ferrocene‐containing N‐aryloxo functionalized β‐ketoiminate ligand FcCOCH₂C(Me)N(2‐HO‐5‐Bu^t‐C₆H₃) (LH₂, Fc = ferrocenyl) are described. The lanthanide amido complexes [LLnN(SiMe₃)₂(THF)]₂ [Ln = Nd ( 1 ), Sm ( 2 ), Yb ( 3 ), Y ( 4 )] were synthesized in good yields by the amine elimination reactions of LH₂ with Ln[N(SiMe₃)₂]₃(µ‐Cl)Li(THF)₃ in a 1:1 molar ratio in THF. These complexes were characterized by IR spectroscopy and elemental analysis, and ¹H NMR spectroscopy was added for the analysis of complex 4 . The definitive molecular structures of complexes 1 and 3 were determined by X‐ray diffraction studies. Complexes 1 – 4 can initiate the ring‐opening polymerization of ε‐caprolactone with moderate activity. Copyright © 2011 John Wiley & Sons, Ltd.     

Sulfamic Acid as a Cost‐Effective and Recyclable Catalyst for β‐Amino Carbonyl Compounds Synthesis

Sulfamic acid was used as a catalyst in the synthesis of β‐amino carbonyl compounds from amines, acetophenone and aldehyde. The reaction was carried out at room temperature. High selectivity, mild reaction temperature, cost‐effective catalyst, simple product separation and catalyst recycle were notable achievements in the reaction. Another feature was that the reaction could be performed on a relatively larger scale to the model reaction (50 times), which also gave good yields. In particular, the first preparation of β, β'‐diamino diketone derivatives via the direct coupling of amines, acetophenone and isophthalic aldehyde promoted by sulfamic acid has been developed.     

Synthesis of Phenanthrene Derivatives through the Reaction of an α,α‐Dicyanoolefin with α,β‐Unsaturated Carbonyl Compounds

Phenanthrene derivatives were prepared by reacting an α,α‐dicyanoolefin with different α,β‐unsaturated carbonyl compounds resulting from Wittig reaction of ninhydrin and phosphanylidene or condensation of barbituric acid and an aldehyde. The easy procedure, mild and metal‐catalyst free, reaction conditions, good yields, and no need for chromatographic purifications are important features of this protocol. The structures of the product of type 3 and 5 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS). A plausible mechanism for this type of reaction is proposed (Scheme 1).     

On the Reactivity of Platina‐β‐diketones – Synthesis and Characterization of Acylplatinum(II) Complexes

The platina‐β‐diketones [Pt₂{(COR)₂H}₂(μ‐Cl)₂] ( 1 , R = Me a , Et b ) react with phosphines L in a molar ratio of 1 : 4 through cleavage of acetaldehyde to give acylplatinum(II) complexes trans‐[Pt(COR)Cl(L)₂] ( 2 ) (R/L = Me/P(p‐FC₆H₄)₃ a , Me/P(p‐CH₂=CHC₆H₄)Ph₂ b , Me/P(n‐Bu)₃ c , Et/P(p‐MeOC₆H₄)₃ d ). 1 a reacts with Ph₂As(CH₂)₂PPh₂ (dadpe) in a molar ratio of 1 : 2 through cleavage of acetaldehyde yielding [Pt(COMe)Cl(dadpe)] ( 3 a ) (configuration index: SP‐4‐4) and [Pt(COMe)Cl(dadpe)] (configuration index: SP‐4‐2) ( 3 b ) in a ratio of about 9 : 1. All acyl complexes were characterized by ¹H, ¹³C and ³¹P NMR spectroscopy. The molecular structures of 2 a and 3 a were determined by single‐crystal X‐ray diffraction. The geometries at the platinum centers are close to square planar. In both complexes the plane of the acyl ligand is nearly perpendicular to the plane of the complex (88(2)° 2 a , 81.2(5)° 3 a ).     

Photolysis of α,β‐Epoxyketones: A Green Synthesis of β‐Hydroxyenones through Tandem H‐Abstraction,Ring Cleavage and Isomerisation

The photochemical behavior of various substituted epoxycarbonyl compounds consisting of more than one possible photo‐labile site (i.e. δ‐hydrogen, β‐hydrogen and epoxide ring) has been investigated. These compounds on photo‐irradiation produced the β‐hydroxyenones in an eco‐friendly green approach. Mechanistically, these photo‐transformations have been envisaged to occur via an intramolecular β‐hydrogen abstraction by the carbonyl group of benzoyl moiety to generate the 1,3‐biradical followed by epoxide ring opening that isomerizes into the photoproducts. The photolysis of the probed epoxy ketones didn’t furnish any photoproduct through δ‐hydrogen abstraction, whatsoever. This exclusive preference for β‐H abstraction over δ‐H abstraction by carbonyl group has been vindicated by the MM2 energy mini‐ mized program for the investigated photochemical substrates. The structures of these photoproducts were established from the analysis of their spectral parameters (IR, ¹H/¹³C NMR and Mass) and single crystal X‐ray crystallography data.